scholarly journals Stress and Strain Modeling of Low Temperature Cofired Ceramic (LTCC) Seal Frame and Lid

2015 ◽  
Vol 2015 (CICMT) ◽  
pp. 000157-000163
Author(s):  
Daniel Krueger ◽  
John Porter ◽  
Ken Peterson

Low temperature cofired ceramic (LTCC) is established as an excellent packaging technology for high reliability, high density microelectronics. LTCC multichip modules (MCMs) comprising both ‘surface mount’ and ‘chip and wire’ technologies provide additional customization for performance. Long term robustness of the packages is impacted by the selection of seal frame and lid materials used to enclose the components inside distinct rooms in LTCC MCMs. An LTCC seal frame and lid combination has been developed that is capable of meeting the sealing and electromagnetic shielding requirements of MCMs. This work analyzes the stress and strain performance of various seal frame and lid materials, sealing materials, and configurations. The application for the MCM will impact selection of the seal frame, lid, and sealing materials based on this analysis.

2002 ◽  
pp. 101-110
Author(s):  
Masahiro OHTSUKA ◽  
Yukio ENYA ◽  
Torn KOBAYASHI ◽  
Atsushi KOIZUMI

2018 ◽  
Vol 2018 (1) ◽  
pp. 000466-000469 ◽  
Author(s):  
Daichi Okamoto ◽  
Yoko Shibasaki ◽  
Daisuke Shibata ◽  
Tadahiko Hanada

Abstract This paper presents an advanced ultra-thin photosensitive dielectric Film (PDM) newly developed with high resolution, low CTE and low residual stress for next-generation high-density redistribution layer (RDL), 2.5D interposer, and high-density fan-out package applications. For high-density RDL, photosensitive dielectric materials need to have low CTE to achieve high package reliability. The CTE of the material is 30–35ppm/K. While maintaining the low CTE, we successfully demonstrated the minimum micro-via diameter of 3um in the 5um thickness. Curing temperature of the PDM is 180°C × 60 min. which is lower than most of the advanced dielectric materials which currently used in industry. Low-temperature curing process results in low stress. We have calculated residual stress in the cured PDM from a test result of warpage measurement on 4 inch wafer. As another benefit of the PDM material in curing process, the PDM can be cured in air oven. Most of advanced photo dielectric materials need to cure in N2 oven due to prevent an oxidation of the material. We have demonstrated copper traces of 2um lines and spaced on the PDM by using semi-additive process (SAP) with sputtered Ti/Cu seed layer. Thanks to the low CTE and low residual stress due to the low-temperature curing, it passed temperature cycle test (1,000 cycles) with daisy chain structure which has 400 vias in the structure. It can be concluded that the newly developed PDM is a promising dielectric material for highly reliable high-density redistribution layer (RDL) for 2.5D interposers and fan-out wafer level package applications.


1993 ◽  
Vol 19 (12) ◽  
pp. 587-590 ◽  
Author(s):  
Egill L. Jacobsen ◽  
Louis G. Karras ◽  
Ellen A. BeGole ◽  
Jon C. Daniel

2019 ◽  
Vol 57 ◽  
pp. 143-151 ◽  
Author(s):  
L. M. Khmelnychyi ◽  
A. V. Loboda

