Novel Materials for Myco-Decontamination of Cyanide-Containing Wastewaters through Microbial Biotechnology

2021 ◽  
Vol 1037 ◽  
pp. 751-758
Author(s):  
Igor N. Pavlov ◽  
Yulia A. Litovka

This study examined the effectiveness of decontamination of industrial cyanide-containing water using mycelium-based lignocellulosic materials. These results suggest that fungi biomass and plant substrates can be used successfully in the treatment of wastewater contaminated by cyanide. Fungi were isolated from old wood samples taken from a tailing dam with high cyanide content (more than 20 years in semi-submerged condition). All isolated fungi belonged to the genus Fusarium. Fusarium oxysporum Schltdl. is most effective for biodegradation of cyanide-containing wastewaters (even at low temperatures). The most optimal lignocellulosic composition for production of mycelium-based biomaterial for biodegradation of cyanide wastewater consists of a uniform ratio of Siberian pine sawdust and wheat straw. The high efficiency of mycelium-based materials has been experimentally proven in vitro at 15-25 ° C. New fungal biomaterials are provide decrease in the concentration of cyanide ions to 79% (P <0.001). Large-scale cultivation of fungi biomass was carried out by the periodic liquid-phase cultivation. The submerged biomass from bioreactor was used as an inoculum for the production of mycelium-based materials for bioremediation of cyanide wastewater in situ (gold mine tailing).

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Jingli Yang ◽  
Songquan Wu ◽  
Chenghao Li

Embryogenic callus was obtained from mature seed explants on medium supplemented with 2,4-dichlorophenoxyacetic acid. Primary somatic embryos (SEs) can only develop into abnormal plants. Well-developed SEs could be obtained through secondary somatic embryogenesis both in solid and liquid cultures. Temperature strongly affected induction frequency of secondary embryogenesis. Relatively high temperature (30∘C) and germinated SEs explants were effective for induction of secondary somatic embryos, and low temperature (20∘C) was more suitable for further embryo development, plantlet conversion, and transplant survival. Somatic embryos formed on agar medium had larger cotyledons than those of embryos formed in liquid medium. Supplementing 0.1 mg L−16-benzyladenine (BA) was effective for plant conversion; the rate of plant conversion was 43.3% in somatic embryos from solid culture and 36.5% in embryos from liquid culture.In vitroplants were successfully acclimatized in the greenhouse. The protocol established in this study will be helpful for large-scale vegetative propagation of this medicinal tree.


2018 ◽  
Vol 54 (No. 4) ◽  
pp. 183-189
Author(s):  
Pranit Kumar Mukherjee ◽  
Raju Mondal ◽  
Sourav Dutta ◽  
Kanti Meena ◽  
Madhumita Roy ◽  
...  

An efficient in vitro micropropagation protocol has been developed using nodal explants of ramie (Boehmeria nivea), with maximum shoots (42) per explant in 5 passages (passage duration: 21 days) on Murashige and Skoog medium supplemented with 2.0 mg/l 6-benzyladenine and 2.0 mg/l AgNO<sub>3</sub>. ½ Murashige and Skoog medium containing 40% sucrose was found to be most effective for the rooting of in vitro developed shoots. Those plantlets were acclimatized and transferred to pots for hardening under glasshouse conditions. About 91% of mericlones survived and showed no ectopic expression in respect of any morphological character in comparison with the parental stock. Furthermore, clonal fidelity of the mericlones was confirmed by using DNA markers (random amplified polymorphic DNA and inter simple sequence repeats) and by polypeptide profiling through SDS-PAGE at a genomic and protein level, respectively, which showed the true-to-type nature of the in vitro micropropagated plants. Thus the protocol developed can be used to generate safe planting material for large-scale cultivation of ramie.  


Author(s):  
Adilson Costa ◽  
Marcos Vinicius Lacerda Oliveira ◽  
Roberta Tristão Pinto ◽  
Luiza Carvalheira Moreira ◽  
Ediellen Mayara Corrêa Gomes ◽  
...  

