scholarly journals Chitosan-based nanoparticles sustenance and potentiation of the antibacterial effect of ampicillin against drug resistance among strains of Escherichia coli

Bio-Research ◽  
2020 ◽  
Vol 18 (2) ◽  
Author(s):  
EB Onuigbo ◽  
C Anozie-Ikeanyi ◽  
NE Edeh ◽  
CO Eze ◽  
TH Gugu
Keyword(s):  
Drug Resistance ◽  
Drug Release ◽  
Encapsulation Efficiency ◽  
Antibacterial Effect ◽  
Sodium Tripolyphosphate ◽  
Chitosan Nanoparticles ◽  
In Vitro Drug Release ◽  
E Coli ◽  
Ampicillin Trihydrate

The study seeks to evaluate nanoparticles based on chitosan for enhanced delivery of ampicillin in plasmid-mediated drug resistance. Serial dilutions of a mixed population of E. coli was plated on nutrient agar and streaked on Replica-plate 25 random colonies using MacConkey agar with or without ampicillin (100 µg/ml) daily for 96 h. Nanoparticles were prepared by cross-linking chitosan with sodium tripolyphosphate with ampicillin trihydrate adsorbed. Three different batches were prepared for optimization. The nanoparticles were optimized based on encapsulation efficiency, in vitro drug release, pH stability and microbiological assay using two laboratory strains of E. coli. Increased resistance to ampicillin due to possible plasmid transfer was established in vitro after 96 h. The encapsulation efficiency of the three batches was between 21-57 %. The drug release showed a burst effect and slow extended release over 8 h and reached a peak of about 19 % release at the 6 and 7 h in Batch A, B and C. The pH of the particles was stable over a period of 6 d. The nanoparticles containing only 0.075 mg of ampicillin dropped in an agar well plate inoculated with 1 ml of E. coli J62 lac pro trp hispFlac::Tn3 (AmpR) gave an IZD of ≥ 25 mm. Chitosan nanoparticles holds good potentials in potentiating the antibacterial effect of ampicillin against possible plasmid-mediated drug resistance

scholarly journals Electrospinning of ampicillin trihydrate loaded PLA nanofibers: effect of drug concentration and PLGA addition on its morphology, drug delivery and mechanical properties

2021 ◽  
Author(s):  
Tuğba Eren Böncü ◽  
Nurten Ozdemir
Keyword(s):  
Mechanical Properties ◽  
Drug Release ◽  
Drug Concentration ◽  
Encapsulation Efficiency ◽  
Controlled Drug Release ◽  
In Vitro Drug Release ◽  
Nanofiber Diameter ◽  
Polymeric Nanofibers ◽  
Ampicillin Trihydrate

The aim of the study is to produce ampicillin trihydrate loaded PLA and PLA/PLGA polymeric nanofibers using HFIP as solvent via electrospinning. The effect of ampicillin trihydrate concentration (4-12%), the addition of PLGA and the amount of added PLGA (20-80%) on the spinnability of the solutions and morphology, average nanofiber diameter, encapsulation efficiency, in vitro drug release and mechanical properties of PLA and PLA/PLGA nanofibers were examined. All nanofibers have shown to have favorable encapsulation efficiency and mechanical properties. As the amount of ampicillin trihydrate increased and PLGA was added, nanofiber diameter increased while mechanical properties decreased. However, as the amount of added PLGA increased, a decrease in nanofiber diameter was observed. The increase in the drug amount caused an increase in the burst effect. The ideal drug concentration was determined to be 8% (F2), as it allows the prolonged and controlled drug release for up to 10 days. While in vitro drug release decreased with the addition of PLGA to PLA, it increased with the increasement of added PLGA to PLA. As a result of the study, it was concluded that the amount of the drug and the added PLGA concentration may affect the average nanofiber diameter, morphology, in vitro drug release and mechanical properties of the obtained electrospun PLA nanofibers.

