scholarly journals Presentation and discussion of the high resolution atmosphere-land surface subsurface simulation dataset of the virtual Neckar catchment for the period 2007–2015

2020 ◽  
Author(s):  
Bernd Schalge ◽  
Gabriele Baroni ◽  
Barbara Haese ◽  
Daniel Erdal ◽  
Gernot Geppert ◽  
...  
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Overland Flow ◽  
Water Cycle ◽  
Numerical Models ◽  
Model Performance ◽  
Surface Model ◽  
Meteorological Model ◽  
The Real ◽  
Terrestrial System

Abstract. Coupled numerical models, which simulate water and energy fluxes in the subsurface-land surface-atmosphere system in a physically consistent way are a prerequisite for the analysis and a better understanding of heat and matter exchange fluxes at compartmental boundaries and interdependencies of states across these boundaries. Complete state evolutions generated by such models may be regarded as a proxy of the real world, provided they are run at sufficiently high resolution and incorporate the most important processes. Such a virtual reality can be used to test hypotheses on the functioning of the coupled terrestrial system. Coupled simulation systems, however, face severe problems caused by the vastly different scales of the processes acting in and between the compartments of the terrestrial system, which also hinders comprehensive tests of their realism. We used the Terrestrial Systems Modeling Platform TerrSysMP, which couples the meteorological model COSMO, the land-surface model CLM, and the subsurface model ParFlow, to generate a virtual catchment for a regional terrestrial system mimicking the Neckar catchment in southwest Germany. Simulations for this catchment are made for the period 2007–2015, and at a spatial resolution of 400 m for the land surface and subsurface and 1.1 km for the atmosphere. Among a discussion of modelling challenges, the model performance is evaluated based on real observations covering several variables of the water cycle. We find that the simulated (virtual) catchment behaves in many aspects quite close to observations of the real Neckar catchment, e.g. concerning atmospheric boundary-layer height, precipitation, and runoff. But also discrepancies become apparent, both in the ability of the model to correctly simulate some processes which still need improvement such as overland flow, and in the realism of some observation operators like the satellite based soil moisture sensors. The whole raw dataset is available for interested users. The dataset described here is available via the CERA database (Schalge et al., 2020): https://doi.org/10.26050/WDCC/Neckar_VCS_v1.

scholarly journals Presentation and discussion of the high-resolution atmosphere–land-surface–subsurface simulation dataset of the simulated Neckar catchment for the period 2007–2015

2021 ◽  
Vol 13 (9) ◽  
pp. 4437-4464
Author(s):  
Bernd Schalge ◽  
Gabriele Baroni ◽  
Barbara Haese ◽  
Daniel Erdal ◽  
Gernot Geppert ◽  
...  
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Overland Flow ◽  
Water Cycle ◽  
Numerical Models ◽  
Model Performance ◽  
Small Scale ◽  
The Real ◽  
Community Land Model ◽  
Terrestrial System

Abstract. Coupled numerical models, which simulate water and energy fluxes in the subsurface–land-surface–atmosphere system in a physically consistent way, are a prerequisite for the analysis and a better understanding of heat and matter exchange fluxes at compartmental boundaries and interdependencies of states across these boundaries. Complete state evolutions generated by such models may be regarded as a proxy of the real world, provided they are run at sufficiently high resolution and incorporate the most important processes. Such a simulated reality can be used to test hypotheses on the functioning of the coupled terrestrial system. Coupled simulation systems, however, face severe problems caused by the vastly different scales of the processes acting in and between the compartments of the terrestrial system, which also hinders comprehensive tests of their realism. We used the Terrestrial Systems Modeling Platform (TerrSysMP), which couples the meteorological Consortium for Small-scale Modeling (COSMO) model, the land-surface Community Land Model (CLM), and the subsurface ParFlow model, to generate a simulated catchment for a regional terrestrial system mimicking the Neckar catchment in southwest Germany, the virtual Neckar catchment. Simulations for this catchment are made for the period 2007–2015 and at a spatial resolution of 400 m for the land surface and subsurface and 1.1 km for the atmosphere. Among a discussion of modeling challenges, the model performance is evaluated based on observations covering several variables of the water cycle. We find that the simulated catchment behaves in many aspects quite close to observations of the real Neckar catchment, e.g., concerning atmospheric boundary-layer height, precipitation, and runoff. But also discrepancies become apparent, both in the ability of the model to correctly simulate some processes which still need improvement, such as overland flow, and in the realism of some observation operators like the satellite-based soil moisture sensors. The whole raw dataset is available for interested users. The dataset described here is available via the CERA database (Schalge et al., 2020): https://doi.org/10.26050/WDCC/Neckar_VCS_v1.

