scholarly journals Laboratory Model Tests on Stone Column and Pervious Concrete Columns: A Comparative Study

2021 ◽  
Vol 12 (1) ◽  
pp. 75-89
Author(s):  
Jignesh Patel ◽  
Chandresh Solanki ◽  
Yogendra Tandel ◽  
Bhavin Patel
Keyword(s):  
Carrying Capacity ◽  
Deformation Behavior ◽  
Concrete Columns ◽  
Model Tests ◽  
Pervious Concrete ◽  
Stone Columns ◽  
Stone Column ◽  
Laboratory Model ◽  
Load Carrying Capacity ◽  
Load Carrying

This study aims to perform laboratory model tests to investigate the load-deformation behavior of stone columns (SCs), pervious concrete columns (PCCs), and composite columns (CCs). Here, CC refers to the column which has the upper portion made of PCC and the lower portion made of SC. The parameters investigated in this study include column diameters, column lengths, and installation methods (pre-cast and cast-in-situ methods). The results of the model tests reveal that the axial load-carrying capacity of PCC is nearly 8 times more than that of SC with the same diameter. Moreover, it is also observed that at the top portion of SC, with the PCC length which is about 3.75 to 5 times the column diameter, the load-carrying capacity can significantly increase. It is concluded that the installation methods have marginal influence on the load-deformation behavior of PCC.

scholarly journals Laboratory Experimental Analysis on Encapsulated Stone Column

2013 ◽  
Vol 59 (3) ◽  
pp. 359-379 ◽  
Author(s):  
Y.K. Tandel ◽  
C.H. Solanki ◽  
A.K. Desai
Keyword(s):  
Carrying Capacity ◽  
Soft Soil ◽  
Stone Columns ◽  
Stone Column ◽  
Radial Deformation ◽  
Load Carrying Capacity ◽  
Column Length ◽  
Confinement Pressure ◽  
Load Carrying ◽  
Lower Load

Abstract The application of stone column technique for improvement of soft soils has attracted a considerable attention during the last decade. However, in a very soft soil, the stone columns undergo excessive bulging, because of very low lateral confinement pressure provided by the surrounding soil. The performance of stone column can be improved by the encapsulation of stone column by geosynthetic, which acts to provide additional confinement to columns, preventing excessive bulging and column failure. In the present study, a detailed experimental study on behavior of single column is carried out by varying parameters like diameter of the stone column, length of stone column, length of geosynthetic encapsulation and stiffness of encapsulation material. In addition, finite-element analyses have been performed to access the radial deformation of stone column. The results indicate a remarkable increase in load carrying capacity due to encapsulation. The load carrying capacity of column depends very much upon the diameter of the stone column and stiffness of encapsulation material. The results show that partial encapsulation over top half of the column and fully encapsulated floating column of half the length of clay bed thickness give lower load carrying capacity than fully encapsulated end bearing column. In addition, radial deformation of stone column decreases with increasing stiffness of encapsulation material.

Influence of positions of the geotextile on the load-settlement behaviour of circular footing resting on single stone column by 2D Plaxis software

2021 ◽  
Vol 2 (107) ◽  
pp. 59-74
Author(s):  
J.S. Yadav ◽  
K. Kumar ◽  
R.K. Dutta ◽  
A. Garg
Keyword(s):  
Carrying Capacity ◽  
Stone Columns ◽  
Stone Column ◽  
Load Carrying Capacity ◽  
Weak Soil ◽  
Load Carrying ◽  
Column Design ◽  
Practical Implications ◽  
Settlement Behaviour ◽  
Circular Footing

Purpose: This study aims to study the load – settlement behaviour of circular footing rested on encased single stone column. Design/methodology/approach: The effect of vertical, horizontal and combined verticalhorizontal encasement of stone column on the load carrying capacity were examined numerically. The effect of stone column dimension (80 mm and 100 mm), length (400 mm and 500 mm), and spacing of reinforcement on the load carrying capacity and reinforcement ratio were assessed. Findings: The obtained results revealed that the load carrying capacity of geotextile encased stone columns are more than ordinary stone columns. For vertically encased stone columns as the diameter increases, the advantage of encasement decreases. Whereas, for horizontally encased stone column and combined vertical- horizontal encased stone column, the performance of encasement intensifies as the diameter of stone column increases. The improvement in the load carrying capacity of clay bed reinforced with combined verticalhorizontal encased stone columns are higher than vertical encased stone columns or horizontal encased stone column. The maximum performance of encasement was observed for VHESC1 of D = 80 mm. Research limitations/implications: For this study, the diameter of footing and stone column was kept same. The interface strength factor between stone column and clay bed was not considered. Practical implications: The encased stone column could be use improve the laod bearing capacity of weak soils. Originality/value: Many studies are available in literature regarding use of geosynthetic as vertical encasement and horizontal encasement of stone column. The study on combined effect of vertical and horizontal encasement of stone column on load carrying capacity of weak soil is very minimal. Keeping this in view, the present work was carried out.

