scholarly journals Colorimetric Determination of Paracetamol Using 9-Chloroacridine Reagent: Application to Pharmaceutical Formulations

2020 ◽  
Vol 63 (2) ◽  
pp. 71-78
Author(s):  
Firas Hassan Awad
Keyword(s):  
Standard Deviation ◽  
Pharmaceutical Formulations ◽  
Extraction Process ◽  
Molar Absorptivity ◽  
Colorimetric Determination ◽  
Average Recovery ◽  
Relative Standard ◽  
Recovery Percentage ◽  
The Stability

This paper aims to develop a simple, sensitive and accurate spectrophotometric method for quantitative determination of paracetamol in aqueous medium. The method is based on the reaction between the hydrolyzed paracetamol and 9-chloroacridine reagent (9-CA). The spectra of the product show maximum absorption at 436 nm. Beer's law is obeyed in the concentration range of 0.25-11 µg/mL with molar absorptivity value 5.3x103 L/mol/cm. The average recovery percentage (Rec%) is 99.27% and relative standard deviation (RSD) is :: 2.82%. In addition, the stability constant has been determined and the reaction mechanism is proposed. The method has been applied successfully for the assay of paracetamol in pharmaceutical formulations. It is found that the method does not require extraction process and it agree well with British pharmacopeia.    

scholarly journals A sensitive spectrophotometric determination of tadalafil in pharmaceutical preparations and industrial wastewater samples

2013 ◽  
Vol 10 (3) ◽  
pp. 1005-1013 ◽  
Author(s):  
Baghdad Science Journal
Keyword(s):  
Standard Deviation ◽  
Industrial Wastewater ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Average Recovery ◽  
Relative Standard ◽  
Wastewater Samples ◽  
Sensitive Spectrophotometric Method

A simple, accurate, precise, rapid, economical and a high sensitive spectrophotometric method has been developed for the determination of tadalafil in pharmaceutical preparations and industrial wastewater samples, which shows a maximum absorbance at 204 nm in 1:1 ethanol-water. Beer's law was obeyed in the range of 1-7?g/ mL ,with molar absorptivity and Sandell ? s sensitivity of 0.783x105l/mol.cm and 4.97 ng/cm2respectively, relative standard deviation of the method was less than 1.7%, and accuracy (average recovery %) was 100 ± 0. 13. The limits of detection and quantitation are 0.18 and 0.54 µg .ml-1, respectively. The method was successfully applied to the determination of tadalafil in some pharmaceutical formulations (tablets) and industrial wastewater samples. The proposed method was validated by sensitivity and precision which proves suitability for the routine analysis of tadalafil in true samples.

scholarly journals Estimation of Furosemide in Pharmaceutical Preparation Samples

2020 ◽  
Vol 1 (1) ◽  
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Pharmaceutical Preparation ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Oral Solution ◽  
Average Recovery ◽  
Relative Standard

A simple, accurate, precise, rapid, economical and sensitive ultraviolet spectrophotometric method has been developed for the determination of Furosemide in pharmaceutical preparations, which shows maximum absorbance at 228 nm in. Beer’s law was obeyed in the range of 1 -10 μg/ ml, with molar absorptivity of 3.5×104 L.mol-1.cm-1, relative standard deviation of the method was less than 1.4%, and accuracy (average recovery %) was 100 ± 1.0. The method was successfully applied to the determination of Furosemide in some pharmaceutical formulations (tablets, Oral solution and injection) samples. The proposed method was validated by sensitivity and precision which proves suitability for the routine analysis of Furosemide in true samples.

scholarly journals Eco- Friendly Method for the Estimation of Warfarin Sodium in Pharmaceutical Preparations and Environmental Wastewater Samples

2020 ◽  
pp. 1-3
Author(s):  
Nief Rahman Ahmed ◽  
Keyword(s):  
Industrial Wastewater ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Distilled Water ◽  
Average Recovery ◽  
Warfarin Sodium ◽  
Relative Standard ◽  
Wastewater Samples

A simple, precise, accurate, rapid, economical and sensitive ultraviolet spectrophotometric method has been developed for the determination of warfarin sodium in pharmaceutical preparations and environmental wastewater samples, which shows maximum absorbance at 310 nm in distilled water. Beer’s law was obeyed in the range of 2-30μg/ ml ,with molar absorptivity of 1.1 ×104 L.mol-1.cm-1 , relative standard deviation of the method was less than 1.8%, and accuracy (average recovery %) was 100 ± 1.0 . The method was successfully applied to the determination of warfarin sodium in some pharmaceutical formulations (Tablets) and industrial wastewater samples. The proposed method was validated by sensitivity and precision which proves suitability for the routine analysis of warfarin sodium in true samples.

scholarly journals Spectrophotometric flow injection procedure to indirect determination of paracetamol in pharmaceutical formulations using o-tolidine as reagent

