scholarly journals Spectrophotometric techniques for the characterization of strains involved in the blue pigmentation of food: Preliminary results

2018 ◽  
Vol 7 (1) ◽  
Author(s):  
Luca Fasolato ◽  
Nadia Andrea Andreani ◽  
Roberta De Nardi ◽  
Giulia Nalotto ◽  
Lorenzo Serva ◽  
...  
Keyword(s):  
Near Infrared ◽  
Spectral Characteristics ◽  
Small Ring ◽  
Bacterial Cells ◽  
Visible Spectroscopy ◽  
Whole Cells ◽  
Additional Information ◽  
Extracellular Products ◽  
Blue Discoloration

Near infrared spectroscopy (NIRs) and ultraviolet visible spectroscopy (UV-vis) have been investigated as rapid techniques to characterize foodborne bacteria through the analysis of the spectra of whole cells or microbial suspensions. The use of spectra collected from broth cultures could be used as a fingerprint for strain classification using a combined polyphasic approach. The aim of this study was to evaluate the feasibility of NIRs and UV-vis for the characterization of blue strains belonging to the Pseudomonas fluorescens group. The bacteria were isolated from different food matrices, including some spoiled samples (blue discoloration). Eightyone strains previously identified at the species level were grown in Minimal Bacterial Medium broth under standard conditions at 22°C. Two biological replicates were centrifuged in order to separate the bacterial cells from the extracellular products. Six aliquots per strain were analyzed on a small ring cup in transflectance mode (680-2500 nm, gap 2 nm). A subset of 39 strains was evaluated by UV-vis to determine changes in the spectral characteristics at 48 and 72 hours. Several chemometric approaches were tested to assess the performance of NIRs and UVvis. According to the variable importance in projection (VIP), the 1892-2020 nm spectral region showed the highest level of discrimination between blue strains and others. Additional information was provided in the 680-886 and 1454-1768 nm regions (aromatic C-H bonds) and in the 2036-2134 nm region (fatty acids). Changes in UV-vis spectral data (at 48 and 72 hours) appear to indicate the presence of phenazine and catecholic compounds in extracellular products.

Non Destructive Characterization of Wooden Members Using near Infrared Spectroscopy

2013 ◽  
Vol 778 ◽  
pp. 328-334 ◽  
Author(s):  
Anna Sandak ◽  
Mariapaola Riggio ◽  
Jakub Sandak
Keyword(s):  
Near Infrared ◽  
Species Recognition ◽  
Nir Spectroscopy ◽  
Visual Assessment ◽  
Additional Information ◽  
Drilling Resistance ◽  
Non Destructive ◽  
Non Destructive Characterization ◽  
Routine Assessment

On site characterization of wood members is a very challenging task, after considering all the variables affecting the whole structure itself and material used for construction. The up-to-data procedures are limited to few characterizations, and in general based on visual assessment supported by local drilling resistance analysis, stress-wave time of flight measurement and/or moisture content estimation. The goal of this work was to promote near infrared (NIR) spectroscopy as a supplementary tool providing additional information for the expert assessing timber structures. The paper presents several examples of successful NIR application in species recognition, physical properties prediction, evaluation of wood weathering and/or fungal degradation level. However, it must be stated that implementation of NIR in routine assessment protocols requires prior preparation of a dedicated databases of high precision reference values to build reliable, flexible and sufficiently generalized models.

Highly Fluorescent Au25-xAgx Nanoclusters Protected with Poly(ethylene glycol) - and Zwitterion-Modified Thiolate Ligands

2018 ◽  
Author(s):  
Dinesh Mishra ◽  
Sisi Wang ◽  
Zhicheng Jin ◽  
Eric Lochner ◽  
Hedi Mattoussi
Keyword(s):  
Quantum Yield ◽  
Near Infrared ◽  
Small Diameter ◽  
Binding Energies ◽  
Thiolate Ligands ◽  
Nir Emission ◽  
Thiolate Complexes ◽  
Long Lifetime ◽  
Poly Ethylene

<p>We describe the growth and characterization of highly fluorescing, near-infrared-emitting nanoclusters made of bimetallic Au<sub>25-x</sub>Ag<sub>x</sub> cores, prepared using various monothiol-appended hydrophobic and hydrophilic ligands. The reaction uses well-defined triphenylphosphine-protected Au<sub>11</sub> clusters (as precursors), which are reacted with Ag(I)-thiolate complexes. The prepared nanoclusters are small (diameter < 2nm, as characterized by TEM) with emission peak at 760 nm and long lifetime (~12 µs). The quantum yield measured for these materials was 0.3 - 0.4 depending on the ligand. XPS measurements show the presence of both metal atoms in the core, with measured binding energies that agree with reported values for nanocluster materials. The NIR emission combined with high quantum yield, small size and ease of surface functionalization afforded by the coating, make these materials suitable to implement investigations that address fundamental questions and potentially useful for biological sensing and imaging applications.<br></p>

Treatment system response to transient AOX (adsorbable organic halogen) loadings

1997 ◽  
Vol 35 (2-3) ◽  
pp. 85-91
Author(s):  
D. A. Barton ◽  
J. D. Woodruff ◽  
T. M. Bousquet ◽  
A. M. Parrish
Keyword(s):  
Paper Industry ◽  
Model Development ◽  
Operating Conditions ◽  
System Response ◽  
Additional Information ◽  
Organic Halogen ◽  
Aox Removal ◽  
Variable Operating Conditions ◽  
Plant Shutdown

