scholarly journals Development of a semi-distributed hydrological model on a tidal-affected river: application to the Adour catchment, France.

2020 ◽  
Author(s):  
Valentin Mansanarez ◽  
Guillaume Thirel ◽  
Olivier Delaigue ◽  
Benoit Liquet
Keyword(s):  
Hydrological Model ◽  
Potential Evapotranspiration ◽  
River Mouth ◽  
Model Parameters ◽  
Distributed Hydrological Model ◽  
Natural Systems ◽  
Tidal Influence ◽  
Novel Approach ◽  
Spatio Temporal ◽  
Parameter Values

<p>Streamflow estimation from rain events is a delicate exercise. Watersheds are complex natural systems and their response to rainfall events is influenced by many factors. Hydrological rainfall-runoff modelling is traditionally used to understand those factors by predicting discharges from precipitation data. These models are simplified conceptualisations and thus still struggle when facing some particular processes linked to the catchment. Among those processes, the tide influence on river discharges is rarely accounted for in hydrological modelling when estimating streamflow series at river mouth areas. Instead, estimated streamflow series are sometimes corrected by coefficients to account for the tide effect.</p><p>In this presentation, we explored a semi-distributed hydrological model by adapting it to account for tidal-influence in the river mouth area. This model uses observed spatio-temporal rainfall and potential evapotranspiration databases to predict streamflow at gauged and ungauged locations within the catchment. The hydrological model is calibrated using streamflow observations and priors on parameter values to calibrate each model parameters of each sub-catchments. A drift procedure in the calibration process is used to ensure continuity in parameter values between upstream and downstream successive sub-catchments.</p><p>This novel approach was applied to a tidal-affected catchment: the Adour’s catchment in southern France. Estimated results were compared to simulations without accounting for the tidal influence. Results from the new hydrological model were improved at tidal-affected locations of the catchment. They also show similar estimations in tidal-unaffected part of the catchment.</p>

scholarly journals Diagnostic calibration of a hydrological model in an alpine area

2014 ◽  
Vol 11 (1) ◽  
pp. 1253-1300 ◽  
Author(s):  
Z. He ◽  
F. Tian ◽  
H. C. Hu ◽  
H. V. Gupta ◽  
H. P. Hu
Keyword(s):  
Hydrological Modeling ◽  
Hydrological Model ◽  
Generation Mechanism ◽  
Spatiotemporal Variability ◽  
Model Parameters ◽  
Distributed Hydrological Model ◽  
Runoff Generation ◽  
Alpine Area ◽  
Long Time ◽  
Tailan River Basin

Abstract. Hydrological modeling depends on single- or multiple-objective strategies for parameter calibration using long time sequences of observed streamflow. Here, we demonstrate a diagnostic approach to the calibration of a hydrological model of an alpine area in which we partition the hydrograph based on the dominant runoff generation mechanism (groundwater baseflow, glacier melt, snowmelt, and direct runoff). The partitioning reflects the spatiotemporal variability in snowpack, glaciers, and temperature. Model parameters are grouped by runoff generation mechanism, and each group is calibrated separately via a stepwise approach. This strategy helps to reduce the problem of equifinality and, hence, model uncertainty. We demonstrate the method for the Tailan River basin (1324 km2) in the Tianshan Mountains of China with the help of a semi-distributed hydrological model (THREW).

scholarly journals Spatial pattern evaluation of a calibrated national hydrological model – a remote sensing based diagnostic approach

2017 ◽  
Author(s):  
Gorka Mendiguren ◽  
Julian Koch ◽  
Simon Stisen
Keyword(s):  
Remote Sensing ◽  
Spatial Pattern ◽  
Spatial Patterns ◽  
Hydrological Model ◽  
Remote Sensing Data ◽  
Driving Mechanism ◽  
Distributed Hydrological Model ◽  
Eof Analysis ◽  
Sensing Data ◽  
Spatio Temporal

