scholarly journals Optimal Sizing of a Pv-Wind Hybrid System Using Measured and Generated Database

2021 ◽  
Vol 03 (01) ◽  
pp. 34-44
Author(s):  
Abdellah Benallal ◽  
◽  
Nawel Cheggaga ◽  
Keyword(s):  
Renewable Energy ◽  
Wind Speed ◽  
Wind Turbine ◽  
Hybrid Systems ◽  
Hybrid System ◽  
Measured Data ◽  
Electrical Load ◽  
Wind Potential ◽  
Simulation Results ◽  
The Cost

Renewable energy hybrid systems give a good solution in isolated sites, in the Algerian desert; wind and solar potentials are considerably perfect for a combination in a renewable energy hybrid system to satisfy local village electrical load and minimize the storage requirements, which leads to reduce the cost of the installation. For a good sizing, it is essential to know accurately the solar potential of the installation area also wind potential at the same height where wind electric generators will be placed. In this work, we optimize a completely autonomous PV-wind hybrid system and show the techno-economical effects of the height of the wind turbine on the sizing of the hybrid system. We also compare the simulation results obtained from using wind speed measured data at 10 meters and 40 meters of height with the ones obtained from using wind speed extrapolation on HOMER software.

scholarly journals STUDI EKSPERIMENTAL PERFORMANSI TURBIN SAVONIUS DI PESISIR PANTAI KABUPATEN DEMAK TERHADAP DAYA LISTRIK YANG DIHASILKAN

2021 ◽  
Vol 14 (1) ◽  
pp. 16
Author(s):  
Wahyu Santoso ◽  
Herman Saputro ◽  
Husin Bugis
Keyword(s):  
Renewable Energy ◽  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Raw Material ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Generator Type ◽  
Wind Potential ◽  
Savonius Wind Turbine

<p><em>Energy from fossil fuels consisting of petroleum, coal, natural gas containing raw material for energy fulfillment in Indonesia is still very central through the use of raw materials from renewable energy is still very low. In Indonesia the potential for renewable energy such as wind energy needs to be optimized. One of the uses of wind energy is through savonius wind turbine as electricity generators. Characteristics of savonius wind turbine with vertical axis rotors which gave a simple shape, and that able to control low speeds. This is in accordance with regions in Indonesi which have low average speeds.         This experimental study, aims to determine the description of wind potential and determine the performance of savonius wind turbines on the coast of Demak regency on the electrical energy produced. Savonius wind turbine used is made of galvalum material in the form of an S type rotor with diameter 1.1 m and height 1.4 m, using pulley transmission system with multiplication ratio 1:6 dan using generator type PMG 200 W. This research uses the method experiment. Data collection in the form of wind speed, humidity, temperature, rotor rotation speed, voltage and electric curret is carried out at 14.30 to 17.30 Western Indonesian Time. Data Analysis in this study uses quantitative descriptive analysis. The result showed the potential of wind on the coast of Demak regency have an average wind speed of 2,02 m/s with a temperature of 31</em><em>,</em><em>34 </em><em><sup>0</sup></em><em>C and humidity of 76,96. And the performance of the installed wind turbine produces the highest power 3.5 watt with an electric power coefficient of 0,181 and tip speed ratio around 1,75. From these result, the potensial of wind with performance savonius turbine can generate electricity used for pond lighting in the village Berahan Kulon Kecamatan Wedung. </em><em></em></p>

Pre-Feasibility Study and Unit Sizing of Hybrid Renewable Energy System for a Global System for Mobile Communications (GSM) Station in Tabriz, Iran

2020 ◽  
Author(s):  
Reza Amini ◽  
Mohammad Pourgol Mohammad
Keyword(s):  
Renewable Energy ◽  
Fuel Cells ◽  
Fuel Cell ◽  
Wind Speed ◽  
Wind Turbine ◽  
Hybrid System ◽  
Energy Resources ◽  
Feasibility Analysis ◽  
Renewable Energy Resources ◽  
Hybrid Renewable Energy System

