scholarly journals Simulated single-layer forest canopies delay Northern Hemisphere snowmelt

2019 ◽  
Vol 13 (11) ◽  
pp. 3077-3091 ◽  
Author(s):  
Markus Todt ◽  
Nick Rutter ◽  
Christopher G. Fletcher ◽  
Leanne M. Wake
Keyword(s):  
Snow Cover ◽  
Land Surface ◽  
Single Layer ◽  
Longwave Radiation ◽  
Length Change ◽  
Day Length ◽  
Forest Canopies ◽  
Diurnal Cycles ◽  
Community Land Model ◽  
The Impact

Abstract. Single-layer vegetation schemes in modern land surface models have been found to overestimate diurnal cycles in longwave radiation beneath forest canopies. This study introduces an empirical correction, based on forest-stand-scale simulations, which reduces diurnal cycles of sub-canopy longwave radiation. The correction is subsequently implemented in land-only simulations of the Community Land Model version 4.5 (CLM4.5) in order to assess the impact on snow cover. Nighttime underestimations of sub-canopy longwave radiation outweigh daytime overestimations, which leads to underestimated averages over the snow cover season. As a result, snow temperatures are underestimated and snowmelt is delayed in CLM4.5 across evergreen boreal forests. Comparison with global observations confirms this delay and its reduction by correction of sub-canopy longwave radiation. Increasing insolation and day length change the impact of overestimated diurnal cycles on daily average sub-canopy longwave radiation throughout the snowmelt season. Consequently, delay of snowmelt in land-only simulations is more substantial where snowmelt occurs early.

scholarly journals Simulated single-layer forest canopies delay Northern Hemisphere snowmelt

2019 ◽  
Author(s):  
Markus Todt ◽  
Nick Rutter ◽  
Christopher G. Fletcher ◽  
Leanne M. Wake
Keyword(s):  
Snow Cover ◽  
Boreal Forests ◽  
Single Layer ◽  
Longwave Radiation ◽  
Length Change ◽  
Day Length ◽  
Forest Canopies ◽  
Diurnal Cycles ◽  
Community Land Model ◽  
The Impact

Abstract. Single-layer vegetation schemes have been found to overestimate diurnal cycles in longwave radiation beneath forest canopies. This study derives a correction from forest stand-scale simulations, which reduces diurnal cycles of sub-canopy longwave radiation. Correction factors are subsequently implemented in land-only simulations of the Community Land Model version 4.5 (CLM4.5) in order to assess the impact on snow cover. Nighttime underestimations of sub-canopy longwave radiation outweigh daytime overestimations, which leads to underestimated averages over the snow cover season. As a result, snow temperatures are underestimated and snowmelt is delayed in CLM4.5 across evergreen boreal forests. Increasing insolation and day length change the impact of overestimated diurnal cycles on daily average sub-canopy longwave radiation throughout the snowmelt season. Consequently, delay in snowmelt is more substantial where winters are warm and snowmelt occurs early, which results in a shortened snowmelt duration across boreal forests.

The Impact of Snow Model Complexity at Three CLPX Sites

2008 ◽  
Vol 9 (6) ◽  
pp. 1464-1481 ◽  
Author(s):  
Xia Feng ◽  
Alok Sahoo ◽  
Kristi Arsenault ◽  
Paul Houser ◽  
Yan Luo ◽  
...  
Keyword(s):  
Snow Cover ◽  
Land Surface ◽  
Snow Depth ◽  
Snow Water Equivalent ◽  
Snow Accumulation ◽  
Model Complexity ◽  
Snow Albedo ◽  
Community Land Model ◽  
Snow Model ◽  
The Impact