scholarly journals High-Resolution Virtual Catchment Simulations of the Subsurface-Land Surface-Atmosphere System

2016 ◽  
Author(s):  
Bernd Schalge ◽  
Jehan Rihani ◽  
Gabriele Baroni ◽  
Daniel Erdal ◽  
Gernot Geppert ◽  
...  
Keyword(s):  
Virtual Reality ◽  
Data Assimilation ◽  
Real World ◽  
Land Surface ◽  
Numerical Models ◽  
Surface Model ◽  
Data Scarcity ◽  
Terrestrial System ◽  
Surface Atmosphere ◽  
Atmosphere System

Abstract. Combining numerical models, which simulate water and energy fluxes in the subsurface-land surface-atmosphere system in a physically consistent way, becomes increasingly important to understand and study fluxes at compartmental boundaries and interdependencies of states across these boundaries. Complete state evolutions generated by such models, when run at highest possible resolutions while incorporating as many processes as attainable, may be regarded as a proxy of the real world – a virtual reality – which can be used to test hypotheses on functioning of the coupled terrestrial system and may serve as source for virtual measurements to develop data-assimilation methods. Such simulation systems, however, face severe problems caused by the vastly different scales of the processes acting in the compartments of the terrestrial system. The present study is motivated by the development of cross-compartmental data-assimilation methods, which face the difficulty of data scarcity in the subsurface when applied to real data. With appropriate and realistic measurement operators, the virtual reality not only allows taking virtual observations in any part of the terrestrial system at any density, thus overcoming data-scarcity problems of real-world applications, but also provides full information about true states and parameters aimed to be reconstructed from the measurements by data assimilation. In the present study, we have used the Terrestrial Systems Modeling Platform TerrSysMP, which couples the meteorological model COSMO, the land-surface model CLM, and the subsurface model ParFlow, to set up the virtual reality for a regional terrestrial system roughly oriented at the Neckar catchment in southwest Germany. We find that the virtual reality is in many aspects quite close to real observations of the catchment concerning, e.g., atmospheric boundary-layer height, precipitation, and runoff. But also discrepancies become apparent both in the ability of such models to correctly simulate some processes – which still need improvement – and the realism of the results of some observation operators like the SMOS and SMAP sensors, when faced with model states. In a succeeding step, we will use the virtual reality to generate observations in all compartments of the system for coupled data assimilation. The data assimilation will rely on a coarsened and simplified version of the model system.

How to validate calibrated/assimilated global hydrological outputs with high resolution groundwater data and regional models: an investigation of WaterGAP performance over France

2020 ◽  
Author(s):  
Kuei-Hua Hsu ◽  
Laurent Longuevergne ◽  
Annette Eicker
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Water Cycle ◽  
Land Surface Model ◽  
Remote Sensing Data ◽  
Surface Model ◽  
Calibration Data ◽  
Regional Models ◽  
Borehole Data ◽  
Combining Data

<p>The dynamic global water cycle is of ecological and societal importance as it affects the availability of freshwater resources and influences extreme events such as floods and droughts. This work is set in the frame of the GlobalCDA Research Unit. Its goal consists of developing a calibration/data assimilation approach (C/DA) to improve the tracking and predicting of freshwater availability by combining data from the global hydrological model WaterGAP with geodetic (GRACE, altimetry) and remote sensing data using an ensemble Kalman filter. The aim of this study is focused on the validation of C/DA results using independent datasets. We propose a double strategy: (1) we use regional models. We apply the high-resolution regional model AquiFR, a platform coupling the SURFEX land surface model with a set of hydrogeological models, providing storage changes in each individual compartments at daily time steps with a resolution of 8 km. (2) We built a large dataset of ~3000 monitoring boreholes in France. In order to compare the irregularly sampled borehole data with C/DA results, several interpolation methods are tested.</p>

scholarly journals A High-Resolution National-Scale Hydrologic Forecast System from a Global Ensemble Land Surface Model

