Characterization of Al/SiC Nanocomposite Prepared by Mechanical Alloying Method

2007 ◽  
Vol 553 ◽  
pp. 257-265 ◽  
Author(s):  
Ali Shokuhfar ◽  
M.R. Dashtbayazi ◽  
M.R. Alinejad ◽  
Tolou Shokuhfar
Keyword(s):  
Particle Size ◽  
Mechanical Alloying ◽  
Research Work ◽  
High Energy ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
High Energy Ball Mill ◽  
Energy Ball ◽  
Nanocomposite Powders

In this research work, a high-energy ball mill has been applied to prepare an Al/SiC nanocomposite. The formation mechanism of the nanocomposite was investigated. This nanocomposite contained the nanocrystalline characteristics. Crystallite size, lattice strain and particle size of the nanocomposite as a function of milling time were determined. SEM micrographs showed that the nanocomposite powders agglomerated after milling. The particle size analysis confirmed the agglomeration of the nanocomposite particles. TEM observations showed that the SiC particles were in the nanometer size and these particles embedded in the Al matrix, and the nanocomposite produced in the final stage of mechanical alloying. In addition, a simple model checked for the refinement of the crystallite and the particle size of nanocomposite.

Ball milling for the formation of nanocrystalline intermetallic compounds from Ni-Ti elemental powders

2018 ◽  
Vol 27 (5-6) ◽  
Author(s):  
Pardeep Sharma
Keyword(s):  
Intermetallic Compounds ◽  
Milling Time ◽  
Lattice Strain ◽  
Research Work ◽  
High Energy ◽  
Mechanically Alloyed ◽  
Nano Crystalline ◽  
High Energy Ball Mill ◽  
Productive Process ◽  
Energy Ball

AbstractIn the present research work nickel (Ni) and titanium (Ti) elemental powder with an ostensible composition of 50% of each by weight were mechanically alloyed in a planetary high energy ball mill in diverse milling circumstances (10, 20, 30 and 60 h). The inspection exposed that increasing milling time leads to a reduction in crystallite size, and after 60 h of milling, the Ti dissolved in the Ni lattice and the NiTi (B2) phase was obtained. The lattice strain of ball milled mixtures augmented from 0.15 to 0.45 at 60 h milling. With increase in milling time the morphology of pre-alloyed powder changed from lamella to globular. Annealing of as-milled powders at 1100 K for 800 s led to the formation of NiTi (B19′), grain growth and the release of internal strain. The result indicated that this technique is a powerful and highly productive process for preparing NiTi intermetallic compounds with a nano-crystalline structure and appropriate morphology.

scholarly journals PREPARATION AND CHARACTERIZATION OF ANTI-ACNE ETHOSOMES USING COLD AND THIN-LAYER HYDRATION METHODS

2018 ◽  
Vol 10 (1) ◽  
pp. 338
Author(s):  
Rachmawati Ramadhana Mustofa ◽  
Iskandarsyah .
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Thin Layer ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Multilamellar Vesicles ◽  
Zeta Potentials ◽  
Small Unilamellar Vesicles

Objective: This study aimed to prepare and characterize anti-acne ethosomes using the cold- and thin-layer hydration methods.Methods: A sonication step was included during ethosome preparation to improve the quality of the cold method. Azelaic acid, Phospholipon 90G,ethanol, propylene glycol, and phosphate buffer (pH 7.4) were used in the procedures. Prepared ethosomal suspensions were characterized usingtransmission electron microscopy, particle-size analysis, and spectrophotometry.Results: Ethosomes prepared using the thin-layer hydration method (F1) had small unilamellar vesicles, while those prepared using the cold methodwith 15-min sonication (F4) showed spherical, elliptical, unilamellar, and multilamellar vesicles. F1 ethosomes had a Dmean volume of 648.57±231.26,whereas those prepared using the cold method with 5- (F2), 10- (F3), and 15-min (F4) sonication had Dmean volumes of 2734.04±231.49 nm,948.90±394.52 nm, and 931.69±471.84 nm, respectively. Polydispersity indices of F2, F3, and F4 ethosomes were 0.74±0.21, 0.86±0.05, and 0.91±0.03,respectively, with a poor particle-size distribution, compared to that of F1 (0.39±0.01). Zeta potentials of F1–F4 ethosomes were −38.27±1.72 mV,−23.53±1.04 mV, −31.4±1.04 mV, and −34.3±1.61 mV, respectively. Entrapment efficiencies of F1–F4 ethosomes were 90.71±0.11%, 53.84±3.16%,72.56±0.28%, and 75.11±1.42%, respectively.Conclusion: Anti-acne ethosomes produced using the thin-layer hydration method had superior properties than those produced using the coldmethod with 15-min sonication.

