Multidisciplinary Simulation Model for the Balancing of Powertrain Combustion, Control and Components for Optimal Fuel Consumption, Emissions, Cost and Performance for a Diesel Engine Powered Passenger Car

2012 ◽  
Author(s):  
Fredrik B. Ekstrom ◽  
Joop Somhorst
Keyword(s):  
Diesel Engine ◽  
Simulation Model ◽  
Fuel Consumption ◽  
Combustion Control ◽  
Passenger Car ◽  
And Performance ◽  
Multidisciplinary Simulation ◽  
Optimal Fuel Consumption

465Q Gasoline Engine Turbocharger Matching and Performance Calculation

2012 ◽  
Vol 500 ◽  
pp. 223-229 ◽  
Author(s):  
Peng Qi Zhang ◽  
Dong Hui Zhao ◽  
Peng Wu ◽  
Yin Yan Wang
Keyword(s):  
Simulation Model ◽  
Fuel Consumption ◽  
Test Bench ◽  
Gasoline Engine ◽  
Test Results ◽  
Simulation Error ◽  
And Performance ◽  
Set Up ◽  
Performance Calculation ◽  
Supercharged Engine

This article take the Dongan 465Q non-supercharged engine as the research object, the simulation model is built by GT-POWER and the corresponding test bench is set up. The simulation error is less than 3%, which indicates that the parameters of this model is correct, and can be used for further study of the gasoline engine. The supercharger, Garrett GT12, is selected by the matching calculation. The non-supercharged 465Q engine is modified as a turbocharged engine. The test results show that the power and the fuel consumption of the turbocharged engine is improved obviously, whose power is increased by 48% and fuel consumption is reduced by 4%.

scholarly journals Observations on and potential trends for mechanically supercharging a downsized passenger car engine:a review

2016 ◽  
Vol 231 (4) ◽  
pp. 435-456 ◽  
Author(s):  
Bo Hu ◽  
James WG Turner ◽  
Sam Akehurst ◽  
Chris Brace ◽  
Colin Copeland
Keyword(s):  
Fuel Consumption ◽  
Fuel Efficiency ◽  
Boost Pressure ◽  
Passenger Car ◽  
Charging System ◽  
Current State ◽  
Efficiency Performance ◽  
Variable Transmission ◽  
And Performance ◽  
Swept Volume

Engine downsizing is a proven approach for achieving a superior fuel efficiency. It is conventionally achieved by reducing the swept volume of the engine and by employing some means of increasing the specific output to achieve the desired installed engine power, usually in the form of an exhaust-driven turbocharger. However, because of the perceptible time needed for the turbocharger system to generate the required boost pressure, a characteristic of turbocharged engines is their degraded driveability in comparison with those of their naturally aspirated counterparts. Mechanical supercharging refers to the technology that compresses the intake air using the energy taken directly from the engine crankshaft. It is anticipated that engine downsizing which is realised either solely by a supercharger or by a combination of a supercharger and a turbocharger will enhance a vehicle’s driveability without significantly compromising the fuel consumption at an engine level compared with the downsizing by turbocharging. The capability of the supercharger system to eliminate the high exhaust back pressure, to reduce the pulsation interference and to mitigate the surge issue of a turbocharged engine in a compound-charging system offsets some of the fuel consumption penalty incurred in driving the supercharger. This, combined with an optimised down-speeding strategy, can further improve the fuel efficiency performance of a downsized engine while still enhancing its driveability and performance at a vehicle level. This paper first reviews the fundamentals and the types of supercharger that are currently used, or have been used, in passenger car engines. Next, the relationships between the downsizing, the driveability and the down-speeding are introduced to identify the improved synergies between the engine and the boosting machine. Then, mass production and prototype downsized supercharged passenger car engines are briefly described, followed by a detailed review of the current state-of-the-art supercharging technologies that are in production as opposed to the approaches that are currently only being investigated at a research level. Finally, the trends for mechanically supercharging a passenger car engine are discussed, with the aim of identifying potential development directions for the future. Enhancement of the low-end torque, improvement in the transient driveability and reduction in low-load parasitic losses are the three main development directions for a supercharger system, among which the adoption of a continuously variable transmission to decouple the supercharger speed from the engine speed, improvement of the compressor isentropic and volumetric efficiency and innovation of the supercharger mechanism seem to be the potential trend for mechanically supercharging a passenger car engine.

scholarly journals Preheating Of Sunflower Blended Biodiesel for the Improvement of Performance Characteristics of a DI Diesel Engine under Various Loads

2019 ◽  
Vol 8 (6) ◽  
pp. 921-926
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Dynamic Performance ◽  
Direct Injection ◽  
Specific Energy Consumption ◽  
Cetane Number ◽  
Diesel Oil ◽  
Performance Characteristics ◽  
Di Diesel Engine ◽  
And Performance

