Improving Bioactivity of Porous β-TCP Ceramics by Forming Bone-Like Apatite Layer on the Surfaces of Pore Walls

2012 ◽  
Vol 512-515 ◽  
pp. 1815-1820
Author(s):  
Qing Feng Zan ◽  
Yuan Zhuang ◽  
Li Min Dong ◽  
Chen Wang ◽  
Ning Wen ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Cell Attachment ◽  
Apatite Layer ◽  
Porous Scaffolds ◽  
Tissue Engineering Scaffolds ◽  
Naoh Solution ◽  
Pre Treatment ◽  
Cells Cultured

Bone tissue engineering provides a new way to repair the bone defect in orthopaedics. The scaffolds, porous materials with excellent biocompatibility, bioactivity and biodegradability, play an important role in bone tissue engineering. Furthermore, the bioactivity of the pore interior surfaces is very important for cell attachment, differentiation and growth, as well as new bone tissue ingrowth into pores. In this paper, β-TCP was selected as materials of scaffolds, and its bioactivity was improved by activating the interior surfaces of pore walls. The porous β-TCP scaffolds with about 50~300μm of pore size and above 80% of porosity were obtained by 3D-gel-laminated processing. Their surfaces of the scaffolds were easily covered by a low crystallized bone-like apatite layer, which determined by XRD and FTIR, after immersing in 1.5SBF solution following pre-treatment by NaOH solution. MTT and ALP assays were performed after cells cultured on the porous scaffolds with bone-like structure, and the results showed higher proliferation rate and differentiation level than that on the scaffolds without treatment, which indicated that the porous β-TCP scaffolds with bone-like apatite layer on surfaces of pore walls possess higher bioactivity. Therefore, the bioactivity of tissue engineering scaffolds could be improved by deposited bone-like apatite layer on their surfaces.

APPLICATIONS OF CALCIUM PHOSPHATE NANOPARTICLES IN POROUS HARD TISSUE ENGINEERING SCAFFOLDS

NANO ◽  
2012 ◽  
Vol 07 (04) ◽  
pp. 1230004 ◽  
Author(s):  
ZHE WANG ◽  
ZHURONG TANG ◽  
FANGZHU QING ◽  
YOULIANG HONG ◽  
XINGDONG ZHANG
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Porous Scaffolds ◽  
Tissue Engineering Scaffolds ◽  
Important Approach ◽  
Calcium Phosphate Nanoparticles ◽  
Hard Tissue Engineering

To repair bone defects, an important approach is to fabricate tissue engineering scaffolds as substitutions to replace auto-/allologous bones. Currently, processing a biomaterial into three-dimensional porous scaffolds and incorporating the calcium phosphate (Ca–P) nanoparticles into scaffolds profile two main characteristics of bone tissue engineering scaffolds. Based on this fact, in this paper we describe the design principles of the Ca–P nanoparticle-based and porous bone tissue engineering scaffolds. Then we summarize a variety of the Ca–P nanoparticle-based scaffolds, including discussion of the integration of the Ca–P nanoparticles with ceramics and polymers, followed by introduction of safety of the Ca–P nanoparticles in scaffolds.

scholarly journals Synthetic Biodegradable Aliphatic Polyester Nanocomposites Reinforced with Nanohydroxyapatite and/or Graphene Oxide for Bone Tissue Engineering Applications

Nanomaterials ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 590 ◽  
Author(s):  
Yuchao Li ◽  
Chengzhu Liao ◽  
Sie Chin Tjong
Keyword(s):  
Tissue Engineering ◽  
Graphene Oxide ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Cell Attachment ◽  
Porous Scaffolds ◽  
Aliphatic Polyester ◽  
Engineering Applications ◽  
Aliphatic Polyesters ◽  
Nanocomposite Scaffolds

This paper provides review updates on the current development of bionanocomposites with polymeric matrices consisting of synthetic biodegradable aliphatic polyesters reinforced with nanohydroxyaptite (nHA) and/or graphene oxide (GO) nanofillers for bone tissue engineering applications. Biodegradable aliphatic polyesters include poly(lactic acid) (PLA), polycaprolactone (PCL) and copolymers of PLA-PGA (PLGA). Those bionanocomposites have been explored for making 3D porous scaffolds for the repair of bone defects since nHA and GO enhance their bioactivity and biocompatibility by promoting biomineralization, bone cell adhesion, proliferation and differentiation, thus facilitating new bone tissue formation upon implantation. The incorporation of nHA or GO into aliphatic polyester scaffolds also improves their mechanical strength greatly, especially hybrid GO/nHA nanofilllers. Those mechanically strong nanocomposite scaffolds can support and promote cell attachment for tissue growth. Porous scaffolds fabricated from conventional porogen leaching, and thermally induced phase separation have many drawbacks inducing the use of organic solvents, poor control of pore shape and pore interconnectivity, while electrospinning mats exhibit small pores that limit cell infiltration and tissue ingrowth. Recent advancement of 3D additive manufacturing allows the production of aliphatic polyester nanocomposite scaffolds with precisely controlled pore geometries and large pores for the cell attachment, growth, and differentiation in vitro, and the new bone formation in vivo.

