Heavy metal levels in cassava flour sold in Okura, Ejule and Ojapata of kogi state, Nigeria

2021 ◽  
Vol 19 (3) ◽  
pp. 45-54
Author(s):  
Olubiyo Gloria Taiye ◽  
Yakubu Anita Ohunene ◽  
Olubiyo Comfort Kehinde
Keyword(s):  
Heavy Metals ◽  
Human Exposure ◽  
Cassava Flour ◽  
Low Concentrations ◽  
Zn Concentration ◽  
Guideline Values ◽  
Metal Levels ◽  
Iron And Zinc

Cassava (Manihot esculenta) is a major source of carbohydrate and a staple food cultivated in Nigeria especially in Kogi  State. Determination of heavy metals in cassava flour from major markets:(Okura ,Ejule and Ojapata) in Kogi East was done to ascertain the quality of cassava flour and its human exposure path.Lead, cadmium, iron and zinc contents were determined using Atomic Absorption Spectrophotometer (AAS).The results were analysed using Analysis of Variance (ANOVA), Duncan Multiple Range Test (DMRT) and  Independent Sample t-test. Zn concentration in Ejule (Control) was as low as 0.002±0.000a . Pd,Cd,Fe, and Zn screened were far below the WHO guideline values or permissible limit of metal in food.This implies that the metal toxicants present in the cassava flour is in such low concentrations that render the food non-toxic and edible. Keywords: Heavy metals; pollution; cassava flour; human exposure.

Determination of Traces Heavy Metals from Solid Residues Formed by Combustion of Lignite in Relation to Degree of Accessibility in Soil and Plants

2017 ◽  
Vol 68 (10) ◽  
pp. 2363-2366
Author(s):  
Delia Nica Badea
Keyword(s):  
Heavy Metals ◽  
Power Plant ◽  
Thermal Power ◽  
Reference Value ◽  
Combustion Products ◽  
Toxic Heavy Metals ◽  
Area Of Influence ◽  
Risk Potential

The paper evaluates the presence and content of traces of heavy metals Hg, Pb, Ni, Cd (total forms) from coal and solid combustion products, the degree of transfer and accessibility in the area of influence of a lignite power plant. The content of toxic heavy metals in residues are characterized by RE Meiji [ 1 (Pb and Hg) and REMeij �1 (Ni and Cd) for the filter ash. Pb and Ni content in the soil exceeds normal values, and Pb exceeds and alert value for sensitive soils around the residue deposit (70.20 mg.Kg-1). The degree of accessibility of the metals in plants (TF), reported at the Khan reference value (0.5), indicates a significant bioaccumulation level for the metals: Cd (1.9) and Hg (0.6) inside the deposit; Cd (0.39) at the base of the deposit, Hg (0.8) in the area of the thermal power plant. The trace levels of heavy metals analyzed by GFAAS and CVAAS (Hg), indicates a moderate risk potential for food safety and quality of life in the studied area.

scholarly journals Distribution characteristics and potential risk assessment of heavy metals in seawater and sediment of Liaodong Bay

2020 ◽  
Vol 206 ◽  
pp. 02004
Author(s):  
Nianting Si ◽  
Liang Qu
Keyword(s):  
Heavy Metals ◽  
Good Condition ◽  
Sediment Quality ◽  
Potential Ecological Risk ◽  
National Guideline ◽  
Liaodong Bay ◽  
Guideline Values ◽  
Contaminant Metals ◽  
Ecological Risk Analysis

Distribution of heavy metals (Hg, Cu, Pb, Zn, Cd and Cr) in the seawater and sediments were studied based on data from two oceanographic surveys carried out in Liaodong Bay in May and October 2016. The results showed that the values of heavy metals in seawater represent a uniform distribution, while no trends were detected for spatial distribution. High values of heavy metals in sediment were generally distributed nearshore areas in October. Concentrations of Pb, Zn, Hg in seawater were higher than the national guideline values of Mar. sediment quality of China. Values of Cu, Zn, Cd and Hg were higher than the national guideline values of Mar. sediment quality of China in October, while quality was in good condition in May. Correlation analysis showed that TOC was mainly contributed for the variations of heavy metals. The potential ecological risk analysis of heavy metals indicates that Hg, Cd and Cu should be listed as the priority contaminant metals in Liaodong Bay.

scholarly journals SPECTROSCOPIC DETERMINATION OF SOME HEAVY METALS AND THEIR EFFECT ON THE QUALITY OF GROUNDWATER.

