Research on Fault Diagnosis Method for Crankshaft of Drilling Pump Based on Operational Deflection Analysis

2014 ◽  
Vol 989-994 ◽  
pp. 2899-2903
Author(s):  
Feng Feng Bie ◽  
Jun Feng Pei ◽  
Feng Xia Lv
Keyword(s):  
Fault Diagnosis ◽  
Frequency Variation ◽  
Measurement Information ◽  
Feature Extraction Method ◽  
Time Frequency ◽  
Drilling Pump ◽  
Mode Recognition ◽  
Deflection Analysis ◽  
Fault Mode ◽  
State Feature

Crankshaft is the critical component of the drive system of drilling pump. A new state feature extraction method for crankshaft based on operational deflection analysis is presented in this paper. The superiority, feasibility and validity of the system deflection analysis method are figured out with comparison of traditional methods. The vibration deflection technique can supplement with the time-frequency variation of key parts of the crankshaft for the normal measurement information on which the system fault diagnosis is processed. The process illustrates that the method of vibration defection analysis can extract the working state feature entirely and accurately, while provide the valid support for the corresponding fault mode recognition.

Research on a feature extraction method for local faults in planetary gearboxes based on improved dynamic time warping

2021 ◽  
Vol 63 (8) ◽  
pp. 465-471
Author(s):  
Shang Zhiwu ◽  
Yu Yan ◽  
Geng Rui ◽  
Gao Maosheng ◽  
Li Wanxiang
Keyword(s):  
Feature Extraction ◽  
Fault Diagnosis ◽  
Frequency Domain ◽  
Extraction Method ◽  
Dynamic Time Warping ◽  
Spectral Feature ◽  
Time Warping ◽  
Feature Extraction Method ◽  
Time Frequency ◽  
Dynamic Time

Aiming at the local fault diagnosis of planetary gearbox gears, a feature extraction method based on improved dynamic time warping (IDTW) is proposed. As a calibration matching algorithm, the dynamic time warping method can detect the differences between a set of time-domain signals. This paper applies the method to fault diagnosis. The method is simpler and more intuitive than feature extraction methods in the frequency domain and the time-frequency domain, avoiding their limitations and disadvantages. Due to the shortcomings of complex calculation, singularity and poor robustness, the paper proposes an improved method. Finally, the method is verified by envelope spectral feature analysis and the local fault diagnosis of gears is realised.

scholarly journals Mechanical Fault Diagnosis Using Color Image Recognition of Vibration Spectrogram Based on Quaternion Invariable Moment

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Liang Hua ◽  
Yujian Qiang ◽  
Juping Gu ◽  
Ling Chen ◽  
Xinsong Zhang ◽  
...  
Keyword(s):  
Neural Network ◽  
Feature Extraction ◽  
Fault Diagnosis ◽  
Extraction Method ◽  
Learning Algorithm ◽  
Probabilistic Neural Network ◽  
Invariant Moment ◽  
Feature Extraction Method ◽  
Time Frequency ◽  
Neural Network Algorithm

Automatic extraction of time-frequency spectral image of mechanical faults can be achieved and faults can be identified consequently when rotating machinery spectral image processing technology is applied to fault diagnosis, which is an advantage. Acquired mechanical vibration signals can be converted into color time-frequency spectrum images by the processing of pseudo Wigner-Ville distribution. Then a feature extraction method based on quaternion invariant moment was proposed, combining image processing technology and multiweight neural network technology. The paper adopted quaternion invariant moment feature extraction method and gray level-gradient cooccurrence matrix feature extraction method and combined them with geometric learning algorithm and probabilistic neural network algorithm, respectively, and compared the recognition rates of rolling bearing faults. The experimental results show that the recognition rates of quaternion invariant moment are higher than gray level-gradient cooccurrence matrix in the same recognition method. The recognition rates of geometric learning algorithm are higher than probabilistic neural network algorithm in the same feature extraction method. So the method based on quaternion invariant moment geometric learning and multiweight neural network is superior. What is more, this algorithm has preferable generalization performance under the condition of fewer samples, and it has practical value and acceptation on the field of fault diagnosis for rotating machinery as well.

scholarly journals Title Fault Diagnosis Method of Gearbox Multifeature Fusion Based on Quadratic Filter and QPSO-KELM

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Shuo Meng ◽  
Jianshe Kang ◽  
Xupeng Die ◽  
Xiaohan Wu ◽  
Kuo Chi ◽  
...  
Keyword(s):  
Fault Diagnosis ◽  
Health Management ◽  
Training Sample ◽  
Mode Identification ◽  
Time Frequency ◽  
Diagnosis Method ◽  
Fault Mode ◽  
The Time Domain ◽  
Filter Signal ◽  
The Impact

Effective filtering and noise reduction, feature extraction and fault diagnosis, and prognostics technology are important to Prognostics and Health Management (PHM) of equipment. Therefore, a multifeature fusion fault diagnosis method based on the combination of quadratic filtering and QPSO-KELM algorithm is proposed. In the quadratic filtering, stable filtering can reduce the impact of noise and fast-kurtogram can filtrate fault frequency bands with rich fault information. Then, the time-domain, frequency-domain, and time-frequency parameters of the secondary filter signal are extracted. MSSST was used to analyze the filtered signal, and the time-frequency image was obtained. The time-frequency parameter was extracted from the time-frequency image by 2DPCA, and all the extracted parameters are taken as the fusion fault feature of the gearbox. Finally, the fault feature parameters are taken as the training sample and testing sample of QPSO-KELM for training and testing to achieve the purpose of fault diagnosis. The experimental results show that the proposed method can effectively filter the noise, complete the fault mode identification of gearbox, and improve the fault diagnosis accuracy better than other methods.