Abstract This research, a part of more extensive research, presents pre-feasibility and unit sizing analysis of a hybrid system equipped with renewable energy resources in Tabriz, Iran (46°26/E, 38°06/N). This case study examines a GSM telecommunication station as a stand-alone load system. Renewable energy resources include photovoltaic (PV), a wind turbine as primary resources and fuel cell, and a battery stack as backup and energy storage systems, while an electrolyzer is used to provide the required hydrogen in the fuel cell system. Feasibility analysis and unit sizing are conducted based on climatic data such as solar irradiance and wind speed to derive an optimal model during the study. HOMER software is used to simulate the feasibility analysis, measure the size, and optimize the system. The results showed that the hybrid system performs cost-effectively. According to wind energy data and fuel-cell costs, sensitivity analysis is conducted. The load is a stand-alone GSM station that consumes 60kW per day with a maximum of 3.8kW per hour. This analysis showed that wind, PV, electrolyzer, battery, and fuel cells are not currently the best solutions. Shortly, according to improved prediction in fuel-cell technology, it is expected that this source as a backup will be the best option because it has decreased fuel-cell costs up to 65 percent. Some criteria such as size, application, and cost, have been mainly examined. These results provide excellent opportunities for this hybrid system. The result shows using fuel cells in a hybrid system is not affordable by considering current fuel cell price, and the main suggestion hybrid system configuration is PV, wind turbine, and battery, while for the nearby location of Tabriz by decreasing wind speed, using wind turbines is not feasible and more PV array should be added to the system.

Wind Turbine Aerodynamic Braking System Analysis Using Chord Wise Spacing

2015 ◽  
Vol 787 ◽  
pp. 217-221 ◽  
Author(s):  
B. Navin Kumar ◽  
K.M. Parammasivam
Keyword(s):  
Renewable Energy ◽  
Wind Turbine ◽  
Wind Velocity ◽  
Turbine Blade ◽  
Wind Turbines ◽  
Renewable Energy Sources ◽  
Energy Resource ◽  
Braking System ◽  
Extreme Wind ◽  
Wind Potential

Wind energy is one of the most significant renewable energy sources in the world. It is the only promising renewable energy resource that only can satisfy the nation’s energy requirements over the growing demand for electricity. Wind turbines have been installed all over the wind potential areas to generate electricity. The wind turbines are designed to operate at a rated wind velocity. When the wind turbines are exposed to extreme wind velocities such as storm or hurricane, the wind turbine rotates at a higher speed that affects the structural stability of the entire system and may topple the system. Mechanical braking systems and Aerodynamic braking systems have been currently used to control the over speeding of the wind turbine at extreme wind velocity. As a novel approach, it is attempted to control the over speeding of the wind turbine by aerodynamic braking system by providing the chord wise spacing (opening). The turbine blade with chord wise spacing alters the pressure distribution over the turbine blade that brings down the rotational speed of the wind turbine within the allowable limit. In this approach, the over speeding of the wind turbine blades are effectively controlled without affecting the power production. In this paper the different parameters of the chord wise spacing such as position of the spacing, shape of the spacing, width of the spacing and impact on power generation are analyzed and the spacing parameters are experimentally optimized.

scholarly journals Dynamic response improvement of hybrid system by implementing ANN-GA for fast variation of photovoltaic irradiation and FLC for wind turbine

2015 ◽  
Vol 64 (2) ◽  
pp. 291-314 ◽  
Author(s):  
Maziar Izadbakhsh ◽  
Alireza Rezvani ◽  
Majid Gandomkar
Keyword(s):  
Fuzzy Logic ◽  
Wind Speed ◽  
Dynamic Response ◽  
Wind Turbine ◽  
Hybrid System ◽  
Pitch Angle ◽  
Fuzzy Logic Controller ◽  
Control Method ◽  
Control Technique ◽  
Power Curves

Abstract In this paper, dynamic response improvement of the grid connected hybrid system comprising of the wind power generation system (WPGS) and the photovoltaic (PV) are investigated under some critical circumstances. In order to maximize the output of solar arrays, a maximum power point tracking (MPPT) technique is presented. In this paper, an intelligent control technique using the artificial neural network (ANN) and the genetic algorithm (GA) are proposed to control the MPPT for a PV system under varying irradiation and temperature conditions. The ANN-GA control method is compared with the perturb and observe (P&O), the incremental conductance (IC) and the fuzzy logic methods. In other words, the data is optimized by GA and then, these optimum values are used in ANN. The results are indicated the ANN-GA is better and more reliable method in comparison with the conventional algorithms. The allocation of a pitch angle strategy based on the fuzzy logic controller (FLC) and comparison with conventional PI controller in high rated wind speed areas are carried out. Moreover, the pitch angle based on FLC with the wind speed and active power as the inputs can have faster response that lead to smoother power curves, improving the dynamic performance of the wind turbine and prevent the mechanical fatigues of the generator

