scholarly journals Life Cycle Assessment of Autonomous Electric Field Tractors in Swedish Agriculture

2021 ◽  
Vol 13 (20) ◽  
pp. 11285
Author(s):  
Oscar Lagnelöv ◽  
Gunnar Larsson ◽  
Anders Larsolle ◽  
Per-Anders Hansson
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Global Warming Potential ◽  
Resource Scarcity ◽  
Key Factors ◽  
Agricultural Work ◽  
Single Score ◽  
Damage Categories

There is an increased interest for battery electric vehicles in multiple sectors, including agriculture. The potential for lowered environmental impact is one of the key factors, but there exists a knowledge gap between the environmental impact of on-road vehicles and agricultural work machinery. In this study, a life cycle assessment was performed on two smaller, self-driving battery electric tractors, and the results were compared to those of a conventional tractor for eleven midpoint characterisation factors, three damage categories and one weighted single score. The results showed that compared to the conventional tractor, the battery electric tractor had a higher impact in all categories during the production phase, with battery production being a majority contributor. However, over the entire life cycle, it had a lower impact in the weighted single score (−72%) and all three damage categories; human health (−74%), ecosystem impact (−47%) and resource scarcity (−67%). The global warming potential over the life cycle of the battery electric tractor was 102 kg CO2eq ha−1 y−1 compared to 293 kg CO2eq ha−1 y−1 for the conventional system. For the global warming potential category, the use phase was the most influential and the fuel used was the single most important factor.

scholarly journals Life Cycle Assessment Applications To The Dry Steam Geothermal Power Generation (Case Study: Star Energy Geothermal Wayang Windu, Ltd, Indonesia)

2019 ◽  
Author(s):  
Rina Annisa ◽  
Benno Rahardyan
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Power Plant ◽  
Environmental Impact ◽  
Global Warming Potential ◽  
Geothermal Power Plant ◽  
Continual Improvement ◽  
Acidification Potential ◽  
Geothermal Power

Geothermal potential in Indonesia estimate can produced renewable energy 29 GW, and until 2016 it still used 5% or about 1643 MW in. From that result, about 227 MW produced by Wayang Windu geothermal power plant. The Input were raw material, energy and water. These input produced electricity as main product, by product, and also other output that related to environment i.e. emission, solid waste and waste water. All environmental impacts should be controlled to comply with environmental standard, and even go beyond compliance and perform continual improvement.  This research will use Life Cycle Assessment method based on ISO 14040 and use cradle to gate concept with boundary from liquid steam production until electricity produced, and Megawatt Hours as the functional unit. Life Cycle Inventory has been done with direct input and output in the boundary and resulted that subsystem of Non Condensable Gas and condensate production have the largest environmental impact. LCI also show that every MWh electricity produced, it needed 6.87 Ton dry steam or 8.16 Ton liquid steam. Global Warming Potential (GWP) value is 0.155 Ton CO2eq./MWh, Acidification Potential (AP) 1.69 kg SO2eq./MWh, Eutrophication Potential (EP) 5.36 gPO4 eq./MWh and land use impacts 0.000024 PDF/m2. Life Cycle Impact Assessment resulted that AP contribute 78% of environmental impact and 98% resulted from H2S Non Condensable Gas. Comparison results with another dry steam geothermal power plant show that impact potential result of the company in good position and there’s a strong relation between gross production, GWP and AP value.Keywords: Life cycle assessment; Geothermal; Continual Improvement; Global Warming Potential; Acidification Potential

scholarly journals Disposable Medical Masks: Environmental Costs

2021 ◽  
Author(s):  
BURÇİN ATILGAN TÜRKMEN
Keyword(s):  
New York ◽  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Global Warming Potential ◽  
Functional Unit ◽  
Environmental Costs ◽  
Inventory Data

