scholarly journals Experimental assessment of the lidar polarizing sensitivity

2016 ◽  
Author(s):  
L. Belegante ◽  
J. A. Bravo-Aranda ◽  
V. Freudenthaler ◽  
D. Nicolae ◽  
A. Nemuc ◽  
...  
Keyword(s):  
Mass Concentration ◽  
Depolarization Ratio ◽  
Lidar System ◽  
Experimental Assessment ◽  
Ice Particles ◽  
Lidar Measurements ◽  
Extended Analysis ◽  
532 Nm ◽  
Main Factor ◽  
Depolarization Ratios

Abstract. Particle depolarization ratio retrieved from lidar measurements are commonly used for aerosol typing studies, microphysical inversion, or mass concentration retrievals. The particle depolarization ratio is one of the primary parameters that can differentiate several major aerosol components, but only if the measurements are accurate enough. The uncertainties related to the retrieval of particle depolarization ratios are the main factor in determining the accuracy of the derived parameters in such studies. This paper presents an extended analysis of different depolarization calibration procedures, in order to reduce the related uncertainties. The calibration procedures are specific to each lidar system of the European Aerosol Research Lidar Network – EARLINET with polarising capabilities. The results illustrate a significant improvement of the depolarization lidar products for all the selected lidar stations. The calibrated volume and particle depolarization profiles at 532 nm show values that agree with the theory for all selected atmospheric constituents (several aerosol species, ice particles and molecules in the aerosol free regions).

scholarly journals Experimental techniques for the calibration of lidar depolarization channels in EARLINET

2017 ◽  
Author(s):  
Livio Belegante ◽  
Juan Antonio Bravo-Aranda ◽  
Volker Freudenthaler ◽  
Doina Nicolae ◽  
Anca Nemuc ◽  
...  
Keyword(s):  
Mass Concentration ◽  
Experimental Techniques ◽  
Depolarization Ratio ◽  
Lidar Measurements ◽  
532 Nm ◽  
Range Of Values ◽  
Main Factor ◽  
Depolarization Ratios

Abstract. Particle depolarization ratio retrieved from lidar measurements are commonly used for aerosol typing studies, microphysical inversion, or mass concentration retrievals. The particle depolarization ratio is one of the primary parameters that can differentiate several major aerosol components, but only if the measurements are accurate enough. The uncertainties related to the retrieval of particle depolarization ratios are the main factor in determining the accuracy of the derived parameters in such studies. This paper presents different depolarization calibration procedures used to improve the quality of the depolarization data. The results illustrate a significant improvement of the depolarization lidar products for all the selected lidar stations that had implemented depolarization calibration procedures. The calibrated volume and particle depolarization profiles at 532 nm show values that fall within a range of values that are generally accepted in the literature.

scholarly journals The potential of elastic and polarization lidars to retrieve extinction profiles

2020 ◽  
Vol 13 (2) ◽  
pp. 893-905 ◽  
Author(s):  
Elina Giannakaki ◽  
Panos Kokkalis ◽  
Eleni Marinou ◽  
Nikolaos S. Bartsotas ◽  
Vassilis Amiridis ◽  
...  
Keyword(s):  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Dust Particles ◽  
Depolarization Ratio ◽  
Lidar System ◽  
Lidar Measurements ◽  
Lidar Ratio ◽  
Linear Depolarization Ratio ◽  
Aerosol Types ◽  
532 Nm

Abstract. A new method, called ElEx (elastic extinction), is proposed for the estimation of extinction coefficient lidar profiles using only the information provided by the elastic and polarization channels of a lidar system. The method is applicable to lidar measurements both during daytime and nighttime under well-defined aerosol mixtures. ElEx uses the particle backscatter profiles at 532 nm and the vertically resolved particle linear depolarization ratio measurements at the same wavelength. The particle linear depolarization ratio and the lidar ratio values of pure aerosol types are also taken from literature. The total extinction profile is then estimated and compared well with Raman retrievals. In this study, ElEx was applied in an aerosol mixture of marine and dust particles at Finokalia station during the CHARADMExp campaign. Any difference between ElEx and Raman extinction profiles indicates that the nondust component could be probably attributed to polluted marine or polluted continental aerosols. Comparison with sun photometer aerosol optical depth observations is performed as well during daytime. Differences in the total aerosol optical depth are varying between 1.2 % and 72 %, and these differences are attributed to the limited ability of the lidar to correctly represent the aerosol optical properties in the near range due to the overlap problem.

