Assessment of Asphalt Mixture Behaviour Containing Recycled Concrete Aggregates

2021 ◽  
Vol 895 ◽  
pp. 139-146
Author(s):  
Sarah Safaaldeen Musa ◽  
Noorance Al-Mukaram ◽  
Mohammed Bally Mahdi

Recently, the construction industry uses the Recycled Concrete Aggregates (RCA)resulting from construction and demolition waste (CDW) to achieve sustainable requirements andeconomic benefits. In this paper, asphalt paving mixes were prepared with RCA instead of naturalaggregates for the base course in flexible road pavements and walking areas used by pedestrians andcyclists. Different asphalt mixes samples were prepared with different asphalt contents to meet therequired specifications. Additionally, several laboratory tests were carried out to assess mixturebehavior including the Marshall test. The results indicated that the mixture made with aggregates ofCDW have met all the requirements of Iraqi specifications of roads and bridges (SORB/R9). Thisinvestigation could be a useful guide for road engineers in designing asphalt mixtures from RCA.

Crystals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 695
Author(s):  
Natt Makul ◽  
Roman Fediuk ◽  
Mugahed Amran ◽  
Abdullah M. Zeyad ◽  
Sergey Klyuev ◽  
...  

Currently, a number of disadvantages hampers the use of recycled concrete aggregates (RCA). The current review proves that concretes made with complete replacement of natural aggregate with RCA allow the production of high-quality concrete. One of the possibilities for improving concrete properties with RCA is the use of extended curing and pozzolanic materials with varying cement ratios. The potential use of RCA concretes is in the production of high-value materials that increase environmental and financial benefits. RCA have strong potential in the development of a new generation of concrete and stimulate economic activity in many countries in addition to optimizing natural resources. Economic benefits include minimal travel costs; cheaper sources of concrete than newly mined aggregates; reduction of the landfill area required for the placement of concrete waste; the use of RCA minimizes the need for gravel extraction, etc. The proposed strategy could be to sequentially separate demolition waste such as roof finishes, waterproof materials, interior and exterior materials, etc. Closing life cycles is the main approach used for efficient structures for the recycling and reuse of construction and demolition waste in the production and recovery of materials, especially when recycling and reusing materials. In the life cycle, the recycling of recovered materials allows them to be used for new construction purposes, avoiding the use of natural concrete aggregates. Government, design institutes, construction departments and project managers should be involved in the creation and use of RCA. In demolition and construction, the main players are the project owners. Their obligations, expectations and responsibilities must be properly aligned. For the past 20 years, recycled concrete aggregate from demolition and construction waste has been considered as an alternative to pure concrete in structural concrete to minimize the environmental impact of construction waste and demolition waste and the conversion of natural aggregate resources. It is now recognized that the use of RCA for the generations of concrete is a promising and very attractive technology for reducing the environmental impact of the construction sector and conserving natural resources. In the market, the selling price is not an obstacle for market applications of RCA, as there are scenarios in which their cost is lower than the cost of products made from conventional building materials. This is more of an acceptance factor in the market for recycled concrete aggregates. In this sector, the lack of identification, accreditation and uniform quality certification systems and their narrow application cause some marketing problems. With proper RCA preparation, concrete with standard physical and mechanical properties and performance characteristics can be obtained.


2021 ◽  
Vol 03 (03) ◽  
pp. 1-1
Author(s):  
Athanasia Soultana ◽  
Michael Galetakis ◽  
Anthoula Vasiliou ◽  
Konstantinos Komnitsas ◽  
Despina Vamvuka

Waste concrete is the most predominant constituent material among construction and demolition waste. Current waste concrete recycling is limited to the use of recycled concrete aggregates as a road-base material and less as aggregates in new concrete mixes. Further, the production of recycled concrete aggregates results in the generation of a high amount of fines, consisting mainly of cement paste particles. Hence, this study aims to produce the cement mortars using the upgraded recycled concrete aggregates (sand granulometry) for the total replacement of natural aggregates and recycled concrete fines activated through a thermal treatment method as a partial cement substitution material. Cement mortar specimens were tested for their compressive and flexural strength, density and water absorption performance. The results showed that the combined usage of upgraded recycled concrete sand for total replacement of primary crushed sand and recycled concrete fines as partial cement replacement material is a promising option to produce cement mortars.


