A STUDY OF THE MINERALOGICAL COMPOSITION OF SAND IN SOUTHERN ONTARIO

1959 ◽  
Vol 39 (2) ◽  
pp. 185-196 ◽  
Author(s):  
Carol I. Dell
Keyword(s):  
Mineralogical Composition ◽  
Fine Sand ◽  
Coarse Sand ◽  
Heavy Minerals ◽  
Plant Nutrient ◽  
Coarse Silt ◽  
Medium Sand ◽  
Sand Fraction ◽  
Southern Ontario ◽  
Mineralogical Study

A mineralogical study of the fine sand fraction of unweathered tills and stratified sands chosen to represent the deposits of the major ice lobes of southern Ontario was carried out. In addition, a few analyses were made of the coarse silt and coarser sands.In general there was the same variety of minerals in all samples and they varied only in their proportions. Tills overlying Palaeozoic bedrock contained abundant carbonates and shale fragments constituting up to 70 per cent of some fine sands. In the coarse sands, carbonates and shale increased sharply. In the coarse silt and fine sand, feldspars were more abundant than quartz whereas in the medium and coarse sand the reverse was true. Quartz increased in quantity with increasing grain size and reached a maximum in the medium sand. Heavy minerals usually constituted less than 15 per cent of the fine sand. Some of the minerals present in the coarse silt and fine sand were not found in the coarser sands. Usually the order of abundance of the heavy minerals was: hornblende, garnet, micas, magnetite, pyroxenes and sphene. Epidote, rutile, apatite, tourmaline, staurolite, kyanite and others were also noted. A chart listing the plant nutrient elements found in these minerals was prepared.

MINERALOGICAL COMPOSITION OF SOME GREY WOODED SOILS DEVELOPED FROM GLACIAL TILL

1961 ◽  
Vol 41 (2) ◽  
pp. 228-240 ◽  
Author(s):  
S. Pawluk
Keyword(s):  
Mineralogical Composition ◽  
Fine Sand ◽  
Mineral Weathering ◽  
Glacial Till ◽  
Sand Fraction ◽  
Mineral Fraction ◽  
Layer Structures ◽  
Mineralogical Study ◽  
Similar Materials ◽  
Exchange Acidity

Grey Wooded profiles representing five soil series developed on glacial till in Alberta were studied. The clay mineral fraction in these soils was found to contain montmorillonite, illite, kaolinite and quartz. Authigenic chlorite and "mixed layer" structures were present in the soil sola. Examination of the fine sand fraction revealed the presence of quartz, potash-feldspars and soda-calcic feldspars in the light (sp. gr. < 2.70) mineral fraction with biotite, muscovite, chlorite and highly weathered amphiboles and pyroxenes comprising the intermediate (sp. gr. 2.70–2.96) mineral fraction. The heavy (sp. gr. > 2.96) mineral fraction contained primarily iron oxides, amphiboles, garnets and pyroxenes with a wide variety of other minerals in relatively low quantities.The mineralogical data presented suggest variations in weathering in the sola of the soils studied, despite their similar morphological features. Active and exchange acidity showed little relationship to the degree of mineral weathering. Weathering appeared to be more severe in horizons where acid conditions result from the presence of exchangeable hydrogen rather than where similar acid conditions result from exchangeable aluminium. The mineralogical study was found to be exceedingly valuable in distinguishing between morphologically similar materials of different lithology.

scholarly journals Etude Mineralogique Des Fractions Sableuse Et Argileuse Du Remplissage Du Gisement De Montgaudier, Charente, France

2017 ◽  
Vol 13 (15) ◽  
pp. 195
Author(s):  
Boukhir Mohammed ◽  
Chaouni Abdel-Ali ◽  
Lahrach Abderrahim
Keyword(s):  
Mineralogical Composition ◽  
Surrounding Rock ◽  
The Other ◽  
Heavy Minerals ◽  
Sand Fraction ◽  
Mineralogical Study ◽  
Mineralogical Investigation ◽  
Opaque Minerals ◽  
Quartz Grains ◽  
Different Parts

The mineralogical investigation of sand fraction of different sectors of filling of Montgaudier deposit revealed that heavy minerals are mainly composed of amphiboles and disthene in all analyzed samples. The other mineralogical species encountered appear having only a secondary role in the composition of heavy mineral processions. These minerals are: Andalusite, brookite, chlorite, epidote, garnet, pyroxene, rutile, sillimanite and sphene. The opaque minerals are relatively numerous in all the studied samples which they are in different stages of alteration, associated with other minerals presenting a fresh appearance. The light minerals consist mainly of hyaline or translucent quartz grains and milky or opalescent grains. The study of clay minerals generally showed a predominance of kaolinite in all sectors, followed by illite and chlorite. Smectite comes in only fourth place. This cortege is complemented by interstratified smectite-chlorite, which are very poorly represented. The mineralogical study of the deposits at the different parts of the layers filling of the Montgaudier deposit and the sediments in the immediate vicinity permitted to determine the origin of these deposits. Their procession is largely influenced by the geological nature of the Tardoire watershed but also of the mineralogical composition of the surrounding rock in which this cave was.