Abstract A massive increase in the use and production of masks worldwide has been seen in the current COVID-19 pandemic, which has contributed to reducing the transmission of the virus globally. This paper aims to evaluate the environmental impacts of disposable medical masks using the Life Cycle Assessment (LCA) method, first for the selected functional unit related to the manufacturing of one disposable medical mask and then for the global manufacturing of this type of mask in 2020. The inventory data was constructed directly from the industry. The system boundaries include the fabric, nose wire, and ear loops parts, transportation of materials, body making, ultrasonic vending, and packaging steps. The results suggest that the global warming potential of a disposable medical mask is 0.02 g CO2-Eq. for which the main contributor is the packaging step (44%) followed by the life cycle of fabric (27%), and nose wire (14%) parts. In total, 52 billion disposable medical masks used worldwide consumes 25 TJ of energy in 2020. The global warming potential of disposable medical masks supplied in a year of the COVID-19 pandemic is 1.1 Mt CO2 eq., equivalent to around 1.3 billion return flights from Istanbul to New York. This paper assessed the hotspots in the medical mask, allowing for a significant reduction in the environmental impact of mask use. This can be used as a roadmap for future mask designs.

scholarly journals Life Cycle Assessment (LCA) Pengelolaan Sampah di TPA Gunung Panggung Kabupaten Tuban, Jawa Timur

2021 ◽  
Vol 22 (2) ◽  
pp. 147-161
Author(s):  
Rahmah Arfiyah Ula ◽  
Agus Prasetya ◽  
Iman Haryanto
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Anaerobic Digestion ◽  
Environmental Impact ◽  
Waste Management ◽  
Global Warming Potential ◽  
Waste Treatment ◽  
Acidification Potential ◽  
Alternative Scenarios

ABSTRACT The primary municipal waste treatment in Tuban Regency, East Java, was landfilling, besides the small amount of the waste was turned to compost. Landfilling causes global warming, which leads to climate change due to CH4 emission. This environmental impact could be worst by the population growth that increases the amount of waste. This study aimed to evaluate the environmental impact on waste management in the Gunung Panggung landfill in Tuban Regency and its alternative scenarios using Life Cycle Assessment (LCA). Four scenarios were used in this study. They are one existing scenario and three alternative scenarios comprising landfilling, composting, and anaerobic digestion. The scope of this study includes waste transportation to waste treatment which is landfilling, composting, and anaerobic digestion (AD). The functional unit of this analysis is per ton per year of treated waste. Environmental impacts selected are global warming potential, acidification potential, and eutrophication potential. The existing waste management in Gunung Panggung landfill showed the higher global warming potential because of the emission of CO2 and cost for human health, which is 6.379.506,17 CO2 eq/year and 5,92 DALY, respectively. Scenario 3 (landfilling, composting, and AD; waste sortation 70%) showed a lower environmental impact than others, but improvements were still needed. Covering compost pile or controlling compost turning frequency was proposed for scenario 3 amendment. Keywords: environmental impact, landfill, life cycle assessment, waste management   ABSTRAK Landfill merupakan pengelolaan sampah utama di tempat pemrosesan akhir (TPA) Gunung Panggung Kabupaten Tuban. Selain landfill, pengomposan diterapkan untuk mengolah sebagian kecil sampahnya. Landfill menghasilkan gas metana yang menyebabkan pemanasan global dan memicu perubahan iklim. Pertambahan penduduk memperbanyak sampah yang perlu diolah di TPA dan dapat memperparah dampak lingkungan yang ditimbulkan. Tujuan penelitian ini adalah menilai dampak lingkungan dari pengelolaan sampah eksisting di TPA Gunung Panggung Kabupaten Tuban Jawa Timur beserta skenario alternatifnya menggunakan Life Cycle Assessment (LCA). Terdapat satu skenario eksisting dan tiga skenario alternatif pengelolaan sampah yaitu landfilling, pengomposan, dan fermentasi anaerob (anaerobic digestion). Ruang lingkup studi meliputi pengangkutan sampah, pengelolaan sampah dengan cara pengomposan, Anaerobic Digestion (AD), dan landfill. Satuan fungsional yang digunakan yakni ton sampah yang diolah per tahun. Dampak lingkungan yang dipelajari di antaranya: pemanasan global, asidifikasi, dan eutrofikasi. Dampak lingkungan skenario eksisting menunjukkan nilai tertinggi terutama pada pemanasan global (6.379.506,17 CO2eq/tahun) dan kerugian pada kesehatan manusia (5,92 DALY). Skenario alternatif 3, yang meliputi pengelolaan secara landfill, pengomposan, dan AD menunjukkan dampak lingkungan yang kecil, namun memerlukan perbaikan. Perbaikan untuk skenario 3 yaitu dengan menambahkan penutup pada tumpukan kompos atau mengontrol frekuensi pembalikan kompos untuk mengurangi emisi NH3. Kata kunci: dampak lingkungan, life cycle assessment, pengelolaan sampah, tempat pemrosesan akhir

