A Buoyant Eifel Mantle Plume Revealed by GPS-Derived Large-Scale 3D Surface Deformation

Author(s):  
Corné Kreemer ◽  
Geoffrey Blewitt ◽  
Paul Davis

<p> The Eifel hotspot is one of the few known active continental hotspots. The evidence is based on volcanism as recent as 11ka and a seismic velocity anomaly that shows a plume-like feature downward to at least the upper transition zone. However, the volcanism lacks a clear space-time progression of activity, and evidence for surface deformation has been ambiguous. Here, we show that the greater area above the Eifel plume shows a distinct and significant surface deformation anomaly not seen anywhere else in intraplate Europe. We use GPS data of thousands of stations in western Europe to image contemporary vertical land motion (VLM) and horizontal strain rates. We show significant surface uplift rates with a maximum of ~1.0 mm/yr (after subtracting the broader-scale VLM predicted by glacial isostatic adjustment) roughly centered on the Eifel Volcanic Field, and above the mantle plume. The same area that uplifts also undergoes significant N-S-oriented extension of ~3 nanostrain/yr, and this area is surrounded by a radial pattern of shortening. River terrace data have revealed tectonic uplift of <span>~</span>150–250 m of the Eifel since 800 ka, when recent volcanism and uplift reactivated, which would imply an average VLM of <span>0.1</span>–<span>0.3 mm/yr </span>since that time. Our VLM results suggest that the uplift may have accelerated significantly since Quaternary volcanism commenced. <span>The remarkable superimposition of significant uplift, horizontal extension, and volcanism strongly suggests a causal relationship with the underlying mantle plume. We</span><span> model the plume buoyancy as a half-space vertical force applied to a bi-modal Gaussian areal distribution exerted on a plane at 50 km depth. </span><span>Our modelling shows a good regional fit to the long-wavelength aspects of the surface deformation by applying buoyancy forces related to the plume head at the bottom of the lithosphere. From our spatially integrated force and the first-order assumption that the plume has effectively been buoyant since 250 ka (to explain Quaternary uplift) or 800 ka (at today’s rate), we estimate that a 360 km high plume requires density reduction of 57-184 kg m</span><sup><span>-3</span></sup><span> (i.e., ~0.7-5.6% of a 3300 kg m</span><sup><span>-3</span></sup><span> dense reference mantle), which is consistent with observed seismic velocity reductions. Finally, we note that the highest extension rates are centred on the Lower Rhine Embayment (LRE), where intraplate seismicity rates are high, and where paleoseismic events increased since 800 ka. We suggest that the surface uplift imposed by the Eifel plume explains the relatively high activity rate on faults along the LRE, particularly since the N-S extension would promote failure on the NW-SE trending faults in the LRE.</span></p>

2020 ◽  
Vol 222 (2) ◽  
pp. 1316-1332 ◽  
Author(s):  
Corné Kreemer ◽  
Geoffrey Blewitt ◽  
Paul M Davis

SUMMARY The volcanism of the Eifel volcanic field (EVF), in west-central Germany, is often considered an example of hotspot volcanism given its geochemical signature and the putative mantle plume imaged underneath. EVF's setting in a stable continental area provides a rare natural laboratory to image surface deformation and test the hypothesis of there being a thermally buoyant plume. Here we use Global Positioning System (GPS) data to robustly image vertical land motion (VLM) and horizontal strain rates over most of intraplate Europe. We find a spatially coherent positive VLM anomaly over an area much larger than the EVF and with a maximum uplift of ∼1 mm yr−1 at the EVF (when corrected for glacial isostatic adjustment). This rate is considerably higher than averaged over the Late-Quaternary. Over the same area that uplifts, we find significant horizontal extension surrounded by a radial pattern of shortening, a superposition that strongly suggests a common dynamic cause. Besides the Eifel, no other area in NW Europe shows significant positive VLM coupled with extensional strain rates, except for the much broader region of glacial isostatic adjustment. We refer to this 3-D deformation anomaly as the Eifel Anomaly. We also find an extensional strain rate anomaly near the Massif Central volcanic field surrounded by radial shortening, but we do not detect a significant positive VLM signal there. The fact that the Eifel Anomaly is located above the Eifel plume suggests that the plume causes the anomaly. Indeed, we show that buoyancy forces induced by the plume at the bottom of the lithosphere can explain this remarkable surface deformation. Plume-induced deformation can also explain the relatively high rate of regional seismicity, particularly along the Lower Rhine Embayment.