2017 ◽  
Vol 5 (4) ◽  
pp. 1276-1289
Author(s):  
R.M.Abd Elaal ◽  
◽  
W.H. Hegazy ◽  
I.A. Ibrahem ◽  
M.A. Esmail ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Spectroscopic Determination

scholarly journals Effect of Wastewater Sample Pre-Treatment on Determination of Selected Heavy Metals Using ICP-MS Method

2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Iva KOTALOVÁ ◽  
Katrin CALÁBKOVÁ ◽  
Martina NOVÁČKOVÁ ◽  
Silvie DRABINOVÁ ◽  
Silvie HEVIÁNKOVÁ
Keyword(s):  
Heavy Metals ◽  
Nitric Acid ◽  
Polyaromatic Hydrocarbons ◽  
Treated Wastewater ◽  
Wastewater Sample ◽  
Lead And Cadmium ◽  
Low Concentrations ◽  
Icp Ms ◽  
Pre Treatment

Polychlorinated substances, polyaromatic hydrocarbons, heavy metals and pesticides are among the priority even at low concentrations. The problem, however, is that such low concentrations are impossible to measure using most available methods. This researchfocused on the determination of selected priority substances – heavy metals, namely lead and cadmium, in which the determination ofPb and Cd in wastewater by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) was preceded by water sample pre-treatment.The paper deals with the influence of the pre-treatment on the resulting measured values. Two processes were selected as pre-treatmentprocesses. The first pre-treatment procedure was a simple filtration using a filter paper for moderate filtration. As the second procedure, we applied decomposition of the sample by nitric acid in the open system. The pre-treated wastewater samples were subsequentlyexamined using ICP-MS. Based on the obtained results, we can conclude that decomposition of the sample by nitric acid in the opensystem is a more suitable pre-treatment method for water samples

scholarly journals Research Note: Stream water quality of a Community-Based Forest Management (CBFM)-protected watershed in Baybay, Leyte, Philippines

2008 ◽  
pp. 137-146
Author(s):  
Arturo Pasa
Keyword(s):  
Heavy Metals ◽  
Water Quality ◽  
Forest Management ◽  
Stream Water ◽  
Research Note ◽  
Total Hardness ◽  
Stream Water Quality ◽  
Community Based ◽  
Low Concentrations

The study assessed the quality of stream water of the watershed within the Community-Based Forest Management (CBFM) Project in Cienda, Gabas, Baybay, Leyte, Philippines. Results showed that, on the average, streamflow velocity was 0.30m/sec, streamflow volume 0.32m3/sec, turbidity 2.96 ntu and the associated sediments 16.0 mg/ L. Odor and taste were unobjectionable. pH ranged from 7.50 to 7.0 while total hardness from 7.84 to 15.16 mg/L. The average nitrite (NO2) content was 11.115mg/L while nitrate (NO3) was 1.05 mg/L. The concentration of nutrients was also very low. Phosphorous (P) ranged only from 2.20 to 4.46 mg/kg or parts per million (ppm) while potassium (K) ranged from 3.71 to 3.90 ppm. Sodium (Na), calcium (Ca), and magnesium (Mg) concentrations were also very low. Heavy metals were detected but also at low concentrations.

scholarly journals Bees: bioindicators of the environment

2020 ◽  
Author(s):  
Iryna Kovalchuk
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Raw Materials ◽  
Literature Information ◽  
Heavy Metals Accumulation ◽  
Systems Research ◽  
Metals Accumulation ◽  
Methodological Approaches

It is well-known that melliferous bees are the most sensitive indicators of ecologic conditions of natural environment. Researches in recent years show that bees and bee products can accumulate selectively some heavy metals, radioactive substances, pesticides and other polluters. Scales of heavy metals accumulation on the territory of Ukraine, as toxins of technologic origin unfortunately increase. Environmental pollution by heavy metals leads to their accumulation in plant and animal raw materials and production, consequently their quality decreases. It was proved that apiary accommodation in heavy metal polluted territories leads to their accumulation in pollen, honey bee-comb and wax. But the questions concerning study of peculiarities of sources, ways of pollution and heavy metals content in bee products are not enough lightened, and that was the purpose of our work. Generalized we present in literature information and results of our researches about the use of bees and bee products in quality of bioindicator contamination of environment by heavy metals. Dependence of content of heavy metals is set in the organism of bees in relation intensity of greening to contamination of environment. It is marked on the necessity of lead through of systems research in relation to determination of content of heavy metals in fabrics of bees and bee products with the purpose of search of new methodological approaches for authentication these toxicant of objective environment of contamination and him apimonitoring. Methodological elements of the researches of regularities of heavy metals and lipids content in the tissues of different anatomic sections of the organism and bee products were elaborated.

Determination of Contaminated Heavy Metals in Lacquer Thinner

2018 ◽  
Vol 879 ◽  
pp. 144-148
Author(s):  
Woravith Chansuvarn ◽  
Kunawoot Jainae
Keyword(s):  
Heavy Metals ◽  
Trace Metals ◽  
Absorption Spectrometry ◽  
High Concentration ◽  
X Ray ◽  
Wet Digestion ◽  
Clear Solution ◽  
Cu And Zn

