The Insulated Effect of New Inorganic Coatings on the Surface of Fiber Paper

2008 ◽  
Vol 373-374 ◽  
pp. 682-685
Author(s):  
Fei He ◽  
Xiao Dong He ◽  
J.F. Li ◽  
Ming Wei Li ◽  
S.M. Zhang

The unitary thermal insulation fiber materials can not satisfy rigorous high temperature environment usually. New inorganic coatings were prepared by adding SiO2 aerogels super-insulation powder into high temperature adhesive. Aerogels are high dispersive solid materials which consist of colloid particles or high polymer molecule and have continuous random network structure filling with gaseous dispersive medium. The coatings with super insulation function were made by means of adding thermal-proof materials to the coatings. The microstructure of light porous power and the states of coatings on the surface of fiber paper under different state were observed by scanning electron microscope (SEM). The insulated effect of the composite materials was tested by considering thermal conductivity. On the basis of this, the coatings on the surface of fiber paper were optimized according to the material thermal-insulation performance and the materials that could be satisfactory to the service conditions were made in the end. The results show that silica aerogels powder is dispersed equably in high temperature adhesive. The new inorganic coatings possess themselves of good thermal-insulation effect and can be used as insulated space-layers. The insulation ability of fiber paper is improved obviously.

2021 ◽  
Vol 2095 (1) ◽  
pp. 012070
Author(s):  
Kaiben Yu ◽  
Le Zong ◽  
Shengqi Yu ◽  
Qingjian Meng ◽  
Baohua Liu

Abstract In this paper, a thermal insulation structure with silica aerogel felt as filler material was designed for the requirements of deep-sea fluid thermal insulation sampling technology for Jiaolong human occupied vehicle. Simulation analysis of thermal insulation performance was carried out and an experimental prototype was developed for the thermal insulation structure. Experimental study on thermal insulation performance was conducted with the variation characteristics of the operation environment for Jiaolong human occupied vehicle being taken into account. Results show that the silica aerogel felt with a thickness of 30 mm filled in the radial space between the inner and outer cylinders can achieve the expected thermal insulation effect during the diving-sampling-transferring process, with maximum temperature rise of 8.5 °C, and can meet the requirements of deep-sea fluid thermal insulation sampling technology.


2018 ◽  
Vol 38 (4) ◽  
pp. 458-467 ◽  
Author(s):  
Akun Liang ◽  
Yinjuan Liu ◽  
Hao Liang ◽  
Fangming Liu ◽  
Cong Fan ◽  
...  

2020 ◽  
Vol 185 ◽  
pp. 108217 ◽  
Author(s):  
Haixia Yang ◽  
Chunming Li ◽  
Xiandong Yue ◽  
Jianchun Huo ◽  
Feng Ye ◽  
...  

2017 ◽  
Vol 727 ◽  
pp. 871-878 ◽  
Author(s):  
Vinayak G. Parale ◽  
Hae-Noo-Ree Jung ◽  
Wooje Han ◽  
Kyu-Yeon Lee ◽  
Dinesh B. Mahadik ◽  
...  

Coatings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 907
Author(s):  
Zhan Yu ◽  
Bo Song ◽  
Ping Ma ◽  
Wenhui Fan ◽  
Enzhong Gong ◽  
...  

In automotive technology, the proper use of thermal insulation materials helps improve the performance and life of internal equipment and reduce maintenance cost. In this study, plasma spraying and flame spraying are used to prepare and coat a new MgO-B2O3-SiO2-Zn powder on the SUS304 substrate. The resulting coating as thermal insulation layer formed a networked microstructure between the substrates to improve the thermal insulation performance of the material. By validation of thermal radiation experiments, the thermal insulation effects of various ceramic powders were compared, the high-temperature and low-temperature thermal insulation materials for about 300 and 100 °C were determined, and the thermal insulation performance of the constructed material coatings was verified by analysis.


2016 ◽  
Vol 697 ◽  
pp. 445-448
Author(s):  
Hao Ran Sun ◽  
Si Chao Zhang ◽  
Shu Guang Chen ◽  
Guang Hai Wang ◽  
Liu Shi Tao ◽  
...  

In this paper, effect of moisture absorption on high temperature thermal insulation performance of fiber insulation material is studied. Fiber material is stored in 40°C through a long period of time, then spontaneous moisture absorption of fiber material is measured. According this test result, 20% and 40% moisture absorption content gradient are determined. Pore distribution and high temperature thermal insulation property of samples of 20% and 40% moisture absorption and the dry samples are all tested in this study. The internal pore size distribution of fiber insulation material after moisture absorbing has a certain coarsening. Fiber material after moisture absorbing will make its pore size become large. And oxygen acetylene test results showed that: the larger moisture absorption, the more slowly the initial temperature rises. Fiber material after moisture absorbing will make its low temperature thermal insulation performance reduce, but it has little impact of its high temperature thermal insulation performance.


2019 ◽  
Vol 11 (12) ◽  
pp. 1692-1698 ◽  
Author(s):  
Haixia Yang ◽  
Jianchun Huo ◽  
Chunming Li ◽  
Feng Ye ◽  
Jingxiao Liu ◽  
...  

The microtexture, microstructure evolution and thermal insulation performance of carbon aerogels subjected to high-temperature treatment were investigated in detail. The results showed that carbon aerogels derived from resorcinol-formaldehyde (RF) resin were composed of fine particles and cavities, which consisted of typical non-graphitized carbon according to X-ray diffraction analysis. The microcrystallite size (La) of the CAs increased from 4.49 nm to 6.92 nm, and the specific surface area (SBET) and the total pore volume (Vtal) decreased from 727 to 290 m2/g and from 0.963 to 0.543 cm3/g, respectively, as the temperature increased from 900 °C to 1800 °C. The micropore-specific surface area and the micropore volume decreased with increasing treatment temperature, and a small amount of macropores (>50 nm) appeared at a temperature of 1500 to 1800 °C. The carbon aerogels retained their porous structure at higher temperature, which indicated that they hold potential for application in the field of thermal insulation in high-temperature environments.


Sign in / Sign up

Export Citation Format

Share Document