The anatomy of a fractured reef from Cyprus: a possible analogue for the Eastern Mediterranean carbonate reservoirs

Author(s):  
Stefano Patruno ◽  
Ian Abdallah ◽  
Vittorio Scisciani ◽  
Ernestos Sarris ◽  
Fabio Colantonio

<p>The core of the island of Cyprus hosts the inverted Troodos ophiolitic zone, whose flanks are overlain by autochthonous sedimentary rocks, mostly comprising Cenozoic-age carbonate shelf units. Some of these units are likely analogous to the Miocene part of the Levantine Basin “Zohr-like” carbonate buildup reservoirs, which are playing a dominant role in the present-day gas prospectivity and long-term potential for CO<sub>2</sub> carbon capture and storage in the Eastern Mediterranean.</p><p>The study location hosts a steep sided carbonate hill (c. 90 m elevation and about 0.35 km<sup>2</sup> total area. This hill corresponds to a lower Miocene shallow-water Terra Member carbonate buildup (Pakhna Formation), inclusive of a well-developed reefal biohermal fossil community at the summit. The buildup can be subdivided into four main depositional sub-units (informally called ‘beds’). Each of these approximately horizonal “beds” is about 5-20 m thick and hosts a number of near-vertical open fracture and minor fault sets, further enlarged by meteoric diagenesis. The lack of vegetation makes this a world-class example of shallow-water buildup available for geological analyses.</p><p>In this work, we have focused on the reservoir-scale physical properties and stratigraphic architecture of the reef outcrop, and in particular on the impact that the fracture and karst networks can be expected to play on the porosity and permeability properties of these rocks. We have utilized 133 drone photographs, subsequently “patched” together in a 3D Digital Terrain Model (DTM) using CMD-MVS; this software takes a series of pictures and creates a 3D point cloud from them thereby solving the problem of structure from motion (SFM). Several photographs have been additionally georeferenced and the visible fracture networks mapped in GIS. Furthermore, fieldwork analyses have been carried out and the following fracture properties measured at several representative locations utilizing linear scanline sampling and circular scanline methods: fracture orientation, aperture, spacing, length, intensity. Finally, representative samples have been collected from the field in order to measure their porosity and permeability properties.</p><p>Our analysis suggests the presence of a dominant fracture and fault set, striking approximately NE-SW to ESE-WNW. Additional relatively randomly-oriented, minor fracture sets are also present. Fracture intensity from the linear scanline method varies from 3 fractures per meter to the north-east to 6 fractures per meter to the south-west. The fracture aperture ranges from 0.01 to 1 meter. The studied shallow-water carbonate is characterized by high permeability and moderate porosity, with likely anisotropic flow properties along the main fracture sets. The presence of fractures enlarged by subaerial dissolutions is likely the key property controlling the reservoir parameters of these rocks, although further analyses are needed to find out whether such dissolution is associated with the present-day outcrop exposure to meteoric leaching, or was developed earlier on and can be reasonably expected in the subsurface.</p>

2019 ◽  
Vol 6 (6) ◽  
pp. 181902 ◽  
Author(s):  
Junchen Lv ◽  
Yuan Chi ◽  
Changzhong Zhao ◽  
Yi Zhang ◽  
Hailin Mu

Reliable measurement of the CO 2 diffusion coefficient in consolidated oil-saturated porous media is critical for the design and performance of CO 2 -enhanced oil recovery (EOR) and carbon capture and storage (CCS) projects. A thorough experimental investigation of the supercritical CO 2 diffusion in n -decane-saturated Berea cores with permeabilities of 50 and 100 mD was conducted in this study at elevated pressure (10–25 MPa) and temperature (333.15–373.15 K), which simulated actual reservoir conditions. The supercritical CO 2 diffusion coefficients in the Berea cores were calculated by a model appropriate for diffusion in porous media based on Fick's Law. The results show that the supercritical CO 2 diffusion coefficient increases as the pressure, temperature and permeability increase. The supercritical CO 2 diffusion coefficient first increases slowly at 10 MPa and then grows significantly with increasing pressure. The impact of the pressure decreases at elevated temperature. The effect of permeability remains steady despite the temperature change during the experiments. The effect of gas state and porous media on the supercritical CO 2 diffusion coefficient was further discussed by comparing the results of this study with previous study. Based on the experimental results, an empirical correlation for supercritical CO 2 diffusion coefficient in n -decane-saturated porous media was developed. The experimental results contribute to the study of supercritical CO 2 diffusion in compact porous media.


