scholarly journals 3D DIGITAL CADASTRE JOURNEY IN VICTORIA, AUSTRALIA

2017 ◽  
Vol IV-4/W5 ◽  
pp. 117-123 ◽  
Author(s):  
D. Shojaei ◽  
H. Olfat ◽  
M. Briffa ◽  
A. Rajabifard
Keyword(s):  
Spatial Information ◽  
Three Dimensional ◽  
Land Development ◽  
Technical Aspect ◽  
Real Property ◽  
3D Data ◽  
National Body ◽  
Development Processes ◽  
Increasing Demand ◽  
Cadastral System

Land development processes today have an increasing demand to access three-dimensional (3D) spatial information. Complex land development may need to have a 3D model and require some functions which are only possible using 3D data. Accordingly, the Intergovernmental Committee on Surveying and Mapping (ICSM), as a national body in Australia provides leadership, coordination and standards for surveying, mapping and national datasets has developed the Cadastre 2034 strategy in 2014. This strategy has a vision to develop a cadastral system that enables people to readily and confidently identify the location and extent of all rights, restrictions and responsibilities related to land and real property. <br><br> In 2014, the land authority in the state of Victoria, Australia, namely Land Use Victoria (LUV), has entered the challenging area of designing and implementing a 3D digital cadastre focused on providing more efficient and effective services to the land and property industry. LUV has been following the ICSM 2034 strategy which requires developing various policies, standards, infrastructures, and tools. Over the past three years, LUV has mainly focused on investigating the technical aspect of a 3D digital cadastre. This paper provides an overview of the 3D digital cadastre investigation progress in Victoria and discusses the challenges that the team faced during this journey. It also addresses the future path to develop an integrated 3D digital cadastre in Victoria.

scholarly journals Towards an Underground Utilities 3D Data Model for Land Administration

2019 ◽  
Vol 11 (17) ◽  
pp. 1957 ◽  
Author(s):  
Jingya Yan ◽  
Siow Jaw ◽  
Kean Soon ◽  
Andreas Wieser ◽  
Gerhard Schrotter
Keyword(s):  
Spatial Data ◽  
Data Model ◽  
Urban Areas ◽  
Spatial Information ◽  
Three Dimensional ◽  
Data Governance ◽  
Land Administration ◽  
3D Data ◽  
Underground Utilities ◽  
2D Data

With the pressure of the increasing density of urban areas, some public infrastructures are moving to the underground to free up space above, such as utility lines, rail lines and roads. In the big data era, the three-dimensional (3D) data can be beneficial to understand the complex urban area. Comparing to spatial data and information of the above ground, we lack the precise and detailed information about underground infrastructures, such as the spatial information of underground infrastructure, the ownership of underground objects and the interdependence of infrastructures in the above and below ground. How can we map reliable 3D underground utility networks and use them in the land administration? First, to explain the importance of this work and find a possible solution, this paper observes the current issues of the existing underground utility database in Singapore. A framework for utility data governance is proposed to manage the work process from the underground utility data capture to data usage. This is the backbone to support the coordination of different roles in the utility data governance and usage. Then, an initial design of the 3D underground utility data model is introduced to describe the 3D geometric and spatial information about underground utility data and connect it to the cadastral parcel for land administration. In the case study, the newly collected data from mobile Ground Penetrating Radar is integrated with the existing utility data for 3D modelling. It is expected to explore the integration of new collected 3D data, the existing 2D data and cadastral information for land administration of underground utilities.

scholarly journals Virtual Archaeology of Death and Burial: A Procedure for Integrating 3D Visualization and Analysis in Archaeothanatology

2021 ◽  
Vol 7 (1) ◽  
pp. 540-555
Author(s):  
Hayley L. Mickleburgh ◽  
Liv Nilsson Stutz ◽  
Harry Fokkens
Keyword(s):  
Spatial Information ◽  
3D Visualization ◽  
Rapid Development ◽  
Three Dimensional ◽  
3D Models ◽  
The Body ◽  
Test Case ◽  
Archaeology Of Death ◽  
Human Burials ◽  
3D Information

Abstract The reconstruction of past mortuary rituals and practices increasingly incorporates analysis of the taphonomic history of the grave and buried body, using the framework provided by archaeothanatology. Archaeothanatological analysis relies on interpretation of the three-dimensional (3D) relationship of bones within the grave and traditionally depends on elaborate written descriptions and two-dimensional (2D) images of the remains during excavation to capture this spatial information. With the rapid development of inexpensive 3D tools, digital replicas (3D models) are now commonly available to preserve 3D information on human burials during excavation. A procedure developed using a test case to enhance archaeothanatological analysis and improve post-excavation analysis of human burials is described. Beyond preservation of static spatial information, 3D visualization techniques can be used in archaeothanatology to reconstruct the spatial displacement of bones over time, from deposition of the body to excavation of the skeletonized remains. The purpose of the procedure is to produce 3D simulations to visualize and test archaeothanatological hypotheses, thereby augmenting traditional archaeothanatological analysis. We illustrate our approach with the reconstruction of mortuary practices and burial taphonomy of a Bell Beaker burial from the site of Oostwoud-Tuithoorn, West-Frisia, the Netherlands. This case study was selected as the test case because of its relatively complete context information. The test case shows the potential for application of the procedure to older 2D field documentation, even when the amount and detail of documentation is less than ideal.

