scholarly journals Photochemical chlorine and bromine activation from artificial saline snow

2013 ◽  
Vol 13 (19) ◽  
pp. 9789-9800 ◽  
Author(s):  
S. N. Wren ◽  
D. J. Donaldson ◽  
J. P. D. Abbatt
Keyword(s):  
Gas Phase ◽  
High Surface ◽  
High Surface Area ◽  
Ionization Mass ◽  
Heterogeneous Oxidation ◽  
Reactive Halogen Species ◽  
Explosion Mechanism ◽  
Halogen Species ◽  
Snow Samples

Abstract. The activation of reactive halogen species – particularly Cl2 – from sea ice and snow surfaces is not well understood. In this study, we used a photochemical snow reactor coupled to a chemical ionization mass spectrometer to investigate the production of Br2, BrCl and Cl2 from NaCl/NaBr-doped artificial snow samples. At temperatures above the NaCl-water eutectic, illumination of samples (λ > 310 nm) in the presence of gas phase O3 led to the accelerated release of Br2, BrCl and the release of Cl2 in a process that was significantly enhanced by acidity, high surface area and additional gas phase Br2. Cl2 production was only observed when both light and ozone were present. The total halogen release depended on [ozone] and pre-freezing [NaCl]. Our observations support a "halogen explosion" mechanism occurring within the snowpack, which is initiated by heterogeneous oxidation and propagated by Br2 or BrCl photolysis and by recycling of HOBr and HOCl into the snowpack. Our study implicates this important role of active chemistry occurring within the interstitial air of aged (i.e. acidic) snow for halogen activation at polar sunrise.

scholarly journals Photochemical chlorine and bromine activation from artificial saline snow

2013 ◽  
Vol 13 (5) ◽  
pp. 14163-14193 ◽  
Author(s):  
S. N. Wren ◽  
D. J. Donaldson ◽  
J. P. D. Abbatt
Keyword(s):  
Gas Phase ◽  
High Surface ◽  
High Surface Area ◽  
Ionization Mass ◽  
Heterogeneous Oxidation ◽  
Reactive Halogen Species ◽  
Explosion Mechanism ◽  
Halogen Activation ◽  
Halogen Species ◽  
Snow Samples

Abstract. The activation of reactive halogen species – particularly Cl2 – from sea ice and snow surfaces is not well understood. In this study, we used a photochemical snow reactor coupled to a chemical ionization mass spectrometer to investigate the production of Br2, BrCl and Cl2 from NaCl/NaBr-doped artificial snow samples. At temperatures above the NaCl-water eutectic, illumination of samples (λ > 310 nm) in the presence of gas phase O3 led to the accelerated release of Br2, BrCl and the release of Cl2 in a process that was significantly enhanced by acidity, high surface area and additional gas phase Br2. Cl2 production was only observed when both light and ozone were present. The total halogen release depended on [O3] and pre-freezing [NaCl]. Our observations support a "halogen explosion" mechanism occurring within the snowpack which is initiated by heterogeneous oxidation, and propagated by Br2 or BrCl photolysis and by recycling of HOBr and HOCl into the snowpack. Our study implicates an important role for active chemistry occurring within the interstitial air of aged (i.e., acidic) snow for halogen activation at polar sunrise.

scholarly journals Rugae-like FeP nanocrystal assembly on a carbon cloth: an exceptionally efficient and stable cathode for hydrogen evolution

Nanoscale ◽  
2015 ◽  
Vol 7 (25) ◽  
pp. 10974-10981 ◽  
Author(s):  
Xiulin Yang ◽  
Ang-Yu Lu ◽  
Yihan Zhu ◽  
Shixiong Min ◽  
Mohamed Nejib Hedhili ◽  
...  
Keyword(s):  
Gas Phase ◽  
Surface Area ◽  
Hydrogen Evolution ◽  
Hydrogen Generation ◽  
High Surface ◽  
High Surface Area ◽  
Catalytic Efficiency ◽  
Carbon Cloth ◽  
Nanocrystal Assembly

High surface area FeP nanosheets on a carbon cloth were prepared by gas phase phosphidation of electroplated FeOOH, which exhibit exceptionally high catalytic efficiency and stability for hydrogen generation.

scholarly journals Single and Dual Metal Oxides as Promising Supports for Carbon Monoxide Removal from an Actual Syngas: The Crucial Role of Support on the Selectivity of the Au–Cu System