scholarly journals Characterization of atmospheric pollen with active remote sensing

2021 ◽  
Author(s):  
◽  
Stephanie Bohlmann ◽  
Keyword(s):  
Lower Troposphere ◽  
Wavelength Dependence ◽  
Forest Site ◽  
Depolarization Ratio ◽  
Additional Information ◽  
Lidar Measurements ◽  
Atmospheric Pollen ◽  
Pollen Distribution ◽  
532 Nm ◽  
Depolarization Ratios

Atmospheric pollen is a well-known health threat causing allergy-related diseases. As a biogenic aerosol, pollen also affects the climate by directly absorbing and scattering solar radiation and by acting as cloud condensation or ice nuclei. A good understanding of pollen distribution and transport mechanisms is needed to evaluate the environmental and health impacts of pollen. However, pollen observations are usually performed close to ground and vertical information, which could be used to evaluate and improve pollen transport models, is widely missing. In this thesis, the applicability of lidar measurements to detect pollen in the atmosphere is investigated. For this purpose, measurements of the multiwavelength Raman polarization lidar PollyXT at the rural forest site in Vehmasmäki (Kuopio), Eastern Finland have been utilized. The depolarization ratio was identified to be the most valuable optical property for the detection of atmospheric pollen, as nonspherical pollen like pine and spruce pollen causes high depolarization ratios. However, detected depolarization ratios coincide with typical values for dusty mixtures and additional information such as backward trajectories need to be considered to ensure the absence of other depolarizing aerosols like dust. To separate pollen from background aerosol, a method to estimate the optical properties of pure pollen using lidar measurements was developed. Under the assumption that the Ångström exponent of pure pollen is zero, the depolarization ratio of pure pollen can be estimated. Depolarization ratios for birch and pine pollen at 355 and 532 nm were determined and suggested a wavelength dependence of the depolarization ratio. To further investigate this wavelength dependence, the possibility to use depolarization measurements of Halo Doppler lidars (1565 nm) was explored. In the lower troposphere, Halo Doppler lidars can provide reasonable depolarization values with comparable quality to PollyXT measurements. Finally, measurements of PollyXT and a Halo StreamLine Doppler lidar were used to determine the depolarization ratio at three wavelengths. A wavelength dependence of the particle depolarization ratio with maximum depolarization at 532 nm was found. This could be a characteristic feature of non-spherical pollen and the key to distinguish pollen from other depolarizing aerosol types.

scholarly journals Experimental techniques for the calibration of lidar depolarization channels in EARLINET

2018 ◽  
Vol 11 (2) ◽  
pp. 1119-1141 ◽  
Author(s):  
Livio Belegante ◽  
Juan Antonio Bravo-Aranda ◽  
Volker Freudenthaler ◽  
Doina Nicolae ◽  
Anca Nemuc ◽  
...  
Keyword(s):  
Mass Concentration ◽  
Experimental Techniques ◽  
Driving Factor ◽  
Depolarization Ratio ◽  
Lidar Measurements ◽  
Depolarization Ratios

Abstract. Particle depolarization ratio retrieved from lidar measurements are commonly used for aerosol-typing studies, microphysical inversion, or mass concentration retrievals. The particle depolarization ratio is one of the primary parameters that can differentiate several major aerosol components but only if the measurements are accurate enough. The accuracy related to the retrieval of particle depolarization ratios is the driving factor for assessing and improving the uncertainties of the depolarization products. This paper presents different depolarization calibration procedures used to improve the quality of the depolarization data. The results illustrate a significant improvement of the depolarization lidar products for all the selected lidar stations that have implemented depolarization calibration procedures. The calibrated volume and particle depolarization profiles at 532 nm show values that fall within a range that is generally accepted in the literature.

scholarly journals Benefit of depolarization ratio at λ = 1064 nm for the retrieval of the aerosol microphysics from lidar measurements

2014 ◽  
Vol 7 (11) ◽  
pp. 3773-3781 ◽  
Author(s):  
J. Gasteiger ◽  
V. Freudenthaler
Keyword(s):  
Optical Properties ◽  
Mass Concentration ◽  
Volcanic Ash ◽  
Single Scattering ◽  
Depolarization Ratio ◽  
Complex Relation ◽  
Microphysical Properties ◽  
Lidar Measurements ◽  
Increased Sensitivity ◽  
Linear Depolarization Ratio

