scholarly journals Simulation of Quasi-Isotropic E-Glass Composite Laminate at Low Velocity Impact with Cohesive Interface Elements

2020 ◽  
pp. 128-140
Keyword(s):  
Composite Laminate ◽  
Impact Test ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Interface Elements ◽  
Cohesive Interface ◽  
Isotropic Composite ◽  
Structural Impact ◽  
The Impact

This paper examines the expediency of interface elements in modeling of impact damage analysis for Eglass composite laminate under low velocity impact test. Numerical modelsare built adopting cohesive interface behavior to authenticate the cross-ply damage response; and successively used the strategy to model the impact response of quasi-isotropic composite laminate. Impact test are performed to characterize the induced-damage behavior in quasi-isotropic composite laminate at different impact energy test in terms of impact force, displacement and damage size as well as the stress failure trajectory. Numerical result shows reliability of the model for structural impact analysisin damage initiation and progression in laminated composite plates. The simulation result though reveals large deformation, yet, did not yield in total fracture. This development shows the importance of adopting interface elements in structural impact damage criterion to trigger constraints effect on initiation phase.The study also reveals that the bottom most surface suffers huge deformation compare to the impact surface. It divulges that the extent of damage area in each ply of the composite laminate orients in the fiber direction in ‘star-shaped contour. The main novelty is the capability of using this model for structural impact analysis on both cross-ply and quasi-isotropic composite laminate.

scholarly journals Optical Evaluation on Delamination Buckling of Composite Laminate with Impact Damage

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
J. T. Ruan ◽  
F. Aymerich ◽  
J. W. Tong ◽  
Z. Y. Wang
Keyword(s):  
Composite Laminate ◽  
Impact Damage ◽  
Testing Machine ◽  
Local Deformation ◽  
Image Correlation ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Delamination Buckling ◽  
3D Deformation ◽  
The Impact

The delamination buckling and growth behaviors of a cross-ply composite laminate with damage induced by low velocity impact are investigated optically using three-dimensional digital image correlation (3D-DIC) method. For the 3D deformation measurement, the 3D-DIC setup comprised of two CCD cameras was adopted. The rectangle specimen was impacted under the impact energy of 7.0 J using a drop-weight testing machine, and the impact damage was detected by means of X-ray nondestructive evaluation (NDE) technique. The 3D deformation field measured with the optical system clearly reveals that the delamination buckling characteristic of the specimen mainly appears local deformation mode under compression after impact test. Moreover, the behavior of delamination growth evaluated by the 3D-DIC optical method reasonably agrees with the NDE observed damage result after compression.

Coda Waves for Health Monitoring of Composites Under Low-Velocity Impact

2021 ◽  
Author(s):  
Subal Sharma ◽  
Vinay Dayal
Keyword(s):  
Ultrasonic Waves ◽  
Coda Waves ◽  
Low Velocity Impact ◽  
Coda Wave ◽  
Low Velocity ◽  
Fibrous Composite Material ◽  
Velocity Impact ◽  
Isotropic Composite ◽  
The Impact ◽  
Impact Damages

Abstract Coda waves have been shown to be sensitive to lab-controlled defects such as very small holes in fibrous composite material. In the real world, damages are subtler and more irregular. The main objective of this work is to investigate coda wave capability to detect low-velocity impact damages. The emphasis is to detect the presence of barely visible impact damages using ultrasonic waves. Detection of incipient damage state is important as it will grow over the life of the structure. Differential features, previously used in similar work, have been utilized to detect realistic impact damages on carbon fiber composites. Quasi-isotropic composite laminates were subjected to low-velocity impact energy ranging from 2J to 4.5J. Two differential features reported could be used detect the presence of damage. It is also observed that ply orientation can be a deterministic factor for indicating damages. The size and shape of the impact damage has been characterized using ultrasonic C-scans. Results indicate that coda waves can be used for the detection of damage due to low-velocity impact.

