scholarly journals Vibrational Analysis on Hemp and Okra Fibres Mixed Glass Fiber Polyester Composite

2021 ◽  
Vol 8 (11) ◽  
pp. 55-62
Author(s):  
Putti Venkata Siva Teja ◽  
Badatala Ooha ◽  
Kondeti Sravanth
Keyword(s):  
Glass Fiber ◽  
Natural Frequency ◽  
Natural Frequencies ◽  
Fiber Composite ◽  
Fem Analysis ◽  
Vibration Characteristics ◽  
Mode Shapes ◽  
Machine Component ◽  
Free System ◽  
Glass Fiber Composite

In transverse vibrations the element moves to and fro in a direction perpendicular to the direction of the advance of the wave. To determine the vibration characteristics i.e., natural frequencies and mode shapes, modal analysis is a process for a structure or a machine component while is being designed. In real life, aero planes, missiles, rockets, space vehicles, satellites, sub marines etc are modeled as free-free mechanical systems. In this paper an attempt was made to compare natural frequency for two composite materials- ladies finger with Glass fiber composite and Hemp with Glass fiber composite by taking as cantilever beams. The cantilever beam which is fixed at one end is vibrated to obtain the natural frequency, mode shapes at four different modes. A simple low cost demonstration experiment is performed in this paper by using common apparatus in order to compare theoretical, numerical (FEM analysis) profiles of two free-free thin two rectangular composite beams of dimensions 305*49.5* 7 in mm. Keywords: Natural frequencies, Mode shapes, Vibration characteristics, Ladies finger fiber, Hemp fiber, Glass fiber, FEM analysis, Free-Free system.

Three Dimensional Finite Element Analysis of Transverse Free Vibration of Self-Pierce Riveting Beam

2007 ◽  
Vol 344 ◽  
pp. 647-654 ◽  
Author(s):  
Xiao Cong He ◽  
Ian Pearson ◽  
Ken W. Young
Keyword(s):  
Finite Element ◽  
Young’S Modulus ◽  
Natural Frequency ◽  
Natural Frequencies ◽  
Young's Modulus ◽  
Three Dimensional ◽  
Vibration Characteristics ◽  
Mode Shapes ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

Self-pierce riveting (SPR) is nowadays widely used in the car manufacturing industry where aluminium alloys are used for body construction. For the design of mechanical structures, formed by the joining of component parts, a knowledge of the vibration characteristics of different joint types (adhesive bonding, spot welding, SPR etc) is essential. The free transverse vibration characteristics of single lap-jointed encastre SPR beams are investigated theoretically in this paper using the three dimensional finite element method (FEM). Numerical examples are provided to show the influence on the natural frequencies, natural frequency ratios and mode shapes of these beams caused by variations in the material properties (E and υ) of the sheet material. It is shown that the transverse natural frequencies of single lap jointed encastre SPR beams increases significantly as the Young’s Modulus of the sheets increases, but only slight changes are encountered for variations of Poisson’s Ratio. It is found that an exponential curve gives an acceptable fit to the relationship between natural frequency and Young’s Modulus. As expected, odd modes shapes were found to be symmetrical about the mid-length position and even modes were anti-symmetrical.

Wood-Glass Fiber Composite Materials in Structural Elements of Tram Tracks

2019 ◽  
Vol 777 (12) ◽  
pp. 73-77
Author(s):  
B.A. BONDAREV ◽  
◽  
T.N. STORODUBTSEVA ◽  
D.A. KOPALIN ◽  
S.V. KOSTIN ◽  
...  
Keyword(s):  
Composite Materials ◽  
Glass Fiber ◽  
Fiber Composite ◽  
Structural Elements ◽  
Glass Fiber Composite ◽  
Fiber Composite Materials

scholarly journals Effects of Elliptical Hole on the Correlation of Natural Frequency with Buckling Load of Basalt Laminates Composite Plates