Abstract. Distributed hydrological models are traditionally evaluated against discharge stations, emphasizing the temporal and neglecting the spatial component of a model. The present study widens the traditional paradigm by highlighting spatial patterns of evapotranspiration (ET), a key variable at the land-atmosphere interface, obtained from two different approaches at the national scale of Denmark. The first approach is based on a national water resources model (DK-model), using the MIKE-SHE model code, and the second approach utilizes a two source energy balance model (TSEB) driven mainly by satellite remote sensing data. The main hypothesis of the study is that while both approaches are essentially estimates, the spatial patterns of the remote sensing based approach are explicitly driven by observed land surface temperature and therefore represent the most direct spatial pattern information of ET; enabling its use for distributed hydrological model evaluation. Ideally the hydrological model simulation and remote sensing based approach should present similar spatial patterns and driving mechanism of ET. However, the spatial comparison showed that the differences are significant and indicating insufficient spatial pattern performance of the hydrological model. The differences in spatial patterns can partly be explained by the fact that the hydrological model is configured to run in 6 domains that are calibrated independently from each other, as it is often the case for large scale multi-basin calibrations. Furthermore, the model incorporates predefined temporal dynamics of Leaf Area Index (LAI), root depth (RD) and Crop coefficient (Kc) for each land cover type. This zonal approach of model parametrization ignores the spatio-temporal complexity of the natural system. To overcome this limitation, the study features a modified version of the DK-Model in which LAI, RD, and KC are empirically derived using remote sensing data and detailed soil property maps in order to generate a higher degree of spatio-temporal variability and spatial consistency between the 6 domains. The effects of these changes are analyzed by using the empirical orthogonal functions (EOF) analysis to evaluate spatial patterns. The EOF-analysis shows that including remote sensing derived LAI, RD and KC in the distributed hydrological model adds spatial features found in the spatial pattern of remote sensing based ET.

scholarly journals Analysis of the spatial variation in the parameters of the SWAT model with application in Flanders, Northern Belgium

2004 ◽  
Vol 8 (5) ◽  
pp. 931-939 ◽  
Author(s):  
G. Heuvelmans ◽  
B. Muys ◽  
J. Feyen
Keyword(s):  
Stream Flow ◽  
Hydrological Model ◽  
Swat Model ◽  
Single Parameter ◽  
Model Parameters ◽  
Study Region ◽  
Entire Study ◽  
Time Periods ◽  
Parameter Values ◽  
Parameter Approach

Abstract. Operational applications of a hydrological model often require the prediction of stream flow in (future) time periods without stream flow observations or in ungauged catchments. Data for a case-specific optimisation of model parameters are not available for such applications, so parameters have to be derived from other catchments or time periods. It has been demonstrated that for applications of the SWAT in Northern Belgium, temporal transfers of the parameters have less influence than spatial transfers on the performance of the model. This study examines the spatial variation in parameter optima in more detail. The aim was to delineate zones wherein model parameters can be transferred without a significant loss of model performance. SWAT was calibrated for 25 catchments that are part of eight larger sub-basins of the Scheldt river basin. Two approaches are discussed for grouping these units in zones with a uniform set of parameters: a single parameter approach considering each parameter separately and a parameter set approach evaluating the parameterisation as a whole. For every catchment, the SWAT model was run with the local parameter optima, with the average parameter values for the entire study region (Flanders), with the zones delineated with the single parameter approach and with the zones obtained by the parameter set approach. Comparison of the model performances of these four parameterisation strategies indicates that both the single parameter and the parameter set zones lead to stream flow predictions that are more accurate than if the entire study region were treated as one single zone. On the other hand, the use of zonal average parameter values results in a considerably worse model fit compared to local parameter optima. Clustering of parameter sets gives a more accurate result than the single parameter approach and is, therefore, the preferred technique for use in the parameterisation of ungauged sub-catchments as part of the simulation of a large river basin. Keywords: hydrological model, regionalisation, parameterisation, spatial variability

scholarly journals Improving streamflow predictions at ungauged locations with real-time updating: application of an EnKF-based state-parameter estimation strategy