2019 ◽  
Vol 11 (13) ◽  
pp. 3730 ◽  
Author(s):  
Juan J. Galan ◽  
Luís M. Silva ◽  
Ignacio Pérez ◽  
Ana R. Pasandín

The present work is a re-evaluation of previous research on the durability of hot-mix asphalt made with recycled concrete aggregates from construction and demolition waste (CDW) with a different approach. Response surface methodology (RSM) was used to conduct this study. The kind of natural aggregates (schist and calcite-dolomite), the recycled concrete aggregates percentage (0%, 20%, 40% and 60%) and the water saturation (0% and 100%) were the pertinent factors for this methodology. Indirect tensile stress (ITS) was determined in mixtures fabricated with 0%, 20%, 40% and 60% recycled concrete aggregates. According to the results, the ITS of the bituminous mixtures increases as the percentage of recycled concrete aggregate increases. This behavior is more significant when calcite-dolomite is used as a natural aggregate. Water saturation has the same influence in both natural aggregates. The indirect tensile strength ratio (ITSR) was calculated to evaluate the stripping potential. According to the Spanish specifications, the results suggest that the percentage of CDW that can be used for hot mixes is 17% when schist is used as natural aggregate and 14% for calcite-dolomite.


2020 ◽  
Vol 12 (20) ◽  
pp. 8551
Author(s):  
Juan J. Galan ◽  
Luís M. Silva ◽  
Ana R. Pasandín ◽  
Ignacio Pérez

This paper reports the influence of the percentage of recycled aggregate (RCA) from construction and demolition waste (C&DW) together with the percentage of binder (L), curing time (t) and temperature (T) of the samples on the stiffness of a hot asphalt mixture. The study was carried out using the response surface methodology (RSM). The resilient modulus was chosen to estimate the stiffness of the mixture. The percentages of RCA studied were 0% (control), 5%, 10%, 20% and 30%, whilst 3.5%, 4% and 4.5% were those chosen for the binder content. Before compacting the samples, they were left into the oven to cure. Curing time, or pretreatment time, were set at 0 (control), 2 and 4 h. The samples were subjected to temperatures of 0, 10 and 20 °C. The natural aggregate is of the hornfels type. All the specimens studied showed high stiffness at low temperatures. According to this research, temperature proved to be the most influential factor on the decrease in the resilient modulus and, conversely, the percentage of recycled aggregate is not a significant factor in the range of values studied.


2013 ◽  
Vol 849 ◽  
pp. 81-87
Author(s):  
Ana M. Rodríguez Pasandín ◽  
Ignacio Pérez Pérez Pérez ◽  
Breixo Gómez Meijide

In this research a laboratory characterization of hot-mix asphalt (HMA) made with recycled concrete aggregates (RCA) from construction and demolition waste (CDW) as base layer in road construction has been conducted. HMA containing 5%, 10%, 20% and 30% of RCA in place of virgin aggregate were evaluated. To improve water resistance of the mixtures, they were left in an oven for 4 hours at mixing temperature before compaction to allow the bitumen absorption and, in addition, obstructing the mortar pores, strengthening the attached mortar onto the RCA surface and thus, preventing water pathways. The tested mixtures complied with Spanish water resistance requirement and also showed a water resistance performance much higher than that of the mixtures that were not cured in the oven. Stiffness and resistance to permanent deformation were also studied showing satisfactory results.


2018 ◽  
Vol 68 (332) ◽  
pp. 168 ◽  
Author(s):  
P. Saiz-Martínez ◽  
D. Ferrández-Vega ◽  
C. Morón-Fernández ◽  
A. Payán de Tejada-Alonso

Construction and demolition waste can be used as a substitution of natural aggregate in mortar and concrete elaboration. A poorer quality of recycled aggregates generally has negative impact on mortar properties. Shrinkage is one of the properties that experiences worse outcome due to the higher absorption of recycled aggregates. This research evaluates the potential shrinkage of mortars elaborated with recycled concrete aggregates both with and without fibres addition, as well as the relation between moisture loss and shrinkage caused by mortar drying process using a capacitive sensor of the authors’ own design. Two different mortar dosages 1:3 and 1:4 and three fiber types: polypropylene fiber, fiberglass and steel fiber, in different proportions were used. Obtained results show that the use of polypropylene fiber improves the recycled mortars performance against shrinkage in 0.2%. Moreover, a clear relation between dry shrinkage and moisture loss was observed.


RSC Advances ◽  
2015 ◽  
Vol 5 (44) ◽  
pp. 34854-34863 ◽  
Author(s):  
Zhong-Yao Pan ◽  
Gengying Li ◽  
Cheng-Yu Hong ◽  
Hui-Ling Kuang ◽  
Yu Yu ◽  
...  

Recycled concrete aggregate (RCA) was pretreated by microbial calcite precipitation. The surface treatment reduced the porosity and permeability of RCA by 32% and 86.5%, respectively. The treatment improved the bonding strength of RCA–asphalt binder by 55%.