Abstract Many studies have developed snow process understanding by exploring the impact of snow model complexity on simulation performance. This paper revisits this topic using several recently developed land surface models, including the Simplified Simple Biosphere Model (SSiB); Noah; Variable Infiltration Capacity (VIC); Community Land Model, version 3 (CLM3); Snow Thermal Model (SNTHERM); and new field measurements from the Cold Land Processes Field Experiment (CLPX). Offline snow cover simulations using these five snow models with different physical complexity are performed for the Rabbit Ears Buffalo Pass (RB), Fraser Experimental Forest headquarters (FHQ), and Fraser Alpine (FA) sites between 20 September 2002 and 1 October 2003. These models simulate the snow accumulation and snowpack ablation with varying skill when forced with the same meteorological observations, initial conditions, and similar soil and vegetation parameters. All five models capture the basic features of snow cover dynamics but show remarkable discrepancy in depicting snow accumulation and ablation, which could result from uncertain model physics and/or biased forcing. The simulated snow depth in SSiB during the snow accumulation period is consistent with the more complicated CLM3 and SNTHERM; however, early runoff is noted, owing to neglected water retention within the snowpack. Noah is consistent with SSiB in simulating snow accumulation and ablation at RB and FA, but at FHQ, Noah underestimates snow depth and snow water equivalent (SWE) as a result of a higher net shortwave radiation at the surface, resulting from the use of a small predefined maximum snow albedo. VIC and SNTHERM are in good agreement with each other, and they realistically reproduce snow density and net radiation. CLM3 is consistent with VIC and SNTHERM during snow accumulation, but it shows early snow disappearance at FHQ and FA. It is also noted that VIC, CLM3, and SNTHERM are unable to capture the observed runoff timing, even though the water storage and refreezing effects are included in their physics. A set of sensitivity experiments suggest that Noah’s snow simulation is improved with a higher maximum albedo and that VIC exhibits little improvement with a larger fresh snow albedo. There are remarkable differences in the vegetation impact on snow simulation for each snow model. In the presence of forest cover, SSiB shows a substantial increase in snow depth and SWE, Noah and VIC show a slight change though VIC experiences a later onset of snowmelt, and CLM3 has a reduction in its snow depth. Finally, we observe that a refined precipitation dataset significantly improves snow simulation, emphasizing the importance of accurate meteorological forcing for land surface modeling.

A Stochastic Parameter Perturbation Method to Represent Uncertainty in a Microphysics Scheme

2021 ◽  
Author(s):  
Gregory Thompson ◽  
Judith Berner ◽  
Maria Frediani ◽  
Jason A. Otkin ◽  
Sarah M. Griffin
Keyword(s):  
Land Surface ◽  
Large Scale ◽  
Random Perturbation ◽  
Longwave Radiation ◽  
Parameter Uncertainties ◽  
Microphysics Scheme ◽  
Convective Systems ◽  
Temporal Correlations ◽  
Precipitation Characteristics ◽  
The Impact

AbstractCurrent state-of-the art regional numerical weather forecasts are run at horizontal grid spacings of a few kilometers, which permits medium to large-scale convective systems to be represented explicitly in the model. With the convection parameterization no longer active, much uncertainty in the formulation of subgrid-scale processes moves to other areas such as the cloud microphysical, turbulence, and land-surface parameterizations. The goal of this study is to investigate experiments with stochastically-perturbed parameters (SPP) within a microphysics parameterization and the model’s horizontal diffusion coefficients. To estimate the “true” uncertainty due to parameter uncertainty, the magnitudes of the perturbations are chosen as realistic as possible and not with purposeful intent of maximal forecast impact as some prior work has done. Spatial inhomogeneities and temporal persistence are represented using a random perturbation pattern with spatial and temporal correlations. The impact on the distributions of various hydrometeors, precipitation characteristics, and solar/longwave radiation are quantified for a winter and summer case. In terms of upscale error growth, the impact is relatively small and consists primarily of triggering atmospheric instabilities in convectively unstable regions. In addition, small in situ changes with potentially large socio-economic impacts are observed in the precipitation characteristics such as maximum hail size. Albeit the impact of introducing physically-based parameter uncertainties within the bounds of aerosol uncertainties is small, their influence on the solar and longwave radiation balances may still have important implications for global model simulations of future climate scenarios.

scholarly journals Combined measurement and modeling of the hydrological impact of hydraulic redistribution using CLM4.5 at eight AmeriFlux sites

2016 ◽  
Vol 20 (5) ◽  
pp. 2001-2018 ◽  
Author(s):  
Congsheng Fu ◽  
Guiling Wang ◽  
Michael L. Goulden ◽  
Russell L. Scott ◽  
Kenneth Bible ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Bowen Ratio ◽  
Hydraulic Redistribution ◽  
Energy Budgets ◽  
Vegetation Types ◽  
Ecological Processes ◽  
Community Land Model ◽  
Hydrological Impact ◽  
The Impact