Catalysts ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 852 ◽  
Author(s):  
Bernay Cifuentes ◽  
Felipe Bustamante ◽  
Martha Cobo
Keyword(s):  
Metal Oxides ◽  
High Surface ◽  
High Surface Area ◽  
Carbon Deposits ◽  
Promising Strategy ◽  
Cu Catalysts ◽  
Dual Metal ◽  
Effect Of The Support ◽  
Lower Capacity

A catalytic screening was performed to determine the effect of the support on the performance of an Au–Cu based system for the removal of CO from an actual syngas. First, a syngas was obtained from reforming of ethanol. Then, the reformer outlet was connected to a second reactor, where Au–Cu catalysts supported on several single and dual metal oxides (i.e., CeO2, SiO2, ZrO2, Al2O3, La2O3, Fe2O3, CeO2-SiO2, CeO2-ZrO2, and CeO2-Al2O3) were evaluated. AuCu/CeO2 was the most active catalyst due to an elevated oxygen mobility over the surface, promoting CO2 formation from adsorption of C–O* and OH− intermediates on Au0 and CuO species. However, its lower capacity to release the surface oxygen contributes to the generation of stable carbon deposits, which lead to its rapid deactivation. On the other hand, AuCu/CeO2-SiO2 was more stable due to its high surface area and lower formation of formate and carbonate intermediates, mitigating carbon deposits. Therefore, use of dual supports could be a promising strategy to overcome the low stability of AuCu/CeO2. The results of this research are a contribution to integrated production and purification of H2 in a compact system.

Biological weathering in soil: the role of symbiotic root-associated fungi biosensing minerals and directing photosynthate-energy into grain-scale mineral weathering

2008 ◽  
Vol 72 (1) ◽  
pp. 85-89 ◽  
Author(s):  
J. R. Leake ◽  
A. L. Duran ◽  
K. E. Hardy ◽  
I. Johnson ◽  
D. J. Beerling ◽  
...  
Keyword(s):  
Carbon Allocation ◽  
High Surface ◽  
Turgor Pressure ◽  
High Surface Area ◽  
Volume Ratio ◽  
Mineral Weathering ◽  
Mycorrhizal Associations ◽  
P Content ◽  
Biological Weathering

AbstractBiological weathering is a function of biotic energy expenditure. Growth and metabolism of organisms generates acids and chelators, selectively absorbs nutrient ions, and applies turgor pressure and other physical forces which, in concert, chemically and physically alter minerals. In unsaturated soil environments, plant roots normally form symbiotic mycorrhizal associations with fungi. The plants provide photosynthate-carbohydrate-energy to the fungi in return for nutrients absorbed from the soil and released from minerals. In ectomycorrhiza, one of the two major types of mycorrhiza of trees, roots are sheathed in fungus, and 15—30% of the net photosynthate of the plants passes through these fungi into the soil and virtually all of the water and nutrients taken up by the plants are supplied through the fungi. Here we show that ectomycorrhizal fungi actively forage for minerals and act as biosensors that discriminate between different grain sizes (53—90 μm, 500—1000 μm) and different minerals (apatite, biotite, quartz) to favour grains with a high surface-area to volume ratio and minerals with the highest P content. Growth and carbon allocation of the fungi is preferentially directed to intensively interact with these selected minerals to maximize resource foraging.

scholarly journals Chemical interactions between ship-originated air pollutants and ocean-emitted halogens

2021 ◽  
Author(s):  
Qinyi Li ◽  
Alba Badia ◽  
Rafael P. Fernandez ◽  
Anoop S. Mahajan ◽  
Ana Isabel López-Noreña ◽  
...  
Keyword(s):  
Air Pollutants ◽  
Atmospheric Composition ◽  
Chemical Transformations ◽  
Chemical Interactions ◽  
China Sea ◽  
Reactive Halogen Species ◽  
The Impact ◽  
Surface Increase ◽  
Halogen Species

<p>Ocean-going ships supply products from one region to another and contribute to the world’s economy. Ship exhaust contains many air pollutants and results in significant changes in marine atmospheric composition. The role of Reactive Halogen Species (RHS) in the troposphere has received increasing recognition and oceans are the largest contributors to their atmospheric burden. However, the impact of shipping emissions on RHS and that of RHS on ship-originated air pollutants have not been studied in detail. Here, an updated WRF-Chem model is utilized to explore the chemical interactions between ship emissions and oceanic RHS over the East Asia seas in summer. The emissions and resulting chemical transformations from shipping activities increase the level of NO and NO<sub>2</sub> at the surface, increase O<sub>3</sub> in the South China Sea, but decrease O<sub>3</sub> in the East China Sea. Such changes in pollutants result in remarkable changes in the levels of RHS as well as in their partitioning. The abundant RHS, in turn, reshape the loadings of air pollutants and those of the oxidants with marked patterns along the ship tracks. We, therefore, suggest that these important chemical interactions of ship-originated emissions with RHS should be considered in the environmental policy assessments of the role of shipping emissions in air quality and climate.</p>

scholarly journals The Role of Surface Hydroxylation, Lattice Vacancies and Bond Covalency in the Electrochemical Oxidation of Water (OER) on Ni-Depleted Iridium Oxide Catalysts