Abstract. A better quantification of aerosol properties is required for improving the modelling of aerosol effects on weather and climate. This task is methodologically demanding due to the diversity of the microphysical properties of aerosols and the complex relation between their microphysical and optical properties. Advanced lidar systems provide spatially and temporally resolved information on the aerosol optical properties that is sufficient for the retrieval of important aerosol microphysical properties. Recently, the mass concentration of transported volcanic ash, which is relevant for the flight safety of aeroplanes, was retrieved from measurements of such lidar systems in southern Germany. The relative uncertainty of the retrieved mass concentration was on the order of ±50%. The present study investigates improvements of the retrieval accuracy when the capability of measuring the linear depolarization ratio at 1064 nm is added to the lidar setup. The lidar setups under investigation are based on those of MULIS and POLIS of the Ludwig-Maximilians-Universität in Munich (Germany) which measure the linear depolarization ratio at 355 and 532 nm with high accuracy. The improvements are determined by comparing uncertainties from retrievals applied to simulated measurements of this lidar setup with uncertainties obtained when the depolarization at 1064 nm is added to this setup. The simulated measurements are based on real lidar measurements of transported Eyjafjallajökull volcano ash. It is found that additional 1064 nm depolarization measurements significantly reduce the uncertainty of the retrieved mass concentration and effective particle size. This significant improvement in accuracy is the result of the increased sensitivity of the lidar setup to larger particles. The size dependence of the depolarization does not vary strongly with refractive index, thus we expect similar benefits for the retrieval in case of measurements of other volcanic ash compositions and also for transported desert dust. For the retrieval of the single scattering albedo, which is relevant to the radiative transfer in aerosol layers, no significant improvements were found.

scholarly journals Benefit of depolarization ratio at λ = 1064 nm for the retrieval of the aerosol microphysics from lidar measurements

2014 ◽  
Vol 7 (5) ◽  
pp. 5095-5115
Author(s):  
J. Gasteiger ◽  
V. Freudenthaler
Keyword(s):  
Optical Properties ◽  
Mass Concentration ◽  
Single Scattering ◽  
Sufficient Information ◽  
Depolarization Ratio ◽  
Aerosol Composition ◽  
Microphysical Properties ◽  
Lidar Measurements ◽  
Increased Sensitivity ◽  
Linear Depolarization Ratio

Abstract. A better quantification of aerosol microphysical and optical properties is required to improve the modelling of aerosol effects on weather and climate. This task is methodologically demanding due to the huge diversity of aerosol composition and of their shape and size distribution, and due to the complexity of the relation between the microphysical and optical properties. Lidar remote sensing is a valuable tool to gain spatially and temporally resolved information on aerosol properties. Advanced lidar systems provide sufficient information on the aerosol optical properties for the retrieval of important aerosol microphysical properties. Recently, the mass concentration of transported volcanic ash, which is relevant for the flight safety of airplanes, was retrieved from measurements of such lidar systems in Southern Germany. The relative uncertainty of the retrieved mass concentration was on the order of ±50%. The present study investigates improvements of the retrieval accuracy when the capability of measuring the linear depolarization ratio at 1064 nm is added to the lidar setup. The lidar setups under investigation are based on the setup of MULIS and POLIS of the LMU in Munich which measure the linear depolarization ratio at 355 nm and 532 nm with high accuracy. By comparing results of retrievals applied to simulated lidar measurements with and without the depolarization at 1064 nm it is found that the availability of 1064 nm depolarization measurements reduces the uncertainty of the retrieved mass concentration and effective particle size by a factor of about 2–3. This significant improvement in accuracy is the result of the increased sensitivity of the lidar setup to larger particles. However, the retrieval of the single scattering albedo, which is relevant for the radiative transfer in aerosol layers, does hardly benefit from the availability of 1064 nm depolarization measurements.

scholarly journals The characterization of Taklamakan dust properties using a multi-wavelength Raman polarization lidar in Kashi, China

2020 ◽  
Author(s):  
Qiaoyun Hu ◽  
Haofei Wang ◽  
Philippe Goloub ◽  
Zhengqiang Li ◽  
Igor Veselovskii ◽  
...  
Keyword(s):  
Fine Particles ◽  
Depolarization Ratio ◽  
Taklamakan Desert ◽  
Multi Wavelength ◽  
Lidar Ratio ◽  
Linear Depolarization Ratio ◽  
Dust Events ◽  
532 Nm ◽  
Depolarization Ratios

