scholarly journals Species correlation measurements in turbulent flare plumes: considerations for field measurements

2021 ◽  
Vol 14 (7) ◽  
pp. 5179-5197
Author(s):  
Scott P. Seymour ◽  
Matthew R. Johnson
Keyword(s):  
Measurement Uncertainty ◽  
Black Carbon ◽  
Field Measurement ◽  
Field Measurements ◽  
Tunable Diode Laser ◽  
Bootstrap Analysis ◽  
Positive Skewness ◽  
Spatial Coverage ◽  
Sampling Protocols ◽  
Added Uncertainty

Abstract. Field measurement of flare emissions in turbulent flare plumes is an important and complex challenge. Incomplete combustion from these processes results in emissions of black carbon, unburnt fuels (methane), CO2, and other pollutants. Many field measurement approaches necessarily assume that combustion species are spatially and/or temporally correlated in the plume, such that simple species ratios can be used to close a carbon balance to calculate species emission factors and flare conversion efficiency. This study examines the veracity of this assumption and the associated implications for measurement uncertainty. A novel tunable diode laser absorption spectroscopy (TDLAS) system is used to measure the correlation between H2O and black carbon (BC) volume fractions in the plumes of a vertical, turbulent, non-premixed, buoyancy-driven lab-scale gas flare. Experiments reveal that instantaneous, path-averaged concentrations of BC and H2O can vary independently and are not necessarily well correlated over short time intervals. The scatter in the BC/H2O ratio along a path through the plume was well beyond that which could be attributed to measurement uncertainty and was asymmetrically distributed about the mean. Consistent with previous field observations, this positive skewness toward higher BC/H2O ratios implies short, localized, and infrequent bursts of high BC production that are not well correlated with H2O. This demonstrates that the common assumption of fixed species ratios is not universally valid, and measurements based on limited samples, short sampling times, and/or limited spatial coverage of the plume could be subject to potentially large added uncertainty. For BC emission measurements, the positive skewness of the BC/H2O ratio also suggests that results from small numbers of samples are more likely to be biased low. However, a bootstrap analysis of the results shows how these issues can be avoided with sufficient sample size and provides initial guidance for creating sampling protocols for future field measurements using analogous path-averaged techniques.

scholarly journals Species Correlation Measurements in Turbulent Flare Plumes: Considerations for Field Measurements

2021 ◽  
Author(s):  
Scott P. Seymour ◽  
Matthew R. Johnson
Keyword(s):  
Measurement Uncertainty ◽  
Field Measurements ◽  
Tunable Diode Laser ◽  
Emission Rates ◽  
Bootstrap Analysis ◽  
Positive Skewness ◽  
Spatial Coverage ◽  
Sampling Protocols ◽  
Added Uncertainty ◽  
Short Time

Abstract. Field measurement of flare emissions in turbulent flare plumes is an important and complex challenge. The simplest approaches necessarily assume that combustion species are spatially and/or temporally correlated in the plume, such that simple species ratios can be used to close a carbon balance to calculate species emission rates (i.e. emission factors) and flare conversion efficiency. This study examines the veracity of this assumption and the associated implications for measurement uncertainty. A novel tunable diode laser absorption spectroscopy (TDLAS) system is used to measure the correlation between H2O and black carbon (BC) volume fractions in the plumes of a vertical, turbulent, non-premixed, buoyancy-driven lab-scale gas flare. Experiments reveal that instantaneous, path-averaged concentrations of BC and H2O can vary independently and are not necessarily well-correlated over short time intervals. The scatter in the BC / H2O ratio along a path through the plume was well beyond that which could be attributed to measurement uncertainty and was asymmetrically distributed about the mean. Consistent with previous field observations, this positive skewness toward higher BC / H2O ratios implies short, localized, and infrequent bursts of high BC production, that are not well-correlated with H2O. This demonstrates that the common assumption of fixed species ratios is not universally valid, and measurements based on limited samples, short sampling times, and/or limited spatial coverage of the plume could be subject to potentially large added uncertainty. For BC emission measurements, the positive skewness of the BC / H2O ratio also suggests that results from small numbers of samples are more likely to be biased low. However, a bootstrap analysis of the results shows how these issues should be easily avoidable with sufficient sample size and provides initial guidance for creating sampling protocols for future field measurements using analogous path-averaged techniques.

