Effect of Temperature on Phase Angle and Dynamic Modulus of Asphalt Mixtures Using SPT

2020 ◽  
Vol 1007 ◽  
pp. 99-104
Author(s):  
Juraidah Ahmad ◽  
Mohd Rosli Hainin ◽  
Ekarizan Shaffie ◽  
Khairil Azman Masri ◽  
Mohd Amin Shaffi
Keyword(s):  
Phase Angle ◽  
Dynamic Modulus ◽  
Performance Test ◽  
Complex Modulus ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Load Resistance ◽  
Asphalt Mixtures ◽  
Effect Of Temperature ◽  
Low Viscosity

The Simple Performance Test (SPT) can be used to characterize the strength and load resistance of asphalt mixtures. The objectives of this study are to determine the effect of temperature on the phase angle and dynamic complex modulus of the asphalt mixtures tested at 30°C, 35°C, 40°C, 45°C and 50°C at 25Hz, 20Hz, 10Hz, 5Hz, 1Hz and 0.5Hz frequencies. The asphalt mixtures of NMAS 12.5mm are prepared using asphalt binder PEN 80/100 and PEN 60/70. The asphalt mixtures are designed using the Superpave system and compacted using the Superpave Gyratory Compactor (SGC). The dynamic modulus test results showed that at a higher temperature, the stiffness of the asphalt mixtures is affected. The dynamic modulus of the mixtures is highest at 30°C and gradually decrease at 35°C, 40°C, 45°C and 50°C respectively. The dynamic modulus values for asphalt mixtures with bitumen grade PEN 60/70 are also higher compared to the asphalt mixtures with bitumen grade PEN 80/100. Results also showed that the low phase angle values indicate low viscosity of the asphalt binder due to increase in temperature. The present study is meaningful in understanding the asphalt mixture behaviour at different temperature and loading frequencies.

Experimental Analysis of Dynamic Modulus and Phase Angle of High Modulus Asphalt Mixture

2011 ◽  
Vol 243-249 ◽  
pp. 4220-4225
Author(s):  
Rui Bo Ren ◽  
Li Tao Geng ◽  
Li Zhi Wang ◽  
Peng Wang
Keyword(s):  
Phase Angle ◽  
Dynamic Modulus ◽  
Asphalt Mixture ◽  
Performance Testing ◽  
Asphalt Mixtures ◽  
Testing System ◽  
High Modulus ◽  
Temperature Performance ◽  
Different Temperatures ◽  
Confining Pressures

To study the mechanical properties of high modulus asphalt mixtures, dynamic modulus and phase angle of these two mixtures are tested with Simple Performance Testing System under different temperatures, loading frequencies and confining pressures. Testing results show the superiority of high modulus asphalt mixture in aspect of high temperature performance. Furthermore, the changing rules of dynamic modulus and phase angle are also discussed.

scholarly journals Predict the Phase Angle Master Curve and Study the Viscoelastic Properties of Warm Mix Crumb Rubber-Modified Asphalt Mixture

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5051
Author(s):  
Fei Zhang ◽  
Lan Wang ◽  
Chao Li ◽  
Yongming Xing
Keyword(s):  
Phase Angle ◽  
Dynamic Modulus ◽  
Master Curve ◽  
Loss Modulus ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Asphalt Mixtures ◽  
Master Curves ◽  
Modified Asphalt ◽  
Sigmoidal Model

To identify the most accurate approach for constructing of the dynamic modulus master curves for warm mix crumb rubber modified asphalt mixtures and assess the feasibility of predicting the phase angle master curves from the dynamic modulus ones. The SM (Sigmoidal model) and GSM (generalized sigmoidal model) were utilized to construct the dynamic modulus master curve, respectively. Subsequently, the master curve of phase angle could be predicted from the master curve of dynamic modulus in term of the K-K (Kramers–Kronig) relations. The results show that both SM and GSM can predict the dynamic modulus very well, except that the GSM shows a slightly higher correlation coefficient than SM. Therefore, it is recommended to construct the dynamic modulus master curve using GSM and obtain the corresponding phase angle master curve in term of the K-K relations. The Black space diagram and Wicket diagram were utilized to verify the predictions were consistent with the LVE (linear viscoelastic) theory. Then the master curve of storage modulus and loss modulus were also obtained. Finally, the creep compliance and relaxation modulus can be used to represent the creep and relaxation properties of warm-mix crumb rubber-modified asphalt mixtures.