2018 ◽  
Vol 33 (2) ◽  
pp. 47
Author(s):  
Orlando Fatibello-Filho ◽  
Heberth Juliano Vieira
Keyword(s):  
Standard Deviation ◽  
Detection Limit ◽  
Flow Injection ◽  
Pharmaceutical Formulations ◽  
Injection Method ◽  
Indirect Determination ◽  
Analytical Curve ◽  
Relative Standard ◽  
Injection Procedure

A spectrophotometric flow injection method for the determination of paracetamol in pharmaceutical formulations is proposed. The procedure was based on the oxidation of paracetamol by sodium hypochloride and the determination of the excess of this oxidant using o-tolidine dichloride as chromogenic reagent at 430 nm. The analytical curve was linear in the paracetamol concentration range from 8.50 x 10-6 to 2.51 x 10-4 mol L-1 with a detection limit of 5.0 x 10-6 mol L-1. The relative standard deviation was smaller than 1.2% for 1.20 x 10-4 mol L-1 paracetamol solution (n = 10). The results obtained for paracetamol in pharmaceutical formulations using the proposed flow injection method and those obtained using a USP Pharmacopoeia method are in agreement at the 95% confidence level.

scholarly journals Spectrophotometric determination of nicradipine and isradipine in pharmaceutical formulations

2009 ◽  
Vol 15 (2) ◽  
pp. 69-76 ◽  
Author(s):  
S.M. Al-Ghannam ◽  
A.M. Al-Olyan
Keyword(s):  
Standard Deviation ◽  
Detection Limit ◽  
Reaction Pathway ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Zinc Powder ◽  
Conditional Stability ◽  
Conditional Stability Constant

A sensitive spectrophotometric method was developed for the determination of some 1,4-dihydropyridine compounds namely, nicardipine and isradipine either in pure form or in pharmaceutical preparations. The method is based on the reduction of nicardipine and isradipine with zinc powder and calcium chloride followed by further reduction with sodium pentacyanoaminoferrate (II) to give violet and red products having the absorbance maximum at 546 and 539 nm with nicardipine and isradipine, respectively. Beer's law was obeyed over the concentration range 8.0-180 ?g/ml with the detection limit of 1.67 ?g/ml for nicardipine and 8.0-110 ?g/ml with the detection limit of 1.748 ?g/ml for isradipine. The analytical parameters and their effects on the reported methods were investigated. The molar absorptivity, quantization limit, standard deviation of intercept (Sa), standard deviation of slope (Sb) and standard deviation of the residuals (Sy/x) were calculated. The composition of the result compounds were found 1:1 for nicardipine and 1:2 for isradipine by Job's method and the conditional stability constant (Kf) and the free energy changes (?G) were calculated for compounds formed. The proposed method was applied successfully for the determination of nicardipine and isradipine in their dosage forms. The results obtained were in good agreement with those obtained using the reference or official methods. A proposal of the reaction pathway was presented.

scholarly journals Development and validation of spectrophotometric method for phenylephrine hydrochloride estimation in nasal drops formulations

2008 ◽  
Vol 27 (2) ◽  
pp. 149 ◽  
Author(s):  
Ivana Savić ◽  
Goran Nikolić ◽  
Vladimir Banković
Keyword(s):  
Standard Deviation ◽  
Sodium Hydroxide ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Phenylephrine Hydrochloride ◽  
Relative Standard ◽  
Development And Validation

Simple, accurate and reproducible UV-spectrophotometric method was developed and validated for the estimation of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. Phenylephrine hydrochloride was estimated at 291 nm in 1 mol⋅dm-3 sodium hydroxide (pH 13.5). Beer’s law was obeyed in the concentration range of 10–100 μg⋅cm−3 (r2 = 0.9990) in the sodium hydroxide medium. The apparent molar absorptivity was found to be 1.63×103 dm3⋅mol−1⋅cm−1. The method was tested and validated for various parameters according to the ICH (International Conference on Harmonization) guidelines. The detection and quantitation limits were found to be 0.892 and 2.969 μg⋅cm−3, respectively. The proposed method was successfully applied for the determination of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. The results demonstrated that the procedure is accurate, precise and reproducible (relative standard deviation < 1 %), while being simple, cheap and less time consuming, and hence can be suitably applied for the estimation of phenylephrine hydrochloride in different dosage forms.

scholarly journals Spectrophotometric Method for Determination of Paraquat in Food and Biological Samples

1997 ◽  
Vol 80 (2) ◽  
pp. 388-391 ◽  
Author(s):  
Ritu Kesari ◽  
Manish Rai ◽  
Vinay Kumar Gupta
Keyword(s):  
Standard Deviation ◽  
Metal Ions ◽  
Relative Standard Deviation ◽  
Alkaline Medium ◽  
Spectrophotometric Method ◽  
Biological Samples ◽  
Molar Absorptivity ◽  
Relative Standard ◽  
Sensitive Spectrophotometric Method

