scholarly journals THERMODYNAMIC ANALYSIS OF ELECTRIC POWER PRODUCTION TECHNOLOGIES IN COGENERATION SYSTEMS ON FPSO AIMING TO REDUCE CO2 EMISSIONS

2021 ◽  
Vol 20 (1) ◽  
pp. 58
Author(s):  
A. G. Gallego ◽  
A. C. C. Souza ◽  
P. H. Morais ◽  
M. Modesto
Keyword(s):  
Natural Gas ◽  
Thermodynamic Analysis ◽  
Gas Turbines ◽  
Maximum Load ◽  
Dual Fuel ◽  
Complex Structures ◽  
Oil Platforms ◽  
Electric Power Production ◽  
Dual Fuel Engines ◽  
Production Technologies

Oil platforms are complex structures used to host workers and equipmentneeded in offshore exploration. This study focuses on the platform's heatand electricity cogeneration plant, which supplies a process heat exchangersnet, and provides the necessary electricity for all the equipment used for theprocess and worker's accommodation in the platform. The platform demandwith maximum load is 75 MW, which could be achieved using four gasturbines (25 MW each), one of which is kept for backup purposes or usingsix dual-fuel engines diesel/natural gas (15 MW each), one of which is alsokept for backup purposes. Therefore, the thermodynamic analysis wasperformed - considering five specific demand points of the platform -comparing the two traditional configurations (gas turbines and dual-fuelengines diesel/natural gas) and a combined configuration. The combinedconfiguration is composed of three gas turbines and two dual-fuel enginesdiesel/natural gas (one of the gas turbines kept for backup purposes). Theconfigurations presented respectively 35.5%, 48.4% and 42.6% at highestoverall efficiency; 611.34 g/kWh, 373.45 g/kWh, 472.74 g/kWh at lowestCO2 emissions considering full attendance of electrical and thermaldemands. The configurations using only gas turbines and the combinedfully attended the thermal demand of the platform without using auxiliarypieces of equipment. Therefore, it was possible to observe that thecombined configuration presented several advantages concerning isolatedsystems, proving to be an excellent option for sustainable energygeneration, reducing emissions of polluting gases and greater flexibility ofits operation concerning to configuration only with turbines, and physicaloccupation in relation to configuration only with engines.

scholarly journals CFD Study and Experimental Validation of a Dual Fuel Engine: Effect of Engine Speed

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4307
Author(s):  
Roberta De Robbio ◽  
Maria Cristina Cameretti ◽  
Ezio Mancaruso ◽  
Raffaele Tuccillo ◽  
Bianca Maria Vaglieco
Keyword(s):  
Natural Gas ◽  
High Performance ◽  
Engine Speed ◽  
Pollutant Emissions ◽  
Dual Fuel ◽  
Automotive Market ◽  
Light Duty ◽  
Viable Solution ◽  
Dual Fuel Engines ◽  
Gas Ratio

Dual fuel engines induce benefits in terms of pollutant emissions of PM and NOx together with carbon dioxide reduction and being powered by natural gas (mainly methane) characterized by a low C/H ratio. Therefore, using natural gas (NG) in diesel engines can be a viable solution to reevaluate this type of engine and to prevent its disappearance from the automotive market, as it is a well-established technology in both energy and transportation fields. It is characterized by high performance and reliability. Nevertheless, further improvements are needed in terms of the optimization of combustion development, a more efficient oxidation, and a more efficient exploitation of gaseous fuel energy. To this aim, in this work, a CFD numerical methodology is described to simulate the processes that characterize combustion in a light-duty diesel engine in dual fuel mode by analyzing the effects of the changes in engine speed on the interaction between fluid-dynamics and chemistry as well as when the diesel/natural gas ratio changes at constant injected diesel amount. With the aid of experimental data obtained at the engine test bench on an optically accessible research engine, models of a 3D code, i.e., KIVA-3V, were validated. The ability to view images of OH distribution inside the cylinder allowed us to better model the complex combustion phenomenon of two fuels with very different burning characteristics. The numerical results also defined the importance of this free radical that characterizes the areas with the greatest combustion activity.