scholarly journals Comparative Study on Complex Modulus and Dynamic Modulus of High-Modulus Asphalt Mixture

Coatings ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1502
Author(s):  
Licheng Guo ◽  
Qinsheng Xu ◽  
Guodong Zeng ◽  
Wenjuan Wu ◽  
Min Zhou ◽  
...  
Keyword(s):  
Dynamic Modulus ◽  
Complex Modulus ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Design System ◽  
High Modulus ◽  
Stiffness Modulus ◽  
Two Systems ◽  
Value Range ◽  
Dynamic Modulus Test

In the French high-modulus asphalt mixture design system, the complex modulus of the mixture under the conditions of 15 °C and 10 Hz is taken as the design index. However, in China, the dynamic modulus under the conditions of 15 °C, 10 Hz, 20 °C, 10 Hz and 45 °C, 10 Hz was taken as the stiffness modulus index of high-modulus asphalt mixture. The difference in modulus values between the two systems caused the pavement structure layer to be thicker and the construction cost to be higher in China. In order to find out the appropriate modulus value of high-modulus asphalt mixture suitable for China’s modulus parameter conditions to better carry out the reasonable design and evaluation of high-modulus asphalt mixture in China, the modulus of four types of high-modulus asphalt mixtures under the two systems through the two-point bending complex modulus test of the CRT-2PT trapezoidal beam and the SPT uniaxial compression dynamic modulus test were analyzed in this paper. Under the premise of meeting the stiffness modulus index of the French high-modulus asphalt mixture, the relationship conversion models between the dynamic modulus and complex modulus of high-modulus asphalt mixture under different temperatures were established. According to the conversion models, the design evaluation value range of dynamic modulus suitable for China’s condition was recommended. It is recommended that the dynamic modulus of China’s high-modulus asphalt mixture at 15 °C and 10 Hz is not less than 16,000 MPa, the dynamic modulus at 20 °C and 10 Hz is not less than 14,000 MPa, and the dynamic modulus at 45 °C and 10 Hz is not less than 2500 MPa. Five kinds of high-modulus asphalt mixtures used in actual road engineering were tested to verify the reliability of the recommended dynamic modulus values based on the modulus conversion model, and the results are consistent with the recommended value range of the model.

Study on Dynamic Modulus of Waste Plastic Modified Asphalt Mixture Using Waste Plastic Bag Chips

2011 ◽  
Vol 261-263 ◽  
pp. 824-828 ◽  
Author(s):  
Qian Zhang ◽  
Shu Wei Goh ◽  
Zhan Ping You
Keyword(s):  
Phase Angle ◽  
Dynamic Modulus ◽  
Asphalt Mixture ◽  
Control Sample ◽  
Asphalt Mixtures ◽  
Test Results ◽  
Waste Plastic ◽  
Modified Asphalt ◽  
Plastic Bag ◽  
Dynamic Modulus Test

The objective of this study is to investigate the possibility of using waste plastic as an additive to modify asphalt mixtures thereby reducing the waste plastic stream in our environment. High density polyethylene plastic bags obtained from the retail store were shredded into chips and added into asphalt mixtures at the rate of 0% (control sample), 2, 5 and 8% based on binder weight. Three different temperatures of 4, 21.3 and 39.2°C and frequencies ranging from 0.1 to 25 Hz were used in the dynamic modulus test. It was found that most of the asphalt mixtures modified with waste plastic have higher dynamic modulus when compared with the control samples. However, no significant trend on phase angle was found among all the samples tested based on the test results. In this study, it was found that the modified asphalt mixture with 2% waste plastic had the highest dynamic modulus and phase angle. Based on the test results, it was found that plastic modified asphalt mixture will have a better performance under intermediate and high temperature conditions.

scholarly journals The Effects of Asphalt Migration on the Dynamic Modulus of Asphalt Mixture

2019 ◽  
Vol 9 (13) ◽  
pp. 2747 ◽  
Author(s):  
Hui Wang ◽  
Shihao Zhan ◽  
Guojun Liu
Keyword(s):  
Phase Angle ◽  
Dynamic Modulus ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Testing Temperature ◽  
Asphalt Mixtures ◽  
Loading Frequency ◽  
Stiffness Parameter ◽  
Master Curves ◽  
Asphalt Content