2016 ◽  
Vol 52 (4) ◽  
pp. 950-964 ◽  
Author(s):  
Alan D. Snow ◽  
Scott D. Christensen ◽  
Nathan R. Swain ◽  
E. James Nelson ◽  
Daniel P. Ames ◽  
...  
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Land Surface Model ◽  
Surface Model ◽  
National Scale ◽  
Forecast System ◽  
Hydrologic Forecast

A novel application of an adaptive surrogate-based modeling optimization (ASMO) for the Community Territory System Model (CTSM) in Alaska

2021 ◽  
Author(s):  
Yifan Cheng ◽  
Andrew Newman ◽  
Sean Swenson ◽  
David Lawrence ◽  
Anthony Craig ◽  
...  
Keyword(s):  
High Resolution ◽  
River Basin ◽  
Land Surface ◽  
Computational Cost ◽  
Reanalysis Data ◽  
Freshwater Ecosystems ◽  
System Model ◽  
Surface Model ◽  
Yukon River ◽  
Yukon River Basin

<p>Climate-induced changes in snow cover, river flow, and freshwater ecosystems will greatly affect the indigenous groups in the Alaska and Yukon River Basin. To support policy-making on climate adaptation and mitigation for these underrepresented groups, an ongoing interdisciplinary effort is being made to combine Indigenous Knowledge with western science (https://www.colorado.edu/research/arctic-rivers/).</p><p>A foundational component of this project is a high fidelity representation of the aforementioned land surface processes. To this end, we aim to obtain a set of reliable high-resolution parameters for the Community Territory System Model (CTSM) for the continental scale domain of Alaska and the entire Yukon River Basin, which will be used in climate change simulations. CTSM is a complex, physically based state-of-the-science land surface model that includes complex vegetation and canopy representation, a multi-layer snow model, as well as hydrology and frozen soil physics necessary for the representation of streamflow and permafrost. Two modifications to the default CTSM configuration were made. First, we used CTSM that is implemented with hillslope hydrology to better capture the fine-scale hydrologic spatial heterogeneity in complex terrain. Second, we updated the input soil textures and organic carbon in CTSM using the high-resolution SoilGrid dataset.</p><p>In this study, we performed a multi-objective optimization on snow and streamflow metrics using an adaptive surrogate-based modeling optimization (ASMO). ASMO permits optimization of complex land-surface models over large domains through the use of surrogate models to minimize the computational cost of running the full model for every parameter combination. We ran CTSM at a spatial resolution of 1/24<sup>th</sup> degree and a temporal resolution of one hour using the ERA5 reanalysis data as the meteorological forcings. The ERA5 reanalysis data were bias-corrected to account for the orographic effects. We will discuss the ASMO-CTSM coupling workflow, performance characteristics of the optimization (e.g., computational cost, iterations), and comparisons of the default configuration and optimized model performance.</p>

scholarly journals Validation of a new SAFRAN-based gridded precipitation product for Spain and comparisons to Spain02 and ERA-Interim

2017 ◽  
Vol 21 (4) ◽  
pp. 2187-2201 ◽  
Author(s):  
Pere Quintana-Seguí ◽  
Marco Turco ◽  
Sixto Herrera ◽  
Gonzalo Miguez-Macho
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Climate Models ◽  
Hydrological Cycle ◽  
Interpolation Method ◽  
Rain Gauge ◽  
Surface Model ◽  
Low Resolution ◽  
Precipitation Events

Abstract. Offline land surface model (LSM) simulations are useful for studying the continental hydrological cycle. Because of the nonlinearities in the models, the results are very sensitive to the quality of the meteorological forcing; thus, high-quality gridded datasets of screen-level meteorological variables are needed. Precipitation datasets are particularly difficult to produce due to the inherent spatial and temporal heterogeneity of that variable. They do, however, have a large impact on the simulations, and it is thus necessary to carefully evaluate their quality in great detail. This paper reports the quality of two high-resolution precipitation datasets for Spain at the daily time scale: the new SAFRAN-based dataset and Spain02. SAFRAN is a meteorological analysis system that was designed to force LSMs and has recently been extended to the entirety of Spain for a long period of time (1979/1980–2013/2014). Spain02 is a daily precipitation dataset for Spain and was created mainly to validate regional climate models. In addition, ERA-Interim is included in the comparison to show the differences between local high-resolution and global low-resolution products. The study compares the different precipitation analyses with rain gauge data and assesses their temporal and spatial similarities to the observations. The validation of SAFRAN with independent data shows that this is a robust product. SAFRAN and Spain02 have very similar scores, although the latter slightly surpasses the former. The scores are robust with altitude and throughout the year, save perhaps in summer when a diminished skill is observed. As expected, SAFRAN and Spain02 perform better than ERA-Interim, which has difficulty capturing the effects of the relief on precipitation due to its low resolution. However, ERA-Interim reproduces spells remarkably well in contrast to the low skill shown by the high-resolution products. The high-resolution gridded products overestimate the number of precipitation days, which is a problem that affects SAFRAN more than Spain02 and is likely caused by the interpolation method. Both SAFRAN and Spain02 underestimate high precipitation events, but SAFRAN does so more than Spain02. The overestimation of low precipitation events and the underestimation of intense episodes will probably have hydrological consequences once the data are used to force a land surface or hydrological model.