Abstract. The Taklamakan desert is an important dust source for the global atmospheric dust budget and a cause of the dust weather in Eastern Asia. The characterization of the properties and vertical distributions of Taklamakan dust in the source region is still very limited. To fill this gap, the DAO (Dust Aerosol Observation) was conducted in Kashi, China in 2019. Kashi site is about 150 km to the west rim of the Taklamakan desert and is strongly impacted by desert dust aerosols, especially in spring time, i.e. April and May. Apart from dust, fine particles coming from local anthropogenic emissions or/and transported aerosols are also a non-negligible aerosol component. In this study, we provide the first profiling of the 2α + 3β + 3δ lidar profiles of Taklamakan dust based on a multi-wavelength Raman polarization lidar. Four cases, including two Taklamakan dust events (Case 1 and 2) and two polluted dust events (Case 3 and 4) are presented. The lidar ratio in the Taklamakan dust outbreak is found to be 51 ± 8–56 ± 8 sr at 355 nm and 45 ± 7 sr at 532 nm. The particle linear depolarization ratios are about 0.28 ± 0.04–0.32 ± 0.05 at 355 nm, 0.35 ± 0.05 at 532 nm and 0.31 ± 0.05 at 1064 nm. The observed polluted dust is commonly featured with reduced particle linear depolarization ratio and enhanced extinction and backscatter Angstrom exponent. In Case 3, the lidar ratio of polluted dust is about 42 ± 6 sr at 355 nm and 40 ± 6 sr at 532 nm. The particles linear depolarization ratios decrease to about 0.25, with a weak spectral dependence. In Case 4, the variability of lidar ratio and particle linear depolarization ratio is higher than in Case 3, which reflects the complexity of the nature of mixed pollutant and the mixing state. The results provide the first reference for the characteristics of Taklamakan dust measured by Raman lidar. The data could contribute to complementing the dust model and improving the accuracy of climate modeling.

scholarly journals Vertical variation of optical properties of mixed Asian dust/pollution plumes according to pathway of airmass transport over East Asia

2015 ◽  
Vol 15 (3) ◽  
pp. 3381-3413 ◽  
Author(s):  
S.-K. Shin ◽  
D. Müller ◽  
K. H. Lee ◽  
D. Shin ◽  
Y. J. Kim ◽  
...  
Keyword(s):  
Optical Properties ◽  
Asian Dust ◽  
Optical Characteristics ◽  
Vertical Position ◽  
Depolarization Ratio ◽  
Dust Pollution ◽  
Transport Time ◽  
Lidar Measurements ◽  
The Mean ◽  
532 Nm

Abstract. We use five years (2009–2013) of multiwavelength Raman lidar measurements at Gwangju, Korea (35.10° N, 126.53° E) for the identification of changes of optical properties of East Asian dust in dependence of its transport path over China. Profiles of backscatter and extinction coefficients, lidar ratios, and backscatter-related Ångström exponents (wavelength pair 355/532 nm) were measured at Gwangju. Linear particle depolarization ratios were used to identify East Asian dust layers. We used backward trajectory modelling to identify the pathway and the vertical position of dust-laden air masses over China during long-range transport. Most cases of Asian dust events can be described by the emission of dust in desert areas and subsequent transport over highly polluted regions of China. The Asian dust plumes could be categorized into two classes according to the height above ground in which these plumes were transported: (I) the dust layers passed over China at high altitude levels until arrival over Gwangju, and (II) the Asian dust layers were transported near the surface and the lower troposphere over industrialized areas before they arrived over Gwangju. We find that the optical characteristics of these mixed Asian dust layers over Gwangju differ in dependence of their vertical position above ground over China and the change of height above ground during transport. The mean linear particle depolarization ratio was 0.21 ± 0.06 (at 532 nm), the mean lidar ratios were 52 ± 7 sr at 355 nm and 53 ± 8 sr at 532 nm, and the mean Ångström exponent was 0.74 ± 0.31 in case I. In contrast, plumes transported at lower altitudes (case II) showed low depolarization ratios, and higher lidar ratio and Ångström exponents. The mean linear particle depolarization ratio was 0.13 ± 0.04, the mean lidar ratios were 63 ± 9 sr at 355 nm and 62 ± 8 sr at 532 nm, respectively, and the mean Ångström exponent was 0.98 ± 0.51. These numbers show that the optical characteristics of mixed Asian plumes are more similar to optical characteristics of urban pollution. We find a decrease of the linear depolarization ratio of the mixed dust/pollution plume in dependence of transport time if the pollution layer travelled over China at low heights, i.e., below approximately 3 km above ground. In contrast we do not find such a trend if the dust plumes travelled at heights above 4 km over China. We need a longer time series of lidar measurements in order to determine the change of optical properties of dust with transport time in a quantitative way.

