Processing and Characterization of Apatite-Wollastonite Porous Scaffolds for Bone Tissue Engineering

2007 ◽  
Vol 361-363 ◽  
pp. 923-926 ◽  
Author(s):  
David J. Wood ◽  
J. Dyson ◽  
K. Xiao ◽  
Kenny W. Dalgarno ◽  
P. Genever
Keyword(s):  
Selective Laser Sintering ◽  
Glass Ceramics ◽  
Human Mesenchymal Stem Cells ◽  
Biological Properties ◽  
Laser Sintering ◽  
Porous Scaffolds ◽  
Allogenic Bone ◽  
Static Seeding ◽  
Economic Need

There is a clinical and socio-economic need to produce synthetic alternatives to autologous or allogenic bone grafts. Bioactive glasses and glass-ceramics offer great potential in this area. The aims of this study were to optimise production of apatite-wollastonite (A-W) glassceramic scaffolds produced by selective laser sintering, in terms of their physical and biological properties and to look at how human Mesenchymal Stem Cells (MSCs) responded to these 3-D scaffolds in vitro. An indirect selective laser sintering process successfully produced strong, porous scaffolds. Depending upon particle size(s) and infiltration of the porous structure, flexural strengths between 35 MPa and 100 MPa were obtained. Following static seeding of A-W scaffolds with MSCs, fluoresecent actin and nuclei staining, as observed by confocal microscopy, showed that these scaffolds supported the adherence of human MSC’s at time periods of up to 21 days. As such these seeded scaffolds show great potential for use in bone regenerative medicine.

Fabrication of Bioactive Glass-Ceramics by Selective Laser Sintering

2006 ◽  
Vol 309-311 ◽  
pp. 289-292
Author(s):  
Ruth D. Goodridge ◽  
Chikara Ohtsuki ◽  
Masanobu Kamitakahara ◽  
David J. Wood ◽  
Kenny W. Dalgarno
Keyword(s):  
Glass Ceramic ◽  
Selective Laser Sintering ◽  
Glass Ceramics ◽  
Ceramic Materials ◽  
Laser Sintering ◽  
Layer Manufacturing ◽  
Custom Made ◽  
Good Potential

The feasibility of processing glass-ceramics using the layer manufacturing technique, selective laser sintering (SLS), to produce parts with suitable biological and mechanical properties for use in bone replacement applications, has been investigated. Glass-ceramics derived from glasses based on several different systems have been considered. Initial experiments using an apatite-mullite glass-ceramic (4.5SiO2⋅3Al203⋅1.6P2O5⋅3CaO⋅2CaF2) demonstrated the ability to process glass-ceramic materials using this technique, creating parts with a strength similar to that of cancellous bone, and a porous structure that was shown in vivo to be suitable for the ingrowth of bone. Concerns over the inability of the apatite-mullite material to form an apatite layer on its surface when soaked in a simulated body fluid (SBF) has led to the development of Al2O3-free glasses based on the systems (50-x)CaO⋅45SiO2⋅5P2O5⋅xCaF2 and (48-x)CaO⋅45SiO2⋅5P2O5⋅2CaF2⋅xNa2O. These materials have demonstrated good in vitro bioactivity, and therefore have good potential as candidates for processing by an indirect SLS method for the production of custom-made bone implants.

Diopside modified porous polyglycolide scaffolds with improved properties

RSC Advances ◽  
2015 ◽  
Vol 5 (68) ◽  
pp. 54822-54829 ◽  
Author(s):  
Pei Feng ◽  
Xiaoning Guo ◽  
Chengde Gao ◽  
Dan Gao ◽  
Tao Xiao ◽  
...  
Keyword(s):  
Selective Laser Sintering ◽  
Biological Properties ◽  
Laser Sintering ◽  
Porous Scaffolds

In this research, diopside was incorporated into PGA scaffolds for enhancing mechanical and biological properties. The porous scaffolds were fabricated via selective laser sintering.