Synthesis and Characterization of Nanocrystalline Hydroxyapatite Powder

2015 ◽  
Vol 1087 ◽  
pp. 142-146 ◽  
Author(s):  
Rosli Asmawi ◽  
Mohd Halim Irwan Ibrahim ◽  
Azriszul Mohd Amin ◽  
Najwa Mustapha ◽  
Iis Sopyan
Keyword(s):  
Particle Size ◽  
Calcium Phosphate ◽  
High Surface ◽  
High Surface Area ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Heating Process ◽  
X Ray Diffraction ◽  
Nanocrystalline Hydroxyapatite

Nanocrystalline hydroxyapatite (HA) powder was synthesized by a simple heating process involving simple chemical reaction. The characterization of the produced powder showed that the powder is nanosize with particle in the range of 30-70 mm in diameter and almost evenly spherical in shape. The powder also has a high surface area of 43.16 m2/g. Field Emission Scanning Electron Microscopy (FESEM) observation showed the crystallite and particle size become bigger with an increment of calcination temperature, indicating increasing of crystallinity.. FESEM observation showed the particle size become bigger with an increment of calcinations temperature. It is in agreement with the crystallite size analysis, obtained by Scherer’s formula and particle size analysis, measured by nanoSizer. X-ray Diffraction (XRD) and Fourier Transform Infra Red Spectroscopy (FTIR) analyses exhibited the same result, where HA phase was clearly observed at at various temperatures up to 600 ̊C. However, at temperature more than 600 ̊C, Tri calcium phosphate (TCP) phase appeared suppressing the HA phase, producing biphasic calcium phosphate.

Characterization and Granulometric Correction Soil for the Production of Soil-Cement Blocks for Two Method, Particle Size and X-Ray Florescence to be Inserted in Phase Change Materials (PCMS)

2014 ◽  
Vol 798-799 ◽  
pp. 355-359 ◽  
Author(s):  
Valter Bezerra Dantas ◽  
U.U. Gomes ◽  
A.B. Vital ◽  
G.S. Marinho ◽  
Ariadne de Souza Silva
Keyword(s):  
Particle Size ◽  
Phase Change Materials ◽  
Clay Content ◽  
Particle Size Analysis ◽  
Liquid Limit ◽  
Size Analysis ◽  
X Ray ◽  
Soil Cement

This paper presents the results of tests for characterization of soil samples collected in Mossoró-RN, UFERSA-RN Campus (5 ° 12'34 .68 "South latitude, 37 ° 19 '5.74 "west longitude), for the purpose of producing soil-cement for the manufacture of pressed blocks. Objective of improving the quality of soil-cement, and provide conditions for the use of the soil making it ideal for the production of soil-cement block. Tests of compaction, particle size analysis, plastic limit, liquid limit and correct particle size, X-ray fluorescence and morphology by scanning electron microscopy (SEM). It was concluded that the soil needs correction particle size, due to the high clay content. The method combined grading, sieving, sedimentation and blooming X-ray as the fastest and most accurate in correcting soil particle size.

SYNTHESIS OF NANO-CRYSTALLINE Cu-Cr ALLOY BY MECHANICAL ALLOYING

2012 ◽  
Vol 05 ◽  
pp. 496-501 ◽  
Author(s):  
S. SHEIBANI ◽  
S. HESHMATI-MANESH ◽  
A. ATAIE
Keyword(s):  
Mechanical Alloying ◽  
Structural Evolution ◽  
High Energy ◽  
Lattice Parameter ◽  
Control Agent ◽  
Milling Process ◽  
X Ray Diffraction ◽  
Nano Crystalline ◽  
High Energy Ball Mill ◽  
Energy Ball

In this paper, the influence of toluene as the process control agent (PCA) and pre-milling on the extension of solid solubility of 7 wt.% Cr in Cu by mechanical alloying in a high energy ball mill was investigated. The structural evolution and microstructure were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques, respectively. The solid solution formation at different conditions was analyzed by copper lattice parameter change during the milling process. It was found that both the presence of PCA and pre-milling of Cr powder lead to faster dissolution of Cr . The mean crystallite size was also calculated and showed to be about 10 nm after 80 hours of milling.

Technological Aspects of Fe-Al-Si Intermetallic Alloy Preparation by Mechanical Alloying

2019 ◽  
Vol 810 ◽  
pp. 101-106 ◽  
Author(s):  
Petr Haušild ◽  
Jaroslav Čech ◽  
Veronika Kadlecová ◽  
Miroslav Karlík ◽  
Filip Průša ◽  
...  
Keyword(s):  
Mechanical Alloying ◽  
Ball Mill ◽  
High Energy ◽  
Intermetallic Alloy ◽  
Alloyed Powder ◽  
Temperature Oxidation ◽  
High Energy Ball Mill ◽  
Speed Up ◽  
Energy Ball ◽  
Kinetics Of

In this paper, recently developed ternary FeAl20Si20 (wt.%) alloy with promising high-temperature oxidation and wear resistance was prepared by mechanical alloying in a high-energy ball mill. The possibility to speed-up the mechanical alloying process by replacing aluminium (and partly silicon) elemental powder by the pre-alloyed powder (AlSi30) with relatively fine dispersion of Si in the Al-Si eutectic was examined. The microstructure, phase composition and mechanical properties after various time of mechanical alloying were characterized. The effect of using the pre-alloyed powders on kinetics of mechanical alloying is compared with the results obtained on batches prepared from elemental powders.

Inhalation of nail dust from onychomycotic toenails. Part I. Characterization of particles. 1984

1992 ◽  
Vol 82 (2) ◽  
pp. 111-115 ◽  
Author(s):  
C Abramson ◽  
J Wilton
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Particle Size ◽  
Total Mass ◽  
Particle Size Analysis ◽  
Dust Particles ◽  
Size Analysis ◽  
Scanning Electron

Nail dust particles were analyzed by scanning electron microscopy for size and topography. The percentage of "fines" that could be inhaled and deposited in the alveoli and bronchioles were determined by quantitative particle size analysis. Distribution representing the largest total mass was graphed between 1 and 2 microns. The authors found that 86% of nail dust would reach the bronchioles and alveoli, and 31% could be expected to deposit in these areas.

Sign in / Sign up

Export Citation Format

Share Document