Development of Nateglinide Loaded Graphene Oxide-Chitosan Nanocomposites: Optimization by Box Behnken Design

2019 ◽  
Vol 11 (2) ◽  
pp. 142-153
Author(s):  
Rutuja V. Deshmukh ◽  
Pavan Paraskar ◽  
S. Mishra ◽  
Jitendra Naik
Keyword(s):  
Fourier Transform ◽  
Graphene Oxide ◽  
Electron Microscope ◽  
Drug Release ◽  
Sustained Release ◽  
Encapsulation Efficiency ◽  
In Vitro Drug Release ◽  
Box Behnken Design ◽  
X Ray

Background: Nateglinide is an antidiabetic drug having biological half-life 1.5 h which shows a concise effect. Graphene oxide along with chitosan can be used as a nanocarrier for sustained release of Nateglinide. Objective: To develop Nateglinide loaded graphene oxide-chitosan nanocomposites and to evaluate for different characterization studies. Methods: Graphene Oxide (GO) was synthesized by improved hummer’s method and drug-loaded Graphene oxide - chitosan nanocomposites were prepared. Box Behnken design was used to carry out experiments. The nanocomposites were characterized for encapsulation efficiency and drug release. Morphology was studied using field emission scanning electron microscope and transmission electron microscope. An interaction between drug, polymer and GO was investigated by Fourier transform infrared spectroscopy and X-ray diffractometer along with in vitro drug release study. Results: The statistical evaluation of the design showed linear and quadratic models which are significant models for encapsulation efficiency (R1 0.6883, 0.9473) and drug loading (R2 0.6785, 0.9336), respectively. Fourier transform infrared spectroscopy showed the compatibility of GO, Chitosan and Nateglinide. X-ray diffractometer reveals the change in degree of crystallinity of drug. FE-SEM and TEM images confirmed the distribution of the drug within the nanocomposites. Design expert reveals that the concentration of GO has great influence on encapsulation efficiency. In Vitro drug release showed the sustained release of drug over the period of 12 h. Conclusion: GO-Chitosan nanocomposites can be used as a sustained release carrier system for Nateglinide to reduce dose frequency of drug as well as its probable side effects.

Preparation, characterization, in vitro drug release and biological studies of curcumin loaded dextran sulphate–chitosan nanoparticles

2011 ◽  
Vol 84 (3) ◽  
pp. 1158-1164 ◽  
Author(s):  
A. Anitha ◽  
V.G. Deepagan ◽  
V.V. Divya Rani ◽  
Deepthy Menon ◽  
S.V. Nair ◽  
...  
Keyword(s):  
Drug Release ◽  
Chitosan Nanoparticles ◽  
Dextran Sulphate ◽  
In Vitro Drug Release ◽  
Biological Studies

Formulation and in vitro evaluation of upconversion nanoparticle-loaded liposomes for brain cancer

2020 ◽  
Vol 11 (9) ◽  
pp. 557-571 ◽  
Author(s):  
Narendra ◽  
Abhishesh Kumar Mehata ◽  
Matte Kasi Viswanadh ◽  
Roshan Sonkar ◽  
Datta Maroti Pawde ◽  
...  
Keyword(s):  
Drug Release ◽  
Encapsulation Efficiency ◽  
Glioma Cells ◽  
C6 Glioma Cells ◽  
Upconversion Nanoparticles ◽  
Clinical Validation ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release

Aim: This work focused on the development of transferrin-conjugated theranostic liposomes consisting of docetaxel (DXL) and upconversion nanoparticles for the diagnosis and treatment of gliomas. Materials & methods: Upconversion nanoparticles and docetaxel-loaded theranostic liposomes were prepared by a solvent injection method. Formulations were analyzed for physicochemical properties, encapsulation efficiency, drug release, elemental analysis, cytotoxicity and fluorescence. Results: The particle size was around 200 nm with spherical morphology and an encapsulation efficiency of up to 75.93%, was achieved for liposomes with an in vitro drug release of 71.10%. The IC50 values demonstrated enhanced cytotoxicity on C6 glioma cells with targeted liposomes in comparison with nontargeted liposomes. Conclusion: Prepared theranostic liposomes may be promising for clinical validation after an in vitro and in vivo evaluation on cell lines and animals, respectively.

