Generation of a high-resolution snow cover dataset from Sentinel-2 images for snow model calibration 

2021 ◽  
Author(s):  
Florentin Hofmeister ◽  
Leonardo F. Arias-Rodriguez ◽  
Marco Borga ◽  
Valentina Premier ◽  
Carlo Marin ◽  
...  
Keyword(s):  
Snow Cover ◽  
Snow Depth ◽  
Model Calibration ◽  
Data Availability ◽  
Cloud Detection ◽  
Snow Storage ◽  
Elevation Zone ◽  
Snow Model ◽  
Sentinel 2

<p>Modeling the runoff generation of high elevation Alpine catchments requires fundamental knowledge of the snow storage and the spatial distribution of snow cover. Since in-situ snow observations are often very scarce and represent only a point information, spatial snow information from satellite data is used since decades. However, the accuracy of snow cover maps through remote sensing products depends strongly on the cloudiness. In order to generate a spatial and temporal highly resolved dataset of snow cover maps, we applied the pixel identification processor (IdePix available in SNAP v7.0) to retrieve diverse cloud layers from Sentinel-2 Level-1C products. This makes it possible to use also high-clouded images for the snow detection, which increases significantly the data availability for the later performed snow model calibration. Cloudy areas, for which snow detection by the NDSI calculation is not possible, are set to no data. Sentinel-2 images that do not have cloud information require an extra correction based on the assumption that the snow cover has a pronounced elevation gradient. The entire NDSI dataset is subdivided into 200 m elevation zones and statistically analyzed. Thereby, the cloud-influenced images clearly stand out as outliers in the elevation zones >3000 m. If an elevation zone is detected as an outlier, the corresponding elevation zone is set to no data as well. After the comprehensive cloud detection, a pixel wise comparison with in-situ snow depth observation of four different sites allows us a first validation of the snow detection quality. In a second step, the generated snow maps are compared with the snow and cloud detection algorithm developed by Eurac Research. The final snow cover maps are used together with the in-situ snow depth observations to calibrate two different snowmelt approaches of the hydrological model WaSiM - the T-index and the energy balance-based approach (including gravitational snow redistribution) - over a mountainous basin in the Eastern Italian Alps.</p>

scholarly journals Assimilation of snow cover and snow depth into a snow model to estimate snow water equivalent and snowmelt runoff in a Himalayan catchment

2017 ◽  
Vol 11 (4) ◽  
pp. 1647-1664 ◽  
Author(s):  
Emmy E. Stigter ◽  
Niko Wanders ◽  
Tuomo M. Saloranta ◽  
Joseph M. Shea ◽  
Marc F. P. Bierkens ◽  
...  
Keyword(s):  
Kalman Filter ◽  
Data Assimilation ◽  
Snow Cover ◽  
Climate Sensitivity ◽  
Snow Depth ◽  
Snow Water Equivalent ◽  
Snowmelt Runoff ◽  
Snow Water ◽  
Snow Model

Abstract. Snow is an important component of water storage in the Himalayas. Previous snowmelt studies in the Himalayas have predominantly relied on remotely sensed snow cover. However, snow cover data provide no direct information on the actual amount of water stored in a snowpack, i.e., the snow water equivalent (SWE). Therefore, in this study remotely sensed snow cover was combined with in situ observations and a modified version of the seNorge snow model to estimate (climate sensitivity of) SWE and snowmelt runoff in the Langtang catchment in Nepal. Snow cover data from Landsat 8 and the MOD10A2 snow cover product were validated with in situ snow cover observations provided by surface temperature and snow depth measurements resulting in classification accuracies of 85.7 and 83.1 % respectively. Optimal model parameter values were obtained through data assimilation of MOD10A2 snow maps and snow depth measurements using an ensemble Kalman filter (EnKF). Independent validations of simulated snow depth and snow cover with observations show improvement after data assimilation compared to simulations without data assimilation. The approach of modeling snow depth in a Kalman filter framework allows for data-constrained estimation of snow depth rather than snow cover alone, and this has great potential for future studies in complex terrain, especially in the Himalayas. Climate sensitivity tests with the optimized snow model revealed that snowmelt runoff increases in winter and the early melt season (December to May) and decreases during the late melt season (June to September) as a result of the earlier onset of snowmelt due to increasing temperature. At high elevation a decrease in SWE due to higher air temperature is (partly) compensated by an increase in precipitation, which emphasizes the need for accurate predictions on the changes in the spatial distribution of precipitation along with changes in temperature.

scholarly journals Climate sensitivity of snow water equivalent and snowmelt runoff in a Himalayan catchment