Selective laser sintering manufacturing of polycaprolactone bone scaffolds for applications in bone tissue engineering

2015 ◽  
Vol 21 (4) ◽  
pp. 386-392 ◽  
Author(s):  
Alida Mazzoli ◽  
C Ferretti ◽  
A Gigante ◽  
E Salvolini ◽  
M Mattioli-Belmonte
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Design Methodology ◽  
Selective Laser Sintering ◽  
Human Mesenchymal Stem Cells ◽  
Laser Sintering ◽  
Porous Scaffolds ◽  
Content Type ◽  
Skeletal Defects

Purpose – The purpose of this study is to show how selective laser sintering (SLS) manufacturing of bioresorbable scaffolds is used for applications in bone tissue engineering. Design/methodology/approach – Polycaprolactone (PCL) scaffolds were computationally designed and then fabricated via SLS for applications in bone and cartilage repair. Findings – Preliminary biocompatibility data were acquired using human mesenchymal stem cells (hMSCs) assuring a satisfactory scaffold colonization by hMSCs. Originality/value – A promising procedure for producing porous scaffolds for the repair of skeletal defects, in tissue engineering applications, was developed.

Manufacture and Characterisation of Bioceramic Tissue Engineering Scaffolds Produced by Selective Laser Sintering

2007 ◽  
Author(s):  
K. Xiao ◽  
J. A. Dyson ◽  
K. W. Dalgarno ◽  
P. Genever ◽  
D. J. Wood ◽  
...  
Keyword(s):  
Glass Ceramic ◽  
Selective Laser Sintering ◽  
Human Mesenchymal Stem Cells ◽  
Biological Properties ◽  
Laser Sintering ◽  
Process Conditions ◽  
Tissue Engineering Scaffolds ◽  
Process Maps ◽  
Bone Replacement ◽  
Porous Bioceramic

Currently there is no adequate bone replacement available that combines a long implant life with complete integration and appropriate mechanical properties. This paper reports on the use of human mesenchymal stem cells (MSCs) to populate porous bioceramic scaffolds produced by selective laser sintering (SLS) to create bespoke bioactive bone replacement structures. Apatite-wollastonite glass ceramic was chosen for use in this study because of its combination of excellent mechanical and biological properties, and has been processed using an indirect SLS approach. Process maps have been developed to identify process conditions for the SLS stage of manufacture and an optimised furnace cycle for the material has been developed to ensure that the required material phases for bioactivity are present in the manufactured scaffold. Results from tissue culture with the MSC’s on the scaffolds (using confocal and scanning electron microscopy) show that MSCs adhere, spread and retain viability on the surface, and penetrate into the pores of apatite wollastonite (A-W) glass ceramic scaffolds over a 21 day culture period. The MSC’s also show strong indications of osteogenesis, indicating that the MSC’s are differentiating to osteoblasts. These results indicate good biocompatibility and osteo supportive capacity of SLS generated A-W scaffolds and excellent potential in bone replacement applications.

scholarly journals Osteoblast-Like Cell Behavior on Porous Scaffolds Based on Poly(styrene) Fibers

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Andrada Serafim ◽  
Romain Mallet ◽  
Florence Pascaretti-Grizon ◽  
Izabela-Cristina Stancu ◽  
Daniel Chappard
Keyword(s):  
Interference Microscopy ◽  
Porous Scaffolds ◽  
Allogenic Bone ◽  
Force Microscopy ◽  
Atomic Force ◽  
Dry Spinning ◽  
Bone Trabeculae ◽  
Large Bone

Scaffolds of nonresorbable biomaterials can represent an interesting alternative for replacing large bone defects in some particular clinical cases with massive bone loss. Poly(styrene) microfibers were prepared by a dry spinning method. They were partially melted to provide 3D porous scaffolds. The quality of the material was assessed by Raman spectroscopy. Surface roughness was determined by atomic force microscopy and vertical interference microscopy. Saos-2 osteoblast-like cells were seeded on the surface of the fibers and left to proliferate. Cell morphology, evaluated by scanning electron microscopy, revealed that they can spread and elongate on the rough microfiber surface. Porous 3D scaffolds made of nonresorbable poly(styrene) fibers are cytocompatible biomaterials mimicking allogenic bone trabeculae and allowing the growth and development of osteoblast-like cellsin vitro.

