Spectrophotometric Determination of Phenthoate in Vegetables and Fruit Samples of Kabirdham (Chhattisgarh)

2020 ◽  
Vol 33 (1) ◽  
pp. 8-17
Author(s):  
Chhaya Bhatt ◽  
Deepak Kumar Sahua ◽  
Thakur Vikram Singh ◽  
Kalpana Wani ◽  
Jyoti Goswami ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Color Change ◽  
Coupling Reaction ◽  
Molar Absorptivity ◽  
Azo Coupling ◽  
Rapid Urbanization ◽  
Relative Standard ◽  
Fruit Samples ◽  
Sensitivity Standard

A large variety of pesticides have been used in the agriculturearea to raise the quality, extend and yield storage life of crops.However, the use of pesticides has been greater than before now a day dueto the growing rapid urbanization and population. The nonstop uses ofthese pesticides have resulted in pollution of the environment and alsocaused risk to human health. For the rapid detection of selective phenthoate pesticides, we developed a simple and highly sensitive spectrophotometric method based on azo-coupling reaction. After a simple pretreatment of phenthoatewith a diazotized solution,the resulting is rapidly undergoing azo-coupling reaction with 4-aminoazobenzene with adramatic color change only in few minutes.Finally, we successfully applied the concentration of phenthoate pesticides on vegetable, fruit, water, and soil samples. In this method, we found the absorption maxima of the orange dye compound was measuredat480nm.ThecolorsystemobeysBeer’slawinthefollowingworkingrangeof5µg to 40 µg in a final solution of 25 mL. The molar absorptivity, Sandell’s sensitivity, standard deviation, and the relative standard deviation was found to be 1.083X107L mol-1 cm-1, 0.99X10-5µg cm-2, ±0.003 and 0.89% respectively. This method is simple, sensitive, andfree from interferences of other pesticides and diverse ions. Other pesticides do not interfere with the proposed method. The method is highly reproducible and has been successfully applied for the determination of phenthoate insecticides in vegetables and fruit samples.

scholarly journals Spectrophotometric determination of metoclopramide medicine in bulk form and in pharmaceuticals using orcinol as reagent

2016 ◽  
Vol 29 (2) ◽  
pp. 85-91
Author(s):  
Hanaa Khazal Abdulghareeb Taha ◽  
Mohauman Mohammed Al-Rufaie ◽  
Zahraa Yosif Motaweq
Keyword(s):  
Coupling Reaction ◽  
Molar Absorptivity ◽  
Water Soluble ◽  
Azo Coupling ◽  
Average Recovery ◽  
Yellow Color ◽  
Relative Standard ◽  
Naoh Solution ◽  
Official Procedure

Abstract A modern, accurate, simple and sensitive spectrophotometric procedure is tested for the appreciation of metoclopramide medicine as perspicuous form, as well as in various kinds of pharmaceutical dosages. The procedure depends on the interaction of metoclopramide (MCP) medicine and orcinol reagent by utilizing azo coupling reaction. The orcinol in NaOH solution middle to give a latterly ligand which reacts with copper (II) to output the complex with strong yellow color at 50°C. The resulting complex is water soluble, stable and can be determined spectrophotometrically at wavelength 459 nm. The calibration curve absorbance vs. concentration was established in the concentration range 0.6-12 ppm, and the curve followed the Beer’s law in this range. The procedure precision is given by the average recovery of 99.91% sequentially, as well as by the average relative standard deviation 0.70%, related to the amount of drug. The sensitivity is established at molar absorptivity 1.9044×104 l‧cm-1‧mol-1. The Sandell sensitivity is tested as 0.002 μg/cm2. The analytical results for the tested procedure agree with the official procedure. The interferences from medicine additives were tested. The established procedure is successfully examined on the appreciation of MCP in diverse kinds of pharmaceuticals.

scholarly journals Development and validation of spectrophotometric method for phenylephrine hydrochloride estimation in nasal drops formulations

2008 ◽  
Vol 27 (2) ◽  
pp. 149 ◽  
Author(s):  
Ivana Savić ◽  
Goran Nikolić ◽  
Vladimir Banković
Keyword(s):  
Standard Deviation ◽  
Sodium Hydroxide ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Phenylephrine Hydrochloride ◽  
Relative Standard ◽  
Development And Validation

