Bioactivity of Plasma-Sprayed Diopside Coating In Vitro

A new bioceramic coating based on diopside was prepared by plasma spraying. The surface and cross-section microstructure of the coating were examined by scanning electron microscopy. The thermal expansion coefficient of the diopside coating measured by a dilatometer adapted to that of titanium alloy. The bond strength of the coating was about 32.5 MPa, which is higher than that of HA coatings used in orthopedics and dentistry. The bioactivity of diopside coating was evaluated in vitro. After 15 days soaking in simulated body fluid, an apatite layer was formed on the surface of the coating. The cytocompatibility was investigated by studying the behaviour of human osteoblast cultured directly onto the surface of the coating. MTT assay was performed to assess the influence of the coating on cell proliferation. The morphologies of the cell were observed by SEM after incubation for 1 and 7 days. The results obtained indicated that plasma sprayed diopside coating may be a suitable candidate for bone and dental implant.

Download Full-text

Study of Phosphocalcic Glasses from SiO2-CaO-P2O5 System with and Without Silver II. The bioactivity analysis by FTIR, SEM methods and microbiological study of silver-doped glasses

Revista de Chimie ◽

10.37358/rc.17.6.5639 ◽

2017 ◽

Vol 68 (6) ◽

pp. 1188-1192

Author(s):

Daniela Avram ◽

Nicolae Angelescu ◽

Dan Nicolae Ungureanu ◽

Ionica Ionita ◽

Iulian Bancuta ◽

...

Keyword(s):

Electron Microscopy ◽

Scanning Electron Microscopy ◽

Body Fluid ◽

Pathogenic Bacteria ◽

De Novo ◽

Microbiological Examination ◽

Doped Glasses ◽

P2o5 System ◽

Scanning Electron

The study in vitro of the glass powders bioactivity was performed by soaking them in simulated body fluid for 3 to 21 days at a temperature of 37�C and pH = 7.20. The synthesis de novo of hydroxyapatite, post soaking was confirmed by Fourier Transform Infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The study of the antimicrobial activity was performed by microbiological examination on two strains of pathogenic bacteria involved in postoperative nosocomial infections.

Download Full-text

Chemicovector Effect of Nano-Size-Hydroxyapatite Doped YSZ Ceramics on Apatite Formability in SBF

Key Engineering Materials ◽

10.4028/www.scientific.net/kem.309-311.589 ◽

2006 ◽

Vol 309-311 ◽

pp. 589-592 ◽

Cited By ~ 1

Author(s):

Shigeki Kishi ◽

Norikazu Okimoto ◽

Satoshi Nakamura ◽

Keishi Nishio ◽

Kazuaki Hashimoto ◽

...

Keyword(s):

Electron Microscopy ◽

Scanning Electron Microscopy ◽

Body Fluid ◽

Composite Ceramics ◽

Microscopy Observation ◽

High Mechanical Strength ◽

Improvement Method ◽

Nano Size ◽

Scanning Electron

To produce ceramics with high mechanical strength and bioactivity, we developed the little amount of nano-sized hydroxyapatite (HA)-doped zirconia composite ceramics (nanoHA-Z). The bioactivity of the nanoHA-Z was studied by in vitro estimation with simulated body fluid (SBF). Scanning electron microscopy observation showed deposited bone-like apatite layer entire covering the surface of nanoHA-Z ceramics in SBF. The enhanced apatite formability was attributed to higher Ca and PO4 concentrations in the vicinities of the nanoHA-Z surfaces due to the dissolution of the β-tricalcium phosphate decomposed from the added HA. Utilization of Chemicovector effect was proved to be one of the powerful approaches for improvement method of biomaterials.

Download Full-text

Fibroblasts During Hypertrophic Scar Formation and Resolution

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100072587 ◽

1973 ◽

Vol 31 ◽

pp. 428-429

Author(s):

C. W. Kischer

Keyword(s):

Electron Microscopy ◽

Scanning Electron Microscopy ◽

Cell Proliferation ◽

Fine Structure ◽

Metabolic Activity ◽

Hypertrophic Scar ◽

Normal Skin ◽

Ground Substance ◽

Hypertrophic Scars ◽

Scanning Electron

The morphology of the fibroblasts changes markedly as the healing period from burn wounds progresses, through development of the hypertrophic scar, to resolution of the scar by a self-limiting process of maturation or therapeutic resolution. In addition, hypertrophic scars contain an increased cell proliferation largely made up of fibroblasts. This tremendous population of fibroblasts seems congruous with the abundance of collagen and ground substance. The fine structure of these cells should reflect some aspects of the metabolic activity necessary for production of the scar, and might presage the stage of maturation.A comparison of the fine structure of the fibroblasts from normal skin, different scar types, and granulation tissue has been made by transmission (TEM) and scanning electron microscopy (SEM).