2014 ◽  
Vol 18 (10) ◽  
pp. 3923-3936 ◽  
Author(s):  
X. Xie ◽  
S. Meng ◽  
S. Liang ◽  
Y. Yao
Keyword(s):  
Real Time ◽  
Land Surface ◽  
Hydrological Model ◽  
Similarity Measures ◽  
State Parameter ◽  
Model Parameters ◽  
Prediction Errors ◽  
Distributed Hydrological Model ◽  
Streamflow Prediction ◽  
Short Period

Abstract. The challenge of streamflow predictions at ungauged locations is primarily attributed to various uncertainties in hydrological modelling. Many studies have been devoted to addressing this issue. The similarity regionalization approach, a commonly used strategy, is usually limited by subjective selection of similarity measures. This paper presents an application of a partitioned update scheme based on the ensemble Kalman filter (EnKF) to reduce the prediction uncertainties. This scheme performs real-time updating for states and parameters of a distributed hydrological model by assimilating gauged streamflow. The streamflow predictions are constrained by the physical rainfall-runoff processes defined in the distributed hydrological model and by the correlation information transferred from gauged to ungauged basins. This scheme is successfully demonstrated in a nested basin with real-world hydrological data where the subbasins have immediate upstream and downstream neighbours. The results suggest that the assimilated observed data from downstream neighbours have more important roles in reducing the streamflow prediction errors at ungauged locations. The real-time updated model parameters remain stable with reasonable spreads after short-period assimilation, while their estimation trajectories have slow variations, which may be attributable to climate and land surface changes. Although this real-time updating scheme is intended for streamflow predictions in nested basins, it can be a valuable tool in separate basins to improve hydrological predictions by assimilating multi-source data sets, including ground-based and remote-sensing observations.

scholarly journals PUBs for Engineering Purpose: Framework Development and Case Study

10.29007/9kpv ◽  
2018 ◽  
Author(s):  
Yang Zhiyong ◽  
Gao Xichao ◽  
Liu Jiahong
Keyword(s):  
Hydrological Model ◽  
Potential Evapotranspiration ◽  
Meteorological Data ◽  
Distributed Hydrological Model ◽  
Runoff Simulation ◽  
Annual Average ◽  
Sensing Technology ◽  
Watershed Method ◽  
Predictions In Ungauged Basins

A framework of predictions in ungauged basins (PUBs, taking Paniai lakes watershed, Indonesia as an example) for hydropower exploration is developed. In this framework, remote sensing technology and similar watershed method are used to collect necessary meteorological and topographical data for runoff simulation. Besides, a modified physical based distributed hydrological model is developed to consider the characteristics (regulation capacity of the lakes) of the watershed. Finally, considering the modeling purpose, annual average runoff index is used to assess the modeling results. In the case study (Paniai lakes watershed), TRMM precipitation, HWSD soil type, and AVHRR landcover data, combined with meteorological data from two similar watersheds, are collected to drive the modified hydrological model. According to the model results, the simulated potential evapotranspiration capacities and annual average runoff coefficients are consistent between the two cases (modeling with meteorological data of the two similar watersheds), and the simulated annual average runoff coefficients of the two cases are basically consistent with the observed annual average runoff coefficient of another similar watershed located in Indonesia.

scholarly journals Effect of length of the observed dataset on the calibration of a distributed hydrological model

2015 ◽  
Vol 368 ◽  
pp. 305-311 ◽  
Author(s):  
X. Cui ◽  
W. Sun ◽  
J. Teng ◽  
H. Song ◽  
X. Yao
Keyword(s):  
Hydrological Model ◽  
Assessment Tool ◽  
Swat Model ◽  
Model Performance ◽  
Hydrological Models ◽  
Distributed Hydrological Model ◽  
Discharge Data ◽  
One Year ◽  
Parameter Values ◽  
Discharge Measurements