scholarly journals CURCUMIN LOADED CHITOSAN NANOPARTICLES FOR TOPICAL DELIVERY: FORMULATION DESIGN, IN VITRO EVALUATION, KINETICS AND STABILITY STUDIES

2021 ◽  
Vol 10 (2) ◽  
pp. 48-52
Author(s):  
J Adlin Jino Nesalin ◽  
Preethi Raj M N
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Topical Delivery ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
In Vitro Drug Release ◽  
Topical Gel

The main objective of this research is to evaluate a new approach for the preparation of bio adhesive nanoparticles and to design an innovative topical delivery system for curcumin which is able to enhance the drug anticancer activity. Curcumin encapsulated nanoparticles were prepared by ionic gelation method. The nanoparticles were found to be discrete, spherical with free-flowing properties and evaluated for particle size analysis, shape (scanning electron microscopy), drug encapsulation efficiency, FTIR, DSC studies and in vitro release performance. The best selected nanoparticles formulation (FS5, containing drug: polymer ratio 1:5) was incorporated into gels with a bio adhesive polymer. The Nanoencapsulated topical gels were evaluated for pH, spreadability, extrudability, viscosity, in vitro drug release, drug release kinetics, bio adhesion test, accelerated stability of selected gel formulation. In vitro drug release rate for selected Nanoencapsulated bio adhesive topical gel (FS3 gel, containing 1 % w/w of drug loaded nanoparticles and 0.6 % w/w of Carbopol 934) was found to control curcumin release over 12h. The results were then compared statistically and obtained a satisfactory correlation. Thus, in conclusion preparation protocol of Nanoencapsulated topical gel study may be adopted for a successful delivery of Curcumin for topical use.

scholarly journals PREPARATION AND CHARACTERIZATION OF CEFTRIAXONE SODIUM ENCAPSULATED CHITOSAN NANOPARTICLES

2017 ◽  
Vol 9 (6) ◽  
pp. 10 ◽  
Author(s):  
P. Manimekalai ◽  
R. Dhanalakshmi ◽  
R. Manavalan
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Chitosan Nanoparticles ◽  
Cross Linking ◽  
Burst Release ◽  
In Vitro Drug Release ◽  
Cumulative Percentage ◽  
Ceftriaxone Sodium

Objective: The objective of this study was to prepare ceftriaxone sodium chitosan nanoparticles (CS-NP) from different drug and polymer ratios and analyze their physicochemical characteristics.Methods: Ceftriaxone sodium loaded chitosan nanoparticles were prepared using chitosan as a polymer and tri sodium polyphosphate (TPP) as cross linking agent by ionic cross linking and coacervation with the aid of sonication. Various trials have been carried out for the confirmation of nanoformulation. Parameters such as the zeta potential, polydispersity, particle size, entrapment efficiency, in vitro drug release Thermo gravimetric analysis and scanning electron microscope of the nanoparticles were assessed for confirmation of nanoformulation.Results: The formulated nanoparticles showed mean particle size, polydispersity index and zeta potential to be 183.1±8.42 nm, 0.212±0.05, +38.5±1.6 mV respectively and the drug loading was found to be 46.42±10 %. In vitro drug release was showed a biphasic release pattern with initial burst release followed by sustained release of formulated nanoparticles. The cumulative percentage of drug release was about 83.08 %.Conclusion: Formulation F2 was found to be the best formulation with a higher cumulative percentage of drug release. Modified ionic gelation method can be utilized for the development of chitosan nanoparticles of ceftriaxone sodium. Polymer and crosslinking agent concentrations and sonication time are rate-limiting factors for the development of the optimized formulation. The chitosan nanoparticles developed would be capable of sustained delivery of ceftriaxone sodium.

scholarly journals FORMULATION AND EVALUATION OF CHITOSAN NANOPARTICLES FOR IMPROVED EFFICACY OF ITRACONAZOLE ANTIFUNGAL DRUG