2016 ◽  
Author(s):  
Emmy E. Stigter ◽  
Niko Wanders ◽  
Tuomo M. Saloranta ◽  
Joseph M. Shea ◽  
Marc F.P. Bierkens ◽  
...  
Keyword(s):  
Kalman Filter ◽  
Snow Cover ◽  
Climate Sensitivity ◽  
Snow Depth ◽  
Snow Water Equivalent ◽  
Snowmelt Runoff ◽  
Snow Water ◽  
Snow Model ◽  
Increasing Temperature

Abstract. Snow is an important component of water storage in the Himalayas. Previous snowmelt studies in the Himalayas have predominantly relied on remotely sensed snow cover. However this provides no information on the actual amount of water stored in a snowpack i.e. the snow water equivalent (SWE). Therefore, in this study remotely sensed snow cover was combined with in situ meteorological observations and a modified version of the seNorge snow model to estimate climate sensitivity of SWE and snowmelt runoff in the Langtang catchment in Nepal. Landsat 8 and MOD10A2 snow cover maps were validated with in situ snow cover observations provided by surface temperature and snow depth measurements resulting in classification accuracies of 85.7 % and 83.1 % respectively. Optimal model parameter values were obtained through data assimilation of MOD10A2 snow maps and snow depth measurements using an Ensemble Kalman filter. The approach of modelling snow depth in a Kalman filter framework allows for data-constrained estimation of SWE rather than snow cover alone and this has great potential for future studies in the Himalayas. Climate sensitivity tests with the optimized snow model show a strong decrease in SWE in the valley with increasing temperature. However, at high elevation a decrease in SWE is (partly) compensated by an increase in precipitation, which emphasizes the need for accurate predictions on the changes in the spatial distribution of precipitation along with changes in temperature. Finally the climate sensitivity study revealed that snowmelt runoff increases in winter and early melt season (December to May) and decreases during the late melt season (June to September) as a result of the earlier onset of snowmelt due to increasing temperature.

scholarly journals Theia Snow collection: high resolution operational snow cover maps from Sentinel-2 and Landsat-8 data

2018 ◽  
Author(s):  
Simon Gascoin ◽  
Manuel Grizonnet ◽  
Marine Bouchet ◽  
Germain Salgues ◽  
Olivier Hagolle
Keyword(s):  
High Resolution ◽  
Snow Cover ◽  
Snow Depth ◽  
Western Europe ◽  
Landsat 8 ◽  
Mountain Regions ◽  
Snow Cover Area ◽  
Level 2 ◽  
Sentinel 2

Abstract. The Theia Snow collection routinely provides high resolution maps of the snow cover area from Sentinel-2 and Landsat-8 observations. The collection covers selected areas worldwide including the main mountain regions in Western Europe (e.g. Alps, Pyrenees) and the High Atlas in Morocco. Each product of the Snow collection contains four classes: snow, no-snow, cloud and no-data. We present the algorithm to generate the snow products and provide an evaluation of their accuracy using in situ snow depth measurements, higher resolution snow maps, and visual control. The results suggest that the snow is accurately detected in the Theia snow collection, and that the snow detection is more accurate than the sen2cor outputs (ESA level 2 product). An issue that should be addressed in a future release is the occurrence of false snow detection in some large clouds. The snow maps are currently produced and freely distributed in average 5 days after the image acquisition as raster and vector files via the Theia portal (http://doi.org/10.24400/329360/F7Q52MNK).

scholarly journals Icelandic snow cover characteristics derived from a gap-filled MODIS daily snow cover product

2019 ◽  
Vol 23 (7) ◽  
pp. 3021-3036
Author(s):  
Andri Gunnarsson ◽  
Sigurður M. Garðarsson ◽  
Óli G. B. Sveinsson
Keyword(s):  
Snow Cover ◽  
Cloud Cover ◽  
Data Availability ◽  
Statistical Testing ◽  
Optical Data ◽  
Temporal Aggregation ◽  
Landsat 7 ◽  
Snow Cover Duration ◽  
Sentinel 2

Abstract. This study presents a spatio-temporal continuous data set for snow cover in Iceland based on the Moderate Resolution Imaging Spectroradiometer (MODIS) from 2000 to 2018. Cloud cover and polar darkness are the main limiting factors for data availability of remotely sensed optical data at higher latitudes. In Iceland the average cloud cover is 75 % with some spatial variations, and polar darkness reduces data availability from the MODIS sensor from late November until mid January. In this study MODIS snow cover data were validated over Iceland with comparison to manned in situ observations and Landsat 7/8 and Sentinel 2 data. Overall a good agreement was found between in situ observed snow cover, with an average agreement of 0.925. Agreement of Landsat 7/8 and Sentinel 2 was found to be acceptable, with R2 values 0.96, 0.92 and 0.95, respectively, and in agreement with other studies. By applying daily data merging from Terra and Aqua and a temporal aggregation of 7 d, unclassified pixels were reduced from 75 % to 14 %. The remaining unclassified pixels after daily merging and temporal aggregation were removed with classification learners trained with classified data, pixel location, aspect and elevation. Various snow cover characteristic metrics were derived for each pixel such as snow cover duration, first and last snow-free dates, deviation and dynamics of snow cover and trends during the study period. On average the first snow-free date in Iceland is 27 June, with a standard deviation of 19.9 d. For the study period a trend of increasing snow cover duration was observed for all months except October and November. However, statistical testing of the trends indicated that there was only a significant trend in June.