Atomic 2D electric field imaging of a Yagi–Uda antenna near-field using a portable Rydberg-atom probe and measurement instrument

2020 ◽  
Vol 9 (5) ◽  
pp. 305-312
Author(s):  
Ryan Cardman ◽  
Luís F. Gonçalves ◽  
Rachel E. Sapiro ◽  
Georg Raithel ◽  
David A. Anderson
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Field Measurement ◽  
Near Field ◽  
Measurement Instrument ◽  
Rydberg Atom ◽  
Field Measurements ◽  
Atom Probe ◽  
Electric Field Measurement ◽  
Measurement Uncertainties

AbstractWe present electric field measurements and imaging of a Yagi–Uda antenna near-field using a Rydberg atom–based radio frequency electric field measurement instrument. The instrument uses electromagnetically induced transparency with Rydberg states of cesium atoms in a room-temperature vapor and off-resonant RF-field–induced Rydberg-level shifts for optical SI-traceable measurements of RF electric fields over a wide amplitude and frequency range. The electric field along the antenna boresight is measured using the atomic probe at a spatial resolution of ${\lambda }_{RF}/2$ with electric field measurement uncertainties below 5.5%, an improvement to RF measurement uncertainties provided by existing antenna standards.

Field Measurements on Micro-Climate and Cooling Effect of River Wind on Blocks near the River in Wuhan

2011 ◽  
Vol 361-363 ◽  
pp. 1197-1203
Author(s):  
Yan Yan Huang ◽  
Hong Chen ◽  
Ying Cai ◽  
Li Yuan
Keyword(s):  
Urban Planning ◽  
Field Measurement ◽  
Yangtze River ◽  
Field Measurements ◽  
Cooling Effect ◽  
Architecture Design ◽  
Climate Effects ◽  
Adjustment Mechanism

The special climate effects of waterbody have greater influence on the micro-climate of waterfront. Therefore, taking a typical block alongside Yangtze River as example, the researchers make the field measurement of micro-climate at fixed locations and analyze cooling effect of river wind. It aims to find out the micro-climate adjustment mechanism of Yangtze River, thus providing a guidance for urban planning and architecture design.

scholarly journals The fluxgate magnetometer of the Low Orbit Pearl Satellites (LOPS): overview of in-flight performance and initial results

2021 ◽  
Vol 10 (2) ◽  
pp. 227-243
Author(s):  
Ye Zhu ◽  
Aimin Du ◽  
Hao Luo ◽  
Donghai Qiao ◽  
Ying Zhang ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Current System ◽  
Field Measurements ◽  
Stray Field ◽  
Fluxgate Magnetometer ◽  
General Description ◽  
Flight Performance ◽  
Spatial Coverage ◽  
Magnetic Field Measurements ◽  
Initial Results

Abstract. The Low Orbit Pearl Satellite series consists of six constellations, with each constellation consisting of three identical microsatellites that line up just like a string of pearls. The first constellation of three satellites were launched on 29 September 2017, with an inclination of ∼ 35.5∘ and ∼ 600 km altitude. Each satellite is equipped with three identical fluxgate magnetometers that measure the in situ magnetic field and its low-frequency fluctuations in the Earth's low-altitude orbit. The triple sensor configuration enables separation of stray field effects generated by the spacecraft from the ambient magnetic field (e.g., Zhang et al., 2006). This paper gives a general description of the magnetometer including the instrument design, calibration before launch, in-flight calibration, in-flight performance, and initial results. Unprecedented spatial coverage resolution of the magnetic field measurements allow for the investigation of the dynamic processes and electric currents of the ionosphere and magnetosphere, especially for the ring current and equatorial electrojet during both quiet geomagnetic conditions and storms. Magnetic field measurements from LOPS could be important for studying the method to separate their contributions of the Magnetosphere-Ionosphere (M-I) current system.