Due to fast depletion of fuel and for the huge demand of various engine fuels in large sectors and power generation, thse biodiesel which is derived from biological wastes can be a substitute of pure diesel oil. Diesel engine has the benefits of low fuel consumption, high potency, smart economical and dynamic performance. However at the identical time, the diesel engine has high NOx and soot emissions. And these two sorts of emissions provides a trade-off relationship which can bring difficulties to satisfy the necessities of emission rules of NOx and soot. This particular paper primarily reviews regarding using of preheated bio-diesel that contains 20 percentage of pure sunflower oil (biological name-Helianthus annuus) and analyses its performance characteristics for selected blend with completely variable loads. Various experiments were carried out by employing a four stroke single cylinder, direct injection, water cooled diesel engine with suitable specifications. Helianthus oil is mixed with bio diesel for fast burning inside the engine cylinder and by doing so , the Cetane number is quite high that leads to the ignition delay shorter. Therefore the overall content is preheated somewhat in order to lift its temperature so as to boost the burning process. Incorporating to this , it reduces the various emissions such as NOx, CO and smoke capacity by 2% to 3%. Various parameters are required to outline the analysis of combustion and performance characteristics of the test fuel like brake thermal efficiency(BTE),basic specific fuel consumption(BSFC), basic specific energy consumption (BSEC),temperature of the exhaust gas and emissions like NOx, unburn hydrocarbons(HC), carbon monoxide(CO) and smoke were carried out in the specified engine

Effect of HVO fuel mixtures on emissions and performance of a passenger car size diesel engine

2019 ◽  
Vol 140 ◽  
pp. 680-691 ◽  
Author(s):  
Ivan Bortel ◽  
Jiří Vávra ◽  
Michal Takáts
Keyword(s):  
Diesel Engine ◽  
Passenger Car ◽  
And Performance ◽  
Fuel Mixtures ◽  
Emissions And Performance

Development of Model-Based Combustion Control to Ensure Robustness of Emissions, Fuel Consumption and Noise Performances in New Generation Diesel Engine

2013 ◽  
Vol 46 (21) ◽  
pp. 95-100 ◽  
Author(s):  
Hiroya Sahara ◽  
Yoshie Kakuda ◽  
Sang-kyu Kim ◽  
Daisuke Shimo ◽  
Keiji Maruyama ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Combustion Control ◽  
Model Based ◽  
New Generation

The Key Role of the Closed-loop Combustion Control for Exploiting the Potential of Biodiesel in a Modern Diesel Engine for Passenger Car Applications

2011 ◽  
Vol 4 (2) ◽  
pp. 2576-2589 ◽  
Author(s):  
Claudio Ciaravino ◽  
Chiara Guido ◽  
Alberto Vassallo ◽  
Carlo Beatrice
Keyword(s):  
Diesel Engine ◽  
Closed Loop ◽  
Combustion Control ◽  
Passenger Car

scholarly journals Study on Emission and Performance of Diesel Engine Using Castor Biodiesel

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Md. Saiful Islam ◽  
Abu Saleh Ahmed ◽  
Aminul Islam ◽  
Sidek Abdul Aziz ◽  
Low Chyi Xian ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Performance Test ◽  
Engine Performance ◽  
Specific Fuel Consumption ◽  
Smoke Emission ◽  
Suitable Alternative ◽  
Biodiesel Blend ◽  
And Performance ◽  
Emission And Performance

This paper presents the result of investigations carried out in studying the emission and performance of diesel engine using the castor biodiesel and its blend with diesel from 0% to 40% by volume. The acid-based catalyzed transesterification system was used to produce castor biodiesel and the highest yield of 82.5% was obtained under the optimized condition. The FTIR spectrum of castor biodiesel indicates the presence of C=O and C–O functional groups, which is due to the ester compound in biodiesel. The smoke emission test revealed that B40 (biodiesel blend with 40% biodiesel and 60% diesel) had the least black smoke compared to the conventional diesel. Diesel engine performance test indicated that the specific fuel consumption of biodiesel blend was increased sufficiently when the blending ratio was optimized. Thus, the reduction in exhaust emissions and reduction in brake-specific fuel consumption made the blends of caster seed oil (B20) a suitable alternative fuel for diesel and could help in controlling air pollution.

scholarly journals Performance and Exhaust Gas Emission of Biodiesel Fuel with Palm Oil Based Additive in Direct Injection Compression Ignition Engine