2020 ◽  
Vol 11 (02) ◽  
pp. 2050010
Author(s):  
MINHO BAEK ◽  
QIMIN CHAI ◽  
SUDUK KIM

This paper explores the impact of international emissions trading (IET) among Korea, China, and Japan, three countries that would form the largest potential carbon market in the world. The Nationally Determined Contribution for each country forms the basis of scenario analyses using GCAM (Global Change Assessment Model). As expected, China emerges as the sole net seller of emissions permits while Korea and Japan are the net purchasers of emission permits produced by China. All participants enjoy gains from emissions trading. The implementation of IET changes the power systems of Korea and Japan by favoring increased conventional fossil fuel usage over renewable power technologies or attached carbon capture and storage (CCS) technologies, while China’s power system moves in the opposite direction, by boosting the deployment of renewables and CCS-attached technologies. Considering the counterproductive incentives for Korea and Japan to consume more carbon-intensive energy sources, each country should consider such issues carefully before officially adopting IET as the pillar of climate policy.


2021 ◽  
pp. 0734242X2110481
Author(s):  
V. Bisinella ◽  
J. Nedenskov ◽  
Christian Riber ◽  
Tore Hulgaard ◽  
Thomas H. Christensen

Amending municipal solid waste incineration with carbon capture and storage (CCS) is a new approach that can reduce the climate change impacts of waste incineration. This study provides a detailed analysis of the consequences of amending the new Amager Bakke incinerator in Copenhagen (capacity: 600,000 tonnes waste per year) with CCS as a post-combustion technology. Emphasis is on the changes in the energy flows and outputs as well as the environmental performance of the plant; the latter is assessed by life cycle assessment. Amending Amager Bakke with CCS of the chosen configuration reduces the electricity output by 50% due to steam use by the capture unit, but introducing post-capture flue gas condensation increases the heat output utilized in the Copenhagen district heating system by 20%. Thus, the overall net energy efficiency is not affected. The CCS amendment reduces the fossil CO2 emissions to 40 kg CO2 per tonne of incinerated waste and stores 530 kg biogenic CO2 per tonne of incinerated waste. Potential developments in the composition of the residual waste incinerated or in the energy systems that Amager Bakke interacts with, do not question the benefits of the CCS amendment. In terms of climate change impacts, considering different waste composition and energy system scenarios, introducing CCS reduces in average the impact of Amager Bakke by 850 kg CO2-equivalents per tonne of incinerated waste. CCS increases the environmental impacts in other categories, but not in the same order of magnitude as the savings introduced within climate change.


Geosciences ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 446
Author(s):  
Dinfa Vincent Barshep ◽  
Richard Henry Worden

