scholarly journals PERANCANGAN ANTENA MIKROSTRIP RECTANGULAR PATCH SEBAGAI PENERIMA TELEVISI

2020 ◽  
Vol 5 (1) ◽  
pp. 11-20
Author(s):  
Bambang Bagus ◽  
Anggit Yudha Bagaskara
Keyword(s):  
Return Loss ◽  
Rectangular Patch

Teknologi digital pada media broadcast salah satunya adalah televisi (TV), dimana memiliki keunggulan salah satunya adalah tahan terhadap noise. Antena adalah salah satu komponen terpenting dari telekomunikasi digital. Berbagai macam antena telah banyak dikembangkan untuk beragam aplikasi, salah satunya adalah antena Mikrostrip. Pada penelitian ini dibuat antena Mikrostrip berbentuk rectangular, Antena mikrostrip adalah antena yang banyak dikembangkan dalam berbagai aplikasi.Antena mikrostrip sangat menarik karena bebannya yang ringan, mudah disesuaikan bentuknya dan biayanya yang rendah. Pada komunikasi gelombang radio, diperlukan antena yang memiliki performansi bandwidth, frekuensi kerja, VSWR, Gain yang baik. Penelitian ini bertujuan untuk membuat rancangan antena mikrostrip berbentuk rectangular patch dengan frekuensi kerja 700 MHz untuk penerima televisi dengan parameter-parameter antena. Metode penelitian ini menggunakan simulasi CST Studio Suite 2018 untuk mendapatkan ukuran dimensi antena pada frekuensi kerja yang ditentukan. Hasil simulasi atau realisasi menunjukkan bahwa antena bekerja pada frekuensi 700 MHz menghasilkan VSWR 1.32, return loss -16.978, impedansi, bandwidth sebesar 11 MHz dan gain yang didapatkan sebesar 7.108 dB, Polaradiasi antena ini adalah directonal.

scholarly journals A Novel Circular Slotted Microstrip-Fed Patch Antenna with three Triangle Shape Defected Ground Structure for Multiband Applications

2018 ◽  
Vol 7 (3) ◽  
pp. 56-63 ◽  
Author(s):  
A. Jaiswal ◽  
R. K. Sarin ◽  
B. Raj ◽  
S. Sukhija
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Impedance Matching ◽  
Ground Plane ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Resonant Frequencies ◽  
Wireless Applications ◽  
Rectangular Patch ◽  
Miniaturized Antenna

In this paper, a novel circular slotted rectangular patch antenna with three triangle shape Defected Ground Structure (DGS) has been proposed. Radiating patch is made by cutting circular slots of radius 3 mm from the three sides and center of the conventional rectangular patch structure and three triangle shape defects are presented on the ground layer. The size of the proposed antenna is 38 X 25 mm2. Optimization is performed and simulation results have been obtained using Empire XCcel 5.51 software. Thus, a miniaturized antenna is designed which has three impedance bandwidths of 0.957 GHz,  0.779 GHz, 0.665 GHz with resonant frequencies at 3.33 GHz, 6.97 GHz and 8.59 GHz and the corresponding return loss at the three resonant frequencies are -40 dB, -43 dB and -38.71 dB respectively. A prototype is also fabricated and tested. Fine agreement between the measured and simulated results has been obtained. It has been observed that introducing three triangle shape defects on the ground plane results in increased bandwidth, less return loss, good radiation pattern and better impedance matching over the required operating bands which can be used for wireless applications and future 5G applications.

Circularly Polarized Rectangular Microstrip Patch Antenna with Finite Ground Plane

2015 ◽  
Vol 4 (2) ◽  
pp. 74
Author(s):  
Sanyog Rawat ◽  
Kamlesh Kumar Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Rectangular Patch

<p class="Abstract"><span style="font-weight: normal;">In this paper a new geometry of patch antenna is proposed with improved bandwidth and circular polarization. The radiation performance of circularly polarized rectangular patch antenna is investigated by applying IE3D simulation software and its performance is compared with that of conventional rectangular patch antenna.</span> <span style="font-weight: normal;">Finite Ground truncation technique is used to obtain the desired results. The simulated return loss, axial ratio and smith chart with frequency for the proposed antenna is reported in this paper. It is shown that by selecting suitable ground-plane dimensions, air gap and location of the slits, the impedance bandwidth can be enhanced upto 10.15 % as compared to conventional rectangular patch (4.24%) with an axial ratio bandwidth of 4.05%.</span></p><p> </p><p> </p>

scholarly journals Reduction of Mutual Coupling and Return Loss in Microstrip Array Antennas Using Concave Rectangular Patches