2021 ◽  
Vol 69 (3) ◽  
Author(s):  
S. J. Eder ◽  
P. G. Grützmacher ◽  
M. Rodríguez Ripoll ◽  
J. F. Belak

Abstract Depending on the mechanical and thermal energy introduced to a dry sliding interface, the near-surface regions of the mated bodies may undergo plastic deformation. In this work, we use large-scale molecular dynamics simulations to generate “differential computational orientation tomographs” (dCOT) and thus highlight changes to the microstructure near tribological FCC alloy surfaces, allowing us to detect subtle differences in lattice orientation and small distances in grain boundary migration. The analysis approach compares computationally generated orientation tomographs with their undeformed counterparts via a simple image analysis filter. We use our visualization method to discuss the acting microstructural mechanisms in a load- and time-resolved fashion, focusing on sliding conditions that lead to twinning, partial lattice rotation, and grain boundary-dominated processes. Extracting and laterally averaging the color saturation value of the generated tomographs allows us to produce quantitative time- and depth-resolved maps that give a good overview of the progress and severity of near-surface deformation. Corresponding maps of the lateral standard deviation in the color saturation show evidence of homogenization processes occurring in the tribologically loaded microstructure, frequently leading to the formation of a well-defined separation between deformed and undeformed regions. When integrated into a computational materials engineering framework, our approach could help optimize material design for tribological and other deformation problems. Graphic Abstract .


2021 ◽  
Vol 13 (5) ◽  
pp. 874
Author(s):  
Yu Chen ◽  
Mohamed Ahmed ◽  
Natthachet Tangdamrongsub ◽  
Dorina Murgulet

The Nile River stretches from south to north throughout the Nile River Basin (NRB) in Northeast Africa. Ethiopia, where the Blue Nile originates, has begun the construction of the Grand Ethiopian Renaissance Dam (GERD), which will be used to generate electricity. However, the impact of the GERD on land deformation caused by significant water relocation has not been rigorously considered in the scientific research. In this study, we develop a novel approach for predicting large-scale land deformation induced by the construction of the GERD reservoir. We also investigate the limitations of using the Gravity Recovery and Climate Experiment Follow On (GRACE-FO) mission to detect GERD-induced land deformation. We simulated three land deformation scenarios related to filling the expected reservoir volume, 70 km3, using 5-, 10-, and 15-year filling scenarios. The results indicated: (i) trends in downward vertical displacement estimated at −17.79 ± 0.02, −8.90 ± 0.09, and −5.94 ± 0.05 mm/year, for the 5-, 10-, and 15-year filling scenarios, respectively; (ii) the western (eastern) parts of the GERD reservoir are estimated to move toward the reservoir’s center by +0.98 ± 0.01 (−0.98 ± 0.01), +0.48 ± 0.00 (−0.48 ± 0.00), and +0.33 ± 0.00 (−0.33 ± 0.00) mm/year, under the 5-, 10- and 15-year filling strategies, respectively; (iii) the northern part of the GERD reservoir is moving southward by +1.28 ± 0.02, +0.64 ± 0.01, and +0.43 ± 0.00 mm/year, while the southern part is moving northward by −3.75 ± 0.04, −1.87 ± 0.02, and −1.25 ± 0.01 mm/year, during the three examined scenarios, respectively; and (iv) the GRACE-FO mission can only detect 15% of the large-scale land deformation produced by the GERD reservoir. Methods and results demonstrated in this study provide insights into possible impacts of reservoir impoundment on land surface deformation, which can be adopted into the GERD project or similar future dam construction plans.


Geophysics ◽  
1994 ◽  
Vol 59 (1) ◽  
pp. 87-92 ◽  
Author(s):  
Gary Mavko ◽  
Diane Jizba

Seismic velocity dispersionin fluid-saturated rocks appears to be dominated by tow mecahnisms: the large scale mechanism modeled by Biot, and the local flow or squirt mecahnism. The tow mechanisms can be distuinguished by the ratio of P-to S-wave dispersions, or more conbeniently, by the ratio of dynamic bulk to shear compliance dispersions derived from the wave velocities. Our formulation suggests that when local flow denominates, the dispersion of the shear compliance will be approximately 4/15 the dispersion of the compressibility. When the Biot mechanism dominates, the constant of proportionality is much smaller. Our examination of ultrasonic velocities from 40 sandstones and granites shows that most, but not all, of the samples were dominated by local flow dispersion, particularly at effective pressures below 40 MPa.