2020 ◽  
Vol 27 (1) ◽  
pp. 216-225
Author(s):  
Buntheng Chhorn ◽  
WooYoung Jung
Keyword(s):  
Free Vibration ◽  
Natural Frequency ◽  
Natural Frequencies ◽  
Basalt Fiber ◽  
Orientation Angle ◽  
Elliptical Hole ◽  
Composite Plates ◽  
Buckling Load ◽  
Mode Shapes ◽  
Geometric Ratio

AbstractRecently, basalt fiber reinforced polymer (BFRP) is acknowledged as an outstanding material for the strengthening of existing concrete structure, especially it was being used in marine vehicles, aerospace, automotive and nuclear engineering. Most of the structures were subjected to severe dynamic loading during their service life that may induce vibration of the structures. However, free vibration studied on the basalt laminates composite plates with elliptical cut-out and correlation of natural frequency with buckling load has been very limited. Therefore, effects of the elliptical hole on the natural frequency of basalt/epoxy composite plates was performed in this study. Effects of stacking sequence (θ), elliptical hole inclination (ϕ), hole geometric ratio (a/b) and position of the elliptical hole were considered. The numerical modeling of free vibration analysis was based on the mechanical properties of BFRP obtained from the experiment. The natural frequencies as well as mode shapes of basalt laminates composite plates were numerically determined using the commercial program software (ABAQUS). Then, the determination of correlation of natural frequencies with buckling load was carried out. Results showed that elliptical hole inclination and fiber orientation angle induced the inverse proportion between natural frequency and buckling load.

Vibration-based delamination evaluation in GFRP composite beams using ANN

2021 ◽  
pp. 096739112110033
Author(s):  
TG Sreekanth ◽  
M Senthilkumar ◽  
S Manikanta Reddy
Keyword(s):  
Finite Element ◽  
Natural Frequency ◽  
Composite Structures ◽  
Composite Beams ◽  
Vibration Characteristics ◽  
Mode Shapes ◽  
Aviation Industry ◽  
Frequency Data ◽  
Fiber Reinforced ◽  
Back Propagation Algorithm

Delamination is definitely an important topic in the area of composite structures as it progressively worsens the mechanical performance of fiber-reinforced polymer composite structures in its service period. The detection and severity analysis of delaminations in engineering areas like the aviation industry is vital for safety and economic considerations. The existence of delaminations varies the vibration characteristics such as natural frequencies, mode shapes, etc. of composites and hence this indication can be effectively used for locating and quantifying the delaminations. The changes in vibration characteristics are considered as inputs for the inverse problem to determine the location and size of delaminations. In this paper Artificial Neural Network (ANN) is used for delamination evaluationof glass fiber-reinforced composite beams using natural frequency as typical vibration parameter. The Finite Element Analysis is used for generating the required dataset for ANN. The frequency-based delamination prediction technique is validated by finite element models and experimental modal analysis. The results indicate that the ANN-based back propagation algorithm can predict the location and size of delaminations in composites with good accuracy for numerical natural frequency data but the accuracy is comparitivelyless for experimental natural frequency data.

Vibration of Beams with a Single Delamination under Axial Loading

2011 ◽  
Vol 675-677 ◽  
pp. 477-480
Author(s):  
Dong Wei Shu
Keyword(s):  
Free Vibration ◽  
Natural Frequency ◽  
Analytical Solutions ◽  
Axial Load ◽  
Natural Frequencies ◽  
Axial Loading ◽  
Composite Beams ◽  
Mode Shapes ◽  
Equilibrium Conditions ◽  
Monotonic Relation

In this work analytical solutions are developed to study the free vibration of composite beams under axial loading. The beam with a single delamination is modeled as four interconnected Euler-Bernoulli beams using the delamination as their boundary. The continuity and the equilibrium conditions are satisfied between the adjoining beams. The studies show that the sizes and the locations of the delaminations significantly influence the natural frequencies and mode shapes of the beam. A monotonic relation between the natural frequency and the axial load is predicted.

Sign in / Sign up

Export Citation Format

Share Document