Fracture Model of ZrO2-Al2O3 Ceramic Composite

2016 ◽  
Vol 723 ◽  
pp. 89-93
Author(s):  
Xiao Li Tian ◽  
Chong Bo Xue
Keyword(s):  
Intergranular Fracture ◽  
Ceramic Composite ◽  
Sol Gel ◽  
Secondary Phase ◽  
Fracture Model ◽  
Transgranular Fracture ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sol Gel Process ◽  
The Matrix

Mixtures of ZrO2-Al2O3 ceramic composite were prepared using zirconia powder, ZrO2-Al2O3 composite powder synthesized by sol-gel process as main starting materials and zirconia gel as a binder. Then the mixtures were pressed into the mold, and then sintered at 1650°C for 3h. Finally, the ZrO2-Al2O3 ceramic composite samples were prepared. Then the mineral phases of ZrO2-Al2O3 ceramic composite were analyzed by X-ray diffraction (XRD), and the fracture model of ZrO2-Al2O3 ceramic composite was analyzed by press, scanning electron microscopy (SEM) and energy dispersive X-ray Spectroscope (EDS). The results show that, zirconia is the main phase and alumina is the secondary phase mainly present in the matrix. The fracture model of ZrO2-Al2O3 material was jointly composed by intergranular fracture and transgranular fracture, of which the coarse particle shows the intergranular fracture model and the fine particle shows the transgranular fracture model.

Barium Titanate Ceramic/Ceramic 0–3 Composites for Ultrasonic Transducer Applications

1999 ◽  
Vol 574 ◽  
Author(s):  
M. C. Cheung ◽  
H. L. W. Chan ◽  
Q. F. Zhou ◽  
C. L. Choy
Keyword(s):  
Barium Titanate ◽  
Ceramic Composite ◽  
Ultrasonic Transducer ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Barium Titanate Ceramic ◽  
Sol Gel Process ◽  
Titanate Ceramic

AbstractBarium titanate (BaTiO3) 0–3 ceramic/ceramic composite thick films (∼16μm) for ultrasonic transducer applications were fabricated by a modified sol-gel process. Nano-sized BaTiO3 powder was dispersed in a sol-gel matrix of BaTiO3 to form a 0–3 composite solution. Films were prepared by spin coating and then annealed at various temperatures. The crystallization of the composite film was studied by X-ray diffraction. The dielectric permittivity and the ferroelectric properties of the film were also measured.

Luminescent Properties of Zn2SiO4:Eu3+,Dy3+ Phosphors via Sol-Gel Process

2012 ◽  
Vol 217-219 ◽  
pp. 733-736
Author(s):  
Xiu Mei Han ◽  
Shu Ai Hao ◽  
Ying Ling Wang ◽  
Gui Fang Sun ◽  
Xi Wei Qi
Keyword(s):  
Thermal Analysis ◽  
Ir Spectra ◽  
Sol Gel ◽  
Luminescent Properties ◽  
Photoluminescence Spectra ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sol Gel Process ◽  
Ft Ir

Zn2SiO4:Eu3+, Dy3+ phosphors have been prepared through the sol-gel process. X-ray diffraction (XRD), thermogravimetric and ddifferential thermal analysis (TG-DTA), FT-IR spectra and photoluminescence spectra were used to characterize the resulting phosphors. The results of XRD indicated that the phosphors crystallized completely at 1000oC. In Zn2SiO4:Eu3+,Dy3+ phosphors, the Eu3+ and Dy3+ show their characteristic red(613nm, 5D0-7F2), blue (481nm, 4F9/2–6H15/2) and yellow (577nm, 4F9/2–6H13/2) emissions.

Magnetic Properties of Bulk Zn0.95-XMnXFe0.05O2 Prepared by Sol-Gel Method and Subsequent Hot Pressing

2011 ◽  
Vol 268-270 ◽  
pp. 356-359 ◽  
Author(s):  
Wen Song Lin ◽  
C. H. Wen ◽  
Liang He
Keyword(s):  
Magnetic Properties ◽  
Photoelectron Spectroscopy ◽  
Raw Materials ◽  
Sol Gel ◽  
Secondary Phase ◽  
X Ray Diffraction ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Doped Zno

Mn, Fe doped ZnO powders (Zn0.95-xMnxFe0.05O2, x≤0.05) were synthesized by an ameliorated sol-gel method, using Zn(CH3COO)2, Mn(CH3COO)2and FeCl2as the raw materials, with the addition of vitamin C as a kind of chemical reducer. The resulting powder was subsequently compacted under pressure of 10 MPa at the temperature of 873K in vacuum. The crystal structure and magnetic properties of Zn0.95-xMnxFe0.05O2powder and bulk samples have been investigated by X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). X-ray photoelectron spectroscopy (XPS) was used to study chemical valence of manganese, iron and zinc in the samples. The x-ray diffraction (XRD) results showed that Zn0.95-xMnxFe0.05O (x≤0.05) samples were single phase with the ZnO-like wurtzite structure. No secondary phase was found in the XRD spectrum. X-ray photoelectron spectroscopy (XPS) showed that Fe and Mn existed in Zn0.95-xMnxFe0.05O2samples in Fe2+and Mn2+states. The results of VSM experiment proved the room temperature ferromagnetic properties (RTFP) of Mn, Fe co-doped ZnO samples.