scholarly journals Assessment of aerosol's mass concentrations from measured linear particle depolarization ratio (vertically resolved) and simulations

2013 ◽  
Vol 6 (3) ◽  
pp. 5923-5957
Author(s):  
A. Nemuc ◽  
J. Vasilescu ◽  
C. Talianu ◽  
L. Belegante ◽  
D. Nicolae
Keyword(s):  
Atmospheric Model ◽  
Saharan Dust ◽  
Depolarization Ratio ◽  
Backscatter Coefficient ◽  
Regional Atmospheric Model ◽  
Lidar Measurements ◽  
Different Origins ◽  
532 Nm ◽  
Good Agreement ◽  
Mass Concentrations

Abstract. Multiwavelength depolarization Raman lidar measurements from Magurele, Romania are used in this study along with simulated mass-extinction efficiencies to calculate the mass concentrations profiles of different atmospheric components, due to their different depolarization contribution to the 532 nm backscatter coefficient. Linear particle depolarization ratio (δpart) was computed using the relative amplification factor and the system-dependent molecular depolarization. The low depolarizing component was considered as urban/smoke, with a mean δpart of 3%, while for the high depolarizing component (mineral dust) a mean δpart of 35% was assumed. For this study 11 months of lidar measurements were analyzed. Two study cases are presented in details: one for a typical Saharan dust aerosol intrusion, 10 June 2012 and one for 12 July 2012 when a lofted layer consisting of biomass burning smoke extended from 3 to 4.5 km height. Optical Properties of Aerosols and Clouds software package (OPAC) classification and conversion factors were used to calculate mass concentrations. We found that calibrated depolarization measurements are critical to distinguish between smoke-reach aerosol during the winter and dust-reach aerosol during the summer, as well as between elevated aerosol layers having different origins. Good agreement was found between lidar retrievals and DREAM- Dust REgional Atmospheric Model forecasts in cases of Saharan dust. Our method was also compared against LIRIC (The Lidar/Radiometer Inversion Code) and very small differences were observed.

scholarly journals Vertical distribution of aerosols in the vicinity of Mexico City during MILAGRO-2006 Campaign

2010 ◽  
Vol 10 (3) ◽  
pp. 1017-1030 ◽  
Author(s):  
P. A. Lewandowski ◽  
W. E. Eichinger ◽  
H. Holder ◽  
J. Prueger ◽  
J. Wang ◽  
...  
Keyword(s):  
Size Distribution ◽  
Mexico City ◽  
Mass Concentration ◽  
Heavy Traffic ◽  
Aerosol Size Distribution ◽  
Lidar System ◽  
Aerosol Mass ◽  
Aerosol Mass Concentration ◽  
Lidar Measurements ◽  
Ground Based Lidar

Abstract. On 7 March 2006, a mobile, ground-based, vertical pointing, elastic lidar system made a North-South transect through the Mexico City basin. Column averaged, aerosol size distribution (ASD) measurements were made on the ground concurrently with the lidar measurements. The ASD ground measurements allowed calculation of the column averaged mass extinction efficiency (MEE) for the lidar system (1064 nm). The value of column averaged MEE was combined with spatially resolved lidar extinction coefficients to produce total aerosol mass concentration estimates with the resolution of the lidar (1.5 m vertical spatial and 1 s temporal). Airborne ASD measurements from DOE G-1 aircraft made later in the day on 7 March 2006, allowed the evaluation of the assumptions of constant ASD with height and time used for estimating the column averaged MEE. The results showed that the aerosol loading within the basin is about twice what is observed outside of the basin. The total aerosol base concentrations observed in the basin are of the order of 200 μg/m3 and the base levels outside are of the order of 100 μg/m3. The local heavy traffic events can introduce aerosol levels near the ground as high as 900 μg/m3. The article presents the methodology for estimating aerosol mass concentration from mobile, ground-based lidar measurements in combination with aerosol size distribution measurements. An uncertainty analysis of the methodology is also presented.

Sign in / Sign up

Export Citation Format

Share Document