Low Velocity Impact on Fiber Reinforced Geocomposites

2016 ◽  
Vol 827 ◽  
pp. 145-148 ◽  
Author(s):  
Sneha Samal ◽  
David Reichmann ◽  
Iva Petrikova ◽  
Bohdana Marvalova
Keyword(s):  
Impact Damage ◽  
Acoustic Vibration ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Impact Behaviour ◽  
Reinforced Composite ◽  
Before And After ◽  
Two Parameters ◽  
The Impact

Low velocity impact strength of the fabric reinforced geocomposite has investigated in this article. Various fabrics such as carbon and E-glass were considered for reinforcement in geopolymer matrix. The primary two parameters such as low velocity, impact damage modes are explained on the E-glass and carbon based fabric geocomposite. The onset mode of damage to failure mode is examined through C-scan analysis. The quality of the composite is observed using c-scan with acoustic vibration mode of sensor before and after impact test. Then the effect of fabric and matrix on the impact behaviour is discussed. Residual strength of the composite is measured to determine post impact behaviour. It has been observed that resistance properties of E-glass reinforced composite is better than carbon fabric reinforced composite.

Fatigue Behavior of Impacted Plain-Weave Glass/Epoxy Composites under Tensile Fatigue Loading

2005 ◽  
Vol 297-300 ◽  
pp. 1291-1296 ◽  
Author(s):  
Ki Weon Kang ◽  
Jung Kyu Kim ◽  
Heung Seob Kim
Keyword(s):  
Fatigue Life ◽  
Impact Damage ◽  
Fatigue Behavior ◽  
Fatigue Loading ◽  
Epoxy Composites ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Damage Behavior ◽  
Plain Weave ◽  
The Impact

The goals of this paper are to identify the impact damage behavior of plain-weave E-glass/epoxy composites and predict the fatigue life of the composites with impact-induced damage under constant amplitude loading. To identify these behaviors, the low velocity impact and fatigue after impact tests are performed for glass/epoxy composites having two types of fiber orientations. The impact damage behavior is dependent on the fiber orientation of the composites. The fatigue life of the impacted composites can be identified through the prediction model, which was proposed on the carbon/epoxy laminates by authors regardless of fiber orientations.

Comparison of the impact damage resistance of non-hybrid and intra-ply hybrid carbon/E-glass/polypropylene non-crimp thermoplastic composites

2018 ◽  
Vol 38 (1) ◽  
pp. 31-45 ◽  
Author(s):  
Gaye Kaya
Keyword(s):  
Damage Tolerance ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Thermoplastic Composites ◽  
Low Velocity ◽  
Impact Properties ◽  
Compression After Impact ◽  
Post Impact ◽  
The Impact ◽  
Hybrid Carbon

This study aims to compare the low-velocity impact and post-impact properties of intra-ply hybrid carbon/E-glass/polypropylene non-crimp thermoplastic composites with non-hybrid carbon/PP and E-glass/PP non-crimp thermoplastic composites. Impact test was performed at four energy levels as 15 J, 30 J, 45 J and 60 J. Post-impact properties of hybrid thermoplastic composites were tested by compression after impact method for each energy level to understand the impact damage tolerance of intra-ply hybrid carbon/E-glass/PP non-crimp thermoplastic composites. The effect of hybridization on energy absorption of composites was not significant, while C-scan results showed that the intra-ply hybrid non-crimp thermoplastic composites had smaller impact damage areas in comparison to the non-hybrid samples. Compression and compression after impact tests results confirmed that the intra-ply hybridization increased the toughness of the composite laminates. Also, the residual compression strength/modulus increased with hybridization which indicated to damage tolerance.

scholarly journals Determination of Impact Damage in CFRP via PVDF Signal Analysis with Support Vector Machine

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5207
Author(s):  
Hyun-Taik Oh ◽  
Jong-Ick Won ◽  
Sung-Choong Woo ◽  
Tae-Won Kim
Keyword(s):  
Support Vector Machine ◽  
Vinylidene Fluoride ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Electrical Performance ◽  
Support Vector ◽  
Discrete Wavelet ◽  
Low Velocity ◽  
Damage State ◽  
The Impact

Carbon fiber reinforced plastics (CFRPs) have high specific stiffness and strength, but they are vulnerable to transverse loading, especially low-velocity impact loadings. The impact damage may cause serious strength reduction in CFRP structure, but the damage in a CFRP is mainly internal and microscopic, that it is barely visible. Therefore, this study proposes a method of determining impact damage in CFRP via poly(vinylidene fluoride) (PVDF) sensor, which is convenient and has high mechanical and electrical performance. In total, 114 drop impact tests were performed to investigate on impact responses and PVDF signals due to impacts. The test results were analyzed to determine the damage of specimens and signal features, which are relevant to failure mechanisms were extracted from PVDF signals by means of discrete wavelet transform (DWT). Support vector machine (SVM) was used for optimal classification of damage state, and the model using radial basis function (RBF) kernel showed the best performance. The model was validated through a 4-fold cross-validation, and the accuracy was reported to be 92.30%. In conclusion, impact damage in CFRP structures can be effectively determined using the spectral analysis and the machine learning-based classification on PVDF signals.