Asphalt migration is one of the significant detrimental effects on asphalt pavement performance. In order to simulate the state after the occurrence of asphalt migration amid asphalt pavement layers and further investigate the effects of asphalt migration on the dynamic modulus of asphalt mixture, samples with different asphalt contents layers were firstly separated into the upper and lower half portions and then compacted together. By conducting the dynamic modulus test with the Superpave Simple Performance Tester (SPT), the variation laws of the dynamic modulus (|E*|) and the phase angle (δ) at different testing temperatures and loading frequencies were analyzed in this paper. Further, the dynamic modulus and the stiffness parameter (|E*|/sinδ) at the loading frequency of 10 Hz and testing temperature of 50 °C were illustrated. Simultaneously, the master curves of the dynamic modulus and phase angle of asphalt mixtures under different testing conditions were constructed to better investigate the effects of asphalt migration on the dynamic modulus by means of Williams–Landel–Ferry (WLF) equation and Sigmoidal function. Results show that, after the asphalt migration, the dynamic modulus of asphalt mixtures increase with the increasing loading frequency while they decrease with the increasing testing temperature; the dynamic modulus and the stiffness parameter are the highest when asphalt mixtures have the optimum asphalt content layers, and then decrease with the incremental difference of asphalt content in the upper and lower half portions. Besides this, different from the master curves of dynamic modulus, the master curves of phase angle firstly increase with the increase of loading frequency to the highest point and then decrease with the further increase of loading frequency and are not as smooth as that of dynamic modulus. It can be concluded that the asphalt migration has compromised the mixture’s mechanical structure, and the more asphalt migrates, the weaker the mechanical properties of asphalt mixture will be. Additionally, based on the shift factors and master curves in the time–temperature superposition principle (TTSP), the effects of asphalt migration on the dynamic modulus and the variation laws of the dynamic modulus of asphalt mixture after the occurrence of asphalt migration can be better construed at the quantitative level.

Master Curves of Dynamic Modulus and Phase Angle for High Modulus Asphalt Mixtures

2011 ◽  
Vol 243-249 ◽  
pp. 4226-4230
Author(s):  
Li Tao Geng ◽  
Rui Bo Ren ◽  
Li Zhi Wang ◽  
Cui Lan Gao
Keyword(s):  
Phase Angle ◽  
Dynamic Modulus ◽  
Superposition Principle ◽  
Asphalt Mixture ◽  
Performance Testing ◽  
Temperature Shift ◽  
Asphalt Mixtures ◽  
Least Square ◽  
High Modulus ◽  
Master Curves

Two types of high modulus asphalt mixtures are introduced. Dynamic modulus and phase angle of these two mixtures are tested with Simple Performance Testing System under different temperatures, loading frequencies and confining pressures. Based on time-temperature superposition principle, dynamic modulus master curves and time-temperature shift factors at reference temperature are obtained using nonlinear square least square regression, and phase angle master curves are constructed utilizing the same time-temperature shift factors. The influence of confining pressure on mechanical properties of high modulus asphalt mixture is discussed.

scholarly journals Cold In-Place Recycling Asphalt Mixtures: Laboratory Performance and Preliminary M-E Design Analysis

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2036
Author(s):  
Dongzhao Jin ◽  
Dongdong Ge ◽  
Siyu Chen ◽  
Tiankai Che ◽  
Hongfu Liu ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Dynamic Modulus ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Emulsion ◽  
Moisture Susceptibility ◽  
Low Temperature Cracking

Cold in-place recycling (CIR) asphalt mixtures are an attractive eco-friendly method for rehabilitating asphalt pavement. However, the on-site CIR asphalt mixture generally has a high air void because of the moisture content during construction, and the moisture susceptibility is vital for estimating the road service life. Therefore, the main purpose of this research is to characterize the effect of moisture on the high-temperature and low-temperature performance of a CIR asphalt mixture to predict CIR pavement distress based on a mechanistic–empirical (M-E) pavement design. Moisture conditioning was simulated by the moisture-induced stress tester (MIST). The moisture susceptibility performance of the CIR asphalt mixture (pre-mist and post-mist) was estimated by a dynamic modulus test and a disk-shaped compact tension (DCT) test. In addition, the standard solvent extraction test was used to obtain the reclaimed asphalt pavement (RAP) and CIR asphalt. Asphalt binder performance, including higher temperature and medium temperature performance, was evaluated by dynamic shear rheometer (DSR) equipment and low-temperature properties were estimated by the asphalt binder cracking device (ABCD). Then the predicted pavement distresses were estimated based on the pavement M-E design method. The experimental results revealed that (1) DCT and dynamic modulus tests are sensitive to moisture conditioning. The dynamic modulus decreased by 13% to 43% at various temperatures and frequencies, and the low-temperature cracking energy decreased by 20%. (2) RAP asphalt incorporated with asphalt emulsion decreased the high-temperature rutting resistance but improved the low-temperature anti-cracking and the fatigue life. The M-E design results showed that the RAP incorporated with asphalt emulsion reduced the international roughness index (IRI) and AC bottom-up fatigue predictions, while increasing the total rutting and AC rutting predictions. The moisture damage in the CIR pavement layer also did not significantly affect the predicted distress with low traffic volume. In summary, the implementation of CIR technology in the project improved low-temperature cracking and fatigue performance in the asphalt pavement. Meanwhile, the moisture damage of the CIR asphalt mixture accelerated high-temperature rutting and low-temperature cracking, but it may be acceptable when used for low-volume roads.