Separating Multiple Moving Sources by Microphone Array Signals for Wayside Acoustic Fault Diagnosis

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Wei Xiong ◽  
Qingbo He ◽  
Zhike Peng
Keyword(s):  
Fault Diagnosis ◽  
Time Domain ◽  
Feature Matching ◽  
Matching Pursuit ◽  
Microphone Array ◽  
Time Frequency ◽  
Moving Sources ◽  
The Time Domain ◽  
Envelope Spectrum ◽  
Threshold Setting

Wayside acoustic defective bearing detector (ADBD) system is a potential technique in ensuring the safety of traveling vehicles. However, Doppler distortion and multiple moving sources aliasing in the acquired acoustic signals decrease the accuracy of defective bearing fault diagnosis. Currently, the method of constructing time-frequency (TF) masks for source separation was limited by an empirical threshold setting. To overcome this limitation, this study proposed a dynamic Doppler multisource separation model and constructed a time domain-separating matrix (TDSM) to realize multiple moving sources separation in the time domain. The TDSM was designed with two steps of (1) constructing separating curves and time domain remapping matrix (TDRM) and (2) remapping each element of separating curves to its corresponding time according to the TDRM. Both TDSM and TDRM were driven by geometrical and motion parameters, which would be estimated by Doppler feature matching pursuit (DFMP) algorithm. After gaining the source components from the observed signals, correlation operation was carried out to estimate source signals. Moreover, fault diagnosis could be carried out by envelope spectrum analysis. Compared with the method of constructing TF masks, the proposed strategy could avoid setting thresholds empirically. Finally, the effectiveness of the proposed technique was validated by simulation and experimental cases. Results indicated the potential of this method for improving the performance of the ADBD system.

scholarly journals Complex Principal Component Analysis of Antarctic Ice Sheet Mass Balance

2021 ◽  
Vol 13 (3) ◽  
pp. 480
Author(s):  
Jingang Zhan ◽  
Hongling Shi ◽  
Yong Wang ◽  
Yixin Yao
Keyword(s):  
Principal Component Analysis ◽  
Ice Sheet ◽  
Low Frequency ◽  
Principal Component ◽  
Equatorial Pacific ◽  
Mass Change ◽  
Frequency Variation ◽  
Periodic Signal ◽  
Time Frequency ◽  
The Antarctic

Ice sheet changes of the Antarctic are the result of interactions among the ocean, atmosphere, and ice sheet. Studying the ice sheet mass variations helps us to understand the possible reasons for these changes. We used 164 months of Gravity Recovery and Climate Experiment (GRACE) satellite time-varying solutions to study the principal components (PCs) of the Antarctic ice sheet mass change and their time-frequency variation. This assessment was based on complex principal component analysis (CPCA) and the wavelet amplitude-period spectrum (WAPS) method to study the PCs and their time-frequency information. The CPCA results revealed the PCs that affect the ice sheet balance, and the wavelet analysis exposed the time-frequency variation of the quasi-periodic signal in each component. The results show that the first PC, which has a linear term and low-frequency signals with periods greater than five years, dominates the variation trend of ice sheet in the Antarctic. The ratio of its variance to the total variance shows that the first PC explains 83.73% of the mass change in the ice sheet. Similar low-frequency signals are also found in the meridional wind at 700 hPa in the South Pacific and the sea surface temperature anomaly (SSTA) in the equatorial Pacific, with the correlation between the low-frequency periodic signal of SSTA in the equatorial Pacific and the first PC of the ice sheet mass change in Antarctica found to be 0.73. The phase signals in the mass change of West Antarctica indicate the upstream propagation of mass loss information over time from the ocean–ice interface to the southward upslope, which mainly reflects ocean-driven factors such as enhanced ice–ocean interaction and the intrusion of warm saline water into the cavities under ice shelves associated with ice sheets which sit on retrograde slopes. Meanwhile, the phase signals in the mass change of East Antarctica indicate the downstream propagation of mass increase information from the South Pole toward Dronning Maud Land, which mainly reflects atmospheric factors such as precipitation accumulation.

scholarly journals Mechanical Fault Diagnosis of High Voltage Circuit Breakers Based on Wavelet Time-Frequency Entropy and One-Class Support Vector Machine

Entropy ◽  
2015 ◽  
Vol 18 (1) ◽  
pp. 7 ◽  
Author(s):  
Nantian Huang ◽  
Huaijin Chen ◽  
Shuxin Zhang ◽  
Guowei Cai ◽  
Weiguo Li ◽  
...  
Keyword(s):  
Support Vector Machine ◽  
Fault Diagnosis ◽  
High Voltage ◽  
Support Vector ◽  
Circuit Breakers ◽  
Time Frequency
Sign in / Sign up

Export Citation Format

Share Document