Simple, accurate and reproducible UV-spectrophotometric method was developed and validated for the estimation of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. Phenylephrine hydrochloride was estimated at 291 nm in 1 mol⋅dm-3 sodium hydroxide (pH 13.5). Beer’s law was obeyed in the concentration range of 10–100 μg⋅cm−3 (r2 = 0.9990) in the sodium hydroxide medium. The apparent molar absorptivity was found to be 1.63×103 dm3⋅mol−1⋅cm−1. The method was tested and validated for various parameters according to the ICH (International Conference on Harmonization) guidelines. The detection and quantitation limits were found to be 0.892 and 2.969 μg⋅cm−3, respectively. The proposed method was successfully applied for the determination of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. The results demonstrated that the procedure is accurate, precise and reproducible (relative standard deviation < 1 %), while being simple, cheap and less time consuming, and hence can be suitably applied for the estimation of phenylephrine hydrochloride in different dosage forms.

scholarly journals A sensitive spectrophotometric determination of tadalafil in pharmaceutical preparations and industrial wastewater samples

2013 ◽  
Vol 10 (3) ◽  
pp. 1005-1013 ◽  
Author(s):  
Baghdad Science Journal
Keyword(s):  
Standard Deviation ◽  
Industrial Wastewater ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Average Recovery ◽  
Relative Standard ◽  
Wastewater Samples ◽  
Sensitive Spectrophotometric Method

A simple, accurate, precise, rapid, economical and a high sensitive spectrophotometric method has been developed for the determination of tadalafil in pharmaceutical preparations and industrial wastewater samples, which shows a maximum absorbance at 204 nm in 1:1 ethanol-water. Beer's law was obeyed in the range of 1-7?g/ mL ,with molar absorptivity and Sandell ? s sensitivity of 0.783x105l/mol.cm and 4.97 ng/cm2respectively, relative standard deviation of the method was less than 1.7%, and accuracy (average recovery %) was 100 ± 0. 13. The limits of detection and quantitation are 0.18 and 0.54 µg .ml-1, respectively. The method was successfully applied to the determination of tadalafil in some pharmaceutical formulations (tablets) and industrial wastewater samples. The proposed method was validated by sensitivity and precision which proves suitability for the routine analysis of tadalafil in true samples.

scholarly journals Spectrophotometric Method for Determination of Paraquat in Food and Biological Samples

1997 ◽  
Vol 80 (2) ◽  
pp. 388-391 ◽  
Author(s):  
Ritu Kesari ◽  
Manish Rai ◽  
Vinay Kumar Gupta
Keyword(s):  
Standard Deviation ◽  
Metal Ions ◽  
Relative Standard Deviation ◽  
Alkaline Medium ◽  
Spectrophotometric Method ◽  
Biological Samples ◽  
Molar Absorptivity ◽  
Relative Standard ◽  
Sensitive Spectrophotometric Method

Abstract A sensitive spectrophotometric method was developed for determination of paraquat, a widely used herbicide. Paraquat was reduced with glucose in an alkaline medium, and the blue radical ion obtained was measured at 600 nm. Beer’s law was obeyed at 0.1–1.2 ppm paraquat. The molar absorptivity was 1.26 × 105 L mol-1 cm-1. The standard deviation and relative standard deviation were ± 0.007 and 2.0%, respectively, for 5 μg paraquat/10 mL analyzed over 7 days. The method was free from interference by other commonly used pesticides and metal ions. The method may be used to the determine paraquat in plants, fruits, grains, water, blood, and urine.

scholarly journals Flotation-Spectrophotometric Method for the Determination of Aluminium ion Using Xylenol Orange

2011 ◽  
Vol 8 (4) ◽  
pp. 1528-1535 ◽  
Author(s):  
F. Nekouei ◽  
Sh. Nekouei
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Calibration Curve ◽  
Limit Of Detection ◽  
Xylenol Orange ◽  
Molar Absorptivity ◽  
Relative Standard ◽  
Ion Associate ◽  
Sensitive Method