scholarly journals Icelandic Snow Cover Characteristics derived from a gap-filled MODIS Daily Snow Cover Product

2019 ◽  
Author(s):  
Andri Gunnarsson ◽  
Sigurður M. Garðarsson ◽  
Óli G. B. Sveinsson
Keyword(s):  
Snow Cover ◽  
Cloud Cover ◽  
Data Availability ◽  
Statistical Testing ◽  
Optical Data ◽  
Temporal Aggregation ◽  
Data Set ◽  
Snow Cover Duration ◽  
Sentinel 2

Abstract. This study presents a spatio-temporal continuous data set for snow cover in Iceland based on the Moderate Resolution Imaging Spectroradiometer (Modis) from 2000–2018. Cloud cover and polar darkness are the main limiting factors for data availability of remotely sensed optical data at higher latitudes. In Iceland the average cloud cover is 75 % with some spatial variations and polar darkness reduces data availability from the Modis sensor from late November until mid January. In this study Modis snow cover data were validated over Iceland with comparison to manned in-situ observations, Landsat 7/8 and Sentinel 2 data. Overall a good agreement was found between in-situ observed snow cover with an average agreement of 0.925. Agreement of Landsat 7,8 and Sentinel 2 was found to be acceptable with R2 values 0.96, 0.92 and 0.95, respectively, and in agreement with other studies. By applying daily data merging from Terra and Aqua and temporal aggregation of 7 days, unclassified pixels were reduced from 75 % to 14 %. The remaining unclassified pixels after daily merging and temporal aggregation were removed with classification learners trained with classified data, pixel location, aspect and elevation. Various snow cover characteristic metrics were derived for each pixel such as snow cover duration, first and last snow free date, deviation and dynamics of snow cover and trends during the study period. On average the first snow free date in Iceland is June 27 with a standard deviation of 19.9 days. For the study period a trend of increasing snow cover duration was observed for all months except October and November. However, statistical testing of the trends indicated that there was only a significant trend in June.

scholarly journals Validation of MODIS snow cover images over Austria

2006 ◽  
Vol 3 (4) ◽  
pp. 1569-1601 ◽  
Author(s):  
J. Parajka ◽  
G. Blöschl
Keyword(s):  
Snow Cover ◽  
Classification Accuracy ◽  
Snow Depth ◽  
Seasonal Pattern ◽  
Acquisition Time ◽  
Spatial And Temporal Variability ◽  
Temporal Shift ◽  
Early Afternoon ◽  
Moderate Resolution Imaging Spectroradiometer

Abstract. This study evaluates the Moderate Resolution Imaging Spectroradiometer (MODIS) snow cover product over the territory of Austria. The aims are (a) to analyse the spatial and temporal variability of the MODIS snow product classes, (b) to examine the accuracy of the MODIS snow product against in situ snow depth data, and (c) to identify the main factors that may influence the MODIS classification accuracy. We use daily MODIS grid maps (version 4) and daily snow depth measurements at 754 climate stations in the period from February 2000 to December 2005. The results indicate that, on average, clouds obscured 63% of Austria, which may significantly restrict the applicability of the MODIS snow cover images to hydrological modelling. On cloud-free days, however, the classification accuracy is very good with an average of 95%. There is no consistent relationship between the classification errors and dominant land cover type and local topographical variability but there are clear seasonal patterns to the errors. In December and January the errors are around 15% while in summer they are less than 1%. This seasonal pattern is related to the overall percentage of snow cover in Austria, although in spring, when there is a well developed snow pack, errors tend to be smaller than they are in early winter for the same overall percent snow cover. Overestimation and underestimation errors balance during most of the year which indicates little bias. In November and December, however, there appears to exist a tendency for overestimation. Part of the errors may be related to the temporal shift between the in situ snow depth measurements (07:00 a.m.) and the MODIS acquisition time (early afternoon).

scholarly journals A new Snow-SVAT to simulate the accumulation and ablation of seasonal snow cover beneath a forest canopy

