scholarly journals Switching deformation mode and mechanisms during subduction of continental crust: a case study from Alpine Corsica

Solid Earth ◽  
2017 ◽  
Vol 8 (4) ◽  
pp. 767-788 ◽  
Author(s):  
Giancarlo Molli ◽  
Luca Menegon ◽  
Alessandro Malasoma
Keyword(s):  
Shear Zone ◽  
Continental Crust ◽  
Ambient Pressure ◽  
Deformation Mode ◽  
Shear Zones ◽  
Small Scale ◽  
Low Grade ◽  
Stick Slip ◽  
Brittle Ductile Transition

Abstract. The switching in deformation mode (from distributed to localized) and mechanisms (viscous versus frictional) represent a relevant issue in the frame of crustal deformation, being also connected with the concept of the brittle–ductile transition and seismogenesis. In a subduction environment, switching in deformation mode and mechanisms and scale of localization may be inferred along the subduction interface, in a transition zone between the highly coupled (seismogenic zone) and decoupled deeper aseismic domain (stable slip). However, the role of brittle precursors in nucleating crystal-plastic shear zones has received more and more consideration being now recognized as fundamental in some cases for the localization of deformation and shear zone development, thus representing a case in which switching deformation mechanisms and scale and style of localization (deformation mode) interact and relate to each other. This contribution analyses an example of a millimetre-scale shear zone localized by brittle precursor formed within a host granitic protomylonite. The studied structures, developed in ambient pressure–temperature (P–T) conditions of low-grade blueschist facies (temperature T of ca. 300 °C and pressure P ≥ 0. 70 GPa) during involvement of Corsican continental crust in the Alpine subduction. We used a multidisciplinary approach by combining detailed microstructural and petrographic analyses, crystallographic preferred orientation by electron backscatter diffraction (EBSD), and palaeopiezometric studies on a selected sample to support an evolutionary model and deformation path for subducted continental crust. We infer that the studied structures, possibly formed by transient instability associated with fluctuations of pore fluid pressure and episodic strain rate variations, may be considered as a small-scale example of fault behaviour associated with a cycle of interseismic creep and coseismic rupture or a new analogue for episodic tremors and slow-slip structures. Our case study represents, therefore, a fossil example of association of fault structures related to stick-slip strain accommodation during subduction of continental crust.

scholarly journals Switching deformation mode and mechanisms during subduction of continental crust: a case study from Alpine Corsica

2017 ◽  
Author(s):  
Giancarlo Molli ◽  
Luca Menegon ◽  
Alessandro Malasoma
Keyword(s):  
Shear Zone ◽  
Continental Crust ◽  
Fluid Pressure ◽  
Deformation Mode ◽  
Shear Zones ◽  
Small Scale ◽  
Plastic Shear ◽  
Stick Slip ◽  
Brittle Ductile Transition

Abstract. The switching in deformation mode (from distributed to localized) and mechanisms (viscous versus frictional) represent a relevant issue in the frame of crustal deformation, being also connected with the concept of the brittle-ductile transition and seismogenesis. In subduction environment, switching in deformation mode and mechanisms may be inferred along the subduction interface, in a transition zone between the highly coupled (seismogenic zone) and decoupled deeper aseismic domain (stable slip). On the other hand, the role of brittle precursors in nucleating crystal-plastic shear zones has received more and more consideration being now recognized as fundamental in the localization of deformation and shear zone development, thus representing a case in which switching deformation mode and mechanisms interact and relate to each other. This contribution analyzes an example of a crystal plastic shear zone localized by brittle precursor formed within a host granitic-protomylonite during deformation in subduction-related environment. The studied structures, possibly formed by transient instability associated with fluctuations of pore fluid pressure and episodic strain rate variations may be considered as a small scale example of fault behaviour associated with a cycle of interseismic creep and coseismic rupture or a new analogue for episodic tremors and slow slip structures. Our case-study represents, therefore, a fossil example of association of fault structures related with stick-slip strain accomodation during subduction of continental crust.

