Preparation and Experimental Study of Graphite Material for Water Lubricated Thrust Bearing of Nuclear Main Pump

2018 ◽  
Vol 932 ◽  
pp. 102-106
Author(s):  
Jian Lei Wang ◽  
Chen Zhang ◽  
Yun Long Wang ◽  
Dong Ping Wang ◽  
Qian Jia ◽  
...  
Keyword(s):  
Experimental Study ◽  
Tribological Properties ◽  
Thrust Bearing ◽  
Property Testing ◽  
Wear Loss ◽  
Graphite Material ◽  
Test Platform ◽  
Different Types ◽  
Stop Test

Based on technical difficulties of graphite water-lubricated thrust bearing such as preparation and properties detection, this paper investigated graphite bearing systematically from preparation and property testing, three different types of graphite (#1, #2 and #3) were carried out. The result indicated the tribological properties are poor if the graphitization of graphite is too high or low. The pads of water-lubricated thrust bearing are manufactured by the three kinds of graphite, and the start-stop test were carried out on a test platform for half-size bearing of nuclear primary pump. The result of start-stop test were indicated the graphitization have a visible influence on the wear loss mass of graphite pad.

The influence of information relevance on the continued influence effect of misinformation

2020 ◽  
Author(s):  
Hua Jin ◽  
Lina Jia ◽  
Xiaojuan Yin ◽  
Shilin Wei ◽  
Guiping Xu
Keyword(s):  
Experimental Study ◽  
Questionnaire Survey ◽  
Personal Involvement ◽  
Influence Effect ◽  
Information Relevance ◽  
Different Types ◽  
Role Of Information

Misinformation often continues to influence people’s cognition even after corrected (the ‘continued influence effect of misinformation’, the CIEM). This study investigated the role of information relevance in the CIEM by questionnaire survey and experimental study. The results showed that information with higher relevance to the individuals had a larger CIEM, indicating a role of information relevance in the CIEM. Personal involvement might explain the effects of information relevance on the CIEM. This study provides insightful clues for reducing the CIEM in different types of misinformation and misinformation with varying relevance.

scholarly journals About the Acceptance of Wearing Face Masks in Times of a Pandemic

i-Perception ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 204166952110211
Author(s):  
Claus-Christian Carbon
Keyword(s):  
Experimental Study ◽  
Social Group ◽  
Social Norm ◽  
Face Mask ◽  
Negative Consequences ◽  
Different Types ◽  
Study Participants

Wearing face masks in times of COVID-19 is one of the essential keystones for effectively decreasing the rate of new infections and thus for mitigating the negative consequences for individuals as well as for society. Acceptance of wearing masks is still low in many countries, making it extremely difficult to keep the pandemic at bay. In an experimental study, participants ( N = 88) had to assess how strange they felt when wearing a face mask while being exposed to displays of groups of varying numbers of mask wearers. Three different types of face masks were shown: simple homemade masks, FFP2 masks, and loop scarfs. The higher the frequency of people wearing masks in the displayed social group, the less strange the participants felt about themselves, an essential precondition for accepting wearing masks. This effect of a descriptive social norm was particularly effective when people saw others wearing less intrusive masks, here, simple homemade masks.

Effects of ball properties on throwing in young team-handball beginners

2021 ◽  
pp. 174795412110236
Author(s):  
Frowin Fasold ◽  
Benjamin Noël ◽  
André Nicklas ◽  
Fabian Lukac ◽  
Stefanie Klatt
Keyword(s):  
Experimental Study ◽  
Movement Patterns ◽  
Team Handball ◽  
Throwing Accuracy ◽  
Different Types ◽  
Negative Effect ◽  
Study Participants

Throwing a ball is a primary skill in team-handball and can be directly influenced by the properties of different types of balls. Therefore, the use of different balls (i.e., methodic ball) recommended by the handball federations (e.g., IHF) and the education guidelines, are important in teaching throwing. Previous studies have shown that movement patterns and throwing velocity can be influenced by different ball types and sizes. However, the influence of these factors on throwing accuracy has not been investigated in detail yet. This study aims to replicate the findings of previous studies on increasing throwing velocity in children by comparing the use of a soft methodic ball with a size 0 handball. Furthermore, this study investigates the influence of these balls on throwing accuracy. In an experimental study, participants (10-years of age) threw a soft methodic ball and a size 0 ball at target areas in a handball goal. For all the throws, throwing velocity and accuracy were measured. Commensurate with previous research, throwing velocity was higher for the soft methodic ball compared to a size 0 ball. No difference was found in accuracy, although, it is worth mentioning that the participants were only experienced in throwing using the size 0 ball. Moreover, only one-third of the children favored throwing with a size 0 ball, which is what they are used to in training and competition. The results of our study, therefore, confirm that using soft methodic balls additionally, positively influences the throwing velocity and has no negative effect on the accuracy in throwing among young handball beginners.