The mineralogical composition of some Scottish soils

1925 ◽  
Vol 15 (3) ◽  
pp. 257-271 ◽  
Author(s):  
James Hendrick ◽  
George Newlands
Keyword(s):  
Mineralogical Composition ◽  
Fine Sand ◽  
Plant Food ◽  
Sand Fraction ◽  
Extensive Survey ◽  
North East ◽  
The North ◽  
Local Origin ◽  
East West ◽  
Made In

1. Previous investigations showed that certain Scottish soils were of glacial drift origin, that they were comparatively rich in unweathered silicates and therefore in reserves of plant-food, that they showed considerable variation in such silicates and were capable of classification accordingly. Some indication was also shown that the glacial drift, and hence the resulting soil, was sometimes of local origin, its character being determined by the underlying rock. In the present investigation a more extensive survey of Scottish soils has been made in order to discover to what extent these preliminary findings might be applicable generally.2. For this purpose soils have been collected from various localities in the north, north-east, west and south of Scotland, and have been analysed mechanically and the “fine sand” fraction examined mineralogically.

Studies in the geology and mineralogy of soils: II. Soils of South-East Scotland

1929 ◽  
Vol 19 (4) ◽  
pp. 802-813 ◽  
Author(s):  
R. Hart
Keyword(s):  
Mineral Content ◽  
Mineralogical Composition ◽  
Fine Sand ◽  
Parent Material ◽  
The South ◽  
Sand Fraction ◽  
Silicate Minerals ◽  
Fresh State ◽  
The Matrix

(1) The mineralogical composition of the fine sand fraction of certain soils from the south-east of Scotland is described.(2) The soils are shown to possess a fairly high content of silicate minerals in a comparatively fresh state.(3) The distribution and amount of potash, phosphate and lime-bearing minerals in the soils is discussed.(4) The soils can be grouped according to their mineral content and this grouping is found to depend on the geology of the parent material.(5) All the soils are formed on glacial drift and the results suggest that the local rocks have a preponderating influence on the composition of the matrix of the drift.

scholarly journals Compositional and industrial assessment of Isua-Akoko, Akure, Ayadi and Lafe (Ode Aye) clay deposits of Ondo state, Nigeria

1970 ◽  
Vol 21 (1) ◽  
pp. 41-49
Author(s):  
O Adegbuyi ◽  
GP Ojo ◽  
AJ Adeola ◽  
MT Alebiosu
Keyword(s):  
Chemical Properties ◽  
Fine Sand ◽  
Coarse Sand ◽  
Grain Size Analysis ◽  
Size Analysis ◽  
Medium Sand ◽  
Southwestern Nigeria ◽  
Firing Test ◽  
Clay Deposits ◽  
Ondo State

The physical and chemical properties of clay deposits around Isua-Akoko, Akure, Lafe and Ayadi in Ondo State southwestern Nigeria have been examined. The results have shown that Isua-Akoko, Akure and Lafe Clays are plastic fire clays while Ayadi clay is kaolinite. Grain size analysis reveals that Isua Akoko Clay contains 45% of clay, 18% silt, 12% fine sand,14% medium sand and 11% coarse sand and no gravel; Akure clay contains 42% clay, 14% silt, 13% fine sand, 20% medium sand and 8% coarse sand with 1% gravel. Lafe Clay contains 21% clay, 8% silt, 25% fine sand, 37% medium sand and 8% coarse sand with 1% gravel while Ayadi clay contains 83% clay and 17% silt. The liquid limits of these clay samples range from 41% to 73%% and plastic limits range from 18% to 26% respectively. The chemical analysis reveals that the most abundant mineral is silica (60.97%) and aluminum was next in abundance (23.69%) while other oxides are low. The results show that Isua-Akoko and Akure are residual while Lafe and Ayadi are sedimentary and transported Clays. The firing test, PH, and bleaching tests of the clays are also discussed. The chemical and physical characteristics of the clay deposits are strongly indicative of their industrial importance in the production of ceramics, refractories, paving bricks, paint and pharmaceutical products.KEYWORDS: Kaolinite, fire clay, gravel, ceramics and alumina.

