scholarly journals Volume, Side-Area, and Force Direction of Berkovich and Cubecorner Indenters, Novel Important Insights

2021 ◽  
Vol 11 (11) ◽  
pp. 212-241
Author(s):  
Gerd Kaupp
Keyword(s):  
Force Direction

The Influence of Force Direction on the Fracture Pattern and Fracture Resistance of Canine Teeth in Dogs

2017 ◽  
Vol 34 (1) ◽  
pp. 8-17 ◽  
Author(s):  
Stephanie Goldschmidt ◽  
Catherine Zimmerman ◽  
Caitlyn Collins ◽  
Scott Hetzel ◽  
Heidi-Lynn Ploeg ◽  
...  
Keyword(s):  
Fracture Resistance ◽  
Ex Vivo ◽  
Testing Machine ◽  
Fracture Pattern ◽  
Hard Tissue ◽  
Canine Tooth ◽  
Cross Sectional ◽  
Significant Difference ◽  
Force Direction ◽  
Testing Group

Biomechanical studies of the elongated canine tooth of animals are few, and thus our understanding of mechanical and physical properties of animal teeth is limited. The objective of the present study was to evaluate the influence of force direction on fracture resistance and fracture pattern of canine teeth in an ex vivo dog cadaver model. Forty-five extracted canine teeth from laboratory beagle dogs were standardized by hard tissue volume and randomly distributed among 3 force direction groups. The teeth were secured within a universal testing machine and a load was applied at different directions based on testing group. The maximum force to fracture and the fracture pattern classification were recorded for each tooth. After correcting for hard tissue cross-sectional area in a multivariate analysis, no significant difference in the amount of force required for fracture was apparent between the different force direction groups. However, the influence of force direction on fracture pattern was significant. The results of this study may allow the clinician to educate clients on possible causal force directions in clinically fractured teeth and, thus, help prevent any contributing behavior in the future.

scholarly journals Plasmonic linear nanomotor using lateral optical forces

2020 ◽  
Vol 6 (45) ◽  
pp. eabc3726
Author(s):  
Yoshito Y. Tanaka ◽  
Pablo Albella ◽  
Mohsen Rahmani ◽  
Vincenzo Giannini ◽  
Stefan A. Maier ◽  
...  
Keyword(s):  
Laser Beam ◽  
Incident Light ◽  
Lateral Force ◽  
Diffraction Limit ◽  
Propagation Direction ◽  
Optical Force ◽  
Optical Forces ◽  
Incident Laser ◽  
New Class ◽  
Force Direction

Optical force is a powerful tool to actuate micromachines. Conventional approaches often require focusing and steering an incident laser beam, resulting in a bottleneck for the integration of the optically actuated machines. Here, we propose a linear nanomotor based on a plasmonic particle that generates, even when illuminated with a plane wave, a lateral optical force due to its directional side scattering. This force direction is determined by the orientation of the nanoparticle rather than a field gradient or propagation direction of the incident light. We demonstrate the arrangements of the particles allow controlling the lateral force distributions with the resolution beyond the diffraction limit, which can produce movements, as designed, of microobjects in which they are embedded without shaping and steering the laser beam. Our nanomotor to engineer the experienced force can open the door to a new class of micro/nanomechanical devices that can be entirely operated by light.

scholarly journals Tactile Interaction Sensor with Millimeter Sensing Acuity

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4274
Author(s):  
Eunsuk Choi ◽  
Sunjin Kim ◽  
Jinsil Gong ◽  
Hyeonjeong Sun ◽  
Minjin Kwon ◽  
...  
Keyword(s):  
Shear Force ◽  
High Reliability ◽  
Normal Pressure ◽  
Low Noise ◽  
Sensing Material ◽  
High Uniformity ◽  
Tactile Interaction ◽  
Force Direction ◽  
Potential Applications ◽  
Contact Shape

In this article we report on a 3 × 3 mm tactile interaction sensor that is able to simultaneously detect pressure level, pressure distribution, and shear force direction. The sensor consists of multiple mechanical switches under a conducting diaphragm. An external stimulus is measured by the deflection of the diaphragm and the arrangement of mechanical switches, resulting in low noise, high reliability, and high uniformity. Our sensor is able to detect tactile forces as small as ~50 mgf along with the direction of the shear force. It also distinguishes whether there is a normal pressure during slip motion. We also succeed in detecting the contact shape and the contact motion, demonstrating potential applications in robotics and remote input interfaces. Since our sensor has a simple structure and its function depends only on sensor dimensions, not on an active sensing material, in comparison with previous tactile sensors, our sensor shows high uniformity and reliability for an array-type integration.