Numerical Simulation of Dynamics of a Spar Type Floating Wind Turbine and Comparison With Laboratory Measurements

2016 ◽  
Author(s):  
Hyunseong Min ◽  
Cheng Peng ◽  
Fei Duan ◽  
Zhiqiang Hu ◽  
Jun Zhang
Keyword(s):  
Numerical Simulation ◽  
Wind Speed ◽  
Numerical Simulations ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Deep Water ◽  
Offshore Wind ◽  
Wind Loads ◽  
Floating Offshore Wind Turbines ◽  
The Cost

Wind turbines are popular for harnessing wind energy. Floating offshore wind turbines (FOWT) installed in relatively deep water may have advantages over their on-land or shallow-water cousins because winds over deep water are usually steadier and stronger. As the size of wind turbines becomes larger and larger for reducing the cost per kilowatt, it could bring installation and operation risks in the deep water due to the lack of track records. Thus, together with laboratory tests, numerical simulations of dynamics of FOWT are desirable to reduce the probability of failure. In this study, COUPLE-FAST was initially employed for the numerical simulations of the OC3-HYWIND, a spar type platform equipped with the 5-MW baseline wind turbine proposed by National Renewable Energy Laboratory (NREL). The model tests were conducted at the Deepwater Offshore Basin in Shanghai Jiao Tong University (SJTU) with a 1:50 Froude scaling [1]. In comparison of the simulation using COUPLE-FAST with the corresponding measurements, it was found that the predicted motions were in general significantly smaller than the related measurements. The main reason is that the wind loads predicted by FAST were well below the related measurements. Large discrepancies are expected because the prototype and laboratory wind loads do not follow Froude number similarity although the wind speed was increased (or decreased) in the tests such that the mean surge wind force matched that predicted by FAST at the nominal wind speed (Froude similarity) in the cases of a land wind turbine [1]. Therefore, an alternative numerical simulation was made by directly inputting the measured wind loads to COUPLE instead of the ones predicted by FAST. The related simulated results are much improved and in satisfactory agreement with the measurements.

Technical and Economic Evaluation of Hybrid wind/PV/Battery Systems for Off-Grid Areas using HOMER Software

2016 ◽  
Vol 7 (1) ◽  
pp. 134 ◽  
Author(s):  
Alireza Gheiratmand ◽  
Reza Effatnejad ◽  
Mahdi Hedayati
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Hybrid Systems ◽  
Hybrid System ◽  
Low Cost ◽  
Electrical Energy ◽  
Petroleum Products ◽  
Medical Emergency ◽  
Technological Advances ◽  
Economical Consideration

Incremental consumption of electrical energy, reduction of fossil fuel resources and environmental pollution problems caused by them are the main reasons, which tend the managers and officials in countries energy sector to develop use of renewable systems. In the not-too-distant future the use of renewable energy such as wind and solar will be very important and will play predominant role in economic indices of power systems. In recent years, technological advances in renewable energy and increasing price of petroleum products promote system managers to use low-cost and low-emission energy resources in form of hybrid systems and widespread propagation of electricity generation have been developed in remote areas. In Hybrid systems two or more sources of renewable energy is typically adopted, which increases the reliability of these systems. In this paper, the technical and economical consideration of a wind and solar hybrid system to supply electrical energy for a number of remote users (aid and medical emergency Shelter in Yazd) is provided. In order to investigate optimization and economic analysis of the proposed hybrid system, the HOMER software is used.  The results of Simulation in HOMER software show that Solar cells and wind systems with average generation power of 896 kWh/yr. and 343 kWh/yr., consist proportion of 72 and 28 percent of the total generated energy respectively, which are dedicated to satisfy the loads

scholarly journals ANALISIS KELAYAKAN TURBIN ANGIN KECEPATAN RENDAH TIPE NT1000W DI WILAYAH TERPENCIL

2019 ◽  
Vol 10 (1) ◽  
pp. 84-93
Author(s):  
Redaksi Tim Jurnal
Keyword(s):  
Renewable Energy ◽  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Electrical Energy ◽  
Remote Communities ◽  
Low Speed ◽  
Energy Needs ◽  
One Step ◽  
Research Studies