Abstract. Calibration of hydrological models in ungauged basins is now a hot research topic in the field of hydrology. In addition to the traditional method of parameter regionalization, using discontinuous flow observations to calibrate hydrological models has gradually become popular in recent years. In this study, the possibility of using a limited number of river discharge data to calibrate a distributed hydrological model, the Soil and Water Assessment Tool (SWAT), was explored. The influence of the quantity of discharge measurements on model calibration in the upper Heihe Basin was analysed. Calibration using only one year of daily discharge measurements was compared with calibration using three years of discharge data. The results showed that the parameter values derived from calibration using one year’s data could achieve similar model performance with calibration using three years’ data, indicating that there is a possibility of using limited numbers of discharge data to calibrate the SWAT model effectively in poorly gauged basins.

scholarly journals Extending flood forecasting lead time in large watershed by coupling WRF QPF with distributed hydrological model

2016 ◽  
Author(s):  
Ji Li ◽  
Yangbo Chen ◽  
Huanyu Wang ◽  
Jianming Qin ◽  
Jie Li
Keyword(s):  
Lead Time ◽  
Hydrological Model ◽  
Southern China ◽  
Weather Forecast ◽  
Forecast Model ◽  
Flood Forecasting ◽  
Rain Gauge ◽  
Model Parameters ◽  
Distributed Hydrological Model ◽  
Flood Warning

Abstract. Long lead time flood forecasting is very important for large watershed flood mitigation as it provides more time for flood warning and emergency responses. Latest numerical weather forecast model could provide 1–15 days quantitative precipitation forecasting products at grid format, by coupling this product with distributed hydrological model could produce long lead time watershed flood forecasting products. This paper studied the feasibility of coupling the Liuxihe Model with the WRF QPF for a large watershed flood forecasting in southern China. The QPF of WRF products has three lead time, including 24 hour, 48 hour and 72 hour, the grid resolution is 20 km × 20 km. The Liuxihe Model is set up with freely downloaded terrain property, the model parameters were previously optimized with rain gauge observed precipitation, and re-optimized with WRF QPF. Results show that the WRF QPF has bias with the rain gauge precipitation, and a post-processing method is proposed to post process the WRF QPF products, which improves the flood forecasting capability. With model parameter re-optimization, the model's performance improves also, it suggests that the model parameters be optimized with QPF, not the rain gauge precipitation. With the increasing of lead time, the accuracy of WRF QPF decreases, so does the flood forecasting capability. Flood forecasting products produced by coupling Liuxihe Model with WRF QPF provides good reference for large watershed flood warning due to its long lead time and rational results.

scholarly journals Sensitivity of a data-assimilation system for reconstructing three-dimensional cardiac electrical dynamics

2020 ◽  
Vol 378 (2173) ◽  
pp. 20190388 ◽  
Author(s):  
Matthew J. Hoffman ◽  
Elizabeth M. Cherry
Keyword(s):  
Data Assimilation ◽  
Temporal Dynamics ◽  
Complex Dynamics ◽  
Three Dimensional ◽  
Model Error ◽  
Model Parameters ◽  
Ensemble Spread ◽  
Spatio Temporal ◽  
System States ◽  
Parameter Values

Modelling of cardiac electrical behaviour has led to important mechanistic insights, but important challenges, including uncertainty in model formulations and parameter values, make it difficult to obtain quantitatively accurate results. An alternative approach is combining models with observations from experiments to produce a data-informed reconstruction of system states over time. Here, we extend our earlier data-assimilation studies using an ensemble Kalman filter to reconstruct a three-dimensional time series of states with complex spatio-temporal dynamics using only surface observations of voltage. We consider the effects of several algorithmic and model parameters on the accuracy of reconstructions of known scroll-wave truth states using synthetic observations. In particular, we study the algorithm’s sensitivity to parameters governing different parts of the process and its robustness to several model-error conditions. We find that the algorithm can achieve an acceptable level of error in many cases, with the weakest performance occurring for model-error cases and more extreme parameter regimes with more complex dynamics. Analysis of the poorest-performing cases indicates an initial decrease in error followed by an increase when the ensemble spread is reduced. Our results suggest avenues for further improvement through increasing ensemble spread by incorporating additive inflation or using a parameter or multi-model ensemble. This article is part of the theme issue ‘Uncertainty quantification in cardiac and cardiovascular modelling and simulation’.

Sign in / Sign up

Export Citation Format

Share Document