Thermo-economic optimization of small-scale Organic Rankine Cycle: A case study for low-grade industrial waste heat recovery

Energy ◽  
2020 ◽  
Vol 213 ◽  
pp. 118898
Author(s):  
Bernardo Peris ◽  
Joaquín Navarro-Esbrí ◽  
Carlos Mateu-Royo ◽  
Adrián Mota-Babiloni ◽  
Francisco Molés ◽  
...  
Keyword(s):  
Heat Recovery ◽  
Waste Heat Recovery ◽  
Waste Heat ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Small Scale ◽  
Low Grade ◽  
Economic Optimization ◽  
Industrial Waste Heat

Regional setting and kinematic features of the Needle Falls Shear Zone, Trans-Hudson Orogen

1993 ◽  
Vol 30 (7) ◽  
pp. 1338-1354 ◽  
Author(s):  
Mel R. Stauffer ◽  
John F. Lewry
Keyword(s):  
Shear Zone ◽  
Simple Shear ◽  
Country Rock ◽  
Shear Zones ◽  
Small Scale ◽  
Lake Zone ◽  
Shear Sense ◽  
Regional Tectonic ◽  
Ductile Shear ◽  
Shear Sense Indicators

Needle Falls Shear Zone is the southern part of a major northeast-trending ductile shear system within the Paleoproterozoic Trans-Hudson Orogen in Saskatchewan. Throughout its exposed length of ~400 km, the shear zone separates reworked Archean continental crust and infolded Paleoproterozoic supracrustals of the Cree Lake Zone, to the northwest, from mainly juvenile Paleoproterozoic arc terrains and granitoid plutons of the Reindeer Zone, to the southeast. It also defines the northwest margin of the ca. 1855 Ma Wathaman Batholith, which forms the main protolith to shear zone mylonites. Although not precisely dated, available age constraints suggest that the shear zone formed between ca. 1855 and 1800 Ma, toward the end of peak thermotectonism in this part of the orogen.In the Needle Falls study area, shear zone mylonites exhibit varied, sequentially developed, ductile to brittle fabric features, including C–S fabrics, winged porphyroclasts (especially delta type), small-scale compressional and extensional microfaults ranging from thin ductile shear zones to late brittle faults, early isoclinal and sheath folds, later asymmetric folds related to compressional microfaults, and variably rotated and (or) folded quartz veins. All ductile shear-sense indicators suggest dextral displacement, as do most later ductile–brittle transition and brittle features. In conjunction with a gently north–northeast-plunging extension lineation, such data indicate oblique east-side-up dextral movement across the shear zone. However, preexisting structures in country rock protoliths rotate into the shear zone in a sense contrary to that predicted by ideal dextral simple shear, a feature thought to reflect significant flattening across the shear zone. Other ductile to brittle fabric elements in the mylonites are consistent with general noncoaxial strain, rather than ideal simple shear. Amount of displacement cannot be measured but indirect estimates suggest approximately 40 ± 20 km.The Needle Falls Shear Zone is too small and has developed too late in regional tectonic history to be considered a crustal suture. Rather, it is interpreted as either a late-tectonic oblique collisional structure or as the result of counterclockwise oroclinal rotation of the southern part of the orogen.

scholarly journals The potential of coffee stems  gasification to provide bioenergy for coffee farms: a case study in the Colombian coffee sector

2019 ◽  
Vol 10 (4) ◽  
pp. 1137-1152 ◽  
Author(s):  
Samira Garcia-Freites ◽  
Andrew Welfle ◽  
Amanda Lea-Langton ◽  
Paul Gilbert ◽  
Patricia Thornley
Keyword(s):  
Rural Areas ◽  
Internal Combustion Engines ◽  
Smallholder Farmers ◽  
Thermochemical Conversion ◽  
Small Scale ◽  
Low Grade ◽  
Coffee Production ◽  
Coffee Sector ◽  
Low Grade Heat