scholarly journals Life cycle assessment and energy comparison of aseptic ohmic heating and appertization of chopped tomatoes with juice

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sami Ghnimi ◽  
Amin Nikkhah ◽  
Jo Dewulf ◽  
Sam Van Haute
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Environmental Impact ◽  
Uncertainty Analysis ◽  
Impact Assessment ◽  
Global Warming Potential ◽  
Ohmic Heating ◽  
Heating System

AbstractThe energy balance and life cycle assessment (LCA) of ohmic heating and appertization systems for processing of chopped tomatoes with juice (CTwJ) were evaluated. The data included in the study, such as processing conditions, energy consumption, and water use, were experimentally collected. The functional unit was considered to be 1 kg of packaged CTwJ. Six LCA impact assessment methodologies were evaluated for uncertainty analysis of selection of the impact assessment methodology. The energy requirement evaluation showed the highest energy consumption for appertization (156 kWh/t of product). The energy saving of the ohmic heating line compared to the appertization line is 102 kWh/t of the product (or 65% energy saving). The energy efficiencies of the appertization and ohmic heating lines are 25% and 77%, respectively. Regarding the environmental impact, CTwJ processing and packaging by appertization were higher than those of ohmic heating systems. In other words, CTwJ production by the ohmic heating system was more environmentally efficient. The tin production phase was the environmental hotspot in packaged CTwJ production by the appertization system; however, the agricultural phase of production was the hotspot in ohmic heating processing. The uncertainty analysis results indicated that the global warming potential for appertization of 1 kg of packaged CTwJ ranges from 4.13 to 4.44 kg CO2eq. In addition, the global warming potential of the ohmic heating system ranges from 2.50 to 2.54 kg CO2eq. This study highlights that ohmic heating presents a great alternative to conventional sterilization methods due to its low environmental impact and high energy efficiency.

scholarly journals Environmental impacts of wooden, plastic, and wood-polymer composite pallet: a life cycle assessment approach

2021 ◽  
Author(s):  
Md.Musharof Hussain Khan ◽  
Ivan Deviatkin ◽  
Jouni Havukainen ◽  
Mika Horttanainen
Keyword(s):  
Sensitivity Analysis ◽  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Polymer Composite ◽  
Global Warming Potential ◽  
Consequential Life Cycle Assessment ◽  
Wood Polymer ◽  
Biogenic Carbon ◽  
Wood Polymer Composite

