HPC Subjected to High Temperature: A Study on Intrinsic and Mechanical Damage

2014 ◽  
Vol 629-630 ◽  
pp. 239-244 ◽  
Author(s):  
Chiara Rossino ◽  
Francesco Lo Monte ◽  
Stefano Cangiano ◽  
Roberto Felicetti ◽  
Pietro G. Gambarova
Keyword(s):  
High Temperature ◽  
High Performance ◽  
High Performance Concrete ◽  
Fiber Type ◽  
Heat Exposure ◽  
Mechanical Damage ◽  
Strain Curve ◽  
Before And After ◽  
Concrete Mechanical Properties ◽  
The Relationship

Heat-exposed High-Performance Concrete (HPC) has been the subject of relatively few studies focused on the relationship between the chemo-physical processes occurring in concrete constituents (microscopic level) and concrete mechanical properties (macroscopic level). In order to investigate the correlation between the intrinsic damage and the mechanical damage induced by heat exposure, eleven concrete mixes have been investigated, differing for: compressive strength (fcm,cube ≥ 45, 70, 95 MPa), aggregate type, fiber type (polymeric and metallic) and fiber content. The microstructural and mechanical characterization was carried out on concrete specimens before and after being exposed to 105, 250, 500 and 750°C. The results show that using different experimental techniques at the microstructural level allows to monitor the development of microcracks, whose size is similar to that of macropores. This behavior at the nano, micro-level is reflected by the post-peak branch of the stress-strain curve at the macro-level. This extensive investigation allows to understand concrete mechanical decay due to heating on the basis of microstructural observations, paving the way to mix optimization for high temperature and fire.

scholarly journals Comparative Study of High-Performance Concrete Characteristics and Loading Test of Pretensioned Experimental Beams

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 427
Author(s):  
Pavlina Mateckova ◽  
Vlastimil Bilek ◽  
Oldrich Sucharda
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
High Performance Concrete ◽  
Raw Materials ◽  
Load Capacity ◽  
Materials Testing ◽  
Loading Test ◽  
Conventional Concrete ◽  
Concrete Mechanical Properties ◽  
Normal Strength

High-performance concrete (HPC) is subjected to wide attention in current research. Many research tasks are focused on laboratory testing of concrete mechanical properties with specific raw materials, where a mixture is prepared in a relatively small amount in ideal conditions. The wider utilization of HPC is connected, among other things, with its utilization in the construction industry. The paper presents two variants of HPC which were developed by modification of ordinary concrete used by a precast company for pretensioned bridge beams. The presented variants were produced in industrial conditions using common raw materials. Testing and comparison of basic mechanical properties are complemented with specialized tests of the resistance to chloride penetration. Tentative expenses for normal strength concrete (NSC) and HPC are compared. The research program was accomplished with a loading test of model experimental pretensioned beams with a length of 7 m made of ordinarily used concrete and one variant of HPC. The aim of the loading test was to determine the load–deformation diagrams and verify the design code load capacity calculation method. Overall, the article summarizes the possible benefits of using HPC compared to conventional concrete.

Green High Performance Concrete Based on Sustainable Development

2014 ◽  
Vol 584-586 ◽  
pp. 1568-1572
Author(s):  
Ping Zhang ◽  
Ying Cao
Keyword(s):  
Sustainable Development ◽  
High Performance ◽  
High Performance Concrete ◽  
Construction Materials ◽  
Living Environment ◽  
The Sustainable Development ◽  
Green Concrete ◽  
Concrete Production ◽  
Concrete Materials ◽  
The Relationship

Green high performance concrete is concrete materials which can reduce the load of the earth's environment, coordinate development with the ecosystem and create comfortable living environment. The relationship between the construction materials and the sustainable development and the characteristic of green high performance concrete were introduced, the measures of green concrete production was analyzed and the work essential for the development of green high performance concrete was proposed in this paper. The research shows that the development of green high performance concrete is the inevitable way for the sustainable development of concrete.

Flexural Behavior of Prestressed UHPC Beams

2011 ◽  
Vol 243-249 ◽  
pp. 1145-1155
Author(s):  
Jian Yang ◽  
Zhi Fang ◽  
Gong Lian Dai
Keyword(s):  
High Performance ◽  
High Performance Concrete ◽  
Strain Curve ◽  
Flexural Behavior ◽  
Experimental Program ◽  
Ultra High Performance Concrete ◽  
Stress Strain ◽  
Flexural Response ◽  
Strain Relationship ◽  
Relationship Of

Ultra High Performance Concrete (UHPC), which has very special properties that are remarkably different to the properties of normal and high performance concrete, is being increasingly used for the construction of structure. In this paper, an experimental program was formulated to investigate the characteristics of complete stress-strain curve of UHPC in uniaxial compression and flexural behaviors of prestressed UHPC beams. The particular focus was the influence of the partial prestress ratio and jacking stress on the flexural response of UHPC beams. The results show that UHPC is of good deformability, and a general form of the serpentine curve is proposed to represent the complete stress-strain relationship of UHPC in compression. The tests of beams demonstrated that the UHPC beams have an excellent behavior in load carrying capacity, crack distribution and deformability, their ultimate deflection can reach 1/34～1/70 of the span. Based on this investigation, theoretical correlations for the prediction structure response of UHPC beam are proposed.