Abstract. Effects of hydraulic redistribution (HR) on hydrological, biogeochemical, and ecological processes have been demonstrated in the field, but the current generation of standard earth system models does not include a representation of HR. Though recent studies have examined the effect of incorporating HR into land surface models, few (if any) have done cross-site comparisons for contrasting climate regimes and multiple vegetation types via the integration of measurement and modeling. Here, we incorporated the HR scheme of Ryel et al. (2002) into the NCAR Community Land Model Version 4.5 (CLM4.5), and examined the ability of the resulting hybrid model to capture the magnitude of HR flux and/or soil moisture dynamics from which HR can be directly inferred, to assess the impact of HR on land surface water and energy budgets, and to explore how the impact may depend on climate regimes and vegetation conditions. Eight AmeriFlux sites with contrasting climate regimes and multiple vegetation types were studied, including the Wind River Crane site in Washington State, the Santa Rita Mesquite savanna site in southern Arizona, and six sites along the Southern California Climate Gradient. HR flux, evapotranspiration (ET), and soil moisture were properly simulated in the present study, even in the face of various uncertainties. Our cross-ecosystem comparison showed that the timing, magnitude, and direction (upward or downward) of HR vary across ecosystems, and incorporation of HR into CLM4.5 improved the model-measurement matches of evapotranspiration, Bowen ratio, and soil moisture particularly during dry seasons. Our results also reveal that HR has important hydrological impact in ecosystems that have a pronounced dry season but are not overall so dry that sparse vegetation and very low soil moisture limit HR.

scholarly journals Exploiting the sensitivity of two satellite cloud height retrievals to cloud vertical distribution

2015 ◽  
Vol 8 (3) ◽  
pp. 2623-2655
Author(s):  
C. K. Carbajal Henken ◽  
L. Doppler ◽  
R. Lindstrot ◽  
R. Preusker ◽  
J. Fischer
Keyword(s):  
Absorption Band ◽  
Vertical Distribution ◽  
Land Surface ◽  
Weather Prediction ◽  
Single Layer ◽  
Thermal Infrared ◽  
Vertical Extent ◽  
Cloud Height ◽  
The Difference ◽  
The Impact

Abstract. This work presents a study on the sensitivity of two satellite cloud height retrievals to cloud vertical distribution. The difference in sensitivity is exploited by relating the difference in the retrieved cloud heights to cloud vertical extent. The two cloud height retrievals, performed within the Freie Universität Berlin AATSR MERIS Cloud (FAME-C) algorithm, are based on independent measurements and different retrieval techniques. First, cloud top temperature (CTT) is retrieved from Advanced Along Track Scanning Radiometer (AATSR) measurements in the thermal infrared. Second, cloud top pressure (CTP) is retrieved from Medium Resolution Imaging Spectrometer (MERIS) measurements in the oxygen-A absorption band. Both CTT and CTP are converted to cloud top height (CTH) using atmospheric profiles from a numerical weather prediction model. A sensitivity study using radiative transfer simulations in the near-infrared and thermal infrared were performed to demonstrate the larger impact of the assumed cloud vertical extinction profile on MERIS than on AATSR top-of-atmosphere measurements. The difference in retrieved CTH (ΔCTH) from AATSR and MERIS are related to cloud vertical extent (CVE) as observed by ground-based lidar and radar at three ARM sites. To increase the impact of the cloud vertical extinction profile on the MERIS-CTP retrievals, single-layer and geometrically thin clouds are assumed in the forward model. The results of the comparison to the ground-based observations were separated into single-layer and multi-layer cloud cases. Analogous to previous findings, the MERIS-CTP retrievals appear to be close to pressure levels in the middle of the cloud. Assuming a linear relationship, the ΔCTH multiplied by 2.5 gives an estimate on the CVE for single-layer clouds. The relationship is weaker for multi-layer clouds. Due to large variations of cloud vertical extinction profiles occurring in nature, a quantitative estimate of the cloud vertical extent is accompanied with large uncertainties. Yet, estimates of the CVE can contribute to the characterization of a cloudy scene. To demonstrate the plausibility of the approach, an estimate of the CVE was applied to a case study. In light of the follow-up mission Sentinel-3 with AATSR and MERIS like instruments, Sea and Land Surface Temperature Radiometer (SLSTR) and (Ocean and Land Colour Instrument) OLCI, respectively, for which the FAME-C algorithm can be easily adapted, a more accurate estimate of the CVE can be expected. OLCI will have three channels in the oxygen-A absorption band, thus providing more pieces of information on the cloud vertical extinction profile.

scholarly journals Combined measurement and modeling of the hydrological impact of hydraulic redistribution using CLM4.5 at eight AmeriFlux sites

2016 ◽  
Author(s):  
C. Fu ◽  
G. Wang ◽  
M. L. Goulden ◽  
R. L. Scott ◽  
K. Bible ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Hydraulic Redistribution ◽  
Energy Budgets ◽  
Soil Moisture Dynamics ◽  
Community Land Model ◽  
The Us ◽  
Hydrological Impact ◽  
The Impact ◽  
Moisture Dynamics