2010 ◽  
Vol 2010 ◽  
pp. 1-5 ◽  
Author(s):  
Shahram Mohanna ◽  
Ali Farahbakhsh ◽  
Saeed Tavakoli ◽  
Nasser Ghassemi
Keyword(s):  
Mutual Coupling ◽  
Return Loss ◽  
Array Antenna ◽  
Effective Solution ◽  
Rectangular Array ◽  
Rectangular Patch ◽  
Array Antennas ◽  
Microstrip Array ◽  
Patch Length ◽  
Microstrip Array Antenna

An effective solution to reduce both the mutual coupling and return loss of a microstrip array antenna consisting of rectangular patches is proposed. The patch is made concave in both horizontal and vertical sides. Applying the proposed structure to a microstrip array antenna having two elements, the effects of patch concavity on the mutual coupling and return loss are simulated and studied. To obtain a concave rectangular patch array antenna having low amounts of mutual coupling and return loss, the patch length and width as well as the amounts of concavities are optimized using an enhanced genetic algorithm. To verify the simulation results, then, the optimal array antenna is fabricated. The simulation and experimental results confirm that the optimal concave rectangular array antenna has low amounts of mutual coupling and return loss.

scholarly journals Metamaterial Loaded Rectangular Patch Antenna for Wireless Communication Application

2021 ◽  
Vol 9 (3) ◽  
pp. 193-197
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Negative Permittivity ◽  
Electromagnetic Analysis ◽  
Analysis Tool ◽  
Network Analyzer ◽  
Microstrip Patch ◽  
Rectangular Patch

In this paper, a metamaterial based compact multiband rectangular microstrip patch antenna is proposed. The return loss of metamaterial loaded microstrip patch antenna obtained at the resonant frequency 2.4GHz. The metamaterial structure printed on FR4 substrate at hight of 1.6mm from the ground plane. The FR4 substrate has 4.4 dielectric constant.These metamterial structures are periodic in nature and possesses negative permittivity and negative permeability. The greatest advantage of metamaterial loading will be miniaturization. This metamterial loaded rectangular patch antenna is simulated and tested using HFSS Simulator, where an electromagnetic analysis tool is used. The fabricated antennas results are measured using Vector Network Analyzer (VNA).

scholarly journals New Design of 60 GHz MIMO 2x4 Patch Rectangular Antenna Array for Wireless Gigabit (Wi-Gig) Application

2019 ◽  
Vol 2 (1) ◽  
pp. 6-9
Author(s):  
Yusnita Rahayu
Keyword(s):  
Return Loss ◽  
Simulation Software ◽  
Propagation Loss ◽  
60 Ghz ◽  
Broad Bandwidth ◽  
High Data ◽  
Rectangular Patch ◽  
Fifth Generation ◽  
The World ◽  
Indoor And Outdoor

Nowadays, most antenna researchers over the world are focusing on the design of the antenna for the fifth generation (5G) application (indoor and outdoor). High intensive research on 60 GHz antenna for high data rate indoor communication is becoming a trending topic. The high propagation loss at this band is the most challenging. The antenna needs to have higher gain to overcome the loss. Such antenna designs have been proposed recently. This paper, a new MIMO 2x4 patch rectangular antenna operating at 60 GHz is designed for Wi-Gig application. The rectangular patch antenna has 1.75 mm x 1.54 mm of size, printed on Rogers Duroid RT 5880 substrate, the dielectric constant of 2.20 and loss tangent of 0,0009. The antenna was designed and simulated using CST simulation software.  The simulated return loss showed a very consistent characteristic. The return loss reached −30 dB at 60 GHz.  The broad bandwidth obtained is 4.3 GHz concerning -10 dB. The omnidirectional radiation pattern with 13.4 dBi of gain is obtained. This antenna meets the Wi-Gig requirement.