Preparation and characterization of porous hydroxyapatite/β-cyclodextrin-based polyurethane composite scaffolds for bone tissue engineering

2018 ◽  
Vol 33 (3) ◽  
pp. 402-409 ◽  
Author(s):  
Jingjing Du ◽  
Shuchun Gan ◽  
Qihao Bian ◽  
Duhan Fu ◽  
Yan Wei ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Bone Repair ◽  
Cell Attachment ◽  
Hexamethylene Diisocyanate ◽  
Porous Scaffolds ◽  
Composite Scaffolds ◽  
Porous Hydroxyapatite ◽  
Polyurethane Composite

In this study, novel porous scaffolds containing hydroxyapatite and β-cyclodextrin-based polyurethane were first successfully fabricated by polymerizing β-cyclodextrin with hexamethylene diisocyanate and hydroxyapatite in situ for bone tissue engineering. The physicochemical and mechanical properties as well as cytocompatibility of porous scaffolds were investigated. The results showed that polyurethane reinforced with hydroxyapatite composites had cancellous bone-like porous structure. The mechanical strength of the scaffolds increased with increasing the hydroxyapatite content in scaffolds. Synthesized scaffolds (PU1, PUHA1, PU2, and PUHA2) presented compressive strength values of 0.87 ± 0.24 MPa, 1.81 ± 0.10 MPa, 6.16 ± 0.89 MPa, and 12.95 ± 2.05 MPa, respectively. The pore size and porosity of these scaffolds were suitable for bone regeneration. Cytocompatibility of composite scaffolds was proven via favorable interactions with MC3T3-E1 cells. The addition of hydroxyapatite into CD-based polyurethane scaffolds improved cell attachment, well-spread morphology, and higher proliferation. The hydroxyapatite-polyurethane scaffolds have the potential to be applied in bone repair and regeneration.

Poly-l-lysine-coated PLGA/poly(amino acid)-modified hydroxyapatite porous scaffolds as efficient tissue engineering scaffolds for cell adhesion, proliferation, and differentiation

2019 ◽  
Vol 43 (25) ◽  
pp. 9989-10002 ◽  
Author(s):  
Shuang Zheng ◽  
Yonghong Guan ◽  
Haichi Yu ◽  
Ge Huang ◽  
Changjun Zheng
Keyword(s):  
Tissue Engineering ◽  
Cell Adhesion ◽  
Amino Acid ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Cell Function ◽  
Porous Scaffolds ◽  
Tissue Engineering Scaffolds ◽  
Proliferation And Differentiation

Ideal bone tissue engineering scaffolds should be biocompatible, biodegradable, and mechanically robust and have the ability to regulate cell function.

Selective Laser Sintering of Polycaprolactone Bone Tissue Engineering Scaffolds

2004 ◽  
Vol 845 ◽  
Author(s):  
Brock Partee ◽  
Scott J. Hollister ◽  
Suman Das
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Cell Attachment ◽  
Selective Laser Sintering ◽  
Laser Sintering ◽  
Engineering Practice ◽  
Micro Computed Tomography ◽  
Tissue Engineering Scaffolds ◽  
Differentiation And Proliferation

ABSTRACTPresent tissue engineering practice requires porous, bioresorbable scaffolds to serve as temporary 3D templates to guide cell attachment, differentiation, and proliferation. Recent research suggests that scaffold material and internal architecture significantly influence regenerate tissue structure and function. However, lack of versatile biomaterials processing methods have slowed progress towards fully testing these findings. Our research investigates using selective laser sintering (SLS) to fabricate bone tissue engineering scaffolds. Using SLS, we have fabricated polycaprolactone (PCL) and polycaprolactone/tri-calcium phosphate composite scaffolds. We report on scaffold design and fabrication, mechanical property measurements, and structural characterization via optical microscopy and micro-computed tomography.

HYDROXYAPATITE, ALGINATE, AND CHITOSAN FOR BONE SCAFFOLDS: SPECTROSCOPY STUDY

2016 ◽  
Vol 19 (2) ◽  
pp. 93-100
Author(s):  
Lalita El Milla
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Functional Groups ◽  
Bone Growth ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Tissue Engineering Scaffolds ◽  
Hydroxyapatite Powder ◽  
Materials Used

