In situ investigation on the role of hydrogen evolution on the estimated metastable pit sizes in an Al-Mg alloy

CORROSION ◽  
10.5006/3688 ◽  
2021 ◽  
Author(s):  
Gayathri Sridhar ◽  
Nick Birbilis ◽  
VS Raja

The fraction of pit dissolution charge that contributes to hydrogen evolution (HE) occurring within metastable pits (analyzed in real-time) was determined to evaluate the error it introduces in the pit size estimations derived merely from the analysis of dissolution current. With in situ optical time-lapse imaging, the charge consumed by HE (C<sub>HE</sub>) during the current transients was determined from the size of the hydrogen bubbles evolving at real-time metastable pit locations in an aged Al-Mg alloy. The ratio C<sub>HE</sub>/C<sub>pit</sub> was observed to range between 0.019 and 0.052 depending on the charge of the transient. This difference was attributed to the catalytic nature of the pit surface that develops as a consequence of the pertinent pitting mechanism. Therefore, it was concluded that the HE within the metastable pits might not play a significant role in the underestimation of metastable pit sizes determined from the current transients recorded at anodic potentials below E<sub>pit</sub>.

2017 ◽  
Vol 23 (S1) ◽  
pp. 1716-1717 ◽  
Author(s):  
Kimberly Dick Thelander ◽  
L. Reine Wallenberg ◽  
Axel R. Persson ◽  
Marcus Tornberg ◽  
Daniel Jacobsson ◽  
...  

2020 ◽  
Author(s):  
Roland Szalay ◽  
Boglárka-Mercédesz Kis ◽  
Szabolcs Harangi ◽  
László Palcsu ◽  
Marcello Bitetto ◽  
...  

<p>The Carpathian-Pannonian region was dominated by diverse volcanic activity for the last 20 million years, and even 1 million years ago there was precedent for active zones.  Although volcanic eruptions are very uncommon in the region today, however the frequent earthquakes in the Carpathian-bend, the numerous appearance and intense manifestation of gas-emissions in the southeastern areas of the region and many petrochemical and geochemical volcanologic studies as well, indicate that the area is likely not completely inactive. The gas emissions investigated by us may be directly related to these geodynamic processes [1].</p><p>In Romania, the Eastern Carpathian Neogene-Quaternary volcanic chain and it’s neighbouring zones contain most of the carbon dioxide rich gas emissions, which also occur in the form of natural mofettes, bubbling pools and springs. They can appear in frequently populated settlements more often in cellars, which puts the inhabitants in direct danger due the lack of information in the public knowledge.</p><p>The motivation of our work is to gather real time and in-situ information with the help of Multi-Gas instrument about the composition of the gas-emissions across the Eastern Carpathians and to create a high resolution geological map from the measured sites in the mentioned area above. Furthermore, we would like to clarify if there is any relation between the tectonic characteristics of the study area and the manifestation, concentration of gas-emissions.</p><p>In total, 205 gas emissions were investigated for their CO<sub>2 </sub>(0-100%), CH<sub>4 </sub>(0-7%) and H<sub>2</sub>S (0-200 ppm) concentrations. The composition of the different gas-species varied according to the geological context. The <strong>CO<sub>2</sub></strong> concentrations varied between 0.96 and 98.08 %. The highest values were measured in the the Quaternary volcanic area of Ciomad, and also in the neighbouring thrusted and folded area of the Carpathian Flysch which suggests a tectonic control over the appearance of the gas emissions.</p><p>The <strong>CH<sub>4</sub></strong> concentrations ranged between 0.21 and 6.76% and were higher at hydrocarbon-prone areas, such as the sedimentary deposits of the Transylvanian Basin and Carpathian Flysch. In these cases the CO<sub>2</sub> concentrations were low (up to 4.6%).</p><p>The <strong>H<sub>2</sub>S</strong> concentrations varied between 0.21 and 200 ppm, according to our knowledge, these are the first H<sub>2</sub>S in-situ measurements in the gas emissions of the study area. The concentrations of H<sub>2</sub>S were higher at the volcanic area of Ciomad, reaching values above the detection limit (~200 ppm) which are related to volcanic degassing.</p><p>In conclusion, based on the investigated sites, there is a spatial correlation between the appearance of mineral water springs, gas emissions on surface and the neighbouring tectonic structures. The Multi-Gas proved to be a useful tool in the in-situ investigation of gas emissions of the Eastern Carpathians, being efficient especially for the measurement of the H<sub>2</sub>S concentrations that are very sensitive for oxidation processes.</p><p><strong>Bibliography:</strong></p><p>1.Kis B.M., Caracusi, A., Palcsu, L., Baciu, C., Ionescu, A., Futó, I., Sciarra, A., Harangi, Sz., Noble Gas and Carbon Isotope Systematics at the Seemingly Inactive Ciomadul Volcano (Eastern‐Central Europe, Romania): Evidence for Volcanic Degassing, Geochemistry, Geophysics, Geosystems, vol.20, issue 6, 2019, 3019-3043.</p>


1989 ◽  
Vol 167 ◽  
Author(s):  
Seyong Oh ◽  
Igor Y. Khandros ◽  
Janet L. Poetzinger

AbstractA real-time x-ray analysis technique has been developed and employed for in-situ investigation of solid and liquid state reactions in Au-Sn/Cu system as a function of temperature. Typically, 1 μm eutectic Au-Sn films were deposited on 1.5 μm Cu layers on Si wafers. Phase changes in Au-Sn films on Cu from ambient to above the eutectic temperature have been investigated. Cu diffusion into Au-Sn film above 250 °C resulted in a ternary Au-Sn-Cu compound and raised the melting temperature of the structure to about 325 °C. This affects joining characteristics of the Au-Sn metallization.