scholarly journals Evaluation of single and multiple Doppler lidar techniques to measure complex flow during the XPIA field campaign

2017 ◽  
Vol 10 (1) ◽  
pp. 247-264 ◽  
Author(s):  
Aditya Choukulkar ◽  
W. Alan Brewer ◽  
Scott P. Sandberg ◽  
Ann Weickmann ◽  
Timothy A. Bonin ◽  
...  
Keyword(s):  
Measurement Uncertainty ◽  
Measurement Techniques ◽  
Vertical Plane ◽  
Complex Flow ◽  
Field Campaign ◽  
Velocity Statistics ◽  
Spatial Coverage ◽  
Stable Conditions ◽  
Sonic Anemometers ◽  
Measurement Uncertainties

Abstract. Accurate three-dimensional information of wind flow fields can be an important tool in not only visualizing complex flow but also understanding the underlying physical processes and improving flow modeling. However, a thorough analysis of the measurement uncertainties is required to properly interpret results. The XPIA (eXperimental Planetary boundary layer Instrumentation Assessment) field campaign conducted at the Boulder Atmospheric Observatory (BAO) in Erie, CO, from 2 March to 31 May 2015 brought together a large suite of in situ and remote sensing measurement platforms to evaluate complex flow measurement strategies. In this paper, measurement uncertainties for different single and multi-Doppler strategies using simple scan geometries (conical, vertical plane and staring) are investigated. The tradeoffs (such as time–space resolution vs. spatial coverage) among the different measurement techniques are evaluated using co-located measurements made near the BAO tower. Sensitivity of the single-/multi-Doppler measurement uncertainties to averaging period are investigated using the sonic anemometers installed on the BAO tower as the standard reference. Finally, the radiometer measurements are used to partition the measurement periods as a function of atmospheric stability to determine their effect on measurement uncertainty. It was found that with an increase in spatial coverage and measurement complexity, the uncertainty in the wind measurement also increased. For multi-Doppler techniques, the increase in uncertainty for temporally uncoordinated measurements is possibly due to requiring additional assumptions of stationarity along with horizontal homogeneity and less representative line-of-sight velocity statistics. It was also found that wind speed measurement uncertainty was lower during stable conditions compared to unstable conditions.

scholarly journals Robust, spatially scanning, open-path TDLAS hygrometer using retro-reflective foils for fast tomographic 2-D water vapour concentration field measurements

2014 ◽  
Vol 7 (12) ◽  
pp. 12827-12849 ◽  
Author(s):  
A. Seidel ◽  
S. Wagner ◽  
A. Dreizler ◽  
V. Ebert
Keyword(s):  
Water Vapour ◽  
Single Channel ◽  
Greenhouse Gas Emission ◽  
Concentration Field ◽  
Field Measurements ◽  
Tunable Diode Laser ◽  
Environmental Research ◽  
Soil Physics ◽  
Water Vapour Concentration ◽  
Vapour Concentration

Abstract. We have developed a fast, spatially direct scanning tunable diode laser absorption spectrometer (dTDLAS) that combines four polygon-mirror based scanning units with low-cost retro-reflective foils. With this instrument, tomographic measurements of absolute 2-D water vapour concentration profiles are possible without any calibration using a reference gas. A spatial area of 0.8 m × 0.8 m was covered, which allows for application in soil physics, where greenhouse gas emission from certain soil structures shall be monitored. The whole concentration field was measured with up to 2.5 Hz. In this paper, we present the setup and spectroscopic performance of the instrument regarding the influence of the polygon rotation speed and mode on the absorption signal. Homogeneous H2O distributions were measured and compared to a single channel, bi-static reference TDLAS spectrometer for validation of the instrument. Good accuracy and precision with errors of less than 6% of the absolute concentration and length and bandwidth normalized detection limits of up to 1.1 ppmv · m · √Hz−1 were achieved. The spectrometer is a robust and easy to set up instrument for tomographic reconstructions of 2-D-concentration fields that can be considered a good basis for future field measurements in environmental research.