This research discusses the fulfillment of the electricity needs of remote communities that are closely related to electrification ratios. Electrification ratios in some isolated areas and scattered islands in Indonesia are still very low. To date, most of the electricity needs in Indonesia is still supplied by Diesel Power Electricity Generator (PLTD) which uses diesel as its fuel. Therefore, it is necessary the utilization of renewable energy as one step to fulfill the electrical energy needs. This research studies about the utilization of wind energy with PLTB by using low speed wind turbine to fulfill the electricity needs of remote communities and scattered islands in Indonesia. NT1000W is the latest technology of low speed wind turbine that can operate at wind speed of 1 m/d up to 60 m/d appropriate to the wind conditions in Indonesia. Testing conducted in west Sumatera particularly in Padang city and Kapo-Kapo Island provide a feasibility of PLTB NT1000W technically and financially.

scholarly journals Evaluation of Wind Potential for the Generation of Electricity in Aliero, Kebbi State

2020 ◽  
pp. 1-7
Author(s):  
A. A. Yahaya ◽  
I. M. Bello ◽  
N. Mudassir ◽  
I. Mohammed ◽  
M. I. Mukhtar
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Power ◽  
Power Density ◽  
Horizontal Wind ◽  
Average Wind Speed ◽  
Wind Power Density ◽  
North East ◽  
Average Wind ◽  
Wind Potential

One of the major developments in the technology today is the wind turbine that generates electricity and feed it directly to the grid which is used in many part of the world. The main purpose of this work is to determine the wind potential for electricity generation in Aliero, Kebbi state. Five years Data (2014-2018) was collected from the metrological weather station (Campell Scientific Model), the equipment installed at Kebbi State University of Science And Technology Aliero The data was converted to monthly and annual averages, and compared with the threshold average wind speed values that can only generate electricity in both vertical and horizontal wind turbines. The highest average wind speed 2.81 m/s was obtained in the month of January and the minimum average wind speed of 1.20 m/s in the month of October. Mean annual wind speed measured in the study area shows that there has been an increase in the wind speed from 2014 which peaked in 2015 and followed by sudden decrease to a minimum seasonal value in the year 2016. The highest wind direction is obtained from the North North-East (NNE) direction. From the results of wind power density it shows that we have highest wind power density in month of January and December with  0.8635 w/ m2 and 0.8295 w/ m2 respectively, while lowest wind power density in the month of October and September with 0.6780 w/ m2 and 0.6575 w/ m2  respectively. Result of the type Wind Turbine to be selected in the study area shows that the site is not viable for power generation using a horizontal wind turbine but the vertical wind turbine will be suitable for the generation of electricity.

scholarly journals A Techno-Economic Model for Wind Energy Costs Analysis for Low Wind Speed Areas

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1463 ◽  
Author(s):  
Kehinde A. Adeyeye ◽  
Nelson Ijumba ◽  
Jonathan S. Colton
Keyword(s):  
Renewable Energy ◽  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Economic Model ◽  
African Continent ◽  
Financial Return ◽  
Levelized Cost Of Electricity ◽  
Low Wind Speed ◽  
Ferris Wheel

The global population is moving away from fossil fuel technologies due to their many disadvantages, such as air pollution, greenhouse gases emission, global warming, acid rain, health problems, and high costs. These disadvantages make fossil fuels unsustainable. As a result, renewable energy is becoming more attractive due to its steadily decreasing costs. Harnessing renewable energy promises to meet the present energy demands of the African continent. The enormous renewable energy potential available across the African continent remains largely untapped, especially for wind energy. However, marginal and fair wind speeds and power densities characterize African wind energy resulting in low and unsustainable power in many areas. This research develops a techno-economic model for wind energy cost analysis for a novel, Ferris wheel-based wind turbine. The model is used to techno-economically analyze the siting of wind turbine sites in low wind speed areas on the African continent. The wind turbine’s technical performance is characterized by calculating the annual energy production and the capacity factor using the wind Weibull probability distribution of the cities and theoretical power curve of the wind turbine. Its economic performance is evaluated using annualized financial return on investment, simple payback period, and levelized cost of electricity. The techno-economic model is validated for 21 African cities and shows that the Ferris wheel-based design is very competitive with four current, commercial wind turbines, as well as with other sources of energy. Hence, the new wind turbine may help provide the economical, clean, renewable energy that Africa needs.

Sign in / Sign up

Export Citation Format

Share Document