Non-Destructive Tests as Durability Indicators in Cement Mortars with Pozzolanic Substitutions

2017 ◽  
Vol 902 ◽  
pp. 9-13
Author(s):  
Rosalía Ruiz Ruiz ◽  
Elia Mercedes Alonso Guzmán ◽  
Wilfrido Martínez Molina ◽  
Hugo Luis Chávez García ◽  
Judith Alejandra Velázquez Perez
Keyword(s):  
Mechanical Characteristics ◽  
Ultrasonic Pulse Velocity ◽  
Good Alternative ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Cement Industry ◽  
Capillary Absorption ◽  
Pozzolanic Material ◽  
Cement Mortars ◽  
Non Destructive

Cement industry is responsible of 5-7% of CO2 emissions to the atmosphere. This is preoccupant because this is one of the greenhouse effect gases which cause global warming. Pozzolanic material incorporation in cement mortars elaboration represents a good alternative to partially substitute cement, since its chemical composition could contribute to improvement of its durability and mechanical characteristics. In this research, mortars with pozzolanic substitutions are evaluated through non-destructive tests as: capillary absorption, electrical resistivity, and ultrasonic pulse velocity to the age of 1000 days. The results suggested that the incorporation of pozzolanic material as partial substitutes of Portland cement increases the mortars properties mainly in substitutions of CBC 20%, PN 10, and 30%.

scholarly journals Strength and Durability Assessment of Portland Cement Mortars Formulated from Hydrogen-Rich Water

2017 ◽  
Vol 2017 ◽  
pp. 1-10
Author(s):  
Byung Wan Jo ◽  
Muhammad Ali Sikandar ◽  
Sumit Chakraborty ◽  
Zafar Baloch
Keyword(s):  
Portland Cement ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Capillary Absorption ◽  
X Ray Diffraction ◽  
Degree Of Hydration ◽  
Cement Mortars ◽  
Durability Assessment ◽  
Strength And Durability

We investigated the effects of hydrogen-rich water (HRW) on the strength and durability of Portland cement mortars. We comparatively assessed the performances of HRW-based mortars (HWMs) with respect to cement mortars fabricated from control water (CWM). The results indicate that the use of HRW significantly improves the compressive, flexural, and splitting tensile strength of mortars at both the early and later ages of curing. Durability was assessed in terms of capillary absorption, ultrasonic pulse velocity (UPV), dynamic elastic modulus (DEM), and electrical resistivity (ER). We attribute the generally improved mechanical and durability properties of HWMs to the formation of more cement hydrates with fewer voids in the hydrogen-rich environment. Based on X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscope (SEM) analyses, we deduce that the use of HRW in Portland cement mortars produces a more compact, dense, and durable microstructure with fewer voids due to a higher degree of hydration.

scholarly journals Assessment of Concrete Compressive Strength by Ultrasonic Non-Destructive Test

2021 ◽  
Vol 318 ◽  
pp. 03004
Author(s):  
AbdulMuttalib I. Said ◽  
Baqer Abdul Hussein Ali
Keyword(s):  
Compressive Strength ◽  
Salt Content ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Experimental Program ◽  
Concrete Compressive Strength ◽  
Statistical Program ◽  
Non Destructive ◽  
Accurate Relation

This paper has carried out an experimental program to establish a relatively accurate relation between the ultrasonic pulse velocity (UPV) and the concrete compressive strength. The program involved testing concrete cubes of (100) mm and prisms of (100×100×300) cast with specified test variables. The samples are tested by using ultrasonic test equipment with two methods, direct ultrasonic pulse (DUPV) and surface (indirect) ultrasonic pulse (SUPV) for each sample. The obtained results were used as input data in the statistical program (SPSS) to predict the best equation representing the relation between the compressive strength and the ultrasonic pulse velocity. In this research 383 specimens were tested, and an exponential equation is proposed for this purpose. The statistical program has been used to prove which type of UPV is more suitable, the (SUPV) test or the (DUPV) test, to represent the relation between the ultrasonic pulse velocity and the concrete compressive strength. In this paper, the effect of salt content on the connection between the ultrasonic pulse velocity and the concrete compressive strength has also been studied.

scholarly journals Effects of a Real Exposure Class XC4 Mediterranean Climate Environment in the Behavior of Mortars Made Using Ternary Binders with Addition of Slag, Fly Ash and Limestone

