scholarly journals Effects of Assistance of High Frequency Dielectric and Infrared Heating on Vacuum Freeze Drying Characteristics of Food Model

2018 ◽  
Author(s):  
Atsushi Hashimoto ◽  
Ken-ichiro Suehara ◽  
Takaharu Kameoka ◽  
Kazuhiko Kawamura
Keyword(s):  
Electromagnetic Wave ◽  
Sodium Chloride ◽  
High Frequency ◽  
Freeze Drying ◽  
Infrared Heating ◽  
Drying Time ◽  
Drying Characteristics ◽  
Additive Component ◽  
Wave Heating ◽  
Food Model

By combining vacuum freeze drying combined with high-frequency dielectric and/or infrared heating, the drying time for frozen gels containing 1% agar with sucrose or sodium chloride was successfully shorten, and the drying time was influenced by the heating methods and by the additive component to the sample. Additionally, it was experimentally confirmed that the power consumption for freeze drying combined with electromagnetic wave heating could be reduced because of the shortened drying time. Consequently, this study could be a very important step for designing a vacuum freeze drying process optimally combining electromagnetic wave heating for each sample component.Keywords: freeze drying, electromagnetic wave heating, food model, sucrose, sodium chloride

scholarly journals Effect of Hot-Water Blanching Pretreatment on Drying Characteristics and Product Qualities for the Novel Integrated Freeze-Drying of Apple Slices

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Hai-ou Wang ◽  
Qing-quan Fu ◽  
Shou-jiang Chen ◽  
Zhi-chao Hu ◽  
Huan-xiong Xie
Keyword(s):  
Electron Microscopy ◽  
Freeze Drying ◽  
Hot Water ◽  
The Novel ◽  
Rehydration Ratio ◽  
Drying Time ◽  
Drying Characteristics ◽  
Promising Alternative ◽  
Freeze Dried ◽  
Apple Slices

The effect of hot-water blanching (HWB) on drying characteristics and product qualities of dried apple slices with the novel integrated freeze-drying (NIFD) process was investigated by comparing with 3 different FD methods. Compared with the NIFD process without HWB pretreatment (VF-FD), the NIFD process with HWB pretreatment (HWB-VF-FD) resulted in a significantly higher mass loss and more sufficient freezing in vacuum-frozen samples, significantly higher rehydration ratio (RR), higher shrinkage ratio (SR), smaller Vitamin C (VC) content and lower hardness and better apparent shape in freeze-dried samples, and fewer change to the color of the dried or rehydrated samples (p<0.05). Compared with the conventional FD process with HWB pretreatment (HWB-PF-FD), HWB-VF-FD cost significantly less processing time and FD time and obtained significantly higher RR (p<0.05), almost the equivalent SR, VC content, and hardness, and similar appearance in dried samples. The microstructure of apple cell tissues was analyzed by transmission electron microscopy and scanning electron microscopy to interpret the above differences in drying characteristics and product qualities. The results suggested that the NIFD process of apple slices with HWB pretreatment was a promising alternative method to decrease drying time, achieve similar product quality, and simplify the process steps of the conventional FD technology.

scholarly journals Examination of physical properties of final product and drying properties of combined (convective pre-drying and freeze finish-drying) dehydration method

2014 ◽  
pp. 5-12
Author(s):  
Tamás Antal
Keyword(s):  
Freeze Drying ◽  
Operating Conditions ◽  
Small Scale ◽  
Case Hardening ◽  
Degree Polynomial ◽  
Hot Air Drying ◽  
Drying Time ◽  
Drying Characteristics ◽  
Hot Air ◽  
Drying Properties

In this study, the effects of freeze drying (FD), hot-air drying (HAD) and combined drying (HAD-FD) on drying characteristics, energy uptake, texture, rehydration and color of carrot were investigated. Results showed that HAD-FD significantly improved the drying time compared with FD under the same operating conditions, and the HAD-FD can reduce the total cost of dehydration. The drying kinetics was described by the Henderson-Pabis and the third degree polynomial models in the case of HAD, FD and HAD-FD. The HAD carrot samples were exhibited shrinkage, case hardening, poor rehydration and brown surface. The FD carrot cubes appeared porous structure, excellent rehydration, soft texture and loose color. The HAD-FD samples were superior to HAD products and was nearer in quality to FD products with respect to appearance, rehydration and surface resistance (texture). Finally, it is concluded that HAD-FD is effective in improving the FD drying rate. However, the combined drying has a small-scale adverse effect on product quality.