2021 ◽  
Author(s):  
Mohamed Sobh ◽  
Khaled Zahran ◽  
Nils Holzrichter ◽  
Christian Gerhards

<p><span>Widespread Cenozoic volcanisms in the Arabian shield including “Harrats” have been referring to lithospheric thinning and/or mantle plume activity as a result of Red Sea rift-related extension.</span></p><p><span>A fundamental key in understanding the deriving mechanism of these volcanic activities and its relationship to 2007-2009 seismic swarms required a reliable model of the present-day lithospheric thermo-chemical structure.</span></p><p><span>In this work, we modeled crustal and lithospheric thickness variation as well as the variations in thermal, composition, seismic velocity, and density of the lithosphere beneath the Arabian shield within a thermodynamically self - consistent framework.</span></p><p><span>The resulting thermal and density structures show large variations, revealing strong asymmetry between the Arabian shield and Arabian platform within the Arabian Plate.</span></p><p><span>We model negative density anomalies associated with the hot mantle beneath Harrats, which coincides with the modelled lithosphere thinned (~ 65 km) as a result of the second stage of lithospheric thinning following the initial Red Sea extension.</span></p>


Author(s):  
Hugh P. Taylor

ABSTRACTOxygen isotope data are very useful in determining the source rocks of granitic magmas, particularly when used in combination with Sr, Pb, and Nd isotope studies. For example, unusually high δ18O values in magmas (δ18O> +8) require the involvement of some precursor parent material that at some time in the past resided on or near the Earth's surface, either as sedimentary rocks or as weathered or hydrothermally altered rocks. The isotopic systematics which are preserved in the Mesozoic and Cenozoic batholiths of western North America can be explained by grand-scale mixing of three broadly defined end-members: (1) oceanic island-arc magmas derived from a “depleted” (MORB-type?) source in the upper mantle (δ18O c. +6 and 87Sr/86Sr c. 0·703); (2) a high-18O (c. +13 to +17) source with a very uniform 87Sr/86Sr (c. 0·708 to 0·712), derived mainly from eugeosynclinal volcanogenic sediments and (or) hydrothermally altered basalts; and (3) a much more heterogeneous source (87Sr/86Sr c. 0·706 to 0·750, or higher) with a high δ18O (c. +9 to +15) where derived from supracrustal metasedimentary rocks and a much lower δ18O (c. +7 to +9) where derived from the lower continental crust of the craton. These end-members were successively dominant from W to E, respectively, within three elongate N–S geographic zones that can be mapped from Mexico all the way N to Idaho.18O/16O studies (together with D/H analyses) can, however, play a more important and certainly a unique role in determining the origins of the aqueous fluids involved in the formation of granitic and rhyolitic magmas. Fluid-rock interaction effects are most clear-cut when low-18O, low-D meteoric waters are involved in the isotopic exchange and melting processes, but the effects of other waters such as seawater (with a relatively high δD c. 0) can also be recognised. Because of these hydrothermal processes, rocks that ultimately undergo partial melting may exhibit isotopic signatures considerably different from those that they started with. We discuss three broad classes of potential source materials of such “hydrothermal-anatectic” granitic magmas, based mainly on water/rock (w/r), temperature (T), and the length of time (t) that fluid-rock interaction proceeds: (Type 1) epizonal systems with a wide variation in whole-rock δ18O and extreme 18O/16O disequilibrium among coexisting minerals (e.g. quartz and feldspar); (Type 2) deeper-seated and (or) longer-lived systems, also with a wide spectrum of whole-rock δ18O, but with equilibrated 18O/16O ratios among coexisting minerals; (Type 3) thoroughly homogenised and equilibrated systems with relatively uniform δ18O in all lithologies. Low-18O magmas formed by melting of rocks altered in a Type 2 or a Type 3 meteoric-hydrothermal system are the only kinds of “hydrothermal-anatectic” granitic magmas that are readily recognisable in the geological record. Analogous effects produced by other kinds of aqueous fluids may, however, be quite common, particularly in areas of extensional tectonics and large-scale rifting. The greatly enhanced permeabilities in such fractured terranes make possible the deep convective circulation of ground waters and sedimentary pore fluids. The nature and origin of low-18O magmas in the Yellowstone volcanic field and the Seychelles Islands are briefly reviewed in light of these concepts, as is the development of high-D, peraluminous magmas in the Hercynian of the Pyrenees.