Material Properties of Ultra - High Performance Concrete in Extreme Conditions

2016 ◽  
Vol 711 ◽  
pp. 157-162 ◽  
Author(s):  
David Citek ◽  
Milan Rydval ◽  
Stanislav Rehacek ◽  
Jiří Kolísko
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Material Properties ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Accurate Information ◽  
Extreme Conditions ◽  
Ultra High Performance Concrete ◽  
Freeze Thaw

The Ultra High Performance Concrete (UHPC) is a very promising material suitable for application in special structures. However, the knowledge of performance of this relatively new material is rather limited. The exceptional mechanical properties of UHPC allow for a modification of the design rules, which are applicable in ordinary or high strength concrete. This paper deals in more detail with impact of thermal stress on bond properties between prestressing strands and UHPC and an influence of high temperature to final material properties of different UHPC mixtures. Specimens in the first experimental part were subjected to the cycling freeze-thaw testing. The relationship between bond behavior of both type of material (UHPC and ordinary concrete) and effect of cycling freeze-thaw tests was investigated. The second part of experimental work was focused on mechanical properties of UHPC exposure to the high temperature (Tmax = 200°C to Tmax = 1000°C). Tested mechanical properties were compressive and flexural strengths, the fracture properties will be presented in the next paper. The obtained experimental data serve as a basis for further systematic experimental verification and more accurate information about the significantly higher material properties of UHP(FR)C and its behavior in extreme conditions.

Contribution of Reinforcing Fiber Types on the Mechanical Properties of High Performance Concrete Subjected to High Temperature

2013 ◽  
Vol 368-370 ◽  
pp. 1052-1055
Author(s):  
Seung Jo Lee ◽  
Jung Min Park
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
High Temperature ◽  
Weight Reduction ◽  
High Performance ◽  
High Performance Concrete ◽  
Reduction Ratio ◽  
Fiber Types ◽  
Residual Compressive Strength ◽  
Reinforcing Fiber

The aim of the study is to improve the understanding of the influence of reinforcing fiber types on the mechanical properties of high performance concretes (HPC) subjected to high temperature. The mechanical properties measured include residual compressive strength, weight reduction ratio, outward appearance property, and failure mode. Nylon, polypropylene, and steel fiber were added to enhance mechanical property of the concretes. After exposure to high temperatures ranged from 100 to 800°C, mechanical properties of fiber-toughened HPC were investigated. For HPC, although residual compressive strength was decreased by exposure to high temperature over 500°C, weight reduction ratio was significantly higher than that before heating temperature.

Modeling of Vapor Pressure Build-Up in Heated High-Performance Concrete

2012 ◽  
Vol 204-208 ◽  
pp. 3691-3694
Author(s):  
Jie Zhao ◽  
Jian Jun Zheng ◽  
Gai Fei Peng
Keyword(s):  
High Temperature ◽  
Vapor Pressure ◽  
Prediction Model ◽  
High Performance ◽  
High Performance Concrete ◽  
Dominant Role ◽  
Concrete Structures ◽  
Mechanism Study ◽  
Material Degradation ◽  
Temperature Conditions

Under high temperature conditions, such as fire, high-performance concrete will undergo material degradation or even spalling. Spalling is the most detrimental to concrete structures. To prevent concrete from spalling, the mechanism should be understood. Since the build-up vapor pressure in concrete is supposed to play a dominant role in spalling, a vapor pressure prediction model is proposed in this paper to quantitatively analyze the vapor pressure, which can be used for the spalling mechanism study.

The Influence on High-Temperature Mechanical Properties of Hybrid-Fiber-Reinforced High-Performance Concrete and Microscopic Analysis

2012 ◽  
Vol 226-228 ◽  
pp. 1709-1713
Author(s):  
Lan Yan ◽  
Y.M. Xing ◽  
Ji Jun Li
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Transition Zone ◽  
High Performance ◽  
Room Temperature ◽  
Steel Fiber ◽  
High Performance Concrete ◽  
Interfacial Transition Zone ◽  
Hybrid Fiber ◽  
High Temperature Mechanical Properties

This paper investigated the high temperature mechanical properties of the hybrid fiber reinforced high performance concrete (HFHPC) and normal concrete (NC) .After being subjected to different elevated heating temperatures, two kinds of concretes have been tested for the compressive strength, splitting tensile strength and flexural strength of test specimen at room temperature and 200 °C,400 °C,600 °C,800 °C.Microstructure changes of concrete were also observed by using Scanning Electron Microscopy (SEM) after high temperature. The results show that the hybrid fiber can significantly increase mechanical properties of the concrete at room temperature and high temperature. SEM and XRD analysis shows that there is a permeable diffusion layer in the steel fiber surface because of solid state reaction in the Interfacial Transition Zone of steel fiber and concrete. This permeable diffusion layer is white, bright, serrated and mainly consist of FeSi2 and the complex hydrated calcium silicate. The compounds of this layer change the Interfacial Transition Zone structure, enhance bonding capacity of the steel fiber and matrix, and increase the high temperature mechanical properties of concrete.

Sign in / Sign up

Export Citation Format

Share Document