Glycerol is a subproduct of biodiesel production and represents an important problem when generated in large scale. Alternatives that can utilize this unrefined byproduct is of potential interest. It is herein described the synthesis of a series of 1,2,3-triazoles using glycerol as starting material. The key step involved in the preparation of triazolic derivatives corresponded to the Copper(I)-catalyzed Azide-Alkyne Cycloaddition (CuAAC), also known as click reaction, between 4-(azidomethyl)-2,2-dimethyl-1,3-dioxolane (3) and different terminal alkynes. The eight prepared derivatives were evaluated with regard to their fungicide, phytotoxic and cytotoxic activities. The fungicide activity was assessed in vitro against Colletotrichum gloeosporioides, the causing agent of papaya anthracnose. It was found that the compounds 1-(1-((2,2-dimethyl-1,3-dioxolan-4-yl)methyl)-1H-1,2,3-triazol-4-yl)cyclohexanol (4g) and 2-(1-((2,2-dimethyl-1,3-dioxolan-4-yl)methyl)-1H-1,2,3-triazol-4-yl)propan-2-ol (4h) demonstrated high efficiency on controlling C. gloeosporioides when compared to the commercial fungicide tebuconazole. The triazoles did not present any phytotoxic effect when evaluated against Lactuca sativa. However, five derivatives were mitodepressive, inducing cell death detected by the presence of condensed nuclei and acted as aneugenic agents in the cell cycle of L. sativa. It is believed that glycerol derivatives bearing 1,2,3-triazole functionalities may represent a scaffold to be explored toward the development of new agents to control C. gloeosporioides.


2016 ◽  
Author(s):  
Winston X. Yan ◽  
Reza Mirzazadeh ◽  
Silvano Garnerone ◽  
David Scott ◽  
Martin W. Schneider ◽  
...  

AbstractWe present a method for genome-wide DNA double-strand Breaks (DSBs) Labeling In Situ and Sequencing (BLISS) which, compared to existing methods, introduces several key features: 1) high efficiency and low input requirement by in situ DSB labeling in cells or tissue sections directly on a solid surface; 2) easy scalability by performing in situ reactions in multi-well plates; 3) high sensitivity by linearly amplifying tagged DSBs using in vitro transcription; and 4) accurate DSB quantification and control of PCR biases by using unique molecular identifiers. We demonstrate the ability to use BLISS to quantify natural and drug-induced DSBs in low-input samples of cancer cells, primary mouse embryonic stem cells, and mouse liver tissue sections. Finally, we applied BLISS to compare the specificity of CRISPR-associated RNA-guided endonucleases Cas9 and Cpf1, and found that Cpf1 has higher specificity than Cas9. These results establish BLISS as a versatile, sensitive, and efficient method for genome-wide DSB mapping in many applications.


Open Biology ◽  
2022 ◽  
Vol 12 (1) ◽  
Author(s):  
Yile Hao ◽  
Qinhua Wang ◽  
Jie Li ◽  
Shihui Yang ◽  
Yanli Zheng ◽  
...  

New CRISPR-based genome editing technologies are developed to continually drive advances in life sciences, which, however, are predominantly derived from systems of Type II CRISPR-Cas9 and Type V CRISPR-Cas12a for eukaryotes. Here we report a novel CRISPR-n(nickase)Cas3 genome editing tool established upon a Type I-F system. We demonstrate that nCas3 variants can be created by alanine-substituting any catalytic residue of the Cas3 helicase domain. While nCas3 overproduction via plasmid shows severe cytotoxicity, an in situ nCas3 introduces targeted double-strand breaks, facilitating genome editing without visible cell killing. By harnessing this CRISPR-nCas3 in situ gene insertion, nucleotide substitution and deletion of genes or genomic DNA stretches can be consistently accomplished with near-100% efficiencies, including simultaneous removal of two large genomic fragments. Our work describes the first establishment of a CRISPR-nCas3-based genome editing technology, thereby offering a simple, yet useful approach to convert the naturally most abundantly occurring Type I systems into advanced genome editing tools to facilitate high-throughput prokaryotic engineering.