AbstractThe coffee industry constitutes an important part of the global economy. Developing countries produce over 90% of world coffee production, generating incomes for around 25 million smallholder farmers. The scale of this industry poses a challenge with the generation of residues along with the coffee cultivation and processing chain. Coffee stems, obtained after pruning of coffee trees, are one of those abundant and untapped resources in the coffee supply chain. Their high lignocellulosic content, the low calorific value ranging between 17.5 and 18 MJ kg−1 and the low ash content make them a suitable solid fuel for thermochemical conversion, such as gasification. This research evaluates the feasibility of using these residues in small-scale downdraft gasifiers coupled to internal combustion engines for power and low-grade heat generation, using process modelling and the Colombian coffee sector as a case study. The producer gas properties (5.6 MJ Nm−3) and the gasifier’s performance characteristics suggest that this gas could be utilized for power generation. A cogeneration system efficiency of 45.6% could be attainable when the system’s low-grade heat is recovered for external applications, like in the coffee drying stage. An analysis of the energy demand and coffee stems availability within the Colombian coffee sector shows that the biomass production level in medium- to large-scale coffee farms is well matched to their energy demands, offering particularly attractive opportunities to deploy this bioenergy system. This work assesses the feasibility of providing coffee stem–sourced low-carbon energy for global coffee production at relevant operating scales in rural areas.

scholarly journals Transient conduit permeability controlled by a shift between compactant shear and dilatant rupture at Unzen volcano (Japan)

2021 ◽  
Author(s):  
Yan Lavallée ◽  
Takahiro Miwa ◽  
James D. Ashworth ◽  
Paul A. Wallace ◽  
Jackie E. Kendrick ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Shear Zone ◽  
Damage Zone ◽  
Volcanic Eruptions ◽  
Shear Zones ◽  
Stick Slip ◽  
Anisotropic Permeability ◽  
Unzen Volcano ◽  
Porosity And Permeability ◽  
Low Porosity

Abstract. The permeability of magma in shallow volcanic conduits controls the fluid flow and pore pressure development that regulates gas emissions and the style of volcanic eruptions. The architecture of the permeable porous structure is subject to changes as magma deforms and outgasses during ascent. Here, we present a high-resolution study of the permeability distribution across two conduit shear zones (marginal and central) developed in the dacitic spine that extruded towards the closing stages of the 1991–1995 eruption at Unzen volcano, Japan. The marginal shear zone is approximately 3.2 m wide and exhibits a 2-m wide, moderate shear zone with porosity and permeability similar to the conduit core, transitioning into a ~1-m wide, highly-sheared region with relatively low porosity and permeability, and an outer 20-cm wide cataclastic fault zone. The low porosity, highly-sheared rock further exhibits an anisotropic permeability network with slightly higher permeability along the shear plane (parallel to the conduit margin) and is locally overprinted by oblique dilational Riedel fractures. The central shear zone is defined by a 3-m long by ~9-cm wide fracture ending bluntly and bordered by a 15–40 cm wide damage zone with an increased permeability of ~3 orders of magnitude; directional permeability and resultant anisotropy could not be measured from this exposure. We interpret the permeability and porosity of the marginal shear zone to reflect the evolution of compactional (i.e., ductile) shear during ascent up to the point of rupture, estimated by Umakoshi et al. (2008), at ~500 m depth. At this point the compactional shear zone would have been locally overprinted by brittle rupture, promoting the development of a shear fault and dilational Riedel fractures during repeating phases of increased magma ascent rate, enhancing anisotropic permeability that channels fluid flow into, and along, the conduit margin. In contrast, we interpret the central shear zone as a shallow, late-stage dilational structure, which partially tore the spine core with slight displacement. We explore constraints from monitored seismicity and stick-slip behaviour to evaluate the rheological controls, which accompanied the upward shift from compactional toward dilational shear as magma approached the surface, and discuss their importance in controlling the permeability development of magma evolving from overall ductile to increasingly brittle behaviour during ascent and eruption.