If promulgated as proposed, effluent guidelines for the U.S. pulp and paper industry will impose average monthly and maximum daily numerical limits of discharged AOX (adsorbable organic halogen). At this time, it is unclear whether the maximum-day variability factor used to establish the proposed effluent guidelines will provide sufficient margin for mills to achieve compliance during periods of normal but variable operating conditions within the pulping and bleaching processes. Consequently, additional information is needed to relate transient AOX loadings with final AOX discharges. This paper presents a simplistic dynamic model of AOX decay during treatment. The model consists of hydraulic characterization of an activated sludge process and a first-order decay coefficient for AOX removal. Data for model development were acquired by frequent collection of influent and effluent samples at a bleach kraft mill during a bleach plant shutdown and startup sequence.

scholarly journals Synthesis and Characterization of a Bioconjugate Based on Oleic Acid and L-Cysteine

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1791
Author(s):  
Marco Vizcarra-Pacheco ◽  
María Ley-Flores ◽  
Ana Mizrahim Matrecitos-Burruel ◽  
Ricardo López-Esparza ◽  
Daniel Fernández-Quiroz ◽  
...  
Keyword(s):  
Oleic Acid ◽  
Materials Science ◽  
Critical Micellar Concentration ◽  
Synthesis And Characterization ◽  
New Materials ◽  
Visible Spectroscopy ◽  
Amide Bonds ◽  
Transmission Electron ◽  
Self Assembled

One of the main challenges facing materials science today is the synthesis of new biodegradable and biocompatible materials capable of improving existing ones. This work focused on the synthesis of new biomaterials from the bioconjugation of oleic acid with L-cysteine using carbodiimide. The resulting reaction leads to amide bonds between the carboxylic acid of oleic acid and the primary amine of L-cysteine. The formation of the bioconjugate was corroborated by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and nuclear magnetic resonance (NMR). In these techniques, the development of new materials with marked differences with the precursors was confirmed. Furthermore, NMR has elucidated a surfactant structure, with a hydrophilic part and a hydrophobic section. Ultraviolet-visible spectroscopy (UV-Vis) was used to determine the critical micellar concentration (CMC) of the bioconjugate. Subsequently, light diffraction (DLS) was used to analyze the size of the resulting self-assembled structures. Finally, transmission electron microscopy (TEM) was obtained, where the shape and size of the self-assembled structures were appreciated.

scholarly journals Zinc Oxide and Silver Nanoparticle Effects on Intestinal Bacteria

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2489
Author(s):  
Ami Yoo ◽  
Mengshi Lin ◽  
Azlin Mustapha
Keyword(s):  
Electron Microscopy ◽  
Zinc Oxide ◽  
Morphological Changes ◽  
Intestinal Bacteria ◽  
Bacterial Cells ◽  
Ag Nps ◽  
Zno Nps ◽  
Bifidobacterium Animalis ◽  
Transmission Electron

The application of nanoparticles (NPs) for food safety is increasingly being explored. Zinc oxide (ZnO) and silver (Ag) NPs are inorganic chemicals with antimicrobial and bioactive characteristics and have been widely used in the food industry. However, not much is known about the behavior of these NPs upon ingestion and whether they inhibit natural gut microflora. The objective of this study was to investigate the effects of ZnO and Ag NPs on the intestinal bacteria, namely Escherichia coli, Lactobacillus acidophilus, and Bifidobacterium animalis. Cells were inoculated into tryptic soy broth or Lactobacilli MRS broth containing 1% of NP-free solution, 0, 12, 16, 20 mM of ZnO NPs or 0, 1.8, 2.7, 4.6 mM Ag NPs, and incubated at 37 °C for 24 h. The presence and characterization of the NPs on bacterial cells were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). Membrane leakage and cell viability were assessed using a UV-visible spectrophotometer and confocal electron microscope, respectively. Numbers of treated cells were within 1 log CFU/mL less than those of the controls for up to 12 h of incubation. Cellular morphological changes were observed, but many cells remained in normal shapes. Only a small amount of internal cellular contents was leaked due to the NP treatments, and more live than dead cells were observed after exposure to the NPs. Based on these results, we conclude that ZnO and Ag NPs have mild inhibitory effects on intestinal bacteria.

Optical Absorption Spectroscopy of DNA-Wrapped HiPco Carbon Nanotubes

2019 ◽  
Vol 943 ◽  
pp. 95-99
Author(s):  
Li Jun Wang ◽  
Kazuo Umemura
Keyword(s):  
Carbon Nanotubes ◽  
Aqueous Solution ◽  
Optical Absorption ◽  
Absorption Spectroscopy ◽  
Near Infrared ◽  
Nir Spectroscopy ◽  
Optical Characterization ◽  
Optical Absorption Spectroscopy ◽  
Double Stranded Dna

Optical absorption spectroscopy provides evidence for individually dispersed carbon nanotubes. A common method to disperse SWCNTs into aqueous solution is to sonicate the mixture in the presence of a double-stranded DNA (dsDNA). In this paper, optical characterization of dsDNA-wrapped HiPco carbon nanotubes (dsDNA-SWCNT) was carried out using near infrared (NIR) spectroscopy and photoluminescence (PL) experiments. The findings suggest that SWCNT dispersion is very good in the environment of DNA existing. Additionally, its dispersion depends on dsDNA concentration.

Sign in / Sign up

Export Citation Format

Share Document