2019 ◽  
Vol 70 (1) ◽  
pp. 292 ◽  
Author(s):  
W. Shao ◽  
R. Ebaid ◽  
M. El-Sheekh ◽  
A. Abomohra ◽  
H. Eladel

Recently, microalgae cultivation for different applications, including the production of nutritional and pharmaceutical active compounds has received increasing attention. Among the different genera, Spirulina (Arthrospira sp.) is one of the most promising blue-green microalgae (Cyanophyta) because it is rich in antioxidants, essential amino acids (EAAs), minerals, proteins, polyunsaturated fatty acids and vitamins. It has a high protein content (60-70% of the dry weight), which is a complete protein, i.e. containing all EAAs. Therefore, Spirulina is currently a commercial product with high nutritional value and also a significant source of complementary and alternative medicine. The objective of the present work was to review the pharmaceutical and therapeutic applications of Spirulina, especially its antioxidant, anti-inflammatory, anti-cancer, anti-microbial, anti-diabetic, anti-obesity and anti-toxicity properties. The results were obtained from experiments in the literature performed in vitro and in vivo using experimental animals. The main reported active ingredients in Spirulina include phycocyanin, tocopherol, β-carotene, caffeic acids and chlorogenic acid, which showed individual or synergetic effects. In addition, the present review discusses the future perspectives of genetically modified Spirulina as a source for industrial products while producing valuable biomass photoautotrophically. Furthermore, the consequent environmental impacts of large-scale cultivation of Spirulina are discussed.


1967 ◽  
Vol 15 (1) ◽  
pp. 201-202
Author(s):  
A Hellman ◽  
J D Regan ◽  
D H Martin

Crystals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1509
Author(s):  
Yuzheng Lu ◽  
Naila Arshad ◽  
Muhammad Sultan Irshad ◽  
Iftikhar Ahmed ◽  
Shafiq Ahmad ◽  
...  

A facile approach for developing an interfacial solar evaporator by heat localization of solar-thermal energy conversion at water-air liquid composed by in-situ polymerization of Fe2O3 nanoparticles (Fe2O3@PPy) deposited over a facial sponge is proposed. The demonstrated system consists of a floating solar receiver having a vertically cross-linked microchannel for wicking up saline water. The in situ polymerized Fe2O3@PPy interfacial layer promotes diffuse reflection and its rough black surface allows Omni-directional solar absorption (94%) and facilitates efficient thermal localization at the water/air interface and offers a defect-rich surface to promote heat localization (41.9 °C) and excellent thermal management due to cellulosic content. The self-floating composite foam reveals continuous vapors generation at a rate of 1.52 kg m−2 h−1 under one 1 kW m−2 and profound evaporating efficiency (95%) without heat losses that dissipates in its surroundings. Indeed, long-term evaporation experiments reveal the negligible disparity in continuous evaporation rate (33.84 kg m−2/8.3 h) receiving two sun solar intensity, and ensures the stability of the device under intense seawater conditions synchronized with excellent salt rejection potential. More importantly, Raman spectroscopy investigation validates the orange dye rejection via Fe2O3@PPy solar evaporator. The combined advantages of high efficiency, self-floating capability, multimedia rejection, low cost, and this configuration are promising for producing large-scale solar steam generating systems appropriate for commercial clean water yield due to their scalable fabrication.


2021 ◽  
Author(s):  
Yile Hao ◽  
Qinhua Wang ◽  
Jie Li ◽  
Shihui Yang ◽  
Lixin Ma ◽  
...  

New CRISPR-based genome editing technologies are developed to continuedly drive advances in life sciences, which, however, are predominantly derived from systems of Type II CRISPR-Cas9 and Type V CRISPR-Cas12a for eukaryotes. Here we report a novel CRISPR-n(nickase)Cas3 genome editing tool established upon an endogenous Type I system of Zymomonas mobilis. We demonstrate that nCas3 variants can be created by alanine-substituting any catalytic residue of the Cas3 helicase domain. While nCas3 overproduction via plasmid shows severe cytotoxicity; an in situ nCas3 introduces targeted double-strand breaks, facilitating genome editing, without visible cell killing. By harnessing this CRISPR-nCas3, deletion of genes or genomic DNA stretches can be consistently accomplished with near-100% efficiencies, including simultaneous removal of two large genomic fragments. Our work describes the first establishment of a CRISPR-nCas3-based genome editing technology, thereby offering a simple, easy, yet useful approach to convert many endogenous Type I systems into advanced genome editing tools. We envision that many CRISPR-nCas3-based toolkits would be soon available for various industrially important non-model bacteria that carry active Type I systems to facilitate high-throughput prokaryotic engineering.