scholarly journals Enhancement on the Tribological Properties of the Multilayer RGO/Al Matrix Composites by Cu-Coating Method

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3163
Author(s):  
Fengguo Liu ◽  
Ning Su ◽  
Renguo Guan
Keyword(s):  
Electron Microscope ◽  
Tribological Properties ◽  
Milled Powder ◽  
Wear Loss ◽  
Matrix Composites ◽  
Tem Analysis ◽  
Lubricating Film ◽  
Coating Method ◽  
Al Matrix Composites ◽  
Al Matrix

Multilayer reduced graphene oxide (mrGO) was chemically modified by electroless plating of copper on surface to form mrGO-Cu. The scanning electron microscope (SEM) and transmission electron microscope (TEM) analysis revealed that nano-Cu particles were uniformly dispersed on the surface of mrGO. The mrGO-Cu powders were further utilized as reinforcements for aluminum (Al) matrix and the mrGO-Cu/Al composite was successfully fabricated through clad rolling of milled powder. The tribological properties of the mrGO-Cu/Al composites were explored. The tribological results show that the mrGO-Cu could reduce the friction coefficient and wear loss of mrGO-Cu/Al composites, since the mrGO-Cu participated in lubricating processes due to the formation of a transfer layer on the contact surface. Furthermore, it is found that the composition of mrGO-Cu could significantly influence the tribological properties of the mrGO-Cu/Al composites. The composites with 4% of mrGO-Cu for composites exhibited the best tribological behavior, which transformed from adhesive wear to abrasive wear, due to the formation of a graphite lubricating film.

Experimental study on energy consumption and thermal environment of radiant ceiling heating system for different types of rooms

Energy ◽  
2021 ◽  
pp. 122555
Author(s):  
Wei Liao ◽  
Yimo Luo ◽  
Jinqing Peng ◽  
Dengjia Wang ◽  
Chenzhang Yuan ◽  
...  
Keyword(s):  
Experimental Study ◽  
Energy Consumption ◽  
Thermal Environment ◽  
Heating System ◽  
Different Types

scholarly journals Experimental study of cooling tower performance using ceramic tile packing

2013 ◽  
Vol 7 (1) ◽  
pp. 21-27 ◽  
Author(s):  
Ramkumar Ramkrishnan ◽  
Ragupathy Arumugam
Keyword(s):  
Experimental Study ◽  
Cooling Tower ◽  
Packing Material ◽  
Transfer Coefficients ◽  
Ceramic Tiles ◽  
Burnt Clay ◽  
Different Types ◽  
Roofing Material ◽  
Forced Draft

Deterioration of the packing material is a major problem in cooling towers. In this experimental study ceramic tiles were used as a packing material. The packing material is a long life burnt clay, which is normally used as a roofing material. It prevents a common problem of the cooling tower resulting from corrosion and water quality of the tower. In this study, we investigate the use of three different types of ceramic packings and evaluate their heat and mass transfer coefficients. A simple comparison of packing behaviour is performed with all three types of packing materials. The experimental study was conducted in a forced draft cooling tower. The variations in many variables, which affect the tower efficiency, are described.

scholarly journals Comparative Analysis of Capabilities of Different Types of Cone-Beam Tomography in an Experimental Study of Root Canals of Teeth Filled with High-Density Materials (part 2)

2021 ◽  
pp. 51-61
Author(s):  
A. Yu. Vasil'ev ◽  
V. V. Petrovskaya ◽  
E. A. Nichipor ◽  
V. G. Alpatova ◽  
N. N. Potrakhov ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Experimental Study ◽  
Cone Beam Computed Tomography ◽  
Comparative Assessment ◽  
High Density ◽  
Cone Beam ◽  
Root Canals ◽  
Different Types ◽  
Before And After ◽  
Cone Beam Tomography

During the course of this experimental study tomograms of extracted teeth were analyzed before and after filling the root canals with an endodontic material and fragments of broken metal instruments for root canal treatment. During the first stage of the experiment, untreated extracted teeth were scanned using conebeam computed tomography and microfocus cone-beam computed tomography. A comparative assessment of capabilities of the two methods of cone-beam computed tomography based on examination of untreated root canals was carried out. The second part of the study is dedicated to visualization of root canals that contain foreign high-density materials.

Sign in / Sign up

Export Citation Format

Share Document