2021 ◽  
Author(s):  
Chun-Man Liao ◽  
Franziska Mehrkens ◽  
Celine Hadziioannou ◽  
Ernst Niederleithinger

<p>The aim of this work is to investigate the application of seismological noise-based monitoring for bridge structures. A large-scale two-span concrete bridge model with a build-in post-tensioning system, which is exposed to environmental conditions, is chosen as our experimental test structure. Ambient seismic noise measurements were carried out under different pre-stressed conditions. Using the seismic interferometry technique, which is applied to the measurement data in the frequency domain, we reconstruct waveforms that relate to wave propagation in the structure. The coda wave interferometry technique is then implemented by comparing two waveforms recorded in two pre-stress states. Any relative seismic velocity changes are identified by determining the correlation coefficients and reveal the influence of the pre-stressing force. The decrease of the wave propagation velocity indicates the loss of the pre-stress and weakening stiffness due to opening or event extension of cracks. We conclude that the seismological methods used to estimate velocity change can be a promising tool for structural health monitoring of civil structures.</p>


2021 ◽  
Author(s):  
Julien Gance ◽  
Orlando Leite ◽  
Myriam Lajaunie ◽  
Kusnahadi Susanto ◽  
Catherine Truffert ◽  
...  

<p>Large scale slope instabilities are complex objects controlled by multiple parameters. The underground and superficial structure of the slope plays a major role as it often controls water circulations, potentially causing weathering and damaging processes, and permits the local storage of water masses, causing temporary overload. In addition, the structure of the subsurface often delineates rock-volumes with variable mechanical properties, whose spatial distribution greatly influences the behavior of the slope. This work illustrates how Dense 3D Electrical Resistivity Tomography can provide relevant constraints on these parameters.</p><p>The village of Viella, in France (Hautes-Pyrénées), is affected by strong slope movement since 2018, when a massive rockslide above the village modified the stress conditions of the entire slope and, potentially, the hydrogeological context. As a consequence, some houses and infrastructures are progressively damaged, leading to heavy measures (houses evacuation). This complex, deep-seated (> 80 m), slope instability covers an area of ca. 650 000 m², is primarily composed of altered shists, colluviums, and non-consolidated alluvial deposits, forming several kinematic units with surface velocities in the range [0.5 – 5] mm.month<sup>-1</sup>.</p><p> </p><p>A 3D dense electrical resistivity tomography was realized using the FullWaver system, to characterize the structure and the forcing factors of this unstable slope. 55 V-FullWavers receivers (3 -electrodes, 2 channels sensors) were quasi-evenly distributed over a surface area of 400 x 500 m² with an interval of 90 m, apart from the village area, where no electrode could be grounded. Each V-FullWaver recorded signals through two orthogonal dipoles of 25 m length. Current injections were realized with a high-power transmitter (6 kW, 16 A, 3000 V). 235 injection dipoles were used. The system injected current between a fixed remote electrode (more than 1 km away from the site to increase the investigation depth) and a local mobile electrode, moved all over the investigated area in between the V-Fullwaver receivers, with an interval of approximately 40 m, except in the village area.</p><p> </p><p>The resulting 3D resistivity model presents a high spatial variability until 100 to 150 m depth approximately, that highly relates to the complex strain dynamics of the slope and the hydrogeological observations. It highlights the relation between the most active kinematic compartments and the large-scale structure of the slope.</p><p>It provides a first understanding of the role of local compacted rocks in the buildup of surface deformation but also on the localization of heterogeneities (fissures, scarps) which may relate to water circulation paths.</p><p>. This 3D image of the slope is the first structural reference model for future hydrogeological and geomechanical studies aiming at deducing the possible evolution of the slope.</p>


Sign in / Sign up

Export Citation Format

Share Document