The role of regional-scale shear zones in paleogeographic reconstructions: the case study of the Variscan belt in the Mediterranean area

2021 ◽  
Author(s):  
Matteo Simonetti ◽  
Rodolfo Carosi ◽  
Chiara Montomoli ◽  
Salvatore Iaccarino
Keyword(s):  
Earth Sciences ◽  
Shear Zone ◽  
Regional Scale ◽  
Shear Zones ◽  
Mediterranean Area ◽  
Variscan Belt ◽  
Metamorphic Evolution ◽  
The Mediterranean ◽  
Scale Shear

<p>Paleogeographic reconstruction and recognition of the tectono-metamorphic evolution of ancient orogenic belt is often complex. The combination of an adequate amount of paleomagnetic, metamorphic, structural and geochronological data is necessary. Fundamental data derive from the study of regional-scale shear zones, that can be directly observed, by combining detailed field work with structural analysis, microstructural analysis and petrochronology. The Southern European Variscan Belt in the Mediterranean area was partially overprinted by the Alpine cycle (Stampfli and Kozur, 2006) and correlations are mainly based on lithological similarities. Little attention has been paid to the compatibility of structures in the dispersed fragments. A main debate is the connection among the Corsica-Sardinia Block (CSB), the Maures-Tanneron Massif (MTM) and the future Alpine External Crystalline Massifs (ECM) (Stampfli et al., 2002; Advokaat et al., 2014) and if these sectors were connected by a network of shear zones of regional extent, known as the East Variscan Shear Zone (EVSZ).</p><p>We present a multidisciplinary study of shear zones cropping out in the CSB (the Posada-Asinara shear zone; Carosi et al., 2020), in the MTM (the Cavalaire Fault; Simonetti et al., 2020a) and in the ECM (the Ferriere-Mollières and the Emosson-Berard shear zones; Simonetti et al., 2018; 2020b).</p><p>Kinematic and finite strain analysis allowed to recognize a transpressional deformation, with a major component of pure shear and a variable component of simple shear, coupled with general flattening deformation. Syn-kinematic paragenesis, microstructures and quartz c-axis fabrics revealed that shear deformation, in all the studied sectors, occurred under decreasing temperature starting from amphibolite-facies up to greenschist-facies. A systematic petrochronological study (U-Th-Pb on monazite collected in the sheared rocks) was conducted in order to constrain the timing of deformation. We obtained ages ranging between ~340 Ma and ~320 Ma. Ages of ~340-330 Ma can be interpreted as the beginning of the activity of the EVSZ along its older branches while ages of ~320 Ma, obtained in all the shear zones, demonstrate that they were all active in the same time span.</p><p>The multidisciplinary approach revealed a similar kinematics and tectono-metamorphic evolution of the studied shear zones contributing to better constrain the extension and timing the EVSZ and to strength the paleogeographic reconstructions of the Southern Variscan belt during Late Carboniferous time, with important implications on the evolution of the Mediterranean area after the Late Paleozoic. This case study demonstrates how paleogeographic reconstructions could benefit from datasets obtained from large-scale structures (i.e., shear zones) that can be directly investigated.</p><p> </p><p>Advokaat et al. (2014). Earth and Planetary Science Letters 401, 183–195</p><p> </p><p>Carosi et al. (2012). Terra Nova 24, 42–51</p><p> </p><p>Carosi and Palmeri (2002). Geological Magazine 139.</p><p> </p><p>Carosi et al. (2020). Geosciences 10, 288.</p><p> </p><p>Simonetti et al (2020a). International Journal of Earth Sciences 109, 2261–2285</p><p> </p><p>Simonetti et al. (2020b). Tectonics 39</p><p> </p><p>Simonetti et al. (2018). International Journal of Earth Sciences. 107, 2163–2189</p><p> </p><p>Stampfli and Kozur (2006). Geological Society, London, Memoirs 32, 57–82</p><p> </p><p>Stampfli et al. (2002). Journal of the Virtual Explorer 8, 77</p>

Strain localization mechanism of graphitic carbon-bearing rocks: Constraints from microstructure, texture and graphite geothermometry

2021 ◽  
Author(s):  
Meixia Lyu ◽  
Shuyun Cao
Keyword(s):  
Shear Zone ◽  
Strain Localization ◽  
Carbonaceous Material ◽  
Shear Zones ◽  
Graphitic Carbon ◽  
Maximum Temperature ◽  
Low Grade ◽  
High Grade ◽  
Grade Metamorphism ◽  
Average Temperature