Abstract A sensitive spectrophotometric method was developed for determination of paraquat, a widely used herbicide. Paraquat was reduced with glucose in an alkaline medium, and the blue radical ion obtained was measured at 600 nm. Beer’s law was obeyed at 0.1–1.2 ppm paraquat. The molar absorptivity was 1.26 × 105 L mol-1 cm-1. The standard deviation and relative standard deviation were ± 0.007 and 2.0%, respectively, for 5 μg paraquat/10 mL analyzed over 7 days. The method was free from interference by other commonly used pesticides and metal ions. The method may be used to the determine paraquat in plants, fruits, grains, water, blood, and urine.

scholarly journals Flotation-Spectrophotometric Method for the Determination of Aluminium ion Using Xylenol Orange

2011 ◽  
Vol 8 (4) ◽  
pp. 1528-1535 ◽  
Author(s):  
F. Nekouei ◽  
Sh. Nekouei
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Calibration Curve ◽  
Limit Of Detection ◽  
Xylenol Orange ◽  
Molar Absorptivity ◽  
Relative Standard ◽  
Ion Associate ◽  
Sensitive Method

A simple, fast, reproducible and sensitive method for the flotation- spectrophotometric determination of Al3+is reported. The apparent molar absorptivity (ε) of the ion associate was determined to be 8.35×104L mol-1cm-1. The calibration curve was linear in the concentration range of 1.0-50 ng mL-1of Al3+with a correlation coefficient of 0.9997. The limit of detection (LOD) was 0.621 ng mL. The relative standard deviation (RSD) at 10 and 30 ng mL-1of aluminium were 1.580 and 2.410% (n=7) respectively. The method was applied for measuring the amount of aluminium in water samples.

scholarly journals A novel sensitive colorimetric determination of catecholamine drug in dosage form via oxidative coupling reaction with MBTH and potassium ferricyanide

2021 ◽  
Vol 5 (1) ◽  
pp. 51-58
Author(s):  
Safwan Ashour
Keyword(s):  
Oxidative Coupling ◽  
Colorimetric Method ◽  
Standard Free Energy ◽  
Coupling Reaction ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Potassium Ferricyanide ◽  
Colorimetric Determination ◽  
Oxidative Coupling Reaction

A new and direct colorimetric method has been established for the determination of catecholamine (methyldopa, MD) in both pure form and in pharmaceutical formulations. The method is based on the oxidative coupling reaction of MD with 3-methyl-2-benzothiazolinone hydrazone hydrochloride monohydrate (MBTH) and potassium ferricyanide at pH 10.4 in aqueous medium to form an orange product that has a maximum absorption at 460 nm. Beer's law plot showed good correlation in the concentration range of 1.0−56.0 µg mL-1, with detection limit of 0.31 µg mL-1. Molar absorptivity for the above method was found to be 6.56×103 L mol-1 cm-1. All the measurements were carried out at 25 ± 1.0 °C, the formation constant (logKf) value of colored species is 9.48 and the standard free energy (DG‡) is − 54.09 KJ mol-1. This method was applied successfully to determination of MD in tablets and the results were compared with the USP method. Common excipients used as additives in tablets do not interfere in the proposed method. The method is accurate, precise and highly reproducible, while being simple, cheap and less time consuming and hence can be suitably applied for routine analysis of MD in bulk and dosage forms.

scholarly journals H-point Standard Addition Method for the Simultaneous Spectrophotometric Determination of Captopril and Hydrochlorothiazide in Pharmaceutical Formulations

2021 ◽  
pp. 77-85
Keyword(s):  
Spectrophotometric Determination ◽  
Standard Addition ◽  
Pharmaceutical Formulations ◽  
Standard Addition Method ◽  
Addition Method ◽  
Real Samples ◽  
Relative Standard ◽  
Recovery Percentage ◽  
Precision And Accuracy

Simultaneous spectrophotometric determination of captopril and hydro-chlorothiazide in pharmaceutical formulations by the H-point standard addition method (HPSAM) is described. Absorbance at 211.5 and 230.3 nm was monitored upon the addition of standard solutions of captopril. The results showed that in prepared mixtures, captopril and hydrochlorothiazide can be determined simultaneously at concentration ratios varying from 1.0:0.8 to 2.5:1.5 μg/mL, respectively. Percentage recovery was found to be 95.33–104.37% for captopril and 96.8–105% for hydrochlorothiazide, with a relative standard deviation (RSD) of 2.46%. The method was successfully used to evaluate the antihypertensive captopril drug in a binary combination of hydrochlorothiazide in real samples with high precision and accuracy within the recovery percentage.

Sign in / Sign up

Export Citation Format

Share Document