scholarly journals Design and implementation of microstrip rotman lens for ISM band applications

2019 ◽  
Vol 8 (1) ◽  
pp. 90-98
Author(s):  
Mohammed K. Al-Obaidi ◽  
Ezri Mohd ◽  
Noorsaliza Abdullah ◽  
Samsul Haimi Dahlan ◽  
Jawad Ali
Keyword(s):  
Return Loss ◽  
Beam Steering ◽  
Center Frequency ◽  
Patch Antennas ◽  
Far Field ◽  
Frequency Bandwidth ◽  
Load Impedance ◽  
Ism Band ◽  
Design And Implementation ◽  
Rectangular Patch

This work presents the design and implementation of Rotman lens as a beam steering device for Industrial, Scientific, and Medical (ISM) applications. 2.45 GHz is considered as a center frequency design with (2-6) GHz frequency bandwidth. The beam steering is examined to cover ±21o scan angle with maximum main lobe magnitude 10.1 dBi, rectangular patch antennas are used as radiation elements to beam the output far field. The work is extended to compare between the tapered line which is used for matching between 50-Ω ports and lens cavity. CST microwave simulation studio results show that the rectangular taper line can yield 2 dB return loss less than linear taper line with a little bit shifting in responses for same input and load impedance.

scholarly journals Wearable Textile Patch Antenna for Medical Applications

2019 ◽  
Vol 9 (2S3) ◽  
pp. 44-47
Keyword(s):  
Dielectric Constant ◽  
Patch Antenna ◽  
Return Loss ◽  
Polyester Fabric ◽  
Slot Antenna ◽  
Wearable Antennas ◽  
Rectangular Patch ◽  
Denim Fabric ◽  
Conductive Textile ◽  
Rectangular Microstrip Antenna

In recent years of electronics industrialization, antennas are more popular components; wearable antennas play an important role due to their properties such as wireless communication and miniaturization. The design of wearable antennas have distinction in the area of antenna design and development, in this paper a thorough study had been carried out wearable antennas blended with textile, which has significant dielectric constant. This work describes the design a textile antenna, namely, a rectangular microstrip patch antenna and then rectangular with U-slot antenna with slits. After designing two kinds of antennas, a comparison will be made between their results. Conductive textile, a copper-plated polyester fabric, will be used for fabricating antenna radiators and grounds. An insulating denim fabric with dielectric constant 1.7 with a thickness of 0.7 is used for preparing the substrates. The proposed antenna is designed and all the results will calculated using Ansoft HFSS Software. After evaluating the results of a rectangular microstrip antenna and U-slot Antenna on textile substrate, the rectangular patch resonate at 2.5 GHz with the return loss of -16.86dB and the U-slot Antenna resonated at 2.2 GHz with return loss of -41.68dB and 3.9 GHz return loss of -16.16dB.

scholarly journals Design of Ultra Wideband Antenna

2020 ◽  
Vol 8 (5) ◽  
pp. 3988-3990
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Dielectric Substrate ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Rectangular Patch ◽  
Microstrip Feed

In this paper, A coplanar waveguide (CPW) ultra-wideband(UWB) antenna is designed, analyzed and simulated by computer simulation technology(CST). The proposed antenna is fabricated on FR-4 dielectric substrate. A microstrip feed line is used to excite the antenna.The ground plane is slotted to improve the impedance bandwidth (BW). Here, a rectangular patch is used as radiator and two corners out of four are truncated to improve impedance matching and UWB characterization.This antenna satisfies UWB characteristics like VSWR<2, Return loss(S11)<-10 dB,Gain<5dB and the antenna is operating within the frequency range of 1.59 to 11.87 GHz range which covers whole ultra wideband i.e. 3.1 to 10.6 GHz range.

scholarly journals DESIGN AND SIMULATION OF DIELECTRIC RESONATOR ANTENNA (DRA) WITH CO-AXIAL PROBE FOR WIRELESS APPLICATION

2020 ◽  
Vol 5 (2) ◽  
pp. 75-83
Author(s):  
Devansh Sinha ◽  
Mohit Vyas ◽  
Sanjay Singh Kushwah
Keyword(s):  
High Frequency ◽  
Dielectric Resonator ◽  
Return Loss ◽  
Ground Plane ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Frequency Bandwidth ◽  
Rectangular Patch ◽  
Wireless Application ◽  
Potential Parameters