The aim of this work needed to discover the problem of lacquer thinner products claimed with dissatisfying the quality of coating and color appearance. The trace metals produced cans was focused on release to solvents. The contaminated trace metals including Fe, Sn, Cu, and Zn in lacquer thinner were also determined by atomic absorption spectrometry (AAS). The lacquer thinner samples were simply carbonized to be ashes by furnace muffle at 550°C for 8 hours. The carbonized ashes were then also digested by conventional wet digestion with concentrated nitric acid until a clear solution was archived. Twenty samples of lacquer thinner were achieved from the paint manufacturer. The content of Fe, Sn, Cu, and Zn was found in the range of 0.0631-77.190 mg/kg, ND-12.613 mg/kg, ND-1.4679 mg/kg, and ND-0.4028 mg/kg, respectively. The result of high concentration of Fe related to the appearance of lacquer thinner color. The evidence of released heavy metals in the ashes of lacquer thinner samples was evaluated by X-ray fluorescence technique. The result of this work was concluded that the contaminated trace metals in the suspected lacquer thinner samples were leached from the metallic package.

scholarly journals Determination of Heavy Metals and Pesticides in Ginseng Products

2001 ◽  
Vol 84 (3) ◽  
pp. 936-939 ◽  
Author(s):  
Ikhlas A Khan ◽  
James Allgood ◽  
Larry A Walker ◽  
Ehab A Abourashed ◽  
Daniel Schlenk ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Total Concentration ◽  
Herbal Medicines ◽  
Over The Counter ◽  
Contaminant Exposure ◽  
Cadmium Lead ◽  
Contaminant Accumulation ◽  
Persistent Pesticides

Abstract Medicinal plants may carry residuals of environmentally persistent pesticides or assimilate heavy metals in varying degrees. Several factors may influence contaminant accumulation, including species, level and duration of contaminant exposure, and topography. As part of a program for assessment of the quality of herbal medicines, we have analyzed 21 over-the-counter ginseng (Panax ginseng) products in various dosage forms. Chromium, mercury, and arsenic were undetectable above their limits of detection in both liquid and solid samples; while cadmium, lead, and nickel were present in the majority of samples. The chlorinated pesticide levels varied widely. In most samples, the total concentration of pesticides was below 100 ppb; while in 5 samples the total concentration exceeded 100 ppb.

scholarly journals Determination of the content of Pb, Cd, Cu, Zn in dairy products from various regions of Poland

2019 ◽  
Vol 17 (1) ◽  
pp. 694-702
Author(s):  
Monika Sujka ◽  
Urszula Pankiewicz ◽  
Radosław Kowalski ◽  
Artur Mazurek ◽  
Katarzyna Ślepecka ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Dairy Products ◽  
The Other ◽  
Human Organism ◽  
Copper And Zinc ◽  
Zn Concentration ◽  
Cu And Zn ◽  
Milk And Dairy Products

AbstractThe toxicity of heavy metals and their capacity for accumulation in the human organism make it necessary to conduct monitoring of their concentration in food. The objective of the study was to determine the content of lead, cadmium, copper and zinc in milk and dairy products from various regions of Poland: the Lublin Region, Podlasie, Podkarpacie, and Silesia. The study showed the presence of the analysed heavy metals in most of the products. The content of lead was related to the level of industrialisation of a region. Higher levels of Pb were found in products from Silesia than in those from the other regions. The study revealed the presence of cadmium in 50% of the samples. Its content varied in range from 0.0067 to 0.0058 mg/kg. The levels of Cu and Zn concentration in the analysed products were within broad ranges, from 0.0015 to 4.94 mg/kg and from 0.01 to 56.44 mg/kg, respectively. In the case of all analysed elements an increase in their concentration was noted in cheese spreads and cottage cheeses. No relationship was found between the content of heavy metals in the analysed products, and the region of their origin.

scholarly journals Determination of some heavy metal levels in soft drinks from Turkey using ICP/OES method

2010 ◽  
Vol 28 (No. 3) ◽  
pp. 213-216 ◽  
Author(s):  
M. Bingöl ◽  
G. Yentür ◽  
B. Er ◽  
A.B. Öktem
Keyword(s):  
Heavy Metals ◽  
Soft Drinks ◽  
Emission Spectrometry ◽  
Icp Oes ◽  
Metal Levels ◽  
Zinc Cadmium ◽  
Copper Zinc ◽  
Arsenic Copper ◽  
Cadmium And Lead

Total number of 104 canned soft drinks collected from several regions in Turkey were analysed. The purpose of this study was to determine the levels of heavy metals in the drinks commonly consumed in Turkey. Quantitative determination of heavy metals: arsenic, copper, zinc, cadmium, and lead in all samples was carried out by ICP-OES (Inductively Coupled Plasma-Optical Emission Spectrometry) method. The mean levels (± SE) of arsenic, copper, zinc, cadmium, and lead were found to be 0.037 ± 0.002 mg/kg, 0.070 ± 0.009 mg/kg, 0.143 ± 0.012 mg/kg, 0.005 ± 0.0003 mg/kg, and 0.029 ± 0.002 mg/kg, respectively, in soft drinks. Our data revealed that arsenic, copper, zinc, cadmium, and lead mean levels found in all soft drinks, collected from several regions in Turkey, were within the Turkish Food Codex (TFC) values.

Sign in / Sign up

Export Citation Format

Share Document