Download Full-text

Scanning Electron Microscopy of Staphylococcus Epidermidis Adherence to Continuous Ambulatory Peritoneal Dialysis Catheters

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100119429 ◽

1985 ◽

Vol 43 ◽

pp. 520-521

Author(s):

William J. Lamoreaux ◽

David L. Smalley ◽

Larry M. Baddour ◽

Alfred P. Kraus

Keyword(s):

Electron Microscopy ◽

Scanning Electron Microscopy ◽

Peritoneal Dialysis ◽

Continuous Ambulatory Peritoneal Dialysis ◽

Staphylococcus Epidermidis ◽

Sterile Saline ◽

Intravascular Devices ◽

Capd Patient ◽

Scanning Electron

Infections associated with the use of intravascular devices have been documented and have been reported to be related to duration of catheter usage. Recently, Eaton et al. reported that Staphylococcus epidermidis may attach to silastic catheters used in continuous ambulatory peritoneal dialysis (CAPD) treatment. The following study presents findings using scanning electron microscopy (SEM) of S. epidermidis adherence to silastic catheters in an in vitro model. In addition, sections of polyvinyl chloride (PVC) dialysis bags were also evaluated by SEM.The S. epidermidis strain RP62A which had been obtained in a previous outbreak of coagulase-negative staphylococcal sepsis at local hospitals was used in these experiments. The strain produced surface slime on exposure to glucose, whereas a nonadherent variant RP62A-NA, which was also used in these studies, failed to produce slime. Strains were grown overnight on blood agar plates at 37°C, harvested from the surface and resuspended in sterile saline (0.85%), centrifuged (3,000 rpm for 10 minutes) and then washed twice in 0.1 M phosphate-buffered saline at pH 7.0. Organisms were resuspended at a concentration of ca. 106 CFU/ml in: a) sterile unused dianeal at 4.25% dextrose, b) sterile unused dianeal at 1.5% dextrose, c) sterile used dialysate previously containing 4.25% dextrose taken from a CAPD patient, and d) sterile used dialysate previously containing 1.5% dextrose taken from a CAPD patient.

Download Full-text

The Mesothelial Cell as a Non-Thrombogenic Surface

Thrombosis and Haemostasis ◽

10.1055/s-0038-1661149 ◽

1984 ◽

Vol 52 (02) ◽

pp. 102-104 ◽

Cited By ~ 25

Author(s):

L J Nicholson ◽

J M F Clarke ◽

R M Pittilo ◽

S J Machin ◽

N Woolf

Keyword(s):

Electron Microscopy ◽

Scanning Electron Microscopy ◽

Blood Flow ◽

Cell Surface ◽

Mesothelial Cell ◽

Mesothelial Cells ◽

Plastic Film ◽

In Vitro System ◽

Scanning Electron

SummaryA technique for harvesting mesothelial cells is described. This entails collagenase digestion of omentum after which the cells can be cultured. The technique has been developed using the rat, but has also been successfully applied to human tissue. Cultured rat mesothelial cells obtained in this way have been examined by scanning electron microscopy. Rat mesothelial cells grown on plastic film have been exposed to blood in an in vitro system using a Baumgartner chamber and have been demonstrated to support blood flow. No adhering platelets were observed on the mesothelial cell surface. Fibroblasts similarily exposed to blood as a control were washed off the plastic.

Download Full-text

Synthesis and Evaluation of AlgNa-g-poly(QCL-co-HEMA) Hydrogels as Platform for Chondrocyte Proliferation and Controlled Release of Betamethasone

International Journal of Molecular Sciences ◽

10.3390/ijms22115730 ◽

2021 ◽

Vol 22 (11) ◽

pp. 5730

Author(s):

Jomarien García-Couce ◽

Marioly Vernhes ◽

Nancy Bada ◽

Lissette Agüero ◽

Oscar Valdés ◽

...

Keyword(s):

Electron Microscopy ◽

Scanning Electron Microscopy ◽

Controlled Release ◽

Biomedical Applications ◽

Release Kinetics ◽

Cell Types ◽

Tissue Engineering Scaffolds ◽

Almost All ◽

Scanning Electron

Hydrogels obtained from combining different polymers are an interesting strategy for developing controlled release system platforms and tissue engineering scaffolds. In this study, the applicability of sodium alginate-g-(QCL-co-HEMA) hydrogels for these biomedical applications was evaluated. Hydrogels were synthesized by free-radical polymerization using a different concentration of the components. The hydrogels were characterized by Fourier transform-infrared spectroscopy, scanning electron microscopy, and a swelling degree. Betamethasone release as well as the in vitro cytocompatibility with chondrocytes and fibroblast cells were also evaluated. Scanning electron microscopy confirmed the porous surface morphology of the hydrogels in all cases. The swelling percent was determined at a different pH and was observed to be pH-sensitive. The controlled release behavior of betamethasone from the matrices was investigated in PBS media (pH = 7.4) and the drug was released in a controlled manner for up to 8 h. Human chondrocytes and fibroblasts were cultured on the hydrogels. The MTS assay showed that almost all hydrogels are cytocompatibles and an increase of proliferation in both cell types after one week of incubation was observed by the Live/Dead® assay. These results demonstrate that these hydrogels are attractive materials for pharmaceutical and biomedical applications due to their characteristics, their release kinetics, and biocompatibility.

Download Full-text