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5848
Author(s):  
Javier Ibáñez-Gosálvez ◽  
Teresa Real-Herraiz ◽  
José Marcos Ortega
Keyword(s):  
Fly Ash ◽  
Mediterranean Climate ◽  
Mechanical Performance ◽  
Ultrasonic Pulse Velocity ◽  
Pore Network ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Cement Industry ◽  
Granulated Blast Furnace Slag ◽  
Compressive And Flexural Strengths

For improving the contribution of the cement industry to mitigate global warming, many strategies have been put into practice, such as the use of eco-friendly cements with the incorporation of additions substituting clinker. Nevertheless, the use of ternary binders for the production of commercial cements is still reduced, particularly in Spain. The purpose of this research is to characterize the long-term influence produced by the exposure to a real in situ inland Mediterranean climate condition in the pore network, parameters related to durability and mechanical performance of mortars made with ternary binders, which incorporated limestone, fly ash, and ground granulated blast-furnace slag, in comparison with mortars without additions and binary blended mortars. The site verified the specifications of exposure class XC4 of Eurocode 2. The ternary and binary binders accomplished the prescriptions of cement type CEM II/B. The pore network was studied with mercury intrusion porosimetry and electrical resistivity. Water absorption, diffusion coefficient, carbonation depth, ultrasonic pulse velocity, compressive and flexural strengths have been determined. The exposure to the environment produced after 250 days an increase in porosity, a loss of pore refinement, a rise of the carbonation depths, and a reduction in the mechanical strengths, highlighting the better overall performance of ternary mortar with both fly ash and slag.

Non-Destructive Testing for Concrete: Dynamic Modulus and Ultrasonic Velocity Measurements

2011 ◽  
Vol 243-249 ◽  
pp. 165-169 ◽  
Author(s):  
Iqbal Khan Mohammad
Keyword(s):  
Compressive Strength ◽  
Modulus Of Elasticity ◽  
Dynamic Modulus ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Non Destructive Testing ◽  
Destructive Testing ◽  
Dynamic Modulus Of Elasticity ◽  
Non Destructive

Nondestructive testing (NDT) is a technique to determine the integrity of a material, component or structure. The commonly NDT methods used for the concrete are dynamic modulus of elasticity and ultrasonic pulse velocity. The dynamic modulus of elasticity of concrete is related to the structural stiffness and deformation process of concrete structures, and is highly sensitive to the cracking. The velocity of ultrasonic pulses travelling in a solid material depends on the density and elastic properties of that material. Non-destructive testing namely, dynamic modulus of elasticity and ultrasonic pulse velocity was measured for high strength concrete incorporating cementitious composites. Results of dynamic modulus of elasticity and ultrasonic pulse velocity are reported and their relationships with compressive strength are presented. It has been found that NDT is reasonably good and reliable tool to measure the property of concrete which also gives the fair indication of the compressive strength development.

scholarly journals Ultrasonic Pulse Velocity—Compressive Strength Relationship for Portland Cement Mortars Cured at Different Conditions

Crystals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 133 ◽  
Author(s):  
Esteban Estévez ◽  
Domingo Alfonso Martín ◽  
Cristina Argiz ◽  
Miguel Ángel Sanjuán
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Internal Quality ◽  
Curing Conditions ◽  
Linear Relationships ◽  
Cement Mortars ◽  
Strength Relationship

The purpose of this paper is to establish some correlations between the main technical parameter with regard to the cement-based materials technology, the 28-day compressive strength, and ultrasonic pulse velocity of standard mortar samples cured at three different conditions—(i) under water at 22 °C; (ii) climatic chamber at 95% RH and 22 °C; (iii) lab ambient, 50% RH, and 22 °C—and after five curing periods of 1, 2, 7, 14, and 28 days. Good correlations for each curing conditions were obtained. All the positive linear relationships showed better R2 than exponential ones. These findings may promote the use of ultrasonic pulse velocity for the estimation of the 28-day compressive strength of standard Portland cement samples within the factory internal quality control.

scholarly journals Using Support Vector Machine to Improve Ultrasonic Pulse Velocity Test for Concrete

2018 ◽  
Vol 207 ◽  
pp. 01001
Author(s):  
Tu Quynh Loan Ngo ◽  
Yu-Ren Wang
Keyword(s):  
Compressive Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Support Vector ◽  
Non Destructive Testing ◽  
Testing Methods ◽  
Destructive Testing ◽  
Compressive Strength Of Concrete ◽  
Non Destructive

