scholarly journals Experimental evidence of the rear capture of aerosol particles by raindrops

2017 ◽  
Vol 17 (6) ◽  
pp. 4159-4176 ◽  
Author(s):  
Pascal Lemaitre ◽  
Arnaud Querel ◽  
Marie Monier ◽  
Thibault Menard ◽  
Emmanuel Porcheron ◽  
...  

Abstract. This article presents new measurements of the efficiency with which aerosol particles of accumulation mode size are collected by a 1.25 mm sized raindrop. These laboratory measurements provide the link to reconcile the scavenging coefficients obtained from theoretical approaches with those from experimental studies. We provide here experimental proof of the rear capture mechanism in the flow around drops, which has a fundamental effect on submicroscopic particles. These experiments thus confirm the efficiencies theoretically simulated by Beard (1974). Finally, we propose a semi-analytical expression to take into account this essential mechanism to calculate the collection efficiency for drops within the rain size range.

2017 ◽  
Author(s):  
Pascal Lemaitre ◽  
Arnaud Querel ◽  
Marie Monier ◽  
Thibault Menard ◽  
Emmanuel Porcheron ◽  
...  

Abstract. This article presents new measurements of the efficiency with which aerosol particles of accumulation mode size are collected by a 1.25 mm sized raindrop. These laboratory measurements provide the link to reconcile the scavenging coefficients obtained from theoretical approaches with those from experimental studies. We provide here experimental proof of the rear capture mechanism in the flow around drops, which has a fundamental effect on sub-microscopic particles. These experiments thus confirm the efficiencies theoretically simulated by Beard (1974). Finally, we propose a semi-analytical expression to take into account this essential mechanism to calculate the collection efficiency for drops within the rain size range.


2016 ◽  
Vol 16 (3) ◽  
pp. 702-716 ◽  
Author(s):  
Evelyn Freney ◽  
Sellegri Karine Sellegri Karine ◽  
Asmi Eija ◽  
Rose Clemence ◽  
Chauvigne Aurelien ◽  
...  

Author(s):  
Jun-Hyung Lim ◽  
Sang Hwan Nam ◽  
Jongwoo Kim ◽  
Nam Hoon Kim ◽  
Gun-Soo Park ◽  
...  

Abstract In this study, a three-stage bioaerosol sampler with a sampling flow rate of 170 L/min was designed and fabricated for sampling the bioaerosols released during human breathing and coughing, and its performance was evaluated. The sampler was constructed using a cyclone separator with a cutoff size of 2.5 µm as a preseparator, a multi-nozzle virtual impactor with a cutoff size of 0.34 µm as an aerosol concentrator, and a BioSampler, which is a commercial product, for collecting bioaerosols in a collection fluid. The collection efficiency of the sampler was evaluated through simulations and experiments. Only particles with sizes of 0.1-4 µm were selectively collected in the collection fluid. Bacteriophage bioaerosols were sampled using the developed sampler and ACD-200 Bobcat sampler, which is a commercial product. The amounts of collected bacteriophages were compared using the polymerase chain reaction (PCR) technique. The sampling performance of the developed sampler was similar to that of the ACD-200 Bobcat sampler. Moreover, the developed sampler showed its ability to sample bioaerosols of a specific size-range and collect them directly in a collection fluid for the PCR analysis. Therefore, the developed sampler is expected to be useful for indoor environmental monitoring by effectively sampling the bioaerosols released indoors during human breathing and coughing.


2018 ◽  
Vol 11 (4) ◽  
pp. 2325-2343 ◽  
Author(s):  
Xiaoli Shen ◽  
Ramakrishna Ramisetty ◽  
Claudia Mohr ◽  
Wei Huang ◽  
Thomas Leisner ◽  
...  

Abstract. The laser ablation aerosol particle time-of-flight mass spectrometer (LAAPTOF, AeroMegt GmbH) is able to identify the chemical composition and mixing state of individual aerosol particles, and thus is a tool for elucidating their impacts on human health, visibility, ecosystem, and climate. The overall detection efficiency (ODE) of the instrument we use was determined to range from  ∼  (0.01 ± 0.01) to  ∼  (4.23 ± 2.36) % for polystyrene latex (PSL) in the size range of 200 to 2000 nm,  ∼  (0.44 ± 0.19) to  ∼  (6.57 ± 2.38) % for ammonium nitrate (NH4NO3), and  ∼  (0.14 ± 0.02) to  ∼  (1.46 ± 0.08) % for sodium chloride (NaCl) particles in the size range of 300 to 1000 nm. Reference mass spectra of 32 different particle types relevant for atmospheric aerosol (e.g. pure compounds NH4NO3, K2SO4, NaCl, oxalic acid, pinic acid, and pinonic acid; internal mixtures of e.g. salts, secondary organic aerosol, and metallic core–organic shell particles; more complex particles such as soot and dust particles) were determined. Our results show that internally mixed aerosol particles can result in spectra with new clusters of ions, rather than simply a combination of the spectra from the single components. An exemplary 1-day ambient data set was analysed by both classical fuzzy clustering and a reference-spectra-based classification method. Resulting identified particle types were generally well correlated. We show how a combination of both methods can greatly improve the interpretation of single-particle data in field measurements.


2018 ◽  
Vol 3 (35) ◽  
pp. 10032-10048
Author(s):  
Govindarajan Radha ◽  
Baskaran Vijaya Pandiyan ◽  
Palanisamy Deepa ◽  
Subbiah Govindarajan ◽  
Ponmalai Kolandaivel ◽  
...  