FABRICATION AND CHARACTERIZATION OF CALCIUM SILICATE SCAFFOLDS FOR TISSUE ENGINEERING

2014 ◽  
Vol 14 (04) ◽  
pp. 1450049 ◽  
Author(s):  
CIJUN SHUAI ◽  
ZHONGZHENG MAO ◽  
ZIKAI HAN ◽  
SHUPING PENG ◽  
ZHENG LI
Keyword(s):  
Tissue Engineering ◽  
Calcium Silicate ◽  
Laser Power ◽  
Selective Laser Sintering ◽  
Biological Properties ◽  
High Temperature Phase ◽  
Temperature Phase ◽  
Conventional Technology

Calcium silicate ( CaSiO 3) is a promising material due to its favorable biological properties. However, it was difficult to fabricate ceramic scaffolds with interconnected porous structure via conventional technology. In present study, CaSiO 3 scaffolds with totally interconnected pores were fabricated via selective laser sintering (SLS). The microstructure, mechanical and biological properties were examined. The results revealed that the powder gradually fused together with the reduction of voids and the elimination of particle boundary as the laser power increased in the range of 3–15 W with scanning electron microscope. Meanwhile the low-temperature phase (β- CaSiO 3) transformed into high-temperature phase (α- CaSiO 3) gradually, which decreased the mechanical properties of the obtained scaffolds. Besides, the compressive strength increased from 12.9 ± 2.34 MPa to 18.19 ± 1.24 MPa (the laser power is 12 w) and then decreased gradually with increasing laser power. In vitro biological properties of CaSiO 3 scaffolds sintered under optimal conditions indicated that the distribution of apatite mineralization became uniform as the amount of them increased after being immersed in simulated body fluids. In the meantime, the thin cytoplasmic extensions of MG-63 cells increased until formed a dense cell layer after 1–5 days of cell culture. The results suggested that the CaSiO 3 scaffold fabricated via SLS has potential application for bone tissue engineering.

scholarly journals Graphene Oxide Oxygen Content Affects Physical and Biological Properties of Scaffolds Based on Chitosan/Graphene Oxide Conjugates

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1142 ◽  
Author(s):  
Iolanda Francolini ◽  
Elena Perugini ◽  
Ilaria Silvestro ◽  
Mariangela Lopreiato ◽  
Anna Scotto d’Abusco ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Mechanical Strength ◽  
Oxygen Content ◽  
Mechanical Stability ◽  
Biological Properties ◽  
Dermal Fibroblasts ◽  
Porous Scaffolds ◽  
Low Oxygen ◽  
Interdisciplinary Field

Tissue engineering is a highly interdisciplinary field of medicine aiming at regenerating damaged tissues by combining cells with porous scaffolds materials. Scaffolds are templates for tissue regeneration and should ensure suitable cell adhesion and mechanical stability throughout the application period. Chitosan (CS) is a biocompatible polymer highly investigated for scaffold preparation but suffers from poor mechanical strength. In this study, graphene oxide (GO) was conjugated to chitosan at two weight ratios 0.3% and 1%, and the resulting conjugates were used to prepare composite scaffolds with improved mechanical strength. To study the effect of GO oxidation degree on scaffold mechanical and biological properties, GO samples at two different oxygen contents were employed. The obtained GO/CS scaffolds were highly porous and showed good swelling in water, though to a lesser extent than pure CS scaffold. In contrast, GO increased scaffold thermal stability and mechanical strength with respect to pure CS, especially when the GO at low oxygen content was used. The scaffold in vitro cytocompatibility using human primary dermal fibroblasts was also affected by the type of used GO. Specifically, the GO with less content of oxygen provided the scaffold with the best biocompatibility.