DENOISING OF THREE-DIMENSIONAL DATA CUBE USING BIVARIATE WAVELET SHRINKING

2011 ◽  
Vol 25 (03) ◽  
pp. 403-413 ◽  
Author(s):  
GUANGYI CHEN ◽  
TIEN D. BUI ◽  
ADAM KRZYZAK
Keyword(s):  
Spectral Band ◽  
Gaussian White Noise ◽  
Three Dimensional ◽  
Classical Problem ◽  
Data Cube ◽  
Wavelet Thresholding ◽  
3D Data ◽  
Signal Image ◽  
3D Data Cube ◽  
Better Than

The denoising of a natural signal/image corrupted by Gaussian white noise is a classical problem in signal/image processing. However, it is still in its infancy to denoise high dimensional data. In this paper, we extended Sendur and Selesnick's bivariate wavelet thresholding from two-dimensional (2D) image denoising to three-dimensional (3D) data cube denoising. Our study shows that bivariate wavelet thresholding is still valid for 3D data cubes. Experimental results show that bivariate wavelet thresholding on 3D data cube is better than performing 2D bivariate wavelet thresholding on every spectral band separately, VisuShrink, and Chen and Zhu's 3-scale denoising.

Navigating in a volumetric world: Metric encoding in the vertical axis of space

2013 ◽  
Vol 36 (5) ◽  
pp. 546-547 ◽  
Author(s):  
Theresa Burt de Perera ◽  
Robert Holbrook ◽  
Victoria Davis ◽  
Alex Kacelnik ◽  
Tim Guilford
Keyword(s):  
Spatial Information ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Vertical Component ◽  
Vertical Axis ◽  
Orthogonal Axis ◽  
Experimental Protocols ◽  
Three Dimensional Space ◽  
The Way

AbstractAnimals navigate through three-dimensional environments, but we argue that the way they encode three-dimensional spatial information is shaped by how they use the vertical component of space. We agree with Jeffery et al. that the representation of three-dimensional space in vertebrates is probably bicoded (with separation of the plane of locomotion and its orthogonal axis), but we believe that their suggestion that the vertical axis is stored “contextually” (that is, not containing distance or direction metrics usable for novel computations) is unlikely, and as yet unsupported. We describe potential experimental protocols that could clarify these differences in opinion empirically.

Considerations for Post-processing Parameters in Mixed-Method 3D Analyses

2021 ◽  
Vol 9 (4) ◽  
pp. 325-337
Author(s):  
Robert Z. Selden ◽  
Lauren N. Butaric ◽  
Kersten Bergstrom ◽  
Dennis Van Gerven
Keyword(s):  
Three Dimensional ◽  
Processing Parameters ◽  
Surface Model ◽  
Digital Repositories ◽  
Computed Tomographic ◽  
Archaeological Data ◽  
3D Data ◽  
Morphometric Analyses ◽  
Smoothing Parameters ◽  
Ct Data

ABSTRACTThe production of three-dimensional (3D) digital meshes of surface and computed tomographic (CT) data has become widespread in morphometric analyses of anthropological and archaeological data. Given that processing methods are not standardized, this leaves questions regarding the comparability of processed and digitally curated 3D datasets. The goal of this study was to identify those processing parameters that result in the most consistent fit between CT-derived meshes and a 3D surface model of the same human mandible. Eight meshes, each using unique thresholding and smoothing parameters, were compared to assess whole-object deviations, deviations along curves, and deviations between specific anatomical features on the surface model when compared with the CT scans using a suite of comparison points. Based on calculated gap distances, the mesh that thresholded at “0” with an applied smoothing technique was found to deviate least from the surface model, although it is not the most biologically accurate. Results have implications for aggregated studies that employ multimodal 3D datasets, and caution is recommended for studies that enlist 3D data from websites and digital repositories, particularly if processing parameters are unknown or derived for studies with different research foci.