2021 ◽  
Vol 6 (1) ◽  
pp. 3
Author(s):  
Evgeniy Merson ◽  
Vitaliy Poluyanov ◽  
Dmitry Merson ◽  
Pavel Myagkikh

Biodegradable magnesium alloys are promising materials for application in medicine. The corrosion rate and type of corrosion are among the most important properties for this kind of materials. The fine-grained biodegradable alloys AZ31 (hot-rolled) and ZK60 (extruded) were studied in the present work with the use of in situ methods including the hydrogen evolution corrosion rate measurement and real-time surface observation as well as ex situ methods such as the weight loss assessment and the post-mortem examination by confocal laser scanning microscopy. The experimental methods included immersion test in SBF (0.9% NaCl aqueous solution) during 120 h with 37 °C with recirculating corrosion media. The hydrogen evolution was measured with a burette with a constant time interval of 1 hour. The real-time surface observation was carried out with a high-resolution camera. The measurement of pH level was done twice a day. Corrosion rate curves, 3D morphology of corroded morphology and video recordings showing evolution of corrosion damage have been obtained. As a result, ZK60 was found to be less corrosion-resistant and addicted to pitting corrosion, whereas AZ31 showed pronounced susceptibility to filiform corrosion.


2018 ◽  
Vol 122 (17) ◽  
pp. 9499-9506 ◽  
Author(s):  
Wei Lu ◽  
Chunxin Ma ◽  
Dong Zhang ◽  
Xiaoxia Le ◽  
Jiawei Zhang ◽  
...  

2019 ◽  
Vol 177 ◽  
pp. 384-391 ◽  
Author(s):  
Jose R.A. Godinho ◽  
Kuhan Chellappah ◽  
Ian Collins ◽  
Pei Ng ◽  
Megan Smith ◽  
...  

1993 ◽  
Vol 123 (4) ◽  
pp. 935-948 ◽  
Author(s):  
T P O'Connor ◽  
D Bentley

Directed outgrowth of neural processes must involve transmission of signals from the tips of filopodia to the central region of the growth cone. Here, we report on the distribution and dynamics of one possible element in this process, actin, in live growth cones which are reorienting in response to in situ guidance cues. In grasshopper embryonic limbs, pioneer growth cones respond to at least three types of guidance cues: a limb axis cue, intermediate target cells, and a circumferential band of epithelial cells. With time-lapse imaging of intracellularly injected rhodamine-phalloidin and rhodamine-actin, we monitored the distribution of actin during growth cone responses to these cues. In distal limb regions, accumulation of actin in filopodia and growth cone branches accompanies continued growth, while reduction of actin accompanies withdrawal. Where growth cones are reorienting to intermediate target cells, or along the circumferential epithelial band, actin selectively accumulates in the proximal regions of those filopodia that have contacted target cells or are extending along the band. Actin accumulations can be retrogradely transported along filopodia, and can extend into the central region of the growth cone. These results suggest that regulation and translocation of actin may be a significant element in growth cone steering.


Author(s):  
Tim P. O'Connor

During development of the nervous system, neurons extend axons over relatively long distances to contact their targets. A variety of molecules in the extracellular environment are instrumental in guiding a neuronal process. The motile tip of the process, the growth cone, senses and transduces this guidance information, resulting in a local reorganization and consolidation of the cytoskeleton. Although much work has been dedicated to isolating the molecules that guide a neuronal growth cone, relatively little is known about the dynamic processes that occur when a growth cone turns in response to guidance information. Recently, a number of biological systems have been developed that enable time lapse imaging of growth cones as they extend axons in situ. One of these systems is the embryonic grasshopper limb fillet.In the grasshopper embryo, a pair of sibling neurons, named the Til pioneers, are the first neurons to extend axons toward the central nervous system (CNS).


2005 ◽  
Vol 201 (4) ◽  
pp. 501-504 ◽  
Author(s):  
Colleen Witt ◽  
Subhadip Raychaudhuri ◽  
Arup K. Chakraborty

Immunological phenomena that were once deduced from genetic, biochemical, and in situ approaches are now being witnessed in living color, in three dimensions, and in real time. The information in time-lapse imaging can provide valuable mechanistic insight into a host of processes, from cell migration to signal transduction. What we need now are methods to quantitate these new visual data and to exploit computational resources and statistical mechanical methods to develop mechanistic models.


Sign in / Sign up

Export Citation Format

Share Document