The Upper Jurassic, shallow marine Corallian sandstones of the Weald Basin, UK, are significant onshore reservoirs due to their future potential for carbon capture and storage (CCS) and hydrogen storage. These reservoir rocks, buried to no deeper than 1700 m before uplift to 850 to 900 m at the present time, also provide an opportunity to study the pivotal role of shallow marine sandstone eodiagenesis. With little evidence of compaction, these rocks show low to moderate porosity for their relatively shallow burial depths. Their porosity ranges from 0.8 to 30% with an average of 12.6% and permeability range from 0.01 to 887 mD with an average of 31 mD. The Corallian sandstones of the Weald Basin are relatively poorly studied; consequently, there is a paucity of data on their reservoir quality which limits any ability to predict porosity and permeability away from wells. This study presents a potential first in the examination of diagenetic controls of reservoir quality of the Corallian sandstones, of the Weald Basin’s Palmers Wood and Bletchingley oil fields, using a combination of core analysis, sedimentary core logs, petrography, wireline analysis, SEM-EDS analysis and geochemical analysis to understand the extent of diagenetic evolution of the sandstones and its effects on reservoir quality. The analyses show a dominant quartz arenite lithology with minor feldspars, bioclasts, Fe-ooids and extra-basinal lithic grains. We conclude that little compactional porosity-loss occurred with cementation being the main process that caused porosity-loss. Early calcite cement, from neomorphism of contemporaneously deposited bioclasts, represents the majority of the early cement, which subsequently prevented mechanical compaction. Calcite cement is also interpreted to have formed during burial from decarboxylation-derived CO2 during source rock maturation. Other cements include the Fe-clay berthierine, apatite, pyrite, dolomite, siderite, quartz, illite and kaolinite. Reservoir quality in the Corallian sandstones show no significant depositional textural controls; it was reduced by dominant calcite cementation, locally preserved by berthierine grain coats that inhibited quartz cement and enhanced by detrital grain dissolution as well as cement dissolution. Reservoir quality in the Corallian sandstones can therefore be predicted by considering abundance of calcite cement from bioclasts, organically derived CO2 and Fe-clay coats.


Author(s):  
Ralph F. Keeling ◽  
Andrew C. Manning ◽  
Manvendra K. Dubey

Compared with other industrial processes, carbon capture and storage (CCS) will have an unusual impact on atmospheric composition by reducing the CO 2 released from fossil-fuel combustion plants, but not reducing the associated O 2 loss. CO 2 that leaks into the air from below-ground CCS sites will also be unusual in lacking the O 2 deficit normally associated with typical land CO 2 sources, such as from combustion or ecosystem exchanges. CCS may also produce distinct isotopic changes in atmospheric CO 2 . Using simple models and calculations, we estimate the impact of CCS or leakage on regional atmospheric composition. We also estimate the possible impact on global atmospheric composition, assuming that the technology is widely adopted. Because of its unique signature, CCS may be especially amenable to monitoring, both regionally and globally, using atmospheric observing systems. Measurements of the O 2 /N 2 ratio and the CO 2 concentration in the proximity of a CCS site may allow detection of point leaks of the order of 1000 ton CO 2 yr −1 from a CCS reservoir up to 1 km from the source. Measurements of O 2 /N 2 and CO 2 in background air from a global network may allow quantification of global and hemispheric capture rates from CCS to the order of ±0.4 Pg C yr −1 .


Author(s):  
Patricia N. Seevam ◽  
Julia M. Race ◽  
Martin J. Downie ◽  
Phil Hopkins

Climate change has been attributed to greenhouse gases with carbon dioxide (CO2) being the major contributor. Most of these CO2 emissions originate from the burning of fossil fuels (e.g. power plants). Governments and industry worldwide are now proposing to capture CO2 from their power plants and either store it in depleted reservoirs or saline aquifers (‘Carbon Capture and Storage’, CCS), or use it for ‘Enhanced Oil Recovery’ (EOR) in depleting oil and gas fields. The capture of this anthropogenic (man made sources of CO2) CO2 will mitigate global warming, and possibly reduce the impact of climate change. The United States has over 30 years experience with the transportation of carbon dioxide by pipeline, mainly from naturally occurring, relatively pure CO2 sources for onshore EOR. CCS projects differ significantly from this past experience as they will be focusing on anthropogenic sources from major polluters such as fossil fuel power plants, and the necessary CO2 transport infrastructure will involve both long distance onshore and offshore pipelines. Also, the fossil fuel power plants will produce CO2 with varying combinations of impurities depending on the capture technology used. CO2 pipelines have never been designed for these differing conditions; therefore, CCS will introduce a new generation of CO2 for transport. Application of current design procedures to the new generation pipelines is likely to yield an over-designed pipeline facility, with excessive investment and operating cost. In particular, the presence of impurities has a significant impact on the physical properties of the transported CO2 which affects: pipeline design; compressor/pump power; repressurisation distance; pipeline capacity. These impurities could also have implications in the fracture control of the pipeline. All these effects have direct implications for both the technical and economic feasibility of developing a carbon dioxide transport infrastructure onshore and offshore. This paper compares and contrasts the current experience of transporting CO2 onshore with the proposed transport onshore and offshore for CCS. It covers studies on the effect of physical and transport properties (hydraulics) on key technical aspects of pipeline transportation, and the implications for designing and operating a pipeline for CO2 containing impurities. The studies reported in the paper have significant implications for future CO2 transportation, and highlight a number of knowledge gaps that will have to be filled to allow for the efficient and economic design of pipelines for this ‘next’ generation of anthropogenic CO2.