Abstract. Effects of hydraulic redistribution (HR) on hydrological, biogeochemical, and ecological processes have been demonstrated in the field, but the current generation of standard earth system models does not include a representation of HR. Though recent studies have examined the effect of incorporating HR into land surface models, few (if any) has tackled the magnitude of the HR flux itself or the soil moisture dynamics from which HR magnitude can be directly inferred. Here we incorporated Ryel et al.'s (2002) empirical equation describing HR into the NCAR Community Land Model Version 4.5 (CLM4.5), and examined the ability of the resulting hybrid model to capture the magnitude of HR flux and/or soil moisture dynamics from which HR can be directly inferred, to assess the impact of HR on surface water and energy budgets, and to explore how it may depend on climate regimes and vegetation conditions. Eight AmeriFlux sites characterized by contrasting climate regimes and multiple vegetation types were studied, including the US-Wrc Wind River Crane site in Washington State, the US-SRM Santa Rita Mesquite Savanna site in southern Arizona, and six sites along the Southern California Climate Gradient (US-SCs, g, f, w, c, and d). HR flux, evapotranspiration, and soil moisture were properly simulated in the present study, even in the face of various uncertainties. Our cross-ecosystem comparison showed that the timing, magnitude, and direction (upward or downward) of HR vary across ecosystems, and incorporation of HR into CLM4.5 improved the model-measurement match particularly during dry seasons. Our results also reveal that HR has important hydrological impact (on evapotranspiration, Bowen ratio, and soil moisture) in ecosystems that have a pronounced dry season but are not overall so dry that sparse vegetation and very low soil moisture limit HR.

scholarly journals The impact of clouds, land use and snow cover on climate in the Canadian Prairies

2016 ◽  
Vol 13 ◽  
pp. 37-42 ◽  
Author(s):  
Alan K. Betts ◽  
Raymond L. Desjardins ◽  
Devon E. Worth
Keyword(s):  
Land Use ◽  
Snow Cover ◽  
Air Temperature ◽  
Land Surface ◽  
Agricultural Land ◽  
Summer Precipitation ◽  
Climate Data ◽  
Canadian Prairies ◽  
Cloud Forcing ◽  
The Impact

Abstract. This study uses 55 years of hourly observations of air temperature, relative humidity, daily precipitation, snow cover and cloud cover from 15 climate stations across the Canadian Prairies to analyze biosphere-atmosphere interactions. We will provide examples of the coupling between climate, snow cover, clouds, and land use. Snow cover acts as a fast climate switch. With the first snow fall, air temperature falls by 10 °C, and a similar increase in temperature occurs with snow melt. Climatologically, days with snow cover are 10 °C cooler than days with no snow cover in Alberta. However the interannual variability has a larger range, so that for every 10 % decrease in days with snow cover, the mean October to April climate is warmer by 1.4 to 1.5 °C. Snow cover also transforms the coupling between clouds and the diurnal cycle of air temperature from a boundary layer regime dominated by shortwave cloud forcing in the warm season to one dominated by longwave cloud forcing with snow cover. Changing agricultural land use in the past thirty years, specifically the reduction of summer fallowing, has cooled and moistened the growing season climate and increased summer precipitation. These hourly climate data provide a solid observational basis for understanding land surface coupling, which can be used to improve the representation of clouds and land-surface processes in atmospheric models.

scholarly journals Identification of key parameters controlling demographicallystructured vegetation dynamics in a Land Surface Model [CLM4.5(ED)]

2019 ◽  
Author(s):  
Elias C. Massoud ◽  
Chonggang Xu ◽  
Rosie Fisher ◽  
Ryan Knox ◽  
Anthony Walker ◽  
...  
Keyword(s):  
Land Surface ◽  
Canopy Structure ◽  
Land Surface Model ◽  
Carbon Stocks ◽  
Surface Model ◽  
Model Parameters ◽  
Growth Strategies ◽  
Community Land Model ◽  
Vegetation Models ◽  
The Impact

Abstract. Vegetation plays a key role in regulating global carbon cycles and is a key component of the Earth System Models (ESMs) aimed to project Earth's future climates. In the last decade, the vegetation component within ESMs has witnessed great progresses from simple 'big-leaf' approaches to demographically-structured approaches, which has a better representation of plant size, canopy structure, and disturbances. The demographically-structured vegetation models are typically controlled by a large number of parameters, and sensitivity analysis is generally needed to quantify the impact of each parameter on the model outputs for a better understanding of model behaviors. In this study, we use the Fourier Amplitude Sensitivity Test (FAST) to diagnose the Community Land Model coupled to the Ecosystem Demography Model, or CLM4.5(ED). We investigate the first and second order sensitivities of the model parameters to outputs that represent simulated growth and mortality as well as carbon fluxes and stocks. While the photosynthetic capacity parameter Vc,max25 is found to be important for simulated carbon stocks and fluxes, we also show the importance of carbon storage and allometry parameters, which are shown here to determine vegetation demography and carbon stocks through their impacts on survival and growth strategies. The results of this study highlights the importance of understanding the dynamics of the next generation of demographically-enabled vegetation models within ESMs toward improved model parameterization and model structure for better model fidelity.