<p><strong>Abstracts:</strong></p><p>Graphitic carbon-bearing rocks can occur in low- to high-grade metamorphic units. In low-grade matamorphic rocks, graphitic carbon is often associated with brittle fault gouge whereas in middle- to high-grade metamorphic rocks, graphitic carbon commonly occurs in marble, schist or paragneiss. Previous studies showed that carbonaceous material gradually ordered from the amorphous stage, e.g. graphitization, is mainly controlled by increasing thermal metamorphism and has a good correlation with the metamorphic temperature. Besides, this ordered process is irreversible and the resulting structure is not affected by late metamorphism. Subsequently, the degree of graphitization is believed to be a reliable indicator of peak temperature conditions in the metamorphic rock. In this contribution, based on detailed field observations, the variably deformed and metamorphosed graphitic gneisses to phyllites, located within the footwall and hanging-walls unit of the Cenozoic Ailaoshan-Red River strike-slip shear zone are studied. According to lithological features and temperature determined by Raman spectra of carbonaceous material, these graphitic rocks and deformation fabrics are divided into three types. Type I is represented by medium–grade metamorphism and strongly deformed rocks with an average temperature of 509 °C and a maximum temperature of 604 °C. Type II is affected by low-grade metamorphism and deformed rocks with an average temperature of 420 °C. Type III is affected by lower–grade metamorphism and occurs in weakly deformed/undeformed rocks with an average temperature of 350 °C. Slip–localized micro–shear zone and laterally continuous or discontinuous slip planes constituted by graphitic carbon aggregates are developed in Types I and II. The electron back–scattered diffraction (EBSD) lattice preferred orientation (LPO) patterns of graphitic carbon grains were firstly observed in comparison with LPO patterns of quartz and switch from basal <a>, rhomb <a> to prism <a> slip systems, which indicate increasing deformation temperatures. According to the graphitic slip–planes, micro–shear zones and mylonitic foliation constituted by graphitic carbon minerals, we also propose that the development of fine–grained amorphous carbon plays an important role in rheological weakening of the whole rock during progressive ductile shearing.</p><p><strong>Key Words:</strong> graphitic carbon, strain localization, graphitic thermometry, slip–localized micro–shear zone, rheological weakening</p>

Upper Carboniferous-Permian tectonics in Central Mediterranean: an updated revision

2020 ◽  
Author(s):  
Giancarlo Molli ◽  
Andrea Brogi ◽  
Alfredo Caggianelli ◽  
Enrico Capezzuoli ◽  
Domenico Liotta ◽  
...  
Keyword(s):  
Shear Zone ◽  
Regional Scale ◽  
Sedimentary Basins ◽  
Sedimentary Facies ◽  
Shear Zones ◽  
Low Grade ◽  
Central Mediterranean ◽  
Upper Carboniferous ◽  
Fold And Thrust Belt ◽  
Splay Faults