scholarly journals Evaluating the Effect of Plastomer Modified Asphalt Mixture on High/Low Temperature Performance

2021 ◽  
Vol 40 (3) ◽  
pp. 680-691
Author(s):  
Rafi Ullah ◽  
Imran Hafeez ◽  
Waqas Haroon ◽  
Safeer Haider
Keyword(s):  
Low Temperature ◽  
Dynamic Modulus ◽  
Research Study ◽  
Hot Mix Asphalt ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Limestone Aggregate ◽  
Temperature Performance ◽  
Low Temperature Performance

Asphalt pavement’s surfaces deteriorate over time due to combined effect of traffic and surrounding environment. Fatigue and rutting are the major distresses which cause failures in flexible pavements. Different temperature control computer operated equipment’s are being used worldwide to predict the performance of asphalt mixtures at approximately same condition to those in-service pavements. Similarly, different types of polymers such as elastomer and thermoplastic have been used all over the world in Hot Mix Asphalt (HMA) for the improvement of asphalt mixtures. But little attention has been taken to evaluate the effect of plastomer on hot mix asphalt performance. Moreover, the initial cost of elastomer is higher than other types of polymers such as plastomer. The aim of this research study is to check the effect of various plastomers on high/low temperature performance of asphalt mixture. Four performance tests like Cooper wheel tracker, dynamic modulus, uniaxial repeated load and four-point bending beam test are used to evaluate the effect of different type of plastomers such as polyethylene terephthalate, high density and low density polyethylene with limestone aggregate quarry and 60/70 pen grade asphalt binder. This research study concludes that plastomer increases flexibility and hardness of asphalt mixtures and improves the rut resistance, dynamic modulus and fatigue life of asphalt mixtures. Plastomer modification shows significant benefits as compared to neat binder for high/low temperature performance. Moreover, it can be concluded that plastomer provides an efficient and economical blend of asphalt mixture.

A Hybrid Model to Predict the Gyratory Compaction of Hot Mixed Asphalt

2019 ◽  
Author(s):  
Teng Man
Keyword(s):  
Hybrid Model ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Aggregate Size ◽  
Asphalt Mixtures ◽  
Compaction Process ◽  
Particle Rearrangement ◽  
Compaction Behavior ◽  
Grain Size Distributions ◽  
Gyratory Compaction

The compaction of asphalt mixture is crucial to the mechanical properties and the maintenance of the pavement. However, the mix design, which based on the compaction properties, remains largely on empirical data. We found difficulties to relate the aggregate size distribution and the asphalt binder properties to the compaction behavior in both the field and laboratory compaction of asphalt mixtures. In this paper, we would like to propose a simple hybrid model to predict the compaction of asphalt mixtures. In this model, we divided the compaction process into two mechanisms: (i) visco-plastic deformation of an ordered thickly-coated granular assembly, and (ii) the transition from an ordered system to a disordered system due to particle rearrangement. This model could take into account both the viscous properties of the asphalt binder and grain size distributions of the aggregates. Additionally, we suggest to use the discrete element method to understand the particle rearrangement during the compaction process. This model is calibrated based on the SuperPave gyratory compaction tests in the pavement lab. In the end, we compared the model results to experimental data to show that this model prediction had a good agreement with the experiments, thus, had great potentials to be implemented to improve the design of asphalt mixtures.

Sign in / Sign up

Export Citation Format

Share Document