In this paper a Dielectric resonator antenna (DRA) consists of a rectangular geometry and a printed rectangular patch on top of it in order to achieve better performance and operation without significant increase in antenna size. DRA structure is proposed at a height of 2 mm from the ground plane and patch incorporated at the height of 3.638 mm. This work is mainly focused on increasing the potential parameters of DRA and analyze high frequency band. The proposed antenna is designed to resonate at 25 GHz and by varying the DRA size ‘a, then the simulated results shows variation in Return Loss. The impedance bandwidth of the DRA (23.417 GHz-26.961 GHz) and return loss is 26.543951dB.The proposed DRA is analyzed and design using CST-MSW (2010). The simulated result shows the Far field, smith chart. We have estimated the wavelength, frequency, bandwidth, Return loss and directivity.                                      

scholarly journals Desain Antena Mikrostrip Rectangular Patch Array 1x2 dengan U-Slot Frekuensi 28 GHz

2019 ◽  
Vol 7 (1) ◽  
pp. 43
Author(s):  
FAJAR WAHYU ARDIANTO ◽  
SETYAWAN RENALDY ◽  
FARHAN FATHIR LANANG ◽  
TRASMA YUNITA
Keyword(s):  
Radiation Pattern ◽  
Return Loss ◽  
Network Capacity ◽  
Antenna Design ◽  
User Needs ◽  
Antenna Gain ◽  
Rectangular Patch ◽  
Narrow Bandwidth ◽  
Small Gain

ABSTRAKKebutuhan pengguna yang semakin meningkat harus diimbangi dengan peningkatan kecepatan data dan kapasitas suatu jaringan, sehingga diperlukan bandwidth yang lebar. 5G merupakan salah satu teknologi yang akan diresmikan tahun 2020 yang menjadi solusi terhadap peningkatan kecepatan data dan kapasitas layanan. Salah satu kandidat yang menjadi frekuensi kerja 5G yaitu 28 GHz. Antena mikrostrip merupakan salah satu jenis antena yang dapat digunakan untuk teknologi 5G. Namun, antena mikrostrip memiliki beberapa kekurangan, diantaranya bandwidth dan gain yang kecil. Untuk itu, dibutuhkan teknik yang dapat meningkatkan bandwidth dan gain antena. Pada penelitian ini dirancang antena mikrostrip bentuk rectangular patch yang ditambahkan slot berbentuk U dengan tujuan meningkatkan bandwidth dan disusun secara array 1×2 untuk meningkatkan gain antena. Hasil dari simulasi didapatkan antena mampu bekerja pada rentang frekuensi 27,5 GHz – 29,12 GHz pada batas return loss kurang dari -15 dB dengan bandwidth sebesar 1,62 GHz. Nilai gain yang dihasilkan sebesar 7,52 dB. Pola radiasi yang dihasilkan, yaitu unidireksional dan berpolarisasi secara linear.Kata kunci: 5G, 28 GHz, mikrostrip, rectangular patch, array, U-Slot ABSTRACTData rate and network capacity improvements offset the increase of user needs, hence it requires a wider bandwidth. The most current high-end technology, which can solve the problem is 5G. One of the frequency that becomes the candidate of 5G is 28 GHz. For 5G, it could apply one of the antenna types, micro strip antenna. However, micro strip antenna has a shortage of narrow bandwidth and small gain. Therefore, it requires a technique to increase the bandwidth and gain of the antenna. In this study, the form of micro strip of antenna design is a rectangular patch with the addition of U-Slot and arranged 1x2 to increase the bandwidth and antenna gain. The results of the simulation show that the antenna is working well at the range frequency of 27.5 GHz - 29.12 GHz, with a return loss limit of -15 dB with bandwidth of 1.62 GHz, the resulting gain value is 7.52 dB, the resulting radiation pattern is unidirectional and linearly polarized.Keywords: 5G, 28 GHz, microstrip, rectangular patch, array, U-Slot

Sign in / Sign up

Export Citation Format

Share Document