<p>An updated revision of the upper Carboniferous-Permian tectonics recorded in Corsica, Calabria and Tuscany is here proposed. We combine our and literature data to document how the sedimentary, tectono-metamorphic and magmatic upper Carboniferous-Permian record fits with a regional-scale tectonic scenario characterized by trascurrent fault systems associated with stretched crustal domains in which extensional regional structures, magmatism and transtensional basins developed. In Corsica, altogether with well-known effusive and intrusive Permian magmatism, the alpine S.Lucia nappe exposes a kilometer-scale portion of the Permian lower to mid-crust, with many similarities to the Ivrea-Verbano zone. The two distinct Mafic and Leucogranitic complexes, which characterize this crustal domain are juxtposed by an oblique-slip shear zone named as S.Lucia Shear Zone. Structural and petrological data document interaction between magmatism, metamorphism and shearing during Permian in the c. 800-400 °C temperature range. In Calabria (Sila, Serre and Aspromonte), a continuous pre-Mesozoic crustal section is exposed. The lower crust portion of such section is mainly made up of granulites and migmatitic paragneisses with subordinate marbles and metabasites. The mid-crustal section includes an up to 13 km thick sequence of granitoids of tonalitic to granitic composition, emplaced between 306 and 295 Ma and progressively deformed during retrograde extensional shearing to end with a final magmatic activity between 295 and 277 Ma, consisting in the injection of shallower dykes in a transtensional regime. The section is completed by an upper crustal portion mainly formed by a Paleozoic succession deformed as a low-grade fold and thrust belt, locally overlaying medium-grade paragneiss units, and therefore as a whole reminiscent of the external/nappe zone domains of Sardinia Hercynian orogen. In Tuscany we document, how late Carboniferous/Permian shallow marine to continental sedimentary basins characterized by unconformity and abrupt change in sedimentary facies (coal-measures, red fanglomerate deposits) and acid magmatism well fit a transtensional setting with a mid-crustal shear zone linked with a system of E-W trending (in present orientation) upper crust splay faults. We will frame the whole dataset in a regional framework of first-order transcurrent shear zones network which includes a westernmost S.Lucia Shear Zone and an easternmost East Tuscan Shear Zone, with intervening crustal domains in which extensional to transtensional shearing occured.</p>

Using apatite to resolve the age and protoliths of mid-crustal shear zones: A case study from the Taxaquara Shear Zone, SE Brazil

Lithos ◽  
2020 ◽  
Vol 378-379 ◽  
pp. 105817
Author(s):  
B.V. Ribeiro ◽  
J.A. Mulder ◽  
F.M. Faleiros ◽  
C.L. Kirkland ◽  
P.A. Cawood ◽  
...  
Keyword(s):  
Shear Zone ◽  
Shear Zones ◽  
Se Brazil ◽  
Crustal Shear Zones

Geology of the shear-hosted Brookbank gold prospect in the Beardmore–Geraldton belt, Wabigoon subprovince, Ontario

2007 ◽  
Vol 44 (7) ◽  
pp. 925-946 ◽  
Author(s):  
Jerry C DeWolfe ◽  
Bruno Lafrance ◽  
Greg M Stott
Keyword(s):  
Shear Zone ◽  
Hanging Wall ◽  
Shear Zones ◽  
Gold Deposits ◽  
Iron Formation ◽  
Alteration Zone ◽  
Gold Deposition ◽  
Low Grade ◽  
Metasedimentary Rocks ◽  
Polymictic Conglomerate

The Beardmore–Geraldton belt consists of steeply dipping, intercalated panels of metavolcanic and metasedimentary rocks along the southern margin of the granite–greenstone Wabigoon subprovince in the Archean Superior Province, Ontario. It is an important past-producing gold belt that includes classic epigenetic iron-formation-hosted deposits near Geraldton and turbidite-hosted deposits, north of Beardmore. The Brookbank gold prospect belongs to a third group of related gold deposits that formed along dextral shear zones localized at contacts between panels of metasedimentary and metavolcanic rocks. The Brookbank prospect occurs along a steeply dipping shear zone at the contact between footwall polymictic conglomerate and hanging-wall calc-alkaline arc basalt. Early during shearing the basalt acted as a structural and chemical trap that localized brittle deformation, veining, and gold deposition, ankerite–sericite–chlorite–epidote–pyrite alteration, and the replacement of metamorphic magnetite and ilmenite by gold-bearing pyrite. This produced a low grade (≤5 g/t Au) ankerite-rich alteration zone that extends up to 20 m into the hanging-wall basalt. Later during shearing, gold was deposited within higher grade (≤20 g/t Au) quartz–orthoclase–pyrite alteration zones superimposed on the wider ankerite-rich alteration zone. Auriferous quartz–carbonate veins oriented clockwise and counter-clockwise to the shear zone walls are folded and boudinaged, respectively, consistent with dextral slip along the shear zone. A key finding of the study is that different groups of gold deposits in the belt, including epigenetic iron formation gold deposits near Geraldton, formed during post-2690 Ma regional dextral transpression across the belt.

Sign in / Sign up

Export Citation Format

Share Document