In vitro biocompatibility, mechanical properties, and corrosion resistance of TiZrNbTaPd and TiSnNbTaPd alloys

1995 ◽  
Vol 29 (7) ◽  
pp. 893-899 ◽  
Author(s):  
Atsuo Ito ◽  
Yoshimitsu Okazaki ◽  
Tetsuya Tateishi ◽  
Yoshimasa Ito
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
In Vitro Biocompatibility ◽  
Mechanical Properties And Corrosion

Characterization of NiCrMo Dental Restoration Alloy

2021 ◽  
Vol 875 ◽  
pp. 373-378
Author(s):  
Ali Haider ◽  
Omar Farooq Azam ◽  
Muhammad Talha ◽  
Saleem Akhtar
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Dental Materials ◽  
Dental Restoration ◽  
Restorative Material ◽  
Nicr Alloy ◽  
In Vitro Biocompatibility ◽  
Dental Prostheses ◽  
Materials Used

Restorative material is a class of dental materials used for direct filling and fabrication of indirect restoration. NiCr alloy is a restorative material frequently used for dental prostheses due to its properties and economic reasons. In present work beryllium free NiCrMo alloy was developed and studied for dental restoration application. The alloy have unique characteristics of resistance to oxidation and biocompatibility; the requisites for dental prostheses. NiCrMo alloy is found to possess mechanical strength and fabrication properties suitable for dental repairs. In this study the developed alloy was tested for its mechanical properties, biocompatibility and corrosion resistance. An in-vitro biocompatibility study was carried out. No signs of toxicity and no signs of cell growth inhibition, in presence of NiCrMo alloy specimen, were observed. Mechanical properties and corrosion resistance are found in the range that is suitable for dental prostheses and easy fabrication.

Osteoblast Behaviour on Nanostructured Ti-Bioceramic Composites

2011 ◽  
Vol 674 ◽  
pp. 153-158 ◽  
Author(s):  
Karolina Jurczyk ◽  
Katarzyna Niespodziana ◽  
M.U. Jurczyk ◽  
Mieczyslaw Jurczyk
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Biological Properties ◽  
Grain Structure ◽  
Good Adhesion ◽  
Ti Alloys ◽  
Mechanical Properties And Corrosion ◽  
45S5 Bioglass ◽  
Dental Applications

Ti and Ti-based alloys are preferred materials in the production of implants in both medical and dental applications. One of the methods that allow the change of biological properties of Ti alloys is the modification of their chemical composition and microstructure. In this study, new biocompatible, nanostructured Ti-x vol% SiO2, Ti-x vol% 45S5 Bioglass, and Ti-x vol% HAp (x=0, 3, 10) materials have been developed, manufactured and studied in terms of their biocompatibility. These materials give the possibility of controlling in detail the grain structure and the composition of the alloy and, consequently, the mechanical and biocompatibility performances. Our results of in vitro studies show that these bionanocomposites have excellent biocompatibility and could integrate with bone. After 1st day of incubation cells show good adhesion to the surface of studied samples in the form of filopodia. After 5 days of incubation, the typical monolayer was observed. With regard to microcrystalline Ti it could help to obtain better dental implants with better mechanical properties and corrosion resistance.

REMANIT 4439

Alloy Digest ◽  
1993 ◽  
Vol 42 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Low Carbon ◽  
Corrosion Resistant ◽  
Mechanical Properties And Corrosion

Abstract REMANIT 4439 is a highly corrosion resistant steel with low carbon content, an addition of nitrogen to enhance both mechanical properties and corrosion resistance, and higher molybdenum than most stainless steels to resist pitting and crevice corrosion in chloride media. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-556. Producer or source: Thyssen Stahl AG.

scholarly journals Mechanical Properties, Corrosion Resistance and Bioactivity of Oxide Layers Formed by Isothermal Oxidation of Ti-6Al-7Nb Alloy

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 505
Author(s):  
Krzysztof Aniołek ◽  
Bożena Łosiewicz ◽  
Julian Kubisztal ◽  
Patrycja Osak ◽  
Agnieszka Stróż ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Contact Potential Difference ◽  
Isothermal Oxidation ◽  
Potential Method ◽  
Open Circuit ◽  
Kelvin Probe ◽  
Contact Potential ◽  
Oxide Layers

Titanium and its alloys are among the most promising biomaterials for medical applications. In this work, the isothermal oxidation of Ti-6Al-7Nb biomedical alloy towards improving its mechanical properties, corrosion resistance, and bioactivity has been developed. The oxide layers were formed at 600, 700, and 800 °C for 72 h. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), 3D profilometry, and microindentation test, were used to characterize microstructure, surface geometrical structure, and the hardness of the diphase (α + β) Ti-6Al-7Nb alloy after oxidation, respectively. In vitro corrosion resistance tests were carried out in a saline solution at 37 °C using the open-circuit potential method and potentiodynamic measurements. Electronic properties in the air were studied using the Scanning Kelvin Probe (SKP) technique. The bioactivity test was conducted by soaking the alkali- and heat-treated samples in simulated body fluid for 7 days. The presence of apatite was confirmed using SEM/EDS and Fourier Transform Infrared Spectroscopy (FTIR) studies. The thickness of oxide layers formed increased with the temperature growth from 0.25 to 5.48 µm. It was found that with increasing isothermal oxidation temperature, the surface roughness, hardness, corrosion resistance, and contact potential difference increased. The Ti-6Al-7Nb alloy after oxidation revealed the HAp-forming ability in a biological environment.

scholarly journals Effect of Microwave and Conventional Modes of Heating on Sintering Behavior, Microstructural Evolution and Mechanical Properties of Al-Cu-Mn Alloys

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3675
Author(s):  
A. Muthuchamy ◽  
Muthe Srikanth ◽  
Dinesh K. Agrawal ◽  
A. Raja Annamalai
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Aluminum Alloys ◽  
Sintered Sample ◽  
Sintering Behavior ◽  
Sintered Alloy ◽  
Conventional Radiation ◽  
Sintered Aluminum ◽  
Electron Microscopes ◽  
Mechanical Properties And Corrosion

In this research, we intended to examine the effect of heating mode on the densification, microstructure, mechanical properties, and corrosion resistance of sintered aluminum alloys. The compacts were sintered in conventional (radiation-heated) and microwave (2.45 GHz, multimode) sintering furnaces followed by aging. Detailed analysis of the final sintered aluminum alloys was done using optical and scanning electron microscopes. The observations revealed that the microwave sintered sample has a relatively finer microstructure compared to its conventionally sintered counterparts. The experimental results also show that microwave sintered alloy has the best mechanical properties over conventionally sintered compacts. Similarly, the microwave sintered samples showed better corrosion resistance than conventionally sintered ones.

Enhanced mechanical properties and corrosion resistance of rolled Mg-1.5Sn-0.5Ca alloy by Ce microalloying

2021 ◽  
pp. 111325
Author(s):  
Chunming Wang ◽  
Luming Zeng ◽  
Wenlong Zhang ◽  
Fuqian Tang ◽  
Wucheng Ding ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Mechanical Properties And Corrosion
Sign in / Sign up

Export Citation Format

Share Document