scholarly journals Assessment of low-velocity impact damage in composites by the measure of second-harmonic guided waves with the phase-reversal approach

2019 ◽  
Vol 103 (1) ◽  
pp. 003685041988107 ◽  
Author(s):  
Weibin Li ◽  
Chang Jiang ◽  
Xinlin Qing ◽  
Liangbing Liu ◽  
Mingxi Deng
Keyword(s):  
Guided Waves ◽  
Second Harmonic ◽  
Impact Damage ◽  
Guided Wave ◽  
Second Order ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Phase Reversal ◽  
The Impact

Structural strength and integrity of composites can be considerably affected by the low-velocity impact damage due to the unique characteristics of composites, such as layering bonded by adhesive and the weakness to impact. For such damage, there is an urgent need to develop advanced nondestructive testing approaches. Despite the fact that the second harmonics could provide information sensitive to the structural health condition, the diminutive amplitude of the measured second-order harmonic guided wave still limits the applications of the second-harmonic generation–based nonlinear guided wave approach. Herein, laminated composites suffered from low-velocity impact are characterized by use of nonlinear guided waves. An enhancement in the signal-to-noise ratio for the measure of second harmonics is achieved by a phase-reversal method. Results obtained indicate a monotonic correlation between the impact-induced damage in composites and the relative acoustic nonlinear indicator of guided waves. The experimental finding in this study shows that the measure of second-order harmonic guided waves with a phase-reversal method can be a promising indicator to impact damage rendering in an improved and reliable manner.

scholarly journals Static Residual Tensile Strength Response of GFRP Composite Laminates Subjected to Low-Velocity Impact

2020 ◽  
Vol 10 (16) ◽  
pp. 5480
Author(s):  
Jong-Il Kim ◽  
Yong-Hak Huh ◽  
Yong-Hwan Kim
Keyword(s):  
Tensile Strength ◽  
Composite Laminates ◽  
Impact Damage ◽  
Image Correlation ◽  
Matrix Cracking ◽  
Low Velocity Impact ◽  
Stress Concentrations ◽  
Low Velocity ◽  
Full Field ◽  
The Impact

The dependency of the static residual tensile strength for the Glass Fiber-Reinforced Plastic (GFRP) laminates after impact on the impact energy level and indent shape is investigated. In this study, two different laminates, unidirectional, [0°2]s) and TRI (tri-axial, (±45°/0°)2]s), were prepared using the vacuum infusion method, and an impact indent on the respective laminates was created at different energy levels with pyramidal and hemispherical impactors. Impact damage patterns, such as matrix cracking, delamination, debonding and fiber breakage, could be observed on the GFRP laminates by a scanning electron microscope (SEM), and it is found that those were dependent on the impactor head shape and laminate structure. Residual in-plane tensile strength of the impacted laminates was measured and the reduction of the strength is found to be dependent upon the impact damage patterns. Furthermore, in this study, stress concentrations in the vicinity of the indents were determined from full-field stress distribution obtained by three-dimensional Digital Image Correlation (3D DIC) measurement. It was found that the stress concentration was associated with the reduction of the residual strength for the GFRP laminates.

A Study on Low Velocity Impact of Woven Glass/Phenolic Composite Laminates Considering Environmental Effects

2005 ◽  
Vol 297-300 ◽  
pp. 1303-1308 ◽  
Author(s):  
Jae Hoon Kim ◽  
Duck Hoi Kim ◽  
Hu Shik Kim ◽  
Byoung Jun Park
Keyword(s):  
Compressive Strength ◽  
Environmental Effects ◽  
Impact Loading ◽  
Composite Laminates ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Internal Damage ◽  
The Impact ◽  
Phenolic Composite

The objectives of this study are to evaluate the internal damage and compressive residual strength of composite laminate by impact loading. To investigate the environmental effects, as-received and accelerated-aged glass/phenolic laminates are used. UT C-Scan is used to determine the impact damage characteristics and CAI tests are carried out to evaluate quantitatively the reduction of compressive strength by impact loading. The damage modes of the woven glass/phenolic laminates are evaluated. In the case of the accelerated-aged laminates, as aging time increases, initial failure energy and residual compressive strength decrease.

Sign in / Sign up

Export Citation Format

Share Document