scholarly journals Dust Particle Size and Statistical Parameters

2021 ◽  
pp. 57-93
Author(s):  
Noor Al-Dousari ◽  
Modi Ahmed ◽  
Ali Al-Dousari ◽  
Musaad Al-Daihani ◽  
Murahib Al-Elaj
Keyword(s):  
Particle Size ◽  
Grain Size ◽  
Size Distribution ◽  
Fine Sand ◽  
Coarse Sand ◽  
Optical Methods ◽  
Size Analysis ◽  
Coarse Silt ◽  
Statistical Parameters ◽  
Fine Silt

AbstractGrain ‘size’ can be specified and measured in several different ways. All methods of grain size determination have blemishes, and the choice of the most appropriate method is governed by the nature of the sample and the use to which the data are placed. Four main methods are currently used for size analysis of sands: (a) sieving; (b) settling tube analysis; (c) electro-optical methods, including Coulter Counter analysis and laser granulometry; and (d) computerized image analysis. The classification of the particle size distribution of Kuwait dust was mapped according to the parameters proposed by Folk And Ward (1957) which were widely used for quantitative comparisons between natural grain size distribution and the lognormal distribution that shows better sorted sediments have lower values of σ1. Maps of the distribution of dust in Kuwait were obtained that included: fine sand (F.S.), Coarse sand (C.S), Medium Sand (M.S), Very Fine Sane (V.F.S), Very Coarse Silt (V.C.Silt), Coarse Silt (C.Silt), Medium Silt (M.Silt), Fine Silt (F.Silt), Very Fine Silt (V.F.Silt), in addition to that, the deposition percentage of Clay, Sand, mud (silt plus clay) and silt were provided.

scholarly journals Sediment Characterization and Monsoonal Impact on Beach Morphology at the Three Beaches along the Karachi Coast, Pakistan

2021 ◽  
Vol 12 (1) ◽  
pp. 8185
Author(s):  
Sumera Farooq ◽  
Nazia Arshad
Keyword(s):  
Monsoon Season ◽  
High Tide ◽  
Fine Sand ◽  
Coarse Sand ◽  
Sediment Characteristics ◽  
Sand Fraction ◽  
South West ◽  
South West Monsoon ◽  
Tide Level ◽  
West Monsoon

Sediment characteristics plays important role in the determination and functioning of coastal ecosystems. The present study is an attempt to evaluate the variability in sediment characteristics of the three beaches: Clifton, Sandspit and Buleji, at the Karachi coast. The samples were collected during pre-monsoon and south-west monsoon seasons to evaluate the seasonal differences. The sediments of the three sites showed variations in moisture content, organic matter and grain size. The highest mean moisture (27.17%) and organic contents (3.5 %) were recorded from the sediments of Clifton. The maximum fraction of sediments (> 80 %) consist of fine to very fine sand at all studied sites. The sediments of Clifton were high in very fine sand fraction and low in coarse sand fraction as compared to Sandspit and Buleji. The sediments of all the three studied sites are moderately sorted, negatively coarse-skewed and showed leptokurtic distribution. The studied beaches of Clifton, Sandspit and Buleji shows dissimilarity in sediment characteristics as indicated through Cluster and PCA analysis. The monsoonal influence on sediment characteristics was also observed at all the three studied beaches. The strong wave action during SW monsoon season results in the deposition of the coarser sediments at the high tide level thus increasing the steepness of the beaches.

Characterization of the angle of repose of binary granular materials

2005 ◽  
Vol 42 (2) ◽  
pp. 683-692 ◽  
Author(s):  
Zamri Chik ◽  
Luis E Vallejo
Keyword(s):  
Granular Material ◽  
Average Diameter ◽  
Fine Sand ◽  
Friction Angle ◽  
Lateral Spreading ◽  
Coarse Sand ◽  
Angle Of Repose ◽  
Sand Fraction ◽  
Angle Of Internal Friction ◽  
Modes Of Failure