scholarly journals Attitude Estimation of Underwater Vehicles Using Field Measurements and Bias Compensation

Sensors ◽  
2019 ◽  
Vol 19 (2) ◽  
pp. 330 ◽  
Author(s):  
Nak Ko ◽  
Seokki Jeong ◽  
Suk-seung Hwang ◽  
Jae-Young Pyun
Keyword(s):  
Magnetic Field ◽  
Field Measurement ◽  
Field Measurements ◽  
Underwater Vehicle ◽  
Field Vector ◽  
Attitude Estimation ◽  
Magnetic Field Measurement ◽  
Euler Angles ◽  
Measured Field ◽  
The Magnetic Field

This paper proposes a method of estimating the attitude of an underwater vehicle. The proposed method uses two field measurements, namely, a gravitational field and a magnetic field represented in terms of vectors in three-dimensional space. In many existing methods that convert the measured field vectors into Euler angles, the yaw accuracy is affected by the uncertainty of the gravitational measurement and by the uncertainty of the magnetic field measurement. Additionally, previous methods have used the magnetic field measurement under the assumption that the magnetic field has only a horizontal component. The proposed method utilizes all field measurement components as they are, without converting them into Euler angles. The bias in the measured magnetic field vector is estimated and compensated to take full advantage of all measured field vector components. Because the proposed method deals with the measured field independently, uncertainties in the measured vectors affect the attitude estimation separately without adding up. The proposed method was tested by conducting navigation experiments with an unmanned underwater vehicle inside test tanks. The results were compared with those obtained by other methods, wherein the Euler angles converted from the measured field vectors were used as measurements.

THE COMPARISON OF SLAB DEFLECTION BASED ON FIELD MEASUREMENT, MANUAL CALCULATION (LEVY METHOD) AND FINITE ELEMENT METHOD (PROGRAM SAP 2000)

2016 ◽  
Vol 78 (5) ◽  
Author(s):  
Irpan Hidayat ◽  
Made Suangga ◽  
Fransiscus Leonardo ◽  
Godeliva Juliastuti
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Field Measurement ◽  
Concrete Slab ◽  
Field Measurements ◽  
Large Numbers ◽  
Support Element ◽  
Simple Support ◽  
Manual Calculation ◽  
Element Method

Concrete slab is a structural system that uses beams as a support element slab. The placement of beams at the whole edges of slab, so that the load received by the slab can be transfer into beams. The slab will be deformed/deflection when the loads are given. The value of slab deflection is dependent on the placement of beam support at the edges. This research was conducted on the two boundary condition that is simple support at the two edges and rigid support at whole edges. Calculating the value of deflection based on the results of field measurements and then compared with Marcus Levy method and Finite element method (FEM). Based on the study, the numbers of mesh affected to the value of deflection. The results of deflection with Program SAP 2000 will be approached deflection by Method M. Levy for the mesh division with large numbers. The deflection of slab on the field measurement approached manual calculations and Program SAP2000 with a simple support at the surrounding the edges.  The comparison of deflection was obtained for the simple support based on manual calculations and field measurement has a difference of 0.3% - 1%. Where the value of deflection on the field measurement is smaller than the manual calculation.

scholarly journals Long-Term Performance of Trestle Bridges: Case Study of an Indonesian Marine Port Structure

