Prediction and Measurement of Lamb Wave from Debondings at Structural Features in Composite Laminates

2013 ◽  
Vol 558 ◽  
pp. 139-148 ◽  
Author(s):  
Ching Tai Ng ◽  
Martin Veidt
Keyword(s):  
Lamb Wave ◽  
Composite Laminates ◽  
Wave Scattering ◽  
Three Dimensional ◽  
Scattered Wave ◽  
Structural Features ◽  
Complex Structures ◽  
Detection Techniques ◽  
Fe Simulations ◽  
Good Agreement

The interaction of the fundamental anti-symmetric Lamb wave (A0) with debondings at structural features is investigated using experimental data and finite element (FE) simulations. In this study explicit three-dimensional (3D) FE simulations are employed, which allows the study of the scattered wave along different propagation directions. Good agreement between the FE predictions and the measurements are obtained that demonstrates that the 3D FE scattering model is able to accurately predict the Lamb wave scattering characteristics at debondings. The study show that the characteristics of Lamb wave reflected from the debondings at the structure feature is much more complicated than that from defects in flat composite laminates. Parameter studies show that the backward and forward scattering coefficient of Lamb wave is a function of debonding size to wavelength ratio and debonding location. This shows the potential of employing Lamb wave to identify the size and monitor the growth of the debondings. The findings of the study provide improved physical insights into the scattering phenomena, which are important to further advance damage detection techniques for complex structures made by composite laminates.

scholarly journals Wave Propagation Analysis in Composite Laminates Containing a Delamination Using a Three-Dimensional Spectral Element Method

2012 ◽  
Vol 2012 ◽  
pp. 1-19 ◽  
Author(s):  
Fucai Li ◽  
Haikuo Peng ◽  
Xuewei Sun ◽  
Jinfu Wang ◽  
Guang Meng
Keyword(s):  
Wave Propagation ◽  
Lamb Wave ◽  
Composite Laminates ◽  
Composite Structures ◽  
Spectral Element Method ◽  
Three Dimensional ◽  
Spectral Element ◽  
Wave Mode ◽  
Diagonal Form ◽  
Element Method

A three-dimensional spectral element method (SEM) was developed for analysis of Lamb wave propagation in composite laminates containing a delamination. SEM is more efficient in simulating wave propagation in structures than conventional finite element method (FEM) because of its unique diagonal form of the mass matrix. Three types of composite laminates, namely, unidirectional-ply laminates, cross-ply laminates, and angle-ply laminates are modeled using three-dimensional spectral finite elements. Wave propagation characteristics in intact composite laminates are investigated, and the effectiveness of the method is validated by comparison of the simulation results with analytical solutions based on transfer matrix method. Different Lamb wave mode interactions with delamination are evaluated, and it is demonstrated that symmetric Lamb wave mode may be insensitive to delamination at certain interfaces of laminates while the antisymmetric mode is more suited for identification of delamination in composite structures.

Numerical Simulation of Welding for Vice-Frame Components

2010 ◽  
Vol 160-162 ◽  
pp. 220-225 ◽  
Author(s):  
Zheng Zhi Luo ◽  
Yi Su Pan
Keyword(s):  
Three Dimensional ◽  
Welding Process ◽  
Side Wall ◽  
Element Model ◽  
Simulation Method ◽  
Front Wall ◽  
Complex Structures ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element ◽  
Good Agreement

In this article the application possibilities of welding simulation for vice-frame components are discussed. A three dimensional finite element model has been developed to dynamically simulate the welding process. The investigations focus on the simulation of the model construction and the welding effect on distortions and its stress. Comparisons of experimental and numerical results show good agreement and that the simulation method is reasonable. The vice-frame is a casting component that comes from a goods wagon bogie. So the procedure of the vice-frame simulation can be used for more complex structures like the side-wall, front-wall, roof, floor plate, and so on. It can help that optimize the welding process and improve the welding quality.