2015 ◽  
Vol 3 (2) ◽  
pp. SP1-SP10 ◽  
Author(s):  
Vera Louise Hauge ◽  
Odd Kolbjørnsen

Offshore gravimetric monitoring has been introduced as a complement to seismic monitoring of fields with moving fluids. The Sleipner field in the North Sea is a fully operational carbon capture and storage facility, where [Formula: see text] is injected for storage. Gravimetric measurements are one of the geophysical monitoring methods applied, and the data have been used to estimate the in situ density and dissolution of the [Formula: see text]. We defined a Bayesian inversion of gravimetric data, and we used this to analyze gravimetric data at Sleipner field. In our approach, we included spatial uncertainty in the model and performed a Bayesian analysis of the in situ [Formula: see text] density and dissolution. We also analyzed the impact of mass changes due to gas production from the Ty Formation. Our estimates were comparable with published results.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Fabian Stenzel ◽  
Peter Greve ◽  
Wolfgang Lucht ◽  
Sylvia Tramberend ◽  
Yoshihide Wada ◽  
...  

AbstractBioenergy with carbon capture and storage (BECCS) is considered an important negative emissions (NEs) technology, but might involve substantial irrigation on biomass plantations. Potential water stress resulting from the additional withdrawals warrants evaluation against the avoided climate change impact. Here we quantitatively assess potential side effects of BECCS with respect to water stress by disentangling the associated drivers (irrigated biomass plantations, climate, land use patterns) using comprehensive global model simulations. By considering a widespread use of irrigated biomass plantations, global warming by the end of the 21st century could be limited to 1.5 °C compared to a climate change scenario with 3 °C. However, our results suggest that both the global area and population living under severe water stress in the BECCS scenario would double compared to today and even exceed the impact of climate change. Such side effects of achieving substantial NEs would come as an extra pressure in an already water-stressed world and could only be avoided if sustainable water management were implemented globally.


Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5635
Author(s):  
Simon Roussanaly ◽  
Han Deng ◽  
Geir Skaugen ◽  
Truls Gundersen

The pipeline has historically been the preferred means to transport CO2 due to its low cost for short distances and opportunities for economies of scale. However, interest in vessel-based transport of CO2 is growing. While most of the literature has assumed that CO2 shipping would take place at low pressure (at 7 barg and −46 °C), the issue of identifying best transport conditions, in terms of pressure, temperature, and gas composition, is becoming more relevant as ship-based carbon capture and storage chains move towards implementation. This study focuses on an in-depth comparison of the two primary and relevant transport pressures, 7 and 15 barg, for annual volumes up to 20 MtCO2/year and transport distances up to 2000 km. We also address the impact of a number of key factors on optimal transport conditions, including (a) transport between harbours versus transport to an offshore site, (b) CO2 pressure prior to conditioning, (c) the presence of impurities and of purity constraints, and (d) maximum feasible ship capacities for the 7 and 15 barg options. Overall, we have found that 7 barg shipping is the most cost-efficient option for the combinations of distance and annual volume where transport by ship is the cost-optimal means of transport. Furthermore, 7 barg shipping can enable significant cost reductions (beyond 30%) compared to 15 barg shipping for a wide range of annual volume capacities.


Sign in / Sign up

Export Citation Format

Share Document