2020 ◽  
Vol 234 (5) ◽  
pp. 787-812 ◽  
Author(s):  
Hong Nhan Nong ◽  
Hoang Phi Tran ◽  
Camillo Spöri ◽  
Malte Klingenhof ◽  
Lorenz Frevel ◽  
...  
Keyword(s):  
Metal Oxide ◽  
High Surface ◽  
High Surface Area ◽  
Oxide Shell ◽  
Mixed Metal Oxide ◽  
Support Materials ◽  
Oxide Support ◽  
Rich Alloy ◽  
Surface Hydroxylation

AbstractThe usage of iridium as an oxygen-evolution-reaction (OER) electrocatalyst requires very high atom efficiencies paired with high activity and stability. Our efforts during the past 6 years in the Priority Program 1613 funded by the Deutsche Forschungsgemeinschaft (DFG) were focused to mitigate the molecular origin of kinetic overpotentials of Ir-based OER catalysts and to design new materials to achieve that Ir-based catalysts are more atom and energy efficient, as well as stable. Approaches involved are: (1) use of bimetallic mixed metal oxide materials where Ir is combined with cheaper transition metals as starting materials, (2) use of dealloying concepts of nanometer sized core-shell particle with a thin noble metal oxide shell combined with a hollow or cheap transition metal-rich alloy core, and (3) use of corrosion-resistant high-surface-area oxide support materials. In this mini review, we have highlighted selected advances in our understanding of Ir–Ni bimetallic oxide electrocatalysts for the OER in acidic environments.

Graphene-based Nanomaterials for Fabrication of ‘Pesticide’ Electrochemical Sensors

2020 ◽  
Vol 3 (1) ◽  
pp. 26-40
Author(s):  
Manorama Singh ◽  
Smita R. Bhardiya ◽  
Fooleswar Verma ◽  
Vijai K. Rai ◽  
Ankita Rai
Keyword(s):  
Electrochemical Sensors ◽  
Hybrid Composites ◽  
High Surface ◽  
High Surface Area ◽  
High Sensitivity ◽  
Sensor Technology ◽  
Hybrid Functional ◽  
Suitable Material ◽  
Functional Composites

At present, graphene is one of the most up-to-date materials and it can be applied for various energy conversion devices and sensor technology. In this review article, our main focus is to summarize the role of graphene and its modified surface leading to develop hybrid nanomaterials and its applications in fabrication of pesticide sensor. Graphene based materials demonstrate exclusive electrochemical and optical properties as well as compatibility to absorb a variety of bio-molecules through π-π stacking interaction and/or electrostatics interaction, which make them ideal material to be employed in sensor application. The role of graphene is very crucial in preparing different unique and desirable hybrid functional composites along with nanoparticles, redox mediators, conducting polymers etc. to improve the performance of the sensors. Therefore, they can be easily used as a suitable material applying in fabrication of electrochemical sensors/ biosensors for the detection of organophosphorous and carbamate pesticides. A number of most recent reported works were discussed in which graphene-based hybrid composites show high sensitivity, good catalytic activity, selectivity towards the determination of pesticide either enzymatically or nonenzymatically. The properties of graphene (exceptional charge transport, thermal, optical, mechanical, high surface area, large pore volume and size, an opened ordered structure) play an important role in pesticide detection.

Modulating interleaved ZnO assembly with CuO nanoleaves for multifunctional performance: perdurable CO2 gas sensor and visible light catalyst

2017 ◽  
Vol 4 (11) ◽  
pp. 1848-1861 ◽  
Author(s):  
Shravanti Joshi ◽  
Ram Kumar C. B. ◽  
Lathe A. Jones ◽  
Edwin L. H. Mayes ◽  
Samuel J. Ippolito ◽  
...  
Keyword(s):  
Visible Light ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Gas Detection ◽  
Visible Light Photocatalysis ◽  
Co2 Gas ◽  
Co2 Gas Sensor ◽  
Catalytic Role

Efficient CO2 gas detection and visible light photocatalysis performance shown by interleaved CuO/ZnO heterostructures ascribed primarily to the high surface area, p/n nano-interfaces and catalytic role of Ag.

Sign in / Sign up

Export Citation Format

Share Document