2004 ◽  
Vol 50 (169) ◽  
pp. 171-182 ◽  
Author(s):  
Melody J. Tribbeck ◽  
Robert J. Gurney ◽  
Elizabeth M. Morris ◽  
David W. C. Pearson
Keyword(s):  
Solar Radiation ◽  
Snow Cover ◽  
Forest Canopy ◽  
Correlation Coefficients ◽  
Field Measurements ◽  
Radiation Model ◽  
Physically Based ◽  
Boreal Ecosystem ◽  
Snow Model

AbstractA new snow—soil—vegetation—atmosphere transfer (Snow-SVAT) scheme, which simulates the accumulation and ablation of the snow cover beneath a forest canopy, is presented. The model was formulated by coupling a canopy optical and thermal radiation model to a physically based multi-layer snow model. This canopy radiation model is physically based yet requires few parameters, so can be used when extensive in situ field measurements are not available. Other forest effects such as the reduction of wind speed, interception of snow on the canopy and the deposition of litter were incorporated within this combined model, SNOWCAN, which was tested with data taken as part of the Boreal Ecosystem—Atmosphere Study (BOREAS) international collaborative experiment. Snow depths beneath four different canopy types and at an open site were simulated. Agreement between observed and simulated snow depths was generally good, with correlation coefficients ranging between r2 = 0.94 and r2 = 0.98 for all sites where automatic measurements were available. However, the simulated date of total snowpack ablation generally occurred later than the observed date. A comparison between simulated solar radiation and limited measurements of sub-canopy radiation at one site indicates that the model simulates the sub-canopy downwelling solar radiation early in the season to within measurement uncertainty.

scholarly journals Subgrid parameterization of snow distribution at a Mediterranean site using terrestrial photography

2016 ◽  
Author(s):  
Rafael Pimentel ◽  
Javier Herrero ◽  
María José Polo
Keyword(s):  
Snow Cover ◽  
Snow Depth ◽  
Scale Effects ◽  
Control Area ◽  
Sigmoid Function ◽  
Snow Cover Fraction ◽  
Snow Distribution ◽  
Snow Model ◽  
Snow Conditions ◽  
High Level

Abstract. Subgrid variability introduces non-negligible scale effects on the GIS-based representation of snow. This heterogeneity is even more evident in semiarid regions, where the high variability of the climate produces various accumulation melting cycles throughout the year and a large spatial heterogeneity of the snow cover. This variability in a watershed can often be represented by snow depletion curves (DCs). In this study, terrestrial photography (TP) of a cell-sized area (30 x 30 m) was used to define local snow DCs at a Mediterranean site. Snow cover fraction (SCF) and snow depth (h) values obtained with this technique constituted the two datasets used to define DCs. A flexible sigmoid function was selected to parameterize snow behaviour on this subgrid scale. It was then fitted to meet five different snow patterns in the control area: one for the accumulation phase and four for the melting phase in a cycle within the snow season. Each pattern was successfully associated with the snow conditions and previous evolution. The resulting DCs were able to capture certain physical features of the snow, which were used in a decision-tree and included in the point snow model formulated by Herrero et al. (2009). The final performance of this model was tested against field observations recorded over four hydrological years (2009–2013). The calibration and validation of this DC-snow model was found to have a high level of accuracy with global RMSE values of 84.2 mm for the average snow depth and 0.18 m2 m-2 for the snow cover fraction in the control area. The use of DCs on the cell scale proposed in this research provided a sound basis for the extension of point snow models to larger areas by means of a gridded distributed calculation.

scholarly journals Changes in Snow Storage in the Upper Hron River Basin (Slovakia)

2014 ◽  
Vol 10 (2) ◽  
pp. 145-160
Author(s):  
Katarína Kotríková ◽  
Kamila Hlavčová ◽  
Róbert Fencík
Keyword(s):  
Snow Cover ◽  
Snow Depth ◽  
Satellite Images ◽  
Snow Water Equivalent ◽  
Winter Season ◽  
Kendall Test ◽  
Measured Data ◽  
Time Step ◽  
Snow Storage ◽  
Snow Water

Abstract An evaluation of changes in the snow cover in mountainous basins in Slovakia and a validation of MODIS satellite images are provided in this paper. An analysis of the changes in snow cover was given by evaluating changes in the snow depth, the duration of the snow cover, and the simulated snow water equivalent in a daily time step using a conceptual hydrological rainfall-runoff model with lumped parameters. These values were compared with the available measured data at climate stations. The changes in the snow cover and the simulated snow water equivalent were estimated by trend analysis; its significance was tested using the Mann-Kendall test. Also, the satellite images were compared with the available measured data. From the results, it is possible to see a decrease in the snow depth and the snow water equivalent from 1961-2010 in all the months of the winter season, and significant decreasing trends were indicated in the months of December, January and February

Sign in / Sign up

Export Citation Format

Share Document