scholarly journals Diagnosing hydrological limitations of a land surface model: application of JULES to a deep-groundwater chalk basin

2016 ◽  
Vol 20 (1) ◽  
pp. 143-159 ◽  
Author(s):  
N. Le Vine ◽  
A. Butler ◽  
N. McIntyre ◽  
C. Jackson
Keyword(s):  
Land Surface ◽  
Expert Knowledge ◽  
Water Cycle ◽  
Land Surface Model ◽  
Surface Model ◽  
Deep Groundwater ◽  
Resolution Model ◽  
Terrestrial Water ◽  
Water Redistribution ◽  
Types Of Information

Abstract. Land surface models (LSMs) are prospective starting points to develop a global hyper-resolution model of the terrestrial water, energy, and biogeochemical cycles. However, there are some fundamental limitations of LSMs related to how meaningfully hydrological fluxes and stores are represented. A diagnostic approach to model evaluation and improvement is taken here that exploits hydrological expert knowledge to detect LSM inadequacies through consideration of the major behavioural functions of a hydrological system: overall water balance, vertical water redistribution in the unsaturated zone, temporal water redistribution, and spatial water redistribution over the catchment's groundwater and surface-water systems. Three types of information are utilized to improve the model's hydrology: (a) observations, (b) information about expected response from regionalized data, and (c) information from an independent physics-based model. The study considers the JULES (Joint UK Land Environmental Simulator) LSM applied to a deep-groundwater chalk catchment in the UK. The diagnosed hydrological limitations and the proposed ways to address them are indicative of the challenges faced while transitioning to a global high resolution model of the water cycle.

scholarly journals Benchmarking and Process Diagnostics of Land Models

2018 ◽  
Vol 19 (11) ◽  
pp. 1835-1852 ◽  
Author(s):  
Grey S. Nearing ◽  
Benjamin L. Ruddell ◽  
Martyn P. Clark ◽  
Bart Nijssen ◽  
Christa Peters-Lidard
Keyword(s):  
Land Surface ◽  
Model Performance ◽  
Land Surface Model ◽  
Surface Model ◽  
Process Diagnostics ◽  
Surface Energy Fluxes ◽  
Structural Error ◽  
Intercomparison Project ◽  
Parameter Values ◽  
Process Level

Abstract We propose a conceptual and theoretical foundation for information-based model benchmarking and process diagnostics that provides diagnostic insight into model performance and model realism. We benchmark against a bounded estimate of the information contained in model inputs to obtain a bounded estimate of information lost due to model error, and we perform process-level diagnostics by taking differences between modeled versus observed transfer entropy networks. We use this methodology to reanalyze the recent Protocol for the Analysis of Land Surface Models (PALS) Land Surface Model Benchmarking Evaluation Project (PLUMBER) land model intercomparison project that includes the following models: CABLE, CH-TESSEL, COLA-SSiB, ISBA-SURFEX, JULES, Mosaic, Noah, and ORCHIDEE. We report that these models (i) use only roughly half of the information available from meteorological inputs about observed surface energy fluxes, (ii) do not use all information from meteorological inputs about long-term Budyko-type water balances, (iii) do not capture spatial heterogeneities in surface processes, and (iv) all suffer from similar patterns of process-level structural error. Because the PLUMBER intercomparison project did not report model parameter values, it is impossible to know whether process-level error patterns are due to model structural error or parameter error, although our proposed information-theoretic methodology could distinguish between these two issues if parameter values were reported. We conclude that there is room for significant improvement to the current generation of land models and their parameters. We also suggest two simple guidelines to make future community-wide model evaluation and intercomparison experiments more informative.

