Osteoblast Behaviour on Nanostructured Ti-Bioceramic Composites

2011 ◽  
Vol 674 ◽  
pp. 153-158 ◽  
Author(s):  
Karolina Jurczyk ◽  
Katarzyna Niespodziana ◽  
M.U. Jurczyk ◽  
Mieczyslaw Jurczyk
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Biological Properties ◽  
Grain Structure ◽  
Good Adhesion ◽  
Ti Alloys ◽  
Mechanical Properties And Corrosion ◽  
45S5 Bioglass ◽  
Dental Applications

Ti and Ti-based alloys are preferred materials in the production of implants in both medical and dental applications. One of the methods that allow the change of biological properties of Ti alloys is the modification of their chemical composition and microstructure. In this study, new biocompatible, nanostructured Ti-x vol% SiO2, Ti-x vol% 45S5 Bioglass, and Ti-x vol% HAp (x=0, 3, 10) materials have been developed, manufactured and studied in terms of their biocompatibility. These materials give the possibility of controlling in detail the grain structure and the composition of the alloy and, consequently, the mechanical and biocompatibility performances. Our results of in vitro studies show that these bionanocomposites have excellent biocompatibility and could integrate with bone. After 1st day of incubation cells show good adhesion to the surface of studied samples in the form of filopodia. After 5 days of incubation, the typical monolayer was observed. With regard to microcrystalline Ti it could help to obtain better dental implants with better mechanical properties and corrosion resistance.

scholarly journals Assessment of Mechanical, Chemical, and Biological Properties of Ti-Nb-Zr Alloy for Medical Applications

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 126
Author(s):  
Viktoria Hoppe ◽  
Patrycja Szymczyk-Ziółkowska ◽  
Małgorzata Rusińska ◽  
Bogdan Dybała ◽  
Dominik Poradowski ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Base Material ◽  
Biological Properties ◽  
Β Phase ◽  
Alloy Base ◽  
Static Tensile ◽  
Examination Methods ◽  
13Zr Alloy ◽  
Dental Applications

The purpose of this work is to obtain comprehensive reference data of the Ti-13Nb-13Zr alloy base material: its microstructure, mechanical, and physicochemical properties. In order to obtain extensive information on the tested materials, a number of examination methods were used, including SEM, XRD, and XPS to determine the phases occurring in the material, while mechanical properties were verified with static tensile, compression, and bending tests. Moreover, the alloy’s corrosion resistance in Ringer’s solution and the cytotoxicity were investigated using the MTT test. Studies have shown that this alloy has the structure α’, α, and β phases, indicating that parts of the β phase transformed to α’, which was confirmed by mechanical properties and the shape of fractures. Due to the good mechanical properties (E = 84.1 GPa), high corrosion resistance, as well as the lack of cytotoxicity on MC3T3 and NHDF cells, this alloy meets the requirements for medical implant materials. Ti-13Nb-13Zr alloy can be successfully used in implants, including bone tissue engineering products and dental applications.

REMANIT 4439

Alloy Digest ◽  
1993 ◽  
Vol 42 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Low Carbon ◽  
Corrosion Resistant ◽  
Mechanical Properties And Corrosion

Abstract REMANIT 4439 is a highly corrosion resistant steel with low carbon content, an addition of nitrogen to enhance both mechanical properties and corrosion resistance, and higher molybdenum than most stainless steels to resist pitting and crevice corrosion in chloride media. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-556. Producer or source: Thyssen Stahl AG.

scholarly journals Mechanical Properties, Corrosion Resistance and Bioactivity of Oxide Layers Formed by Isothermal Oxidation of Ti-6Al-7Nb Alloy

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 505
Author(s):  
Krzysztof Aniołek ◽  
Bożena Łosiewicz ◽  
Julian Kubisztal ◽  
Patrycja Osak ◽  
Agnieszka Stróż ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Contact Potential Difference ◽  
Isothermal Oxidation ◽  
Potential Method ◽  
Open Circuit ◽  
Kelvin Probe ◽  
Contact Potential ◽  
Oxide Layers

Titanium and its alloys are among the most promising biomaterials for medical applications. In this work, the isothermal oxidation of Ti-6Al-7Nb biomedical alloy towards improving its mechanical properties, corrosion resistance, and bioactivity has been developed. The oxide layers were formed at 600, 700, and 800 °C for 72 h. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), 3D profilometry, and microindentation test, were used to characterize microstructure, surface geometrical structure, and the hardness of the diphase (α + β) Ti-6Al-7Nb alloy after oxidation, respectively. In vitro corrosion resistance tests were carried out in a saline solution at 37 °C using the open-circuit potential method and potentiodynamic measurements. Electronic properties in the air were studied using the Scanning Kelvin Probe (SKP) technique. The bioactivity test was conducted by soaking the alkali- and heat-treated samples in simulated body fluid for 7 days. The presence of apatite was confirmed using SEM/EDS and Fourier Transform Infrared Spectroscopy (FTIR) studies. The thickness of oxide layers formed increased with the temperature growth from 0.25 to 5.48 µm. It was found that with increasing isothermal oxidation temperature, the surface roughness, hardness, corrosion resistance, and contact potential difference increased. The Ti-6Al-7Nb alloy after oxidation revealed the HAp-forming ability in a biological environment.

Sign in / Sign up

Export Citation Format

Share Document