2020 ◽  
Vol 8 (5) ◽  
pp. 358 ◽  
Author(s):  
Yusak Oktavianus ◽  
Massoud Sofi ◽  
Elisa Lumantarna ◽  
Gideon Kusuma ◽  
Colin Duffield
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Service Life ◽  
Field Measurement ◽  
Field Measurements ◽  
Element Analysis ◽  
Moment Capacity ◽  
Non Destructive

A precast reinforced concrete (RC) T-beam located in seaport Terminal Peti Kemas (TPS) Surabaya built in 1984 is used as a case study to test the accuracy of non-destructive test techniques against more traditional bridge evaluation tools. This bridge is mainly used to connect the berth in Lamong gulf and the port in Java Island for the logistic purposes. The bridge was retrofitted 26 years into its life by adding two strips of carbon fiber reinforced polymer (CFRP) due to excessive cracks observed in the beams. Non-destructive field measurements were compared against a detailed finite element analysis of the structure to predict the performance of the girder in terms of deflection and moment capacity before and after the retrofitting work. The analysis was also used to predict the long-term deflections of the structure due to creep, crack distribution, and the ultimate moment capacity of the individual girder. Moreover, the finite element analysis was used to predict the deflection behavior of the overall bridge due to vehicle loading. Good agreement was obtained between the field measurement and the analytical study. A new service life of the structure considering the corrosion and new vehicle demand is carried out based on field measurement using non-destructive testing. Not only are the specific results beneficial for the Indonesian port authority as the stakeholder to manage this structure, but the approach detailed also paves the way for more efficient evaluation of bridges more generally over their service life.

scholarly journals Using different assumptions of aerosol mixing state and chemical composition to predict CCN concentrations based on field measurements in urban Beijing

2018 ◽  
Vol 18 (9) ◽  
pp. 6907-6921 ◽  
Author(s):  
Jingye Ren ◽  
Fang Zhang ◽  
Yuying Wang ◽  
Don Collins ◽  
Xinxin Fan ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Black Carbon ◽  
Cloud Condensation Nuclei ◽  
Field Measurements ◽  
Minor Role ◽  
Mixing State ◽  
Mixing Processes ◽  
Size Dependent ◽  
Aerosol Mixing State ◽  
Aerosol Chemical Composition

Abstract. Understanding the impacts of aerosol chemical composition and mixing state on cloud condensation nuclei (CCN) activity in polluted areas is crucial for accurately predicting CCN number concentrations (NCCN). In this study, we predict NCCN under five assumed schemes of aerosol chemical composition and mixing state based on field measurements in Beijing during the winter of 2016. Our results show that the best closure is achieved with the assumption of size dependent chemical composition for which sulfate, nitrate, secondary organic aerosols, and aged black carbon are internally mixed with each other but externally mixed with primary organic aerosol and fresh black carbon (external–internal size-resolved, abbreviated as EI–SR scheme). The resulting ratios of predicted-to-measured NCCN (RCCN_p∕m) were 0.90 – 0.98 under both clean and polluted conditions. Assumption of an internal mixture and bulk chemical composition (INT–BK scheme) shows good closure with RCCN_p∕m of 1.0 –1.16 under clean conditions, implying that it is adequate for CCN prediction in continental clean regions. On polluted days, assuming the aerosol is internally mixed and has a chemical composition that is size dependent (INT–SR scheme) achieves better closure than the INT–BK scheme due to the heterogeneity and variation in particle composition at different sizes. The improved closure achieved using the EI–SR and INT–SR assumptions highlight the importance of measuring size-resolved chemical composition for CCN predictions in polluted regions. NCCN is significantly underestimated (with RCCN_p∕m of 0.66 – 0.75) when using the schemes of external mixtures with bulk (EXT–BK scheme) or size-resolved composition (EXT–SR scheme), implying that primary particles experience rapid aging and physical mixing processes in urban Beijing. However, our results show that the aerosol mixing state plays a minor role in CCN prediction when the κorg exceeds 0.1.

Sign in / Sign up

Export Citation Format

Share Document