scholarly journals Continuous high-resolution midlatitude-belt simulations for July–August 2013 with WRF

2017 ◽  
Vol 10 (5) ◽  
pp. 2031-2055 ◽  
Author(s):  
Thomas Schwitalla ◽  
Hans-Stefan Bauer ◽  
Volker Wulfmeyer ◽  
Kirsten Warrach-Sagi
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Large Scale ◽  
Temperature Fields ◽  
Surface Model ◽  
Limited Area ◽  
Data Set ◽  
Latitude Belt ◽  
Simulated Precipitation ◽  
The Impact

Abstract. Increasing computational resources and the demands of impact modelers, stake holders, and society envision seasonal and climate simulations with the convection-permitting resolution. So far such a resolution is only achieved with a limited-area model whose results are impacted by zonal and meridional boundaries. Here, we present the setup of a latitude-belt domain that reduces disturbances originating from the western and eastern boundaries and therefore allows for studying the impact of model resolution and physical parameterization. The Weather Research and Forecasting (WRF) model coupled to the NOAH land–surface model was operated during July and August 2013 at two different horizontal resolutions, namely 0.03 (HIRES) and 0.12° (LOWRES). Both simulations were forced by the European Centre for Medium-Range Weather Forecasts (ECMWF) operational analysis data at the northern and southern domain boundaries, and the high-resolution Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) data at the sea surface.The simulations are compared to the operational ECMWF analysis for the representation of large-scale features. To analyze the simulated precipitation, the operational ECMWF forecast, the CPC MORPHing (CMORPH), and the ENSEMBLES gridded observation precipitation data set (E-OBS) were used as references.Analyzing pressure, geopotential height, wind, and temperature fields as well as precipitation revealed (1) a benefit from the higher resolution concerning the reduction of monthly biases, root mean square error, and an improved Pearson skill score, and (2) deficiencies in the physical parameterizations leading to notable biases in distinct regions like the polar Atlantic for the LOWRES simulation, the North Pacific, and Inner Mongolia for both resolutions.In summary, the application of a latitude belt on a convection-permitting resolution shows promising results that are beneficial for future seasonal forecasting.

scholarly journals Development and application of the WRFPLUS-Chem online chemistry adjoint and WRFDA-Chem assimilation system

2015 ◽  
Vol 8 (6) ◽  
pp. 1857-1876 ◽  
Author(s):  
J. J. Guerrette ◽  
D. K. Henze
Keyword(s):  
Land Surface ◽  
Vertical Mixing ◽  
Model Performance ◽  
Land Surface Model ◽  
Sensitivity Study ◽  
Climate Impacts ◽  
Surface Model ◽  
Time Period ◽  
Develop Land ◽  
The Impact

Abstract. Here we present the online meteorology and chemistry adjoint and tangent linear model, WRFPLUS-Chem (Weather Research and Forecasting plus chemistry), which incorporates modules to treat boundary layer mixing, emission, aging, dry deposition, and advection of black carbon aerosol. We also develop land surface and surface layer adjoints to account for coupling between radiation and vertical mixing. Model performance is verified against finite difference derivative approximations. A second-order checkpointing scheme is created to reduce computational costs and enable simulations longer than 6 h. The adjoint is coupled to WRFDA-Chem, in order to conduct a sensitivity study of anthropogenic and biomass burning sources throughout California during the 2008 Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) field campaign. A cost-function weighting scheme was devised to reduce the impact of statistically insignificant residual errors in future inverse modeling studies. Results of the sensitivity study show that, for this domain and time period, anthropogenic emissions are overpredicted, while wildfire emission error signs vary spatially. We consider the diurnal variation in emission sensitivities to determine at what time sources should be scaled up or down. Also, adjoint sensitivities for two choices of land surface model (LSM) indicate that emission inversion results would be sensitive to forward model configuration. The tools described here are the first step in conducting four-dimensional variational data assimilation in a coupled meteorology–chemistry model, which will potentially provide new constraints on aerosol precursor emissions and their distributions. Such analyses will be invaluable to assessments of particulate matter health and climate impacts.

Sign in / Sign up

Export Citation Format

Share Document