scholarly journals Impact of Surface Albedo Assimilation on Snow Estimation

2020 ◽  
Vol 12 (4) ◽  
pp. 645 ◽  
Author(s):  
Sujay Kumar ◽  
David Mocko ◽  
Carrie Vuyovich ◽  
Christa Peters-Lidard
Keyword(s):  
Snow Cover ◽  
Land Surface ◽  
Snow Depth ◽  
Surface Albedo ◽  
Land Surface Model ◽  
Snow Accumulation ◽  
High Plains ◽  
Surface Model ◽  
Fractional Snow Cover ◽  
The Impact

Surface albedo has a significant impact in determining the amount of available net radiation at the surface and the evolution of surface water and energy budget components. The snow accumulation and timing of melt, in particular, are directly impacted by the changes in land surface albedo. This study presents an evaluation of the impact of assimilating Moderate Resolution Imaging Spectroradiometer (MODIS)-based surface albedo estimates in the Noah multi-parameterization (Noah-MP) land surface model, over the continental US during the time period from 2000 to 2017. The evaluation of simulated snow depth and snow cover fields show that significant improvements from data assimilation (DA) are obtained over the High Plains and parts of the Rocky Mountains. Earlier snowmelt and reduced agreements with reference snow depth measurements, primarily over the Northeast US, are also observed due to albedo DA. Most improvements from assimilation are observed over locations with moderate vegetation and lower elevation. The aggregate impact on evapotranspiration and runoff from assimilation is found to be marginal. This study also evaluates the relative and joint utility of assimilating fractional snow cover and surface albedo measurements. Relative to surface albedo assimilation, fractional snow cover assimilation is found to provide smaller improvements in the simulated snow depth fields. The configuration that jointly assimilates surface albedo and fractional snow cover measurements is found to provide the most beneficial improvements compared to the univariate DA configurations for surface albedo or fractional snow cover. Overall, the study also points to the need for improving the albedo formulations in land surface models and the incorporation of observational uncertainties within albedo DA configurations.

scholarly journals Taking off the training wheels: the properties of a dynamic vegetation model without climate envelopes

2015 ◽  
Vol 8 (4) ◽  
pp. 3293-3357 ◽  
Author(s):  
R. A. Fisher ◽  
S. Muszala ◽  
M. Verteinstein ◽  
P. Lawrence ◽  
C. Xu ◽  
...  
Keyword(s):  
Land Surface ◽  
Plant Traits ◽  
Carbon Assimilation ◽  
Life History Strategies ◽  
Costs And Benefits ◽  
Leaf Trait ◽  
Community Land Model ◽  
Plant Trait ◽  
Vegetation Models ◽  
The Impact

Abstract. We describe an implementation of the Ecosystem Demography (ED) concept in the Community Land Model. The structure of CLM(ED) and the physiological and structural modifications applied to the CLM are presented. A major motivation of this development is to allow the prediction of biome boundaries directly from plant physiological traits via their competitive interactions. Here we investigate the performance of the model for an example biome boundary in Eastern North America. We explore the sensitivity of the predicted biome boundaries and ecosystem properties to the variation of leaf properties determined by the parameter space defined by the GLOPNET global leaf trait database. Further, we investigate the impact of four sequential alterations to the structural assumptions in the model governing the relative carbon economy of deciduous and evergreen plants. The default assumption is that the costs and benefits of deciduous vs. evergreen leaf strategies, in terms of carbon assimilation and expenditure, can reproduce the geographical structure of biome boundaries and ecosystem functioning. We find some support for this assumption, but only under particular combinations of model traits and structural assumptions. Many questions remain regarding the preferred methods for deployment of plant trait information in land surface models. In some cases, plant traits might best be closely linked with each other, but we also find support for direct linkages to environmental conditions. We advocate for intensified study of the costs and benefits of plant life history strategies in different environments, and for the increased use of parametric and structural ensembles in the development and analysis of complex vegetation models.

Sign in / Sign up

Export Citation Format

Share Document