In the construction industry, to evaluate the compressive strength of concrete, destructive and non-destructive testing methods are used. Non-destructive testing methods are preferable due to the fact that those methods do not destroy concrete samples. However, they usually give larger percentage of error than using destructive tests. Among the non-destructive testing methods, the ultrasonic pulse velocity test is the popular one because it is economic and very simple in operation. Using the ultrasonic pulse velocity test gives 20% MAPE more than using destructive tests. This paper aims to improve the ultrasonic pulse velocity test results in estimating the compressive strength of concrete using the help of artificial intelligent. To establish a better prediction model for the ultrasonic pulse velocity test, data collected from 312 cylinder of concrete samples are used to develop and validate the model. The research results provide valuable information when using the ultrasonic pulse velocity tests to the inputs data in addition with support vector machine by learning algorithms, and the actual compressive strengths are set as the target output data to train the model. The results show that both MAPEs for the linear and nonlinear regression models are 11.17% and 17.66% respectively. The MAPE for the support vector machine models is 11.02%. These research results can provide valuable information when using the ultrasonic pulse velocity test to estimate the compressive strength of concrete.

Pulse Velocity Measurements in Fly Ash Blended Cementitious Systems Containing 43 Grade Cement

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
V. M. Sounthararajan ◽  
A. Sivakumar
Keyword(s):  
Fly Ash ◽  
Cost Savings ◽  
Ultrasonic Pulse Velocity ◽  
Cementitious Materials ◽  
Ultrasonic Pulse ◽  
Pozzolanic Reaction ◽  
Pulse Velocity ◽  
Supplementary Cementitious Materials ◽  
Pozzolanic Material ◽  
Cementitious Systems

Investigations on the different supplementary cementitious materials based on the hardening properties and the optimized dosage in cementitious systems find the right choice of pozzolanic material. It is essential to combine various additive/admixtures in concrete in proper proportions to maximize the benefits resulting in cost savings in construction. In the recent years, production technology and composition of hydraulic cements affect the setting and early age behavior of cementitious material. The addition of fly ash in cement is one viable technology to derive maximum benefits in terms of the economy and improved pozzolanic reaction. Ultrasonic pulse velocity testing is a feasible method for evaluating the hardening properties of cementitious materials. In this study, an attempt was made to derive the engineering basis for understanding the development of hardness during hydration of fly ash (FA) based cementitious systems. The tests conducted using pulse velocity technique proved to be an effective method for characterizing the early strength gain properties of different cementitious systems.

scholarly journals Factors influencing ultrasonic pulse velocity in concrete

2020 ◽  
Vol 13 (2) ◽  
pp. 222-247 ◽  
Author(s):  
J. P. GODINHO ◽  
T. F. DE SOUZA JÚNIOR ◽  
M. H. F. MEDEIROS ◽  
M. S. A SILVA
Keyword(s):  
Portland Cement ◽  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Hydrated Calcium Silicate ◽  
Degree Of Hydration ◽  
Mix Proportion ◽  
Non Destructive ◽  
Cylindrical Test

Abstract The hydration process of Portland cement triggers reactions of stabilization of minerals from the contact of the clinker with water, which is the Hydrated Calcium Silicate (C-S-H), the Etringite (3CaO.Al2O3.3CaSO4.32H2O) and the Portlandite (Ca(OH)2). In order to understand the effects of the evolution of hydration in cement, it is possible to apply non-destructive tests. In this context, the objective of this work is to evaluate the influence of the type of cement, the curing age, of the format and humidity of the test specimens of concrete in the ultrasonic pulse velocity (UPV). In order to do that, 36 cylindrical test specimens (10 x 20 cm) and 9 cubic ones with 25 cm of edges, with mix proportion of 1:2,7:3,2 (cement/sand/gravel), water/cement ratio of 0.58 and three types of Portland cement (CP II-Z-32, CP IV-32 RS and CP V-ARI) were molded. With data obtained it was possible to correlate the increase of concrete strength along time (at ages of 7, 14, 28, 70 and 91 days) with the increase of the ultrasonic pulse velocity. Besides, it was possible to prove the direct influence of the concrete moisture and of the degree of hydration in the UPV. The shape of the test specimen generally had no influence on the results, except in the case of cement CP V ARI.

Sign in / Sign up

Export Citation Format

Share Document