2018 ◽  
Vol 11 ◽  
Author(s):  
Charanteja Reddy , Y
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Chitosan Nanoparticles ◽  
Antifungal Drugs ◽  
Size Analysis ◽  
Therapeutic Drug ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Morphological Studies

Objective: The main objective of the study was to formulate and evaluate the chitosan nanoparticles to improve the therapeutic efficacy of itraconazole by loading in nanoparticle drug delivery system. Designing the formulation of the drug itraconazole prolongs the therapeutic concentration of the drug in the blood and which will lower the frequency of dosing and also improves the efficacy of the drug. Methods: Itraconazole nanoparticles are prepared by ionic gelation method; here, chitosan is used as polymer. The formulated nanoparticles are evaluated for external morphological studies by scanning electron microscope (SEM), drug content, in vitro drug release studies, as well as infrared (IR) spectral analysis. Results: The Fourier transform IR spectra show that there was no interaction between drug and polymers; hence, they are compatible. Percentage entrapment efficiency, drug content, and percentage yield were higher for F3 formulation. The particle size analysis shows that every particle in the formulations gave the range of 148–227 nm, respectively; increasing in the particle size observed with varying concentration of polymer. SEM analysis of the nanoparticles shows that all the formulations were spherical and smooth with ideal surface morphology. As the concentration of polymer, the drug release decreased proportionally. The stability studies were carried out on the optimized formulation for 2 months at 30±2°C and 60±5% RH and 40±2°C and 75±5% RH; finally, it was observed that there was no change in drug content and in vitro drug release profile even after storage at 30±2°C and 60±5% RH and 40±2°C and 75±5% RH for 2 months. Conclusion: Itraconazole is one among the most widely used antifungal drugs. Designing the formulation of drug itraconazole prolongs therapeutic drug concentration in the blood and decreases dosage frequency and also enhances the efficacy of drug.

In vitro drug release and antibacterial activity evaluation of silk fibroin coated vancomycin hydrochloride loaded poly (lactic-co-glycolic acid) (PLGA) sustained release microspheres

2022 ◽  
pp. 088532822110640
Author(s):  
Shengtang Li ◽  
Xuewen Shi ◽  
Bo Xu ◽  
Jian Wang ◽  
Peng Li ◽  
...  
Keyword(s):  
Drug Release ◽  
Encapsulation Efficiency ◽  
Glycolic Acid ◽  
Drug Loading ◽  
Burst Release ◽  
Plga Microspheres ◽  
In Vitro Drug Release ◽  
Initial Burst ◽  
Initial Burst Release

Currently, the treatment of osteomyelitis poses a great challenge to clinical orthopedics. The use of biodegradable materials combined with antibiotics provides a completely new option for the treatment of osteomyelitis. In this study, vancomycin hydrochloride (VANCO) loaded poly (lactic-co-glycolic acid) (PLGA) microspheres were prepared by a double emulsion solvent evaporation method, and the in vitro drug release behaviors of the drug loaded microspheres were explored after coating with different concentrations of silk fibroin (SF). Drug loading, encapsulation efficiency, Scanning electron microscopy, particle size analysis, Fourier transform infrared spectroscopy, hydrophilicity, in vitro drug release, and in vitro antibacterial activity were evaluated. The results showed that the drug loading of vancomycin loaded PLGA microspheres was (24.11 ±1.72)%, and the encapsulation efficiency was (48.21 ±3.44)%. The in vitro drug release indicated that the drug loaded microspheres showed an obvious initial burst release, and the drug loaded microspheres coated with SF could alleviate the initial burst release in varying degrees. It also can reduce the amount of cumulative drug release, and the effect of microspheres coated with 0.1% concentration of SF is the best. The time of in vitro drug release in different groups of drug loaded microspheres can be up to 28 days. The microspheres coated with (0.1%SF) or without (0%SF) SF showed a cumulative release of (82.50±3.51)% and (67.70±3.81)%,respectively. Therefore, the surface coating with SF of vancomycin loaded microspheres can alleviate the initial burst release, reduce the cumulative drug release, potentially prolong the drug action time, and improve the anti-infection effect.

Sign in / Sign up

Export Citation Format

Share Document