Optimizing Maintenance for Multi-Unit Industrial Gas Turbine Installations

2010 ◽  
Author(s):  
Markus Bohlin ◽  
Mathias Wa¨rja
Keyword(s):  
Natural Gas ◽  
Gas Turbine ◽  
Preventive Maintenance ◽  
Gas Turbines ◽  
Economic Effects ◽  
Negative Effects ◽  
Component Level ◽  
Maintenance Schedule ◽  
Natural Gas Pipelines ◽  
Oil Platforms

High levels of availability and reliability are essential in many industries where production is subject to high costs due to downtime. Examples where gas turbines are used include the mechanical drive in natural gas pipelines and power generation on oil platforms, where it is common to use redundant gas turbines to mitigate the effects of service outage. In this paper, component-level maintenance of parallel multi-unit systems is considered, allowing production at a reduced level when some of the units are not operational. Units are themselves assumed to be composed out of components in a serial configuration; maintenance of one component implies shutdown of the unit. Parallel installations allow maintenance to be performed on one or a few gas turbines without taking down the entire installation. This allows maintenance to be optimized even further than in a serial system. However, the maintenance optimization process is made more complicated, since there now exist both positive and negative grouping effects. The positive grouping effects come from shared setup activities and costs, and the negative effects come from resource limitations, in this case the limited number of gas turbines which can be maintained at the same time. In the approach presented in this paper, each component has its individual preventive maintenance schedule, which is updated at inspections, changes in production and when indicated using remote condition monitoring. A minimal repair model for noncritical routine inspections and service tasks is assumed, which does not affect component state. In addition, previously developed procedures for estimating and measuring residual component lifetime for individual components during operation are used. The procedures are based on a Retirement For Cause (RFC) approach where components are not replaced until a potential failure has been detected. To maximize revenues for an operator, the available information is evaluated using software where scenario analysis and optimization is performed. To show the possible economic effects, gas turbine operation data is used together with maintenance and operator requirements as input for optimization of a production line consisting of a natural-gas compressor station having three SGT-600 gas turbines. Savings can be substantial compared to a traditional preventive maintenance plan.

Ability of the Methane Number Index of a Fuel to Predict Rapid Combustion in Heavy Duty Dual Fuel Engines for North American Locomotives

2015 ◽  
Author(s):  
Daniel G. Van Alstine ◽  
David T. Montgomery ◽  
Timothy J. Callahan ◽  
Radu C. Florea
Keyword(s):  
Natural Gas ◽  
Heat Release ◽  
Heat Release Rate ◽  
Release Rate ◽  
Fuel Combustion ◽  
Dual Fuel ◽  
Rapid Combustion ◽  
Dual Fuel Engines ◽  
Dual Fuel Combustion ◽  
Methane Number

Low natural gas prices have made the fuel an attractive alternative to diesel and other common fuels, particularly in applications that consume large quantities of fuel. The North American rail industry is examining the use of locomotives powered by dual fuel engines to realize savings in fuel costs. These dual fuel engines can substitute a large portion of the diesel fuel with natural gas that is premixed with the intake air. Engine knock in traditional premixed spark-ignited combustion is undesirable but well characterized by the Methane Number index, which quantifies the propensity of a gaseous fuel to autoignite after a period of time at high temperature. Originally developed for spark-ignited engines, the ability of the methane number index to predict a fuel’s “knock” behavior in dual fuel combustion is not as fully understood. The objective of this effort is to evaluate the ability of an existing methane number algorithm to predict rapid combustion in a dual fuel engine. Sets of specialized natural gas fuel blends that, according to the MWM methane number algorithm, should have similar knock characteristics are tested in a dual fuel engine and induced to experience rapid combustion. Test results and CFD analysis reveal that rapid or aggressive combustion rates happen late in the dual fuel combustion event with this engine hardware configuration. The transition from normal combustion to late rapid combustion is characterized by changes in the heat release rate profiles. In this study, the transition is also represented by a shift in the crank angle location of the combustion’s peak heat release rate. For fuels of similar methane number that should exhibit similar knock behavior, these transitions occur at significantly different relative air-fuel ratios, demonstrating that the existing MWM methane number algorithm, while excellent for spark-ignited engines, does not fully predict the propensity for rapid combustion to occur in a dual fuel engine within the scope of this study. This indicates that physical and chemical phenomena present in rapid or aggressive dual fuel combustion processes may differ from those in knocking spark-ignited combustion. In its current form a methane number algorithm can be used to conservatively rate dual fuel engines. It is possible that derivation of a new reactivity index that better predicts rapid combustion behavior of the gaseous fuel in dual fuel combustion would allow ratings to be less conservative.

scholarly journals Editorial: Advances in Compression Ignition Natural Gas–Diesel Dual-Fuel Engines

2021 ◽  
Vol 7 ◽  
Author(s):  
Hongsheng Guo ◽  
Hailin Li ◽  
Lino Guzzella ◽  
Masahiro Shioji
Keyword(s):  
Natural Gas ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Dual Fuel Engines

scholarly journals A Study on the High Load Operation of a Natural Gas-Diesel Dual-Fuel Engine

2020 ◽  
Vol 6 ◽  
Author(s):  
Shouvik Dev ◽  
Hongsheng Guo ◽  
Brian Liko
Keyword(s):  
Particulate Matter ◽  
Natural Gas ◽  
Diesel Engines ◽  
Thermal Efficiency ◽  
Direct Injection ◽  
High Load ◽  
Dual Fuel ◽  
Nox Emissions ◽  
Brake Thermal Efficiency ◽  
Dual Fuel Engines