Abstract Purpose Waste recycling is one of the essential tools for the European Union’s transition towards a circular economy. One of the possibilities for recycling wood and plastic waste is to utilise it to produce composite product. This study analyses the environmental impacts of producing composite pallets made of wood and plastic waste from construction and demolition activities in Finland. It also compares these impacts with conventional wooden and plastic pallets made of virgin materials. Methods Two different life cycle assessment methods were used: attributional life cycle assessment and consequential life cycle assessment. In both of the life cycle assessment studies, 1000 trips were considered as the functional unit. Furthermore, end-of-life allocation formula such as 0:100 with a credit system had been used in this study. This study also used sensitivity analysis and normalisation calculation to determine the best performing pallet. Result and discussion In the attributional cradle-to-grave life cycle assessment, wood-polymer composite pallets had the lowest environmental impact in abiotic depletion potential (fossil), acidification potential, eutrophication potential, global warming potential (including biogenic carbon), global warming potential (including biogenic carbon) with indirect land-use change, and ozone depletion potential. In contrast, wooden pallets showed the lowest impact on global warming potential (excluding biogenic carbon). In the consequential life cycle assessment, wood-polymer composite pallets showed the best environmental impact in all impact categories. In both attributional and consequential life cycle assessments, plastic pallet had the maximum impact. The sensitivity analysis and normalisation calculation showed that wood-polymer composite pallets can be a better choice over plastic and wooden pallet. Conclusions The overall results of the pallets depends on the methodological approach of the LCA. However, it can be concluded that the wood-polymer composite pallet can be a better choice over the plastic pallet and, in most cases, over the wooden pallet. This study will be of use to the pallet industry and relevant stakeholders.

scholarly journals Life Cycle Assessment of Households in Santiago, Chile: Environmental Hotspots and Policy Analysis

2021 ◽  
Vol 13 (5) ◽  
pp. 2525
Author(s):  
Camila López-Eccher ◽  
Elizabeth Garrido-Ramírez ◽  
Iván Franchi-Arzola ◽  
Edmundo Muñoz
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Food Consumption ◽  
Household Income ◽  
Resource Scarcity ◽  
Life Cycles ◽  
The Impact ◽  
Freshwater Eutrophication

The aim of this study is to assess the environmental impacts of household life cycles in Santiago, Chile, by household income level. The assessment considered scenarios associated with environmental policies. The life cycle assessment was cradle-to-grave, and the functional unit considered all the materials and energy required to meet an inhabitant’s needs for one year (1 inh/year). Using SimaPro 9.1 software, the Recipe Midpoint (H) methodology was used. The impact categories selected were global warming, fine particulate matter formation, terrestrial acidification, freshwater eutrophication, freshwater ecotoxicity, mineral resource scarcity, and fossil resource scarcity. The inventory was carried out through the application of 300 household surveys and secondary information. The main environmental sources of households were determined to be food consumption, transport, and electricity. Food consumption is the main source, responsible for 33% of the environmental impacts on global warming, 69% on terrestrial acidification, and 29% on freshwater eutrophication. The second most crucial environmental hotspot is private transport, whose contribution to environmental impact increases as household income rises, while public transport impact increases in the opposite direction. In this sense, both positive and negative environmental effects can be generated by policies. Therefore, life-cycle environmental impacts, the synergy between policies, and households’ socio-economic characteristics must be considered in public policy planning and consumer decisions.

scholarly journals Global Warming Potential, Variable Costs, and Water Use of a Model Greenhouse Production System for 11.4-cm Annual Plants Using Life Cycle Assessment

HortScience ◽  
2018 ◽  
Vol 53 (4) ◽  
pp. 441-444 ◽  
Author(s):  
Dewayne L. Ingram ◽  
Charles R. Hall ◽  
Joshua Knight
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Best Management Practices ◽  
Global Warming Potential ◽  
Production System ◽  
Natural Ventilation ◽  
Management Practices ◽  
Individual Plant ◽  
Environmental Controls