Blood ◽  
2021 ◽  
Vol 138 (Supplement 1) ◽  
pp. 4287-4287
Author(s):  
Hyunjun Kim ◽  
Danuta Jadwiga Jarocha ◽  
Ian Johnston ◽  
Hyunsook Ahn ◽  
Deborah L French ◽  
...  

Abstract The questions of whether thrombopoiesis - the release of platelets from megakaryocytes - occurs both as megakaryocytes emerge from the intramedullar space or occurs as well in the pulmonary vascular bed remains unanswered. Studies by Lefrançais E, et al, (Nature, 2017) demonstrated by in situ microcopy that perhaps 50% of all platelet release in mice occurs from megakaryocytes released from the marrow and traveled to the lungs where they undergo thrombopoiesis over a 20- to 60-minute time-period. We examined whether CD34+-derived human megakaryocytes infused into immunocompromized NSG mice would also shed platelets in the lungs in a similar fashion. We differentiated CD34+-derived hematopoietic stem-progenitors for 12 days in culture using conditions previously described (Wang Y, et al., Blood 2015). We found that unlike platelet-like-particle (PLP) formation in in vitro cultures of CD34+ hematopoietic progenitor cell (HPC)-derived (CD34+) megakaryocytes, which undergo asynchronous shedding of the PLPs, that over 95% of infused CD34+ megakaryocytes shed their platelets within the first 40 minutes much as has been observed for endogenous murine megakaryocytes. The average number of cytoplasmic extensions per megakaryocytes was ~2.7, again very similar to what was seen with endogenous murine megakaryocytes. In contrast, CD34+ cells grown in culture into megakaryocytes for a shorter period of time of only 7 days, poorly shed any cytoplasmic fragments. We also studied human megakaryocytes grown from immortalized megakaryocyte progenitor cell lines (imMKCLs) from induced pluripotent stem cells (iPSCs) generated by the Eto laboratory and kindly provided by Dr. Koji Eto, Kyoto University). These cells were grown and differentiated into terminal megakaryocytes as described (Nakamura S, Cell Stem Cell, 2014) for 4 days in culture. These cells have been proposed to be useful for large-scale preparation of PLPs in vitro for clinical use in place of donor-derived platelets. The resultant infused human imMKCL-derived megakaryocytes also synchronously shed platelets, but only 50% of the infused cells shed their cytoplasm in contrast to &gt;95% of CD34+ megakaryocytes. Moreover, cytoplasmic extensions were decreased to an average of ~1.1 per megakaryocyte. We had proposed that in vitro-generated megakaryocytes might be directly infused into patients in place of further manipulating the megakaryocytes to release functional platelets in vitro using a bioreactor. However, such megakaryocytes will likely be contaminated with a higher level of HPCs than anticipated from in vitro-prepared platelets, and concern exists that they may lead to unacceptable graft versus host complications. We, therefore, examined whether irradiating megakaryocytes as one strategy to eliminate this concern results in megakaryocytes that are still functional and found that megakaryocytes irradiated with up to 25 Gy retain platelet yield per infused megakaryocytes with the platelets having the same half-life. If irradiated and kept in culture, these megakaryocytes begin to shed platelets and undergo apoptosis notably by 24 hours. We also examined whether the pulmonary bed differs from other vascular beds, and infused CD34+ megakaryocytes both intravenously and intra-arterially in parallel studies and found that following intra-arterial infusion, megakaryocytes were mostly entrapped in various organs, but shed few platelets. Thus, our studies suggest that the pulmonary bed is unique for platelet shedding from entrapped megakaryocytes. Whether this is due to the structural organization of the pulmonary beds, its endothelial lining, its reverse exchange in oxygen, carbon dioxide and pH from other capillary beds or the mechanical forces of inhalation and exhalation that expand and contract the capillary cross-sectional area needs to be examined. Our studies show that infused human megakaryocytes synchronously release platelets over a 40-minute window and can do so even after being irradiated and that this occurs specifically in the lungs not only has potential clinical application, but also raises biological questions about what determines thrombopoiesis-readiness and what are the features of the pulmonary bed that allows this synchronous release. Figure 1 Figure 1. Disclosures No relevant conflicts of interest to declare.


Sign in / Sign up

Export Citation Format

Share Document