Sol-Gel derived Bi4-xNdxTi3O12 Thin Films and Their Characterization

2002 ◽  
Vol 737 ◽  
Author(s):  
R.E. Melgarejo ◽  
M.S. Tomar ◽  
A. Hidalgo ◽  
R.S. Katiyar
Keyword(s):  
Thin Films ◽  
Spin Coating ◽  
Bismuth Titanate ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Complete Solid Solution ◽  
Sol Gel Process ◽  
Ferroelectric Memory ◽  
Initial Results

ABSTRACTNd substituted bismuth titanate Bi4-xNdxTi3O12 were synthesized by sol-gel process and thin films were deposited on Pt substrate (Pt/TiO2/SiO2/Si) by spin coating. Thin films, characterized by X-ray diffraction and Raman spectroscopy, shows complete solid solution up to the composition x < 1. Initial results indicate that the ferroelectric polarization increases with increasing Nd content in the film with 2Pr = 50μC/cm2 for x = 0.46, which may have application in non-volatile ferroelectric memory devices.

Synthesis and Characterizations of Strontium Substituted Hydroxyapatite Thin Films

2010 ◽  
Vol 93-94 ◽  
pp. 231-234
Author(s):  
B. Hongthong ◽  
Satreerat K. Hodak ◽  
Sukkaneste Tungasmita
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Chemical Composition ◽  
Spin Coating ◽  
Phase Structure ◽  
Sol Gel ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sol Gel Process

Strontium substituted hydroxyapatite(SrHAp) were fabricated both in the form of powder as reference and thin film by using inorganic precursor reaction. The sol-gel process has been used for the deposition of SrHAp layer on stainless steal 316L substrate by spin coating technique, after that the films were annealed in air at various temperatures. The chemical composition of SrHAp is represented (SrxCa1-x)5(PO4)3OH, where x is equal to 0, 0.5 and 1.0. Investigations of the phase structure of SrHAp were carried out by using X-ray diffraction technique (XRD). The results showed that strontium is incorporated into hydroxyapatite where its substitution for calcium increases in the lattice parameters, and Sr3(PO4)2 can be detected at 900°C. The SEM micrographs showed that SrHAp films exhibited porous structure before develop to a cross-linking structure.

Low-Temperature Synthesis of Nano-Crystalline ZnTiO3 Powders by Aqueous Sol-Gel Process

2014 ◽  
Vol 543-547 ◽  
pp. 3741-3744
Author(s):  
Quan Jing Mei ◽  
Cong Ying Li ◽  
Jing Dong Guo ◽  
Gui Wang ◽  
Hai Tao Wu
Keyword(s):  
Sol Gel ◽  
Zinc Nitrate ◽  
X Ray Diffraction ◽  
Low Temperature Synthesis ◽  
Temperature Synthesis ◽  
Calcination Process ◽  
X Ray ◽  
Nano Crystalline ◽  
Transmission Electron ◽  
Sol Gel Process

The ecandrewsite-type ZnTiO3was successfully synthesized by the aqueous sol-gel method using TiO2dioxide and zinc nitrate as starting materials instead of expensive organic solvent and metal alkoxides. The as-prepared nanopowders were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA) and transmission electron microscopy (TEM), respectively. The results showed that the calcination process of gel consisted of a series of oxidation and combustion reactions, accompanied by significantly exothermal effects. Highly reactive nanosized ZnTiO3powders were successfully obtained at 850 °C with particle size ~50 nm. By comparison, the aqueous sol-gel process was the most effective and least expensive technique used for the preparation of ZnTiO3nanopowders.