Fabrication of Bioactive Glass-Ceramics by Selective Laser Sintering

2006 ◽  
pp. 289-292
Author(s):  
Ruth D. Goodridge ◽  
Chikara Ohtsuki ◽  
Masanobu Kamitakahara ◽  
David J. Wood ◽  
Kenny W. Dalgarno
Keyword(s):  
Bioactive Glass ◽  
Selective Laser Sintering ◽  
Glass Ceramics ◽  
Laser Sintering

scholarly journals Fabrication and in vitro evaluation of stable collagen/hyaluronic acid biomimetic multilayer on titanium coatings

2013 ◽  
Vol 10 (84) ◽  
pp. 20130070 ◽  
Author(s):  
Haiyong Ao ◽  
Youtao Xie ◽  
Honglue Tan ◽  
Shengbing Yang ◽  
Kai Li ◽  
...  
Keyword(s):  
Hyaluronic Acid ◽  
Photoelectron Spectroscopy ◽  
Self Assembly ◽  
Human Mesenchymal Stem Cells ◽  
Biological Properties ◽  
Covalent Immobilization ◽  
Layer By Layer ◽  
Titanium Coating ◽  
Assembly Technique

Layer-by-layer (LBL) self-assembly technique has been proved to be a highly effective method to immobilize the main components of the extracellular matrix such as collagen and hyaluronic acid on titanium-based implants and form a polyelectrolyte multilayer (PEM) film by electrostatic interaction. However, the formed PEM film is unstable in the physiological environment and affects the long-time effectiveness of PEM film. In this study, a modified LBL technology has been developed to fabricate a stable collagen/hyaluronic acid (Col/HA) PEM film on titanium coating (TC) by introducing covalent immobilization. Scanning electron microscopy, diffuse reflectance Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy were used to characterize the PEM film. Results of Sirius red staining demonstrated that the chemical stability of PEM film was greatly improved by covalent cross-linking. Cell culture assays further illustrated that the functions of human mesenchymal stem cells, such as attachment, spreading, proliferation and differentiation, were obviously enhanced by the covalently immobilized Col/HA PEM on TCs compared with the absorbed Col/HA PEM. The improved stability and biological properties of the Col/HA PEM covalently immobilized TC may be beneficial to the early osseointegration of the implants.

Selective Laser Sintering of Tissue Engineering Scaffolds Using Poly(L-Lactide) Microspheres

2007 ◽  
Vol 334-335 ◽  
pp. 1225-1228 ◽  
Author(s):  
Wen You Zhou ◽  
S.H. Lee ◽  
Min Wang ◽  
W.L. Cheung
Keyword(s):  
Tissue Engineering ◽  
Porous Scaffold ◽  
Selective Laser Sintering ◽  
Laser Sintering ◽  
Porous Scaffolds ◽  
Tissue Engineering Scaffolds ◽  
Water Emulsion ◽  
Bed Temperature ◽  
Oil In Water Emulsion ◽  
Polyamide Powder

This paper reports a study on the modification of a commercial selective laser sintering (SLS) machine for the fabrication of tissue engineering scaffolds from small quantities of poly(L-lactide) (PLLA) microspheres. A miniature build platform was designed, fabricated and installed in the build cylinder of a Sinterstation 2000 system. Porous scaffolds in the form of rectangular prism, 12.7×12.7×25.4 mm3, with interconnected square and round channels were designed using SolidWorks. For initial trials, DuraFormTM polyamide powder was used to build scaffolds with a designed porosity of ~70%. The actual porosity was found to be ~83%, which indicated that the sintered regions were not fully dense. PLLA microspheres in the size range of 5-30 μm were made using an oil-in-water emulsion solvent evaporation procedure and they were suitable for the SLS process. A porous scaffold was sintered from the PLLA microspheres with a laser power of 15W and a part bed temperature of 60oC. SEM examination showed that the PLLA microspheres were partially melted to form the scaffold. This study has demonstrated that it is feasible to build tissue engineering scaffolds from small amounts of biomaterials using a commercial SLS machine with suitable modifications.

Sign in / Sign up

Export Citation Format

Share Document