Life cycle assessment (LCA) was used to analyze the global warming potential (GWP) and variable costs of production system components for an 11.4-cm container of wax begonia (Begonia ×semperflorens-cultorum Hort) modeled in a gutter-connected, Dutch-style greenhouse with natural ventilation in the northeastern United States. A life cycle inventory of the model system was developed based on grower interviews and published best management practices. In this model, the GWP of input products, equipment use, and environmental controls for an individual plant would be 0.140 kilograms of carbon dioxide equivalents (kg CO2e) and the variable costs would total $0.666. Fifty-seven percent of the GWP and 43% of the variable costs would be due to the container and the portion of a 12-plant shuttle tray assigned to a plant. Electricity for irrigation and general overhead would be only 13% of GWP and 2% of variable costs. Natural gas use for heating would be 0.01% of GWP and less of the variable costs, even at a northeastern U.S. location. This was because of the rapid crop turnover and only heated for 3 months of a 50-week production year. Life cycle GWP contributions through carbon sequestration of flowering annuals after being transplanted in the landscape would be minor compared with woody plants; however, others have documented numerous benefits that enhance the human environment.

scholarly journals Comparative Life Cycle Assessment of Steel and Concrete Construction Frames: A Case Study of Two Residential Buildings in Iran

Buildings ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 54
Author(s):  
Amir Oladazimi ◽  
Saeed Mansour ◽  
Seyed Abbas Hosseinijou
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Global Warming Potential ◽  
Residential Buildings ◽  
Steel Frame ◽  
Complete Analysis ◽  
Environmental Damage ◽  
Concrete Frame

Given the fact that during the recent years the majority of buildings in Iran have been constructed either on steel or concrete frames, it is essential to investigate the environmental impacts of materials used in such constructions. For this purpose, two multi-story residential buildings in Tehran with a similar function have been considered in this study. One building was constructed with a steel frame and the other was constructed with a concrete frame. Using the life cycle assessment tool, a complete analysis of all the stages of a building’s life cycle from raw material acquisition to demolition and recycling of wastes was carried out. In this research, the environmental impacts included global warming potential in 100 years, acidification, eutrophication potential, human toxicity (cancer and non-cancer effects), resource depletion (water and mineral), climate change, fossil fuel consumption, air acidification and biotoxicity. It could be concluded from the results that the total pollution of the concrete frame in all eleven aforementioned impact factors was almost 219,000 tonnes higher than that of the steel frame. Moreover, based on the results, the concrete frame had poorer performance in all but one impact factor. With respect to global warming potential, the findings indicated there were two types of organic and non-organic gases that had an impact on global warming. Among non-organic emissions, CO2 had the biggest contribution to global warming potential, while among organic emissions, methane was the top contributor. These findings suggest the use of steel frames in the building industry in Iran to prevent further environmental damage; however, in the future, more research studies in this area are needed to completely investigate all aspects of decision on the choice of building frames, including economic and social aspects.

Assessing management options for wastewater treatment works in the context of life cycle assessment

1998 ◽  
Vol 38 (11) ◽  
pp. 23-30 ◽  
Author(s):  
F. J. Dennison ◽  
A. Azapagic ◽  
R. Clift ◽  
J. S. Colbourne
Keyword(s):  
Wastewater Treatment ◽  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Global Warming Potential ◽  
Water Utilities ◽  
Management Options ◽  
Management Regimes ◽  
Treatment And Disposal ◽  
The Uk

This paper presents the preliminary results of a Life Cycle Assessment (LCA) study comparing different wastewater treatment works, operated by Thames Water Utilities Ltd. in the UK. Fifteen works have been studied, representing a range of size and type of treatment works. Five management regimes for centralising sludge treatment and disposal were analyzed in the context of LCA to provide guidance on choosing the best practicable environmental option (BPEO). Consideration of Global warming potential indicates that the four proposed management regimes with centralisation of sludge for treatment and disposal, as adopted by Thames Water Utilities Ltd., is an environmental improvement upon the current practice. One of these options, that of complete centralisation and composting of sludge prior to disposal, exerts the least environmental impact with respect to Global warming potential. This suggests that the adoption of composting at Crawley is environmentally preferable to increasing the digestion facility at this works.

Sign in / Sign up

Export Citation Format

Share Document