Preparation of YBCO Superconducting Films by Sol-Gel Process

2007 ◽  
Vol 546-549 ◽  
pp. 2007-2010
Author(s):  
Gao Yang Zhao ◽  
Huang Li Zhang ◽  
Ren Zhong Xue ◽  
Yuan Qing Chen ◽  
Li Lei
Keyword(s):  
Sol Gel ◽  
Precursor Solution ◽  
Superconducting Films ◽  
Superconducting Transition ◽  
X Ray Diffraction ◽  
Organic Salts ◽  
Ybco Films ◽  
X Ray ◽  
Sol Gel Process ◽  
Ybco Superconducting Films

precursor solution was prepared using barium trifluoroacetae (Ba-TFA) and non-fluorine yttrium (Y) and copper (Cu) organic salts. The precursor solution was modified by benzalacetone (BzAcH), in which the Cu2+ were chelated with BzAcH, which preventing the loss of Cu in the pyrolysis process. Dense YBCO superconducting films with smooth surface, which confirmed by scanning electron microscopy (SEM), were repeatedly obtained through sol-gel process. X-ray diffraction (XRD) 2θ scanning and φ scanning indicated that the as-prepared YBCO films had good c-axis texture. YBCO films with superconducting transition temperature (TC) above 89K were obtained.

Study on the Synthesis of Nano-Crystalline Mg2SiO4 Powders by Aqueous Sol-Gel Process

2013 ◽  
Vol 538 ◽  
pp. 142-145 ◽  
Author(s):  
X.F. Chen ◽  
J. Li ◽  
T.T. Feng ◽  
Y.S. Jiang ◽  
X.H. Zhang ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Sol Gel ◽  
Magnesium Nitrate ◽  
Metal Alkoxides ◽  
X Ray Diffraction ◽  
Calcination Process ◽  
X Ray ◽  
Nano Crystalline ◽  
Sol Gel Process ◽  
Scanning Electron

The forsterite-structure Mg2SiO4 was successfully synthesized by the aqueous sol-gel method using Si sols dioxide and magnesium nitrate as starting materials instead of expensive organic solvent and metal alkoxides. The as-prepared nanopowders were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA) and scanning electron microscope (SEM), respectively. The results showed that the calcination process of gel consisted of a series of oxidation and combustion reactions, accompanied by significantly exothermal effects. Highly reactive nanosized Mg2SiO4 powders were successfully obtained at 850 °C with particle size of 60~80 nm.

Bicontinuous nanodisc and nanospherical titania materials prepared by sol-gel process in reverse microemulsion

2012 ◽  
Vol 66 (3) ◽  
Author(s):  
Khaled Haouemi ◽  
Fathi Touati ◽  
Néji Gharbi
Keyword(s):  
Sol Gel ◽  
Textural Properties ◽  
Rutile Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Tio2 Particles ◽  
Sol Gel Process ◽  
Bet Method ◽  
Reverse Microemulsions ◽  
Different Shapes

AbstractTiO2 nanoparticles with different shapes and sizes were synthesised by the sol-gel route in Water/Brij78/Hexane reverse microemulsions. The aqueous cores of these microemulsions were used as nanoreactors to control sol-gel reactions. We studied the effect of water/surfactant mole ratio (W 0) on the morphology, and textural properties of the final products. The materials thus obtained were characterised by different techniques. Thermogravimetric and differential thermal analysis (TG-DTA) was used to study the thermal behaviour of the products and X-ray diffraction (XRD) to identify the crystalline phases. The morphological and textural properties of the products were determined by scattering electron microscopy (SEM) and the Brunauer-Emmett-Teller (BET) method, respectively. We also studied the influence of thermal treatment on the structure and size of the TiO2 particles. The effect of W 0 on the anatase-rutile phase transition temperature was investigated.

Facile Synthesis of Cu2SnSe3 Thin Film via Sol-Gel Process

2014 ◽  
Vol 1004-1005 ◽  
pp. 774-777 ◽  
Author(s):  
Ji Wan Liu ◽  
Gui Lin Chen ◽  
Wei Feng Liu ◽  
Guo Shun Jiang ◽  
Chang Fei Zhu
Keyword(s):  
Low Cost ◽  
Sol Gel ◽  
Soda Lime ◽  
Soda Lime Glass ◽  
X Ray Diffraction ◽  
X Ray ◽  
Absorbance Spectroscopy ◽  
Sol Gel Process ◽  
Ar Gas ◽  
Pure Cu

A low-cost non-vacuum process for fabrication of Cu2SnSe3 film by sol-gel method and knife-coating process is described. First, a certain amount of Copper (I) chloride and tin (IV) tetrachloride was dissolve into the mixture of water and alcohol and then some Polyvinyl Pyrrolidone (PVP) was added to the solution to obtain based colloidal solution. Next, precursor thin layer was deposited by knife-blading technique on soda-lime glass (SLG). Finally, precursor layer was annealed at selenium flow atmosphere carried by Ar gas at 550oC. Through X-ray diffraction (XRD) and Raman spectra, it is found that pure Cu2SnSe3 film was prepared successfully. Scanning electron microscopy (SEM) and UV–vis–NIR absorbance spectroscopy were used to characterize its morphology and optical bandgap.

Sign in / Sign up

Export Citation Format

Share Document