2019 ◽  
Vol 59 (3) ◽  
Author(s):  
Inga Garbarienė ◽  
Vidmantas Remeikis ◽  
Agnë Mašalaitė ◽  
Andrius Garbaras ◽  
Tpmasz Petelski ◽  
...  

We analysed δ13C of total carbon (TC) and δ15N of total nitrogen (TN) in submicron (PM1) and size segregated aerosol particles (PM0.056–2.5) collected during a cruise in the Baltic Sea from 9 to 17 November 2012. PM1 were characterized by the highest δ13C (–26.4‰) and lowest δ15N (–0.2 and 0.8‰) values when air masses arrived from the southwest direction (Poland). The obtained δ13C values indicated that combined emissions of coal and diesel/gasoline combustion were the most likely sources of TC. The depleted δ15N values indicated that TN originated mainly from liquid fuel combustion (road traffic, shipping) during this period. The lowest δ13C and highest δ15N values were determined in PM1 samples during the western airflow when the air masses had no recent contact with land. The highest δ15N values were probably associated with chemical aging of nitrogenous species during long-range transport, the lowest δ13C values could be related to emissions from diesel/gasoline combustion, potentially from ship traffic. The δ13C analysis of size-segregated aerosol particles PM0.056–2.5 revealed that the lowest δ13C values were observed in the size range from 0.056 to 0.18 µm and gradual 13C enrichment occurred in the size range from 0.18 to 2.5 µm due to different sources or formation mechanisms of the aerosols.


2021 ◽  
Vol 22 (17) ◽  
pp. 9317
Author(s):  
Konstantinos Zifkos ◽  
Christophe Dubois ◽  
Katrin Schäfer

Extracellular vesicles (EVs) compose a heterogenous group of membrane-derived particles, including exosomes, microvesicles and apoptotic bodies, which are released into the extracellular environment in response to proinflammatory or proapoptotic stimuli. From earlier studies suggesting that EV shedding constitutes a cellular clearance mechanism, it has become evident that EV formation, secretion and uptake represent important mechanisms of intercellular communication and exchange of a wide variety of molecules, with relevance in both physiological and pathological situations. The putative role of EVs in hemostasis and thrombosis is supported by clinical and experimental studies unraveling how these cell-derived structures affect clot formation (and resolution). From those studies, it has become clear that the prothrombotic effects of EVs are not restricted to the exposure of tissue factor (TF) and phosphatidylserines (PS), but also involve multiplication of procoagulant surfaces, cross-linking of different cellular players at the site of injury and transfer of activation signals to other cell types. Here, we summarize the existing and novel clinical and experimental evidence on the role and function of EVs during arterial and venous thrombus formation and how they may be used as biomarkers as well as therapeutic vectors.


Author(s):  
Henrik Svensmark ◽  
Jens Olaf P Pedersen ◽  
Nigel D Marsh ◽  
Martin B Enghoff ◽  
Ulrik I Uggerhøj

Experimental studies of aerosol nucleation in air, containing trace amounts of ozone, sulphur dioxide and water vapour at concentrations relevant for the Earth's atmosphere, are reported. The production of new aerosol particles is found to be proportional to the negative ion density and yields nucleation rates of the order of 0.1–1 cm −3  s −1 . This suggests that the ions are active in generating an atmospheric reservoir of small thermodynamically stable clusters, which are important for nucleation processes in the atmosphere and ultimately for cloud formation.


2006 ◽  
Vol 20 (13) ◽  
pp. 725-751 ◽  
Author(s):  
J. L. RODRÍGUEZ-LÓPEZ ◽  
J. M. MONTEJANO-CARRIZALES ◽  
M. JOSÉ-YACAMÁN

Modern nanoparticle research in the field of small metallic systems has confirmed that many nanoparticles take on some Platonic and Archimedean solids related shapes. A Platonic solid looks the same from any vertex, and intuitively they appear as good candidates for atomic equilibrium shapes. A very clear example is the icosahedral ( I h ) particle that only shows {111} faces that contribute to produce a more rounded structure. Indeed, many studies report the I h as the most stable particle at the size range r≤20 Å for noble gases and for some metals. In this review, we report on the structure and shape of mono- and bimetallic nanoparticles in the wide size range from 1–300 nm. First, we present AuPd nanoparticles in the 1–2 nm size range that show dodecahedral atomic growth packing, one of the Platonic solid shapes that have not been identified before in this small size range for metallic particles. Next, with particles in the size range of 2–5 nm, we present an energetic surface reconstruction phenomenon observed also on bimetallic nanoparticle systems of AuPd and AuCu , similar to a re-solidification effect observed during cooling process in lead clusters. These binary alloy nanoparticles show the fivefold edges truncated, resulting in {100} faces on decahedral structures, an effect largely envisioned and reported theoretically, with no experimental evidence in the literature before. Next nanostructure we review is a monometallic system in the size range of ≈5 nm that we termed the decmon. We present here some detailed geometrical analysis and experimental evidence that supports our models. Finally, in the size range of 100–300 nm, we present icosahedrally derived star gold nanocrystals which resembles the great stellated dodechaedron, which is a Kepler–Poisont solid. We conclude then that the shape or morphology of some mono- and bimetallic particles evolves with size following the sequence from atoms to the Platonic solids, and with a slightly greater particle's size, they tend to adopt Archimedean related shapes. If the particle's size is still greater, they tend to adopt shapes beyond the Archimedean (Kepler–Poisont) solids, reaching at the very end the bulk structure of solids. We demonstrate both experimentally and by means of computational simulations for each case that this structural atomic growth sequence is followed in such mono- and bimetallic nanoparticles.


Sign in / Sign up

Export Citation Format

Share Document