When a heap or pile of granular material accumulates at the toe of a failed slope, the pile rests at its angle of repose. The gradual build up of a heap of soil in the laboratory simulates the formation of the heap at the toe of a slope. In this study, the angle of repose developed by binary granular mixtures of coarse sand (1.16 mm in average diameter) and fine sand (0.10 mm in average diameter) was measured in the laboratory. The influence on the angle of repose by the roughness of the base on which the mixtures were placed was also investigated. When the mixtures were placed on a rough surface, the heap developed its angle of repose by two different modes of failure. When the mixtures were controlled by the coarse sand fraction, failure took place on a layer located at the free surface of the heap. When the fine sand fraction controlled the composition of the mixture, the heap developed its angle of repose after the material failed by lateral spreading. When the mixture was placed on a smooth surface, the heap developed its angle of repose by a single mode of failure, namely lateral spreading at the interface of the mixture and the smooth base. A theoretical analysis relating the angle of repose, the internal angle friction of the mixtures, and the interface basal friction angle is also presented.Key words: angle of repose, binary granular material, quartz sand, angle of internal friction, interface friction angle, Rankine earth pressure theory.

scholarly journals Major Characteristics of Surface Sediments Within the Shallow Water of the Cat Ba Island, North Vietnam

2020 ◽  
Vol 36 (4) ◽  
Author(s):  
Nguyen Huy Hoang ◽  
Bui Van Vuong ◽  
Evgenii Egidarev ◽  
Vasiliy Zharikov ◽  
Le Anh Xuan ◽  
...  
Keyword(s):  
Mineral Composition ◽  
Surface Sediments ◽  
Ph Value ◽  
Fine Sand ◽  
Coarse Sand ◽  
Coarse Silt ◽  
Terrigenous Sediment ◽  
Fine Grained ◽  
Reducing Environment ◽  
North Vietnam

The Cat Ba is one of the largest Islands offshore North Vietnam, which is characterized by an abundance of coral reefs in the East and Southeast of the island. The surface sediments are considered the basic elements for the coral ecosystem development. In this study, the authors present some new results studying pH, Eh, mineral composition, and grain size as the basic information for environmental assessment of this area. The results show that the pH value of the surface sediment varies from 6.90 to 8.09, with an average of 7.24 while the Eh value of the sediment ranges from -121.10 to -48.20mV,  an average of -68.39mV, demonstrating a reducing environment. The surface sediments have been classified into 8 size classes: the coarse silt > very coarse silt > medium sand, very fine sand > very coarse sand, fine sand > coarse sand, very fine gravel. Most of the sediments are poorly sorted - very poorly sorted, only a few sedimentary samples are well sorted, moderately sorted, and moderately well sorted. The average mineral composition of the surface sediments consists of: 25% quartz, 17% illite, 16% aragonite, 13% kaolinite, 10% calcite, 5% chlorite, 4% gothite, 3% halite, 2% feldspar and less montmorillonite, and dolomite. These results allowed the researcher to interpret that the sediments have been deposited in a relatively calm environment and the terrigenous sediment sources are dominant over the marine sources. Source marine sediment groups are characterized by coarse grains, high pH, and are rich in carbonate minerals, which have been produced by biological materials. In contrast, the terrigenous sediment group is dominated by fine-grained sediments, rich clay minerals, quartz, and gothite. These fine-grained sediments are commonly distributed in the area and are favorable places for pollutant accumulation.  

scholarly journals CHARACTERISTIC OF LITORAL SEDIMENT ON SINDULANG SATU COASTAL

2013 ◽  
Vol 1 (1) ◽  
pp. 48
Author(s):  
Junet I. S. Korwa ◽  
Esry T. Opa ◽  
Rignolda Djamaludin
Keyword(s):  
Coastal Area ◽  
Littoral Zone ◽  
Sea Water ◽  
Fine Sand ◽  
Coarse Sand ◽  
Water Infiltration ◽  
Physical Change ◽  
Medium Sand ◽  
Special Concern ◽  
Sand Material

Coastal area is defined as the interface point where sea and land meet. To the land the area is limited to the area influenced by the sea factors (wind, tide, and sea water infiltration), while to the sea is limited to the area influenced by the land factors. Special concern need to be addressed in regarding to the use of coastal area. As part of the coastal area, littoral zone is very dynamics due to factors of oceanography and human activities. The same fact is experienced by the littoral zone in Sindulang Satu. Physical change has been the fact in this littoral zone.  In relation to the change, it is considered of importance to describe and analysis the characteristics of the sediment and related oceanography factors.  Result of observation indicated that sediment in the littoral zone consist of fine sand, medium sand, very fine sand, coarse sand and pebbles. Silt and boulder were also found. Distribution of sediment granulometry showed that the littoral zone was dominated by fine sand material, bad sorted, asymetrical to small size and symmetrical granulometry, and mesokurtic. Tidal current is the type of current working in the littoral zone and it plays importance role in the sediment.

Sign in / Sign up

Export Citation Format

Share Document