2017 ◽  
Vol 902 ◽  
pp. 14-19 ◽  
Author(s):  
Iveta Nováková ◽  
Iveta Hájková

Article presents quality evaluation system for description of recycled concrete aggregates (RCA), verification of RCA properties and subsequent application in to concrete mixtures as a partial or total replacement of natural aggregates (NA). Modernization and rehabilitation of constructions is accompanied by creation of demolition waste from old buildings and structures. The necessity of recycling is unavoidable, because volume of construction and demolition waste (C&DW) is increasing and the landfills are reaching their maximum capacity. Nowadays, there are numerous research teams focused on analysis of characteristics and application of RCA into new concrete as a replacement of NA. Test samples of RCA have always different source, grain composition and other physical and mechanical properties, which are variously described in each different paper. Up to now, there is no any uniform quality evaluation system for description of recycled concrete aggregates, which can easily describe their source and assumed properties. Our aim is to set up rules for description of RCA and simplify the evaluation of properties of various RCA. Qualification system will be applied on three different samples of RCA and verified by the selected properties tests. Tested samples of RCA will be than used as a replacement of natural aggregates in concrete mixtures. The replacement amount was set up on 20%, 40% and 100% according to the reviewed literature, to have a comparable replacement amount and valuable results for discussion. The results of RCA testing and testing of concrete with partial and total replacement of NA showed that the evaluation system is working properly. It can be concluded, that accuracy of the quality evaluation system for description of recycled concrete aggregates is sufficient, but more tests on RCA should be done to prove all connections in between description of RCA and their properties.


Author(s):  
Cinthia Maia Pederneiras

The construction industry is considered the biggest waste producer in Europe. In order to encourage recycling, European Parliament decreed through the Waste Framework Directive 2008/98/EC, that at least 70% of construction and demolition waste should be recycled by 2020. From recycling plants, three types of recycled aggregates are produced. Recycled Concrete Aggregate, mainly from cementitious waste, as such as concrete and mortars residues; Recycled Masonry Aggregates mainly composed by recycled ceramic materials, as such as tiles and bricks residues; Mixed Recycled Aggregates based on rubble residues, from heterogenous materials waste. This research evaluated the technical feasibility of rendering mortars with Recycled Concrete Aggregates and Mixed Recycled Aggregates, in different volume incorporation of 0%, 20%, 50% and 100%. The experimental programme comprised an analyse of the fresh and hardened properties, regarding the water and mechanical behaviour of the mortars. From the results, it was noticed that the modified mortars presented a reduction in the modulus of elasticity, which its correlated to a less susceptibility to cracking. Regarding mechanical performance, the modified mortars obtained reduction of the flexural and compressive strength over time. However, it was not a significant harmful criterion. Therefore, the incorporation of recycled aggregates in cementitious materials is considered a technical and sustainable solution.


Buildings ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 167
Author(s):  
Mohammed Seddik Meddah ◽  
Ali Al-Harthy ◽  
Mohamed A. Ismail

Recycled materials are now widely used in various industrial sectors to enhance sustainability and reduce environmental charges. Using recycled aggregates in concrete production significantly lowers demand for natural aggregates and the amount of solid waste sent to landfills. This paper summarizes the main results of a study undertaken to design low and normal strength concrete with various replacement ratios of coarse recycled concrete aggregates (RCA). To persuade the concrete industry to use recycled materials as one of the main components of concrete produced, the overall mechanical and durability performances of the RCA-concrete should be close or even similar to the concrete made with natural ingredients. The present research adopted an approach that consists of designing a series of low and normal strength with RCA having an equal target 28-day design strength to the corresponding natural aggregates concrete but while varying the water–cement ratios (w/c). Coarse recycled concrete aggregates, obtained by crushing waste concrete debris collected from different construction and demolition waste sources, were used in three different proportions of 30%, 50% and 100% (by weight) to produce new concrete with various w/c ratios and different compressive strength grades. Concrete mixes produced with general use Portland cement and various RCA contents were investigated in terms of their key mechanical and durability performances. The mechanical properties (crushing value) of the used RCA were visibly lower than the natural coarse aggregates (NCA). Thus, RCA-concrete showed lower performance than the NCA-concrete. It was found that by using up to 30% coarse RCA, the mechanical properties of concrete were not significantly affected. Beyond 30% of partial replacement of NCA by the coarse RCA, a continuing decrease in the mechanical performance with an increase in RCA amount was found. However, reducing the w/c ratio of concrete designed with the coarse RCA resulted in a compressive strength improvement, a better resistance to sulphate attack, carbonation, and chloride ion penetrations. Additionally, a proper design of Portland cement concrete produced with various proportions of RCA could also contribute to promoting sustainability in the construction industry and lowering its environmental impact.


Sign in / Sign up

Export Citation Format

Share Document