Scaffolds is three dimensional structure that serves as a framework for bone growth. Natural materials are often used in synthesis of bone tissue engineering scaffolds with respect to compliance with the content of the human body. Among the materials used to make scafffold was hydroxyapatite, alginate and chitosan. Hydroxyapatite powder obtained by mixing phosphoric acid and calcium hydroxide, alginate powders extracted from brown algae and chitosan powder acetylated from crab. The purpose of this study was to examine the functional groups of hydroxyapatite, alginate and chitosan. The method used in this study was laboratory experimental using Fourier Transform Infrared (FTIR) spectroscopy for hydroxyapatite, alginate and chitosan powders. The results indicated the presence of functional groups PO43-, O-H and CO32- in hydroxyapatite. In alginate there were O-H, C=O, COOH and C-O-C functional groups, whereas in chitosan there were O-H, N-H, C=O, C-N, and C-O-C. It was concluded that the third material containing functional groups as found in humans that correspond to the scaffolds material in bone tissue engineering.

scholarly journals Development of Biopolymeric Hybrid Scaffold-Based on AAc/GO/nHAp/TiO2 Nanocomposite for Bone Tissue Engineering: In-Vitro Analysis

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1319
Author(s):  
Muhammad Umar Aslam Khan ◽  
Wafa Shamsan Al-Arjan ◽  
Mona Saad Binkadem ◽  
Hassan Mehboob ◽  
Adnan Haider ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Guar Gum ◽  
Porous Scaffolds ◽  
Vitro Assay ◽  
Vitro Analysis ◽  
Nanocomposite Scaffolds

Bone tissue engineering is an advanced field for treatment of fractured bones to restore/regulate biological functions. Biopolymeric/bioceramic-based hybrid nanocomposite scaffolds are potential biomaterials for bone tissue because of biodegradable and biocompatible characteristics. We report synthesis of nanocomposite based on acrylic acid (AAc)/guar gum (GG), nano-hydroxyapatite (HAp NPs), titanium nanoparticles (TiO2 NPs), and optimum graphene oxide (GO) amount via free radical polymerization method. Porous scaffolds were fabricated through freeze-drying technique and coated with silver sulphadiazine. Different techniques were used to investigate functional group, crystal structural properties, morphology/elemental properties, porosity, and mechanical properties of fabricated scaffolds. Results show that increasing amount of TiO2 in combination with optimized GO has improved physicochemical and microstructural properties, mechanical properties (compressive strength (2.96 to 13.31 MPa) and Young’s modulus (39.56 to 300.81 MPa)), and porous properties (pore size (256.11 to 107.42 μm) and porosity (79.97 to 44.32%)). After 150 min, silver sulfadiazine release was found to be ~94.1%. In vitro assay of scaffolds also exhibited promising results against mouse pre-osteoblast (MC3T3-E1) cell lines. Hence, these fabricated scaffolds would be potential biomaterials for bone tissue engineering in biomedical engineering.

scholarly journals THREE-DIMENSIONAL NANOCOMPOSITE SCAFFOLDS FOR BONE TISSUE ENGINEERING: FROM DESIGN TO APPLICATION

Nano LIFE ◽  
2012 ◽  
Vol 02 (01) ◽  
pp. 1250005 ◽  
Author(s):  
BIN DUAN ◽  
MIN WANG ◽  
WILLIAM W. LU
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Rabbit Model ◽  
Bone Morphogenetic Protein 2 ◽  
Human Umbilical Cord ◽  
Porous Structures ◽  
Tissue Engineering Scaffolds ◽  
Surface Modified ◽  
Nanocomposite Scaffolds

Selective laser sintering (SLS), a rapid prototyping technology, was investigated for producing bone tissue engineering scaffolds. Completely biodegradable osteoconductive calcium phosphate (Ca-P)/poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) scaffolds were successfully fabricated via SLS using Ca-P/PHBV nanocomposite microspheres. In the SLS manufacturing route, the architecture of tissue engineering scaffolds (pore shape, size, interconnectivity, etc.) can be designed and the sintering process can be optimized for obtaining scaffolds with desirable porous structures and mechanical properties. SLS was also shown to be very effective in producing highly complex porous structures using nanocomposite microspheres. To render SLS-formed Ca-P/PHBV scaffolds osteoinductive, recombinant human bone morphogenetic protein-2 (rhBMP-2) could be loaded onto the scaffolds. For achieving a controlled release of rhBMP-2 from scaffolds, surface modification of Ca-P/PHBV scaffolds by gelatin entrapment and heparin immobilization was needed. The immobilized heparin provided binding affinity for rhBMP-2. Surface modified Ca-P/PHBV nanocomposite scaffolds loaded with rhBMP-2 enhanced the proliferation of human umbilical cord derived mesenchymal stem cells (hUCMSCs) and also their alkaline phosphatase activity. In in vivo experiments using a rabbit model, surface modified Ca-P/PHBV nanocomposite scaffolds loaded with rhBMP-2 promoted ectopic bone formation, exhibiting their osteoinductivity. The strategy of combining advanced scaffold fabrication, nanocomposite material, and controlled growth factor delivery is promising for bone tissue regeneration.

Sign in / Sign up

Export Citation Format

Share Document