2019 ◽  
Vol 16 (1) ◽  
pp. 6173-6187
Author(s):  
C. B. How ◽  
N. M. Taib ◽  
M. R. A. Mansor
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Palm Oil ◽  
Direct Injection ◽  
Engine Performance ◽  
Compression Ignition ◽  
Exhaust Gas Emission ◽  
And Performance ◽  
Engine Emission ◽  
Emission And Performance

Blending biodiesel in the diesel would increase the tendency of having a high viscosity fuel. For this reason, the addition of a small amount of additives into the blends may improve the engine performance and lead to better fuel consumption. The purpose of this paper is to experimentally investigate the performance and emissions generated by various mixtures of biodiesel and diesel with palm oil based additive in the compression ignition direct injection diesel engine of Yanmar TF90. Experiments were also conducted to identify the ideal biodiesel, diesel and the additive mixture that produces the optimum engine emission and performance. The experiment was conducted by using mixtures that consisted of 10%, 20% and 30% of biodiesel with and without the additives. From the results of the experiments, PB10 with 0.8 ml additives produced the highest braking power and lowest fuel consumption as compared to the diesel and the rest of the biodiesel blends. The presence of biodiesel and additives were found to not only improve the engine performance, but also led to the reduction of carbon emission. Although all the diesel, biodiesel and additive demonstrated low smoke emission with a complete combustion, a slight increase however, was observed in the NOx emission. In conclusion, PB10 is seen as the most ideal blend for diesel engine in terms of providing the most optimum engine emission and performance.

Passenger-Car Fuel Consumption Versus Performance in Retrospect

2001 ◽  
Author(s):  
Charles A. Amann
Keyword(s):  
Fuel Consumption ◽  
Fuel Economy ◽  
Environmental Protection Agency ◽  
Protection Agency ◽  
Passenger Car ◽  
Acceleration Time ◽  
Performance Metric ◽  
And Performance ◽  
Standing Start ◽  
Engine Power

Abstract Over the last quarter of the 1900s, the U.S. Environmental Protection Agency (EPA) has annually tabulated the fuel economy and performance characteristics of the new passenger-car fleet. Fuel economy was measured over the EPA combined urban and highway driving schedules. The performance metric was the estimated acceleration time from a standing start to 60 miles per hour (mph). In the present study, the interplay among factors influencing these characteristics is reviewed. Then, for the average new car in a given year, the manner in which fuel consumption and acceleration time are influenced by vehicle weight and engine power are examined. The departure of individual vehicles from this average trend is considered. Finally, a few of the prominent powertrain characteristics responsible for improvements in the tradeoff between fuel consumption and performance are listed.

Simulation of Combustion in a DI Diesel Engine Operating on Biodiesel Blends

2011 ◽  
Author(s):  
Keshav S. Varde ◽  
Shubha K. Veeramachineni
Keyword(s):  
Diesel Engine ◽  
Simulation Model ◽  
Fuel Consumption ◽  
Diesel Engines ◽  
Engine Performance ◽  
Experimental Investigations ◽  
Oxides Of Nitrogen ◽  
Biodiesel Blends ◽  
Di Diesel Engine ◽  
The Impact

There has been considerable interest in recent years in using blends of petroleum diesel and biodiesels in diesel engines. Some of the interests arise in making use of renewable fuels, or in reducing dependency on imported fossil fuels and, in some cases, to provide economic boost to agricultural industry. It is believed that substitution of a small amount of biodiesel for petroleum diesel can reduce the import of fuel and help in trade balance. Biodiesels, whether derived from vegetable oils or animal fat, have many properties that align with those of petroleum diesel. This makes biodiesel a good candidate for blending it in small quantities with petroleum diesel. Studies have shown biodiesel blends to work well in diesel engines. However, experimental investigations of biodiesel blends have shown some discrepancies in engine thermal efficiency and emissions of NOx. A combustion simulation model for diesel engine may help to understand some of the differences in engine performance when different fuels are used. This paper deals with an existing simulation model that was applied to a diesel engine operating on biodiesel blends. The model was a modified version of GT-Power that was specifically modified to fit the test engine. The model was calibrated using a single cylinder, naturally aspirated, DI diesel engine operating on ultra-low sulfur (ULSD) diesel. It was used to predict engine performance when operating on different blends of soy biodiesel and ULSD. The simulation utilized detailed physical and chemical properties of the blends to predict cylinder pressures, fuel consumption, and emissions of oxides of nitrogen (NOx). Comparison between predicted and experimental values showed good correlations. The predicted trends in fuel consumption, emissions of NOx and smoke showed comparable trends. The model allows the user to change fuel properties to assess the impact of variations in blend composition on exhaust emissions. This paper discusses comparisons between the predicted and experimental results and how fuel composition can possibly impact NOx emissions.

Sign in / Sign up

Export Citation Format

Share Document