scholarly journals The extent of altered digit force direction correlates with clinical upper extremity impairment in chronic stroke survivors

2015 ◽  
Vol 48 (2) ◽  
pp. 383-387 ◽  
Author(s):  
Na Jin Seo ◽  
Leah R. Enders ◽  
Binal Motawar ◽  
Marcella L. Kosmopoulos ◽  
Mojtaba Fathi-Firoozabad
Keyword(s):  
Upper Extremity ◽  
Chronic Stroke ◽  
Stroke Survivors ◽  
Force Direction ◽  
Upper Extremity Impairment

A Comparative Study of the Formulations for Topology Optimization of Compliant Mechanisms

2008 ◽  
Author(s):  
Sangamesh R. Deepak ◽  
M. Dinesh ◽  
Deepak Sahu ◽  
Salil Jalan ◽  
G. K. Ananthasuresh
Keyword(s):  
Topology Optimization ◽  
Comparative Study ◽  
Compliant Mechanisms ◽  
Computation Time ◽  
Initial Guess ◽  
Benchmark Problems ◽  
Topology Optimization Problem ◽  
Linear Elastic ◽  
Frame Element ◽  
Force Direction

The topology optimization problem for the synthesis of compliant mechanisms has been formulated in many different ways in the last 15 years, but there is not yet a definitive formulation that is universally accepted. Furthermore, there are two unresolved issues in this problem. In this paper, we present a comparative study of five distinctly different formulations that are reported in the literature. Three benchmark examples are solved with these formulations using the same input and output specifications and the same numerical optimization algorithm. A total of 35 different synthesis examples are implemented. The examples are limited to desired instantaneous output direction for prescribed input force direction. Hence, this study is limited to linear elastic modeling with small deformations. Two design parameterizations, namely, the frame element based ground structure and the density approach using continuum elements, are used. The obtained designs are evaluated with all other objective functions and are compared with each other. The checkerboard patterns, point flexures, the ability to converge from an unbiased uniform initial guess, and the computation time are analyzed. Some observations are noted based on the extensive implementation done in this study. Complete details of the benchmark problems and the results are included. The computer codes related to this study are made available on the internet for ready access.

scholarly journals Evaluation of the effect of force direction on stationary anchorage success of mini-implant with a lever-arm–shaped upper structure

2011 ◽  
Vol 81 (5) ◽  
pp. 776-782 ◽  
Author(s):  
Ki-Ho Park ◽  
Eun-Man Lee ◽  
Seung-il Shin ◽  
Seong-Hun Kim ◽  
Young-Guk Park ◽  
...  
Keyword(s):  
Primary Stability ◽  
The Other ◽  
Control Group ◽  
Removal Torque ◽  
Lever Arm ◽  
Mini Implants ◽  
Force Direction ◽  
The Mean ◽  
The Stability ◽  
Experimental Group

Abstract Objective: To compare the effect of clockwise and counterclockwise torque on the primary stability of a mini-implant with a lever-arm–shaped upper structure. Materials and Methods: Twenty-four white rabbits were used for this study. Two screw-type mini-implants were placed in each tibia. In all, 96 screws were inserted. Two weeks later, a 2-N force was applied to the mini-implants without an upper structure in eight rabbits (control group). The mini-implants of the other 16 rabbits were loaded with an upper structure (experimental group). In the experimental group, the two left mini-implants were loaded in a clockwise direction (CW group) and the two right implants were loaded in a counterclockwise direction (CCW group). The rabbits were sacrificed at 1 week or 8 weeks after loading in both control and experimental groups. The removal torque value (RTV) was measured in 15 of 16 mini-implants in each group and the remaining implant was processed for histologic examination. Results: At 1 week there were no significant differences in the mean RTV between the control, CW, and CCW groups. At 8 weeks, the RTV was higher in the control and experimental groups than in the respective 1-week groups. At 8 weeks, there were no significant differences in the RTV between the control and CW groups, but the CCW group showed a lower RTV. Conclusions: CCW torque can decrease the stability of a mini-implant, whereas a CW torque has no effect.

Sign in / Sign up

Export Citation Format

Share Document