Diesel fueled compression ignition engines are widely used in power generation and freight transport owing to their high fuel conversion efficiency and ability to operate reliably for long periods of time at high loads. However, such engines generate significant amounts of carbon dioxide (CO2), nitrogen oxides (NOx), and particulate matter (PM) emissions. One solution to reduce the CO2 and particulate matter emissions of diesel engines while maintaining their efficiency and reliability is natural gas (NG)-diesel dual-fuel combustion. In addition to methane emissions, the temperatures of the diesel injector tip and exhaust gas can also be concerns for dual-fuel engines at medium and high load operating conditions. In this study, a single cylinder NG-diesel dual-fuel research engine is operated at two high load conditions (75% and 100% load). NG fraction and diesel direct injection (DI) timing are two of the simplest control parameters for optimization of diesel engines converted to dual-fuel engines. In addition to studying the combined impact of these parameters on combustion and emissions performance, another unique aspect of this research is the measurement of the diesel injector tip temperature which can predict potential coking issues in dual-fuel engines. Results show that increasing NG fraction and advancing diesel direct injection timing can increase the injector tip temperature. With increasing NG fraction, while the methane emissions increase, the equivalent CO2 emissions (cumulative greenhouse gas effect of CO2 and CH4) of the engine decrease. Increasing NG fraction also improves the brake thermal efficiency of the engine though NOx emissions increase. By optimizing the combustion phasing through control of the DI timing, brake thermal efficiencies of the order of ∼42% can be achieved. At high loads, advanced diesel DI timings typically correspond to the higher maximum cylinder pressure, maximum pressure rise rate, brake thermal efficiency and NOx emissions, and lower soot, CO, and CO2-equivalent emissions.

Paper 1: Critical Factors in the Application of Dual-Fuel Engines

1969 ◽  
Vol 184 (16) ◽  
pp. 1-9
Author(s):  
P. W. A. Eke ◽  
J. H. Walker ◽  
M. A. Williams
Keyword(s):  
Natural Gas ◽  
Internal Combustion Engines ◽  
Fuel Oil ◽  
Dual Fuel ◽  
Combustion Engines ◽  
Critical Factors ◽  
Liquid Form ◽  
Compression Ignition Engine ◽  
Dual Fuel Engines ◽  
Further Development

A dual-fuel engine may be defined as a compression-ignition engine using mainly gaseous fuel but with a small quantity of fuel oil injected as an ignition source; the engine can be changed over instantaneously and under load to operate on liquid fuel alone. The recent availability of natural gas in this country once again attracts the attention of engineers towards gas as a fuel for internal-combustion engines. This paper traces the development of dual-fuel engines, originally using sewage gas and more recently using natural gas, and considers their advantages, both technical and economic, compared with spark-ignited and diesel engines. The dual-fuel engines within the authors' experience are described. The critical factors in handling natural gas in its liquid form are considered, and the extended scope of dual-fuel engines and alternative fuel engines in mobile applications is briefly reviewed. Finally, the paper examines the future for dual-fuel engines and suggests directions in which further development is required.

scholarly journals A Review on Liquefied Natural Gas as Fuels for Dual Fuel Engines: Opportunities, Challenges and Responses

Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 6127
Author(s):  
Md Arman Arefin ◽  
Md Nurun Nabi ◽  
Md Washim Akram ◽  
Mohammad Towhidul Islam ◽  
Md Wahid Chowdhury
Keyword(s):  
Natural Gas ◽  
Internal Combustion Engines ◽  
Ghg Emissions ◽  
Liquefied Natural Gas ◽  
Future Research ◽  
Dual Fuel ◽  
Combustion Engines ◽  
Emission Regulations ◽  
Dual Fuel Engines ◽  
Sustainable Fuels

Climate change and severe emission regulations in many countries demand fuel and engine researchers to explore sustainable fuels for internal combustion engines. Natural gas could be a source of sustainable fuels, which can be produced from renewable sources. This article presents a complete overview of the liquefied natural gas (LNG) as a potential fuel for diesel engines. An interesting finding from this review is that engine modification and proper utilization of LNG significantly improve system efficiency and reduce greenhouse gas (GHG) emissions, which is extremely helpful to sustainable development. Moreover, some major recent researches are also analyzed to find out drawbacks, advancement and future research potential of the technology. One of the major challenges of LNG is its higher flammability that causes different fatal hazards and when using in dual-fuel engine causes knock. Though researchers have been successful to find out some ways to overcome some challenges, further research is necessary to reduce the hazards and make the fuel more effective and environment-friendly when using as a fuel for a diesel engine.

Sign in / Sign up

Export Citation Format

Share Document