A simple, fast, reproducible and sensitive method for the flotation- spectrophotometric determination of Al3+is reported. The apparent molar absorptivity (ε) of the ion associate was determined to be 8.35×104L mol-1cm-1. The calibration curve was linear in the concentration range of 1.0-50 ng mL-1of Al3+with a correlation coefficient of 0.9997. The limit of detection (LOD) was 0.621 ng mL. The relative standard deviation (RSD) at 10 and 30 ng mL-1of aluminium were 1.580 and 2.410% (n=7) respectively. The method was applied for measuring the amount of aluminium in water samples.

scholarly journals Spectrophotometric Determination of the Trace Amount of Thallium in Water and Urine Samples by Novel Oxidative Coupling Reaction

2009 ◽  
Vol 6 (4) ◽  
pp. 1153-1163 ◽  
Author(s):  
P. Nagaraja ◽  
N. Ghllab Saeed Al-Tayar ◽  
A. Shivakumar ◽  
A. K. Shresta ◽  
A. K. Gowda
Keyword(s):  
Coupling Reaction ◽  
Molar Absorptivity ◽  
Urine Samples ◽  
Standard Reference Materials ◽  
Oxidative Coupling Reaction ◽  
Relative Standard ◽  
Imipramine Hydrochloride ◽  
Optimum Reaction ◽  
Synthetic Standard

A novel, simple, rapid, sensitive and selective method has been proposed for the trace determination of thallium by spectrophotometric detection. This method is based on the oxidation of MBTH (3-methyl-2-benzothiazolinone hydrazone hydrochloride) by thallium(III) to form diazonium cation, which couples with IPH (Imipramine hydrochloride) in phosphoric acid medium at room temperature giving a blue colored species having a maximum absorption at 635 nm. The reagents and manifold variables influences on the sensitivity were investigated and the optimum reaction conditions have been established. The calibration curve was found to be linear over the range 0.1-5 μg mL-1with the molar absorptivity and Sandell’s sensitivity of 2.9x104L mol-1cm-1, 0.0071 μg cm-2respectively. The tolerance limit of the method towards various ions usually associated with thallium has been detected. The relative standard deviation for five replicate determination of 2μg mL-1thallium was 0.47%. The method has been successfully applied for the determination of thallium(ІΙΙ) and thallium(I) in synthetic, standard reference materials, water and urine samples with satisfactory results. The performance of the proposed method was evaluated in terms of student’st-test and variance ratioF-test, to find out the significance of proposed method over the reported methods.

scholarly journals Rapid and Sensitive Spectrophotometric Method for the Determination of the Trace Amount of Thallium (III) in Water and Urine Samples by New Oxidative Coupling Reaction

2019 ◽  
Vol 53 (4) ◽  
Author(s):  
Padmarajaiah Nagaraja ◽  
Naef Ghllab Saeed Al-Tayar ◽  
Anantharaman Shivakumar ◽  
Ashwinee Kumar Shresta ◽  
Avinash K. Gowda
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Rapid Determination ◽  
Coupling Reaction ◽  
Molar Absorptivity ◽  
Urine Samples ◽  
Oxidative Coupling Reaction ◽  
Relative Standard ◽  
Student’S T

A very simple, sensitive and fairly selective direct spectrophotometric method is presented for the rapid determination of thallium(III) at trace level. The method is based on the oxidation of 2-hydrazono-3-methyl-2,3-dihydrobenzo[d]thiazole hydrochloride (MBTH) by thallium(III) in phosphoric acid medium to form a diazoniumcation, which couples immediately with 10,11-dihydro-5Hdibenzo[b,f]azepine (IDB) at room temperature giving a blue colored species having a maximum absorption at 660 nm. The reaction conditions and other important analytical parameters were optimized.The calibration curve was found to be linear over the range of 0.1-4 μg/mL with molar absorptivity of 4.5 × 104 L mol- cm-1 and Sandell’s sensitivity of 0.00454 μg cm-2. The relative standard deviation and limit of detection have been found to be 0.58% and 0.0147 μg/mL respectively. Almost all common anions and cations are found notto interfering in matrix level of the analytical process. The method has been successfully applied for the determination of thallium(III) in synthetic standard mixtures, water and human urine samples. The performance of proposed method was evaluated in terms of student’s t-test and variance ratio F-test, to find out the significance of proposed method over the reported methods.    