Experimental Study on Mechanical Properties of Axially Loaded PVC Tubed Short Concrete Columns

2011 ◽  
Vol 99-100 ◽  
pp. 715-718 ◽  
Author(s):  
Jun Dong ◽  
De Ping Chen ◽  
Ju Mei Zhao ◽  
De Shan Shan ◽  
Xin Yue Liu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carrying Capacity ◽  
Loading Condition ◽  
Concrete Strength ◽  
Concrete Columns ◽  
Load Carrying Capacity ◽  
Composite Columns ◽  
Load Carrying ◽  
Strength And Deformation ◽  
Axially Loaded

Twelve PVC tubed short concrete columns and four columns without PVC tube confined were tested under axial load to investigate mechanical properties of axially loaded PVC tubed short concrete columns . The principal influencing factors such as concrete strength, loading condition and ratio of height to diameter were studied. Test results indicated that strength and deformation performance of core concrete increased as a result of the confinement of PVC tube. The PVC tube confinement effect on concrete will decrease with an increase in strength of concrete. Load- carrying capacity and deformation of short composite columns with different loading condition made some difference. As the ratio of height to diameter increases, load- carrying capacity and plasticity of short composite columns decreased gradually.

Load-Carrying Capacity of Second-Growth Douglas-Fir Stump Anchors

1987 ◽  
Vol 2 (3) ◽  
pp. 77-80 ◽  
Author(s):  
Marvin R. Pyles ◽  
Joan Stoupa
Keyword(s):  
Carrying Capacity ◽  
Deformation Behavior ◽  
Ultimate Load ◽  
Douglas Fir ◽  
Load Carrying Capacity ◽  
Test Results ◽  
Tree Diameter ◽  
Second Growth ◽  
Load Carrying ◽  
Load Tests

Abstract In order to quantify the stump anchor capacity of small second-growth Douglas-fir (Pseudotsuga menziesii [Mirb]. Franco) trees, load tests to failure were conducted on 18 stumps from trees 7 to 16.5 in dbh. The tests produced ultimate loads that varied as the square of the tree diameter. However, the ultimate load typically occurred at stump system deformations that were far in excess of that which would be considered failure of a stump anchor. A hyperbolic equation was used to describe the load-deformation behavior of each stump tested and was generalized to describe all the test results. West. J. Appl. For. 2(3):72-80, July 1987.

scholarly journals Influence of ties on the behavior of short reinforced concrete columns strengthened by external CFRP

2018 ◽  
Vol 162 ◽  
pp. 04005
Author(s):  
Kaiss Sarsam ◽  
Raid Khalel ◽  
Mohammed Hadi
Keyword(s):  
Carrying Capacity ◽  
Concrete Columns ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Load Carrying Capacity ◽  
Cfrp Sheets ◽  
Reinforced Polymer ◽  
Load Carrying ◽  
The Difference ◽  
Normal Strength

An experimental study was carried out to investigate the behavior of normal strength reinforce concret (RC) circular short column strengthned with “carbon fiber reinforced polymer (CFRP) sheets”. Three series comprising totally of (15) specimens loaded until failure under concentric compresion load. Strengthening was varied by changing the number of CFRP strips, spacing and wrapping methods. The findings of this research can be summarized as follows: for the columns without CFRP, the influence of the tie spacing was significant: compared with 130 mm tie spacing, dropping the spacing to 100 mm and 70 mm increased the load carrying capacity by 18% and 26%, respectively. The columns with less internal confinement (lesser amount of ties) were strengthened more significantly by the CFRP than the ones with greater amount of internal ties. As an example of the varying effectiveness of the fully wrapped CFRP, the column with ties at 130 mm was strengthened by 90% with the CFRP. In contrast, the ones with 70 mm spaced ties only increased in strength with CFRP by 66%. Compared with the control specimen (no CFRP), the same amount of CFRP when used as hoop strips led to more strengthening than using CFRP as a spiral strip- the former led to nearly 9% more strengthening than the latter in the case of 130 mm spaced internal steel ties. In the case of 100 mm internal steel ties, the difference (between the hoops & spiral CFRP strengthening) is close to 4%. In contrast, there is no difference between the two methods of strengthening in the heavily tied columns (70 mm tied spacing).