In modern conditions of intensive dairy farming, the first and most important task was to ensure a high level of productivity of cows with simultaneous long-term use. Taking into account the important breeding aspect of the measure for intra-and interlinear breeding, it was considered appropriate to study the efficiency of combining the lines at the breeding of animals of the Sumy intra-breed type of Ukrainian Black-and-White diary breed by traits of longevity. The research on determining the effectiveness of combining the lines at breeding of cows on grounds of duration of use and lifetime productivity was carried out in the herd of pedigree plant PE "Burynske" of Pidlisnivskyi department in Sumy district. According to the results of evaluation of cows obtained by intrabreeding selection of eight genealogical formations of the experimental herd, was found significant effect of heredity lines on indicators of longevity. According to the estimation of longevity, the offspring of four lines were the best: Valiant, Sjuprim, Starbuck and O. Aivengo. Advantage of daughter progeny of sires Valiants line with the highest longevity over the animals of lines of Montfrech, Matt, M. Chiftein and S. T. Rokita on this basis amounted to 252–526 days (P < 0.01–0.001). The next by lifetime rating was the offspring of O. Aivengo's line sires had an advantage over cows of the above lines with variability of 220–393 days (P < 0.05–0.001). The same lines (Valianta, Sjuprim, Starbuck and Aivengo) almost did not differ among themselves by the number of used lactations (4.6–4.8) and exceeded cows of remaining lines by 0.6–1.4 lactation. The difference between the maximum and minimum values was reliable at P < 0.001. The highest yield for a productive life was obtained from cows belonging to the Aivengo line 1189870, which with a high reliability of difference predominated the offspring of all estimated lines with variability from 3532 (P < 0.001; Syuprim line) to 13617 kg of milk (P < 0.001; line Montfrech). High lifetime milk yields differed also descendants of sires lines Sjuprim (29684 kg), Starbuck (26811 kg) and M. Chiftein (26516 kg). Among the crossed variants with the minimum longevity indicators, offspring derived from bulls-sires of interlinear selection ♂Montfrech × ♀Mett and the reverse cross – (♂Mett × ♀Montfrech) are distinguished. This was explained to a certain extent by the fact that continuators of these lines were only crossbred sires of Ukrainian Black-and-White diary breed. In variants using the parent lines of Monfrech and Matt with maternal lines, the successors of which are Holstein sires, longevity indicators in the offspring obtained from these crosses are improving. According to the lifetime yield of dairy fat, the highest rates were obtained from offspring with interlinear selection of those sires who have the highest lifetime yield of milk. These daughters are from the crosses ♂Starbuck × ♀Sjuprim (1197.4 kg) and ♂S. T. Rokita × ♀Aivengo (1189.6 kg). An indicator of the effectiveness of longevity was also milk yield per day of life of dairy cows. Variability in interline selection varied from 8.7 (♂Metta × ♀Monfrech) to 12.0 kg (♂S. T. Rokita × ♀Aivengo). The difference between these variants was 3.3 kg with high reliability (P < 0.001; td = 5.95). Conclusions. Identified and confirmed statistical significance regularities concerning to influence the level of traits duration of use and lifetime productivity of an alternative selection system of linear breeding convinced about feasibility of regular monitoring to assess the combination of lines in the further breeding selection cows of Sumy intrabreed type of Ukrainian Black-and-White dairy cattle. Re-selection of the best options and rejection of ineffective ones will help to increase the genetic potential of longevity traits.


2000 ◽  
Vol 6 (S2) ◽  
pp. 592-593
Author(s):  
R. Migunova ◽  
B. Sandomirski ◽  
A. Kaprelyants

The cryopreservation is the method of selection of long-term skin preservation used for the closure of large wound defects and the only possibility of long preservation of graft skin material in the viable state. For the lowtemperature preservation of human skin was successfully used cryoprotectant Polyethylene oxide -400, which was confirmed by the clinical evaluation during autotransplantation /1/. At the same time many aspects of the influence of low temperatures on the ultrastructural skin components were unclear /2/. The investigation of subcellular elements during step of low-temperature preservation specifies mechanisms of influence on the tissue preservation factors and determine the condition of skin cellular elements /3,4,5/. The aim of this work is to study ultrastructural characteristics of human cadaverous skin during the stages of low-temperature preservation by PEO-400.In this investigation epidermal skin grafts with the thickness of 0.4-0.6 mm were studied in 6 hours after the accidental death divided in 3 series:


2014 ◽  
Vol 2013 (3) ◽  
pp. 53-66
Author(s):  
Skovikov Alexey

AbstractThe international practices takes into account the question of women's participation in the political life of modern Ukraine. The selection of the state was due to the dynamic process of democratic transformation - the separation of powers, the formation of multi-party competition among political actors in the electoral process, the activity women in the various institutions of civil society. The position was claimed on the basis of empirical data range of academic institutions and reputable sociological centers, and also interviews with experts who said that the creation of real conditions for self-realization by women's interest in politics is only possible for long term. The process is controversial and caused by political culture, traditions and interests of the ruling class represented mainly by men.


2020 ◽  
Author(s):  
Sam Verschooren ◽  
Yoav Kessler ◽  
Tobias Egner

An influential view of working memory (WM) holds that its’ contents are controlled by a selective gating mechanism that allows for relevant perceptual information to enter WM when opened, but shields WM contents from interference when closed. In support of this idea, prior studies using the reference-back paradigm have established behavioral costs for opening and closing the gate between perception and WM. WM also frequently requires input from long-term memory (LTM), but it is currently unknown whether a similar gate controls the selection of LTM representations into WM, and how WM gating of perceptual vs. LTM sources of information relate to each other. To address these key theoretical questions, we devised a novel version of the reference-back paradigm, where participants switched between gating perceptual and LTM information into WM. We observed clear evidence for gate opening and closing costs in both cases. Moreover, the pattern of costs associated with gating and source-switching indicated that perceptual and LTM information is gated into WM via a single gate, and rely on a shared source-selection mechanism. These findings extend current models of WM gating to encompass LTM information, and outline a new functional WM architecture.


Sign in / Sign up

Export Citation Format

Share Document