Spectrophotometric Determination of Boron in Dates of Some Cultivars Grown in Saudi Arabia

1993 ◽  
Vol 76 (3) ◽  
pp. 601-603 ◽  
Author(s):  
A A Al-Warthan ◽  
S S Al-Showiman ◽  
S A Al-Tamrah ◽  
A A BaOsman
Keyword(s):  
Saudi Arabia ◽  
Standard Deviation ◽  
Relative Standard Deviation ◽  
Spectrophotometric Determination ◽  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Relative Standard ◽  
Sensitive Spectrophotometric Method

Abstract The formation of a red complex between boron and the quinalizarin reagent was investigated and used as the basis for a simple and sensitive spectrophotometric method for boron in date cultivars. At 620 nm, the absorbance was linear (r= 0.999) over the 0.25-2.5 μg/mL concentration range. The molar absorptivity was found to be 2.23 x 103mol-1cm-1 and the relative standard deviation for 10 replicates (1.0 μg/mL) was 0.97%.

Flotation-Dissolution-Spectrophotometric Determination of Phorate in Various Environmental Samples

2020 ◽  
Vol 33 (1) ◽  
pp. 18-23
Author(s):  
Harshita Sharma ◽  
Anushree Saha ◽  
Chhaya Bhatt ◽  
Kalpana Wani ◽  
Ajay Kumar Sahu ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Determination ◽  
Acidic Medium ◽  
Molar Absorptivity ◽  
Ammonium Molybdate ◽  
Organophosphate Pesticide ◽  
Organic Layers ◽  
Relative Standard ◽  
Ion Associate

The proposed method is based on flotation–dissolution an easy, impressible, extractive spectrophotometric determination, explained for easy investigation of the organophosphate pesticide phorate (O,O-diethyl S-[ethylthiomethyl] phosphorodithioate) on trace levels. A molybdophospho complex is generated when prorate is treated with ammonium molybdate in acidic medium. As an ion associate complex with methylene blue the complex is present in between of the water and organic layers which is extracted and then dissolved with acetone. The greenish blue complex produced show absorption maxima at 660 nm. Beer’s law range is found to be 0.5 to 16 µg per 10 ml for phorate. The molar absorptivity is 0.989×103 L mol-1 cm-1 and sandell’s sensitivity is 1.00×10-5 µg cm-2. Also calculated the standard deviation and relative standard deviation for the above method were ±0.006 and 1.95% respectively. The method has been applied and checked for the determination of phorate in water, soil and vegetables.

scholarly journals Colorimetric Determination of Paracetamol Using 9-Chloroacridine Reagent: Application to Pharmaceutical Formulations

2020 ◽  
Vol 63 (2) ◽  
pp. 71-78
Author(s):  
Firas Hassan Awad
Keyword(s):  
Standard Deviation ◽  
Pharmaceutical Formulations ◽  
Extraction Process ◽  
Molar Absorptivity ◽  
Colorimetric Determination ◽  
Average Recovery ◽  
Relative Standard ◽  
Recovery Percentage ◽  
The Stability

This paper aims to develop a simple, sensitive and accurate spectrophotometric method for quantitative determination of paracetamol in aqueous medium. The method is based on the reaction between the hydrolyzed paracetamol and 9-chloroacridine reagent (9-CA). The spectra of the product show maximum absorption at 436 nm. Beer's law is obeyed in the concentration range of 0.25-11 µg/mL with molar absorptivity value 5.3x103 L/mol/cm. The average recovery percentage (Rec%) is 99.27% and relative standard deviation (RSD) is :: 2.82%. In addition, the stability constant has been determined and the reaction mechanism is proposed. The method has been applied successfully for the assay of paracetamol in pharmaceutical formulations. It is found that the method does not require extraction process and it agree well with British pharmacopeia.    

Sign in / Sign up

Export Citation Format

Share Document