scholarly journals 3D FE Analysis of an Embankment Construction on GRSC and Proposal of a Design Method

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Yogendra K. Tandel ◽  
Chandresh H. Solanki ◽  
Atul K. Desai
Keyword(s):  
Carrying Capacity ◽  
Design Method ◽  
Soft Clay ◽  
Deformation Modulus ◽  
Diameter Ratio ◽  
Major Influence ◽  
Stone Column ◽  
Load Carrying Capacity ◽  
Lateral Deformation ◽  
Load Carrying

Stone column is often employed for strengthening of an embankment seated on deep soft clay. But in very soft clay having undrained shear strength less than or equal to 15 kPa, stone column may not derive adequate load carrying capacity and undergo large lateral deformation due to inadequate lateral confinement. In such circumstances, reinforcement to individual stone column by geosynthetics enhances load carrying capacity and reduces lateral deformation. This paper addresses parametric study on behaviour of embankment resting on Geosynthetic Reinforced Stone Column (GRSC) considering parameters such as stone column spacing to diameter ratio, deformation modulus of stone column material, geosynthetic stiffness, thickness of soft clay, and height of embankment by 3D numerical analysis. Finally, equation for Settlement Improvement Factor (SIF), defined as ratio between settlement of embankment without treatment and with geosynthetic reinforced stone column, is proposed that correlates with the major influence parameters such as stone column spacing to diameter ratio, deformation modulus of soft clay, and geosynthetic stiffness.

scholarly journals Load-Carrying Capacity of Short Concrete Columns Reinforced with Glass Fiber Reinforced Polymer Bars Under Concentric Axial Load

2019 ◽  
Vol 9 (2) ◽  
pp. 1712-1719
Keyword(s):  
Carrying Capacity ◽  
Load Capacity ◽  
Plain Concrete ◽  
Concrete Columns ◽  
Reinforcement Ratio ◽  
Load Carrying Capacity ◽  
Rc Columns ◽  
Gfrp Bars ◽  
Glass Fiber Reinforced ◽  
Load Carrying

In this paper, 1 group of plain concrete square columns 150×150×600 mm and 11 groups of concrete columns reinforced with glass fiber reinforced polymer (GFRP) were cast and tested, each group contains of 3 specimens. These experiments investigated effect of the main reinforcement ratio, stirrup spacing and contribution of longitudinal GFRP bars on the load carrying capacity of GFRP reinforced concrete (RC) columns. Based on the experiment results, the relationship between load-capacity and reinforcement ratio and the plot of contribution of longitudinal GFRP bars to load-capacity versus the reinforcement ratio were built and analyzed. By increasing the reinforcement ratio from 0.36% to 3.24%, the average ultimate strain in columns at maximum load increases from 2.64% to 75.6% and the load-carrying capacity of GFRP RC columns increases from 3.4% to 25.7% in comparison with the average values of plain concrete columns. Within the investigated range of reinforcement ratio, the longitudinal GFRP bars contributed about 0.72%-6.71% of the ultimate load-carrying capacity of the GFRP RC columns. Meanwhile, with the same configuration of reinforcement, contribution of GFRP bars to load-carrying capacity of GFRP RC columns decreases when increasing the concrete strength. The influence of tie spacing on load-carrying capacity of reinforced columns was also taken into consideration. Additionally, experimental results allow us to propose some modifications on the existing formulas to determine the bearing capacity of the GFRP RC column according to the compressive strength of concrete and GFRP bars.

scholarly journals Experimental Investigations of Concrete Filled Battened Steel Columns of Different Slenderness

2019 ◽  
Vol 65 (4) ◽  
pp. 3-19
Author(s):  
M. Siennicki
Keyword(s):  
Carrying Capacity ◽  
Concrete Columns ◽  
Experimental Investigations ◽  
Load Carrying Capacity ◽  
Design Standards ◽  
Steel Columns ◽  
Load Carrying ◽  
Bare Steel ◽  
Concrete Filling ◽  
Full Scale Tests

AbstractThe study investigates the axial load behaviour of concrete filled battened steel columns not covered by the design standards. A series of full scale tests on two I-sections connected together with intermediate batten plates and filled with concrete were carried out. The main parameters varied in the tests are length of the members and strength of the concrete filling. One bare steel member was also tested and results were compared with those filled with concrete. The tests results were illustrated by load-strain curves. The main objectives of these tests were twofold: first, to describe behaviour of new steel-concrete columns and second, to analyze the influence of slenderness on load-carrying capacity.

Sign in / Sign up

Export Citation Format

Share Document