Drying characteristics and product quality of whole blueberry pulp in vacuum drying process

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Lijuan Zhao ◽  
Yonghuan Li ◽  
Hui Xie ◽  
Jianliang Zhang ◽  
Zhonghua Wu
Keyword(s):  
Freeze Drying ◽  
Heating Temperature ◽  
Convective Drying ◽  
Vacuum Drying ◽  
Operating Pressure ◽  
Drying Process ◽  
Drying Time ◽  
Drying Characteristics ◽  
Freeze Dried ◽  
Monomeric Anthocyanins

Abstract A pilot-scale vacuum dryer with visualization system was used to study the drying characteristics of the whole blueberry pulp. The heating temperature, operating pressure and initial material thickness had significant effects on the drying characteristics and the retentions of total monomeric anthocyanins and vitamin C in dried blueberry powder (P < 0.05). According the heat transfer mode inside the material, the whole drying process could be divided into three periods: the boiling drying period, the convective drying period, and the conductive drying period. Most of water in the material was evaporated in the boiling and convective drying period. Considering the drying characteristics and dried product quality comprehensively, an optimal drying condition for whole blueberry pulp were: heating temperature 70 °C, operating pressure 1 kPa, and the initial material thickness 5 mm. It further compared the drying time, nutrients retention, hygroscopicity and microstructure of the product obtained by vacuum and vacuum freeze drying. The drying time of vacuum drying (1.2 h) was much shorter than that of vacuum freeze drying (44 h); the retentions of the total monomeric anthocyanins and vitamin C in dried blueberry powder of vacuum drying (67.9, 46.7%) were lower than that of vacuum freeze drying (79.0, 85.8%); while the hygroscopicity of vacuum dried powder was less than that of the freeze-dried product. The SEM images displayed that the surface of the vacuum-dried blueberry powder was porous, and the vacuum freeze-dried product was lamellar.

scholarly journals The Quality of Red Bell Pepper Subjected to Freeze-Drying Preceded by Traditional and Novel Pretreatment

Foods ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 226
Author(s):  
Katarzyna Rybak ◽  
Artur Wiktor ◽  
Dorota Witrowa-Rajchert ◽  
Oleksii Parniakov ◽  
Małgorzata Nowacka
Keyword(s):  
Freeze Drying ◽  
Bell Pepper ◽  
Total Phenolic ◽  
Thermal Methods ◽  
Drying Time ◽  
Freeze Dried ◽  
Dehydration Processes ◽  
Vacuum Freezing ◽  
Better Than

It has been demonstrated previously in the literature that utilization of PEF or a combination of a pulsed electric field (PEF) and ultrasounds (US) can facilitate dehydration processes and improve the quality of dried products even better than the application of thermal methods such as blanching. The aim of the study was to evaluate the quality of red bell pepper subjected to freeze-drying preceded by blanching or PEF or US treatment applied in a single and combined mode. Furthermore, the freeze-drying was preceded by shock freezing or vacuum freezing performed inside the freeze-dryer as a result of pressure drop during the first stage of freeze-drying. All of the analyzed technological variants enhanced the drying kinetics when compared to the intact material. Freeze-dried bell pepper subjected to non-thermal pretreatment exhibited higher vitamin C, total phenolic and carotenoids content than blanched material despite the fact that blanching reduced drying time the most compared to all other analyzed methods.

Study on Drying Characteristics of Microalgae under Different Conditions

2013 ◽  
Vol 724-725 ◽  
pp. 296-299
Author(s):  
Chun Xiang Chen ◽  
Xiao Qian Ma ◽  
Xiao Cong Li ◽  
Wei Ping Qin
Keyword(s):  
Moisture Content ◽  
Mass Loss ◽  
Fresh Water ◽  
Chlorella Vulgaris ◽  
Drying Process ◽  
Drying Time ◽  
Drying Characteristics ◽  
Second Stage ◽  
Drying System ◽  
Two Stages

To find out an alternative of coal saving, a kind of microalgae, Chlorella vulgaris (C. vulgaris) which is widespread in fresh water was studied by digital blast drying system. The effect of the moisture content, drying thickness and temperature on the drying process of C. vulgaris were investigated. The results indicated that when the drying temperature is high, the moisture content is low and the material thickness is small, the drying time is short. The drying process of C.vulgaris can be divided into two stages, and the mass loss is mainly occurred in the second stage . The results will provide guidance for design of drying process and dryer of microalgae.

Sign in / Sign up

Export Citation Format

Share Document