Diagnosis of COVID-19 using 3D CT scans and vaccination for COVID-19

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Gangadhar Ch ◽  
S. Jana ◽  
Sankararao Majji ◽  
Prathyusha Kuncha ◽  
Fantin Irudaya Raj E. ◽  
...  
Keyword(s):  
Virus Isolate ◽  
Research Work ◽  
Three Dimensional ◽  
Ct Scans ◽  
Data Sets ◽  
Content Type ◽  
Infected People ◽  
3D Data ◽  
Ct Classification ◽  
First Time

Purpose For the first time in a decade, a new form of pneumonia virus, coronavirus, COVID-19, appeared in Wuhan, China. To date, it has affected millions of people, killed thousands and resulted in thousands of deaths around the world. To stop the spread of this virus, isolate the infected people. Computed tomography (CT) imaging is very accurate in revealing the details of the lungs and allows oncologists to detect COVID. However, the analysis of CT scans, which can include hundreds of images, may cause delays in hospitals. The use of artificial intelligence (AI) in radiology could help to COVID-19-positive cancer in this manner is the main purpose of the work. Design/methodology/approach CT scans are a medical imaging procedure that gives a three-dimensional (3D) representation of the lungs for clinical purposes. The volumetric 3D data sets can be regarded as axial, coronal and transverse data sets. By using AI, we can diagnose the virus presence. Findings The paper discusses the use of an AI for COVID-19, and CT classification issue and vaccination details of COVID-19 have been detailed in this paper. Originality/value Originality of the work is, all the data can be collected genuinely and did research work doneown methodology.

scholarly journals Creación de implantes 3D en procesos de conservación y restauración de vidrio arqueológico

2017 ◽  
Vol 8 (16) ◽  
pp. 103 ◽  
Author(s):  
Carmen Díaz-Marín ◽  
Elvira Aura-Castro
Keyword(s):  
3D Model ◽  
Three Dimensional ◽  
Acrylonitrile Butadiene Styrene ◽  
Virtual Model ◽  
Restricted Area ◽  
Non Invasive ◽  
3D Data ◽  
Invasive Method ◽  
Glass Bowl ◽  
Butadiene Styrene

This article describes the restoration of a glass bowl from the 16th-17thcentury by creating its three-dimensional (3D)model. The final purpose is to work with this model in order to avoid damaging situations that are associated with the manipulation of fragile objects. The gap areas, those corresponding to the missing fragments not found in the excavation, were carried out by constructing digital implants. A restricted area of the 3D model has been duplicated in order to accommodate it to confined intervals of the gap. The final implants were printed with acrylonitrile butadiene styrene (ABS) filament. These implants replace the lost areas and give stability back to the item by recovering the original morphology. The result can be compared with the outcome obtained by a traditional process, but differs due to the fact that requires minimum manipulation of the item, so it can contribute to preserve and safeguard the restored object. This is a non-invasive method which is offered as an alternative treatment, where the archaeological object is replaced by its virtual model in the steps of the process after 3D data acquisition. Significant differences have not been found in the 3D printing results obtained with the two types of filaments tested (white and clear).

scholarly journals Technologies for Digital Modeling of Spatial Information About the Area for Agricultural Production

2021 ◽  
Vol 93 ◽  
pp. 05007
Author(s):  
Elena Sazonova ◽  
Veronica Borisova ◽  
Sergey Terentyev ◽  
Olga Kramlikh ◽  
Irina Sidorenkova
Keyword(s):  
Land Management ◽  
Agricultural Production ◽  
Spatial Information ◽  
Three Dimensional ◽  
Digital Terrain Model ◽  
Main Element ◽  
Land Resources ◽  
Public Authorities ◽  
Terrain Model ◽  
Land Management System

One of the topical trends in the development of agriculture in the Russian Federation is digitalization and automation of methods for processing spatial information about various land resources. The main element of the implementation of this direction in practice can be considered a three-dimensional digital terrain model. This model allows solving many problems in the field of land management, in particular, such as analyzing the surface of the terrain in order to determine its suitability for agricultural production. Despite a number of existing problems in this area, an automated digital land management system will enable public authorities to implement an integrated and systematic approach to management, that is, to more efficiently use the land resources, influence the land market, as well as attract the investments and create the necessary conditions. for sustainable development of the territory.

scholarly journals PARAMETRIC DESIGN OF DELTA ROBOT

2016 ◽  
Vol 4 ◽  
pp. 803-806 ◽  
Author(s):  
Mert Gürgen ◽  
Cenk Eryılmaz ◽  
Vasfi Emre Ömürlü
Keyword(s):  
Computer Aided Design ◽  
Parametric Design ◽  
Three Dimensional ◽  
Theoretical Data ◽  
Technical Solution ◽  
3D Cad ◽  
3D Data ◽  
Kinematic Behavior ◽  
Delta Robot ◽  
Aided Design

This article describes a sophisticated determination and presentation of a workspace volume for a delta robot, with consideration of its kinematic behavior. With the help of theoretical equations, optimization is performed with the aid of the stiffness and dexterity analysis. Theoretical substructure is coded in Matlab and three-dimensional (3D) data for delta robot are developed in computer-aided design (CAD) environment. In later stages of the project, both 3D and theoretical data are linked together and thus, with the changing design parameter of the robot itself, the Solidworks CAD output adapts and regenerates output with a new set of parameters. To achieve an optimum workspace volume with predefined parameters, a different set of robot parameters are iterated through design optimization in Matlab, and the delta robot design is finalized and illustrated in the 3D CAD environment, Solidworks. This study provides a technical solution to accomplish a generic delta robot with optimized workspace volume.

Sign in / Sign up

Export Citation Format

Share Document