Methods for making stereoslides and -prints, with freeze-etched olfactory epithelium as example

1984 ◽  
Vol 42 ◽  
pp. 704-705
Author(s):  
Bert Ph. M. Menco ◽  
Ido F. Menco ◽  
Frans L.T. Verdonk
Keyword(s):  
Electron Microscope ◽  
Olfactory Epithelium ◽  
Three Dimensional ◽  
Supporting Cell ◽  
Structural Features ◽  
Extensive Study ◽  
Sprague Dawley ◽  
Freezing Method ◽  
Respiratory Epithelia ◽  
Three Dimensional Presentation

Previously we presented an extensive study of the distributions of intramembranous particles of structures in apical surfaces of nasal olfactory and respiratory epithelia of the Sprague-Dawley rat. For the same structures these distributions were compared in samples which were i) chemically fixed and cryo-protected with glycerol before cryo-fixation, after excision, and ii)ultra-rapidly frozen by means of the slam-freezing method. Since a three-dimensional presentation markedly improves visualization of structural features micrographs were presented as stereopairs. Two exposures were made by tiling the sample stage of the electron microscope 6° in either direction with an eucentric goniometer. The negatives (Agfa Pan 25 Professional) were reversed with Kodak Technical Pan Film 2415 developed in D76 1:1. The prints were made from these reversed negatives. As an example tight-junctional features of an olfactory supporting cell in a region where this cell conjoined with two other cells are presented (Fig. 1).

A Free Energy Perturbation Approach to Estimate the Intrinsic Solubilities of Drug-like Small Molecules

2019 ◽  
Author(s):  
Sayan Mondal ◽  
Gary Tresadern ◽  
Jeremy Greenwood ◽  
Byungchan Kim ◽  
Joe Kaus ◽  
...  
Keyword(s):  
Solid State ◽  
Small Molecules ◽  
Three Dimensional ◽  
Aqueous Solubility ◽  
Computational Approach ◽  
Free Energy Perturbation ◽  
Perturbation Approach ◽  
Energy Perturbation ◽  
State Form ◽  
Good Agreement

<p>Optimizing the solubility of small molecules is important in a wide variety of contexts, including in drug discovery where the optimization of aqueous solubility is often crucial to achieve oral bioavailability. In such a context, solubility optimization cannot be successfully pursued by indiscriminate increases in polarity, which would likely reduce permeability and potency. Moreover, increasing polarity may not even improve solubility itself in many cases, if it stabilizes the solid-state form. Here we present a novel physics-based approach to predict the solubility of small molecules, that takes into account three-dimensional solid-state characteristics in addition to polarity. The calculated solubilities are in good agreement with experimental solubilities taken both from the literature as well as from several active pharmaceutical discovery projects. This computational approach enables strategies to optimize solubility by disrupting the three-dimensional solid-state packing of novel chemical matter, illustrated here for an active medicinal chemistry campaign.</p>

scholarly journals Simulation of Thermal and Electric Field Distribution in Packaged Sausages Heated in a Stationary Versus a Rotating Microwave Oven

Foods ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1622
Author(s):  
Wipawee Tepnatim ◽  
Witchuda Daud ◽  
Pitiya Kamonpatana
Keyword(s):  
Temperature Distribution ◽  
Electric Field ◽  
Three Dimensional ◽  
Development Stage ◽  
Microwave Oven ◽  
Computational Time ◽  
Plastic Package ◽  
Heating Uniformity ◽  
The Cost ◽  
Good Agreement

The microwave oven has become a standard appliance to reheat or cook meals in households and convenience stores. However, the main problem of microwave heating is the non-uniform temperature distribution, which may affect food quality and health safety. A three-dimensional mathematical model was developed to simulate the temperature distribution of four ready-to-eat sausages in a plastic package in a stationary versus a rotating microwave oven, and the model was validated experimentally. COMSOL software was applied to predict sausage temperatures at different orientations for the stationary microwave model, whereas COMSOL and COMSOL in combination with MATLAB software were used for a rotating microwave model. A sausage orientation at 135° with the waveguide was similar to that using the rotating microwave model regarding uniform thermal and electric field distributions. Both rotating models provided good agreement between the predicted and actual values and had greater precision than the stationary model. In addition, the computational time using COMSOL in combination with MATLAB was reduced by 60% compared to COMSOL alone. Consequently, the models could assist food producers and associations in designing packaging materials to prevent leakage of the packaging compound, developing new products and applications to improve product heating uniformity, and reducing the cost and time of the research and development stage.

Sign in / Sign up

Export Citation Format

Share Document