scholarly journals Experimental investigation of a small agricultural diesel engine performance using community biodiesel from wild trees

2020 ◽  
Vol 2 (1) ◽  
pp. 9-16
Author(s):  
Nigran Homdoung ◽  
Kittikorn Sasujit ◽  
Natthawud Dussadee ◽  
Rameshprabu Ramaraj
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Fossil Fuels ◽  
Specific Energy Consumption ◽  
Engine Performance ◽  
Waste Cooking Oil ◽  
Exhaust Emission ◽  
Brake Thermal Efficiency ◽  
Cooking Oil ◽  
Wild Tree

The increasing consumption and demand for fossil fuels have more significance than before alarm above its lessening rate and for that reason, stimulated the actions are needed to challenge the issue with an efficient and less polluting alternative fuel for diesel. This study evaluated the performance of an 8.2 kW small diesel engine using three fuels, namely diesel, waste cooking oil biodiesel and wild tree biodiesel, such as granadilla oil biodiesel (GBD) and tung oil biodiesel (TBD). The experimental engine was tested at 1,500 rpm of constant engine speed and 20–80% of engine load. The specific fuel consumption, brake specific energy consumption, brake mean sufficient pressure, brake thermal efficiency, exhaust emission and temperature were evaluated. It was found that the small diesel engine worked well using wild trees biodiesel. The brake means effective pressures were lower by 5–8% and thermal brake efficiency was decreased in the range of 9–15%, compared with diesel fuel. The exhaust emission was lower than Thailand’s industrial standard and slightly higher than waste cooking oil biodiesel and diesel fuel operation. The operation of biodiesel from wild trees is suitable for farmers and is considered feasible for local communities in the future.

scholarly journals Evaluation of Diesel Engine Performance and Exhaust Emission Characteristics Using Waste Cooking Oil

2015 ◽  
Vol 773-774 ◽  
pp. 425-429 ◽  
Author(s):  
Nur Atiqah Ramlan ◽  
Abdul Adam Abdullah ◽  
Mohd Herzwan Hamzah ◽  
Nur Fauziah Jaharudin ◽  
Rizalman Mamat
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Fossil Fuels ◽  
Engine Speed ◽  
Engine Performance ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Exhaust Emission ◽  
Cooking Oil ◽  
Conventional Diesel Fuel

The depletion of fossil fuels as well as the rises of greenhouse gases had caused most government worldwide to follow the international energy policies for the use of biodiesel. One of the economical sources for biodiesel production is waste cooking oil. The use of waste cooking oil is more sustainable if they can perform similarly to conventional diesel fuel. This paper deals with the experimental study carried out to evaluate the engine performance and exhaust emission of diesel engine operated by biodiesel from waste cooking oil at various engine speed. The biodiesel used are known as B5, which contains of 5% of waste cooking oil and 95% of diesel fuel. The other one is B20, which contains of 20% of waste cooking oil plus 80% of diesel. Diesel was used as a comparison purposes. The results show that power and torque for B5 give the closest trend to diesel. In terms of heat release, diesel still dominates the highest value compared to B5 and B20. For exhaust emission, B5 and B20 showed improvement in the reduction of NOx and PM.

The Use of Untreated Waste Cooking Oil and Diesel Fuel Blends as IC Engine Fuels

2014 ◽  
Vol 699 ◽  
pp. 708-713
Author(s):  
Md. Isa Ali ◽  
A. Shahrir ◽  
W.M. Faizal ◽  
M.T. Iskandar
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Waste Cooking Oil ◽  
High Viscosity ◽  
Exhaust Emission ◽  
Engine Fuel ◽  
Ic Engine ◽  
Exhaust Temperature ◽  
Cooking Oil

In the present experimental investigation, untreated waste cooking oil (UWCO) was used as an alternative fuel for a diesel engine. The high viscosity of the UWCO was reduced by blending with ordinary diesel. The blends of varying proportions of UWCO and diesel were prepared, analyzed and compared with diesel fuel. Measurements of chemical and physical properties have indicated a good potential of using UWCO as an alternative diesel engine fuel. The results showed that blends containing 5 to 40% of UWCO in diesel yielded the properties closely matching that of diesel. The performance of the engine using blends of UWCO was evaluated in a four cylinder diesel engine and compared with the performance obtained with diesel. Significant improvement in the engine performance was observed. The results showed that the addition of 30% UWCO with diesel produced higher brake power with a reduction in exhaust emission such as CO2 and NOx. The specific fuel consumption and the exhaust temperature were increased due to decrease in viscosity of the UWCO. Acceptable thermal efficiencies of the engine were obtained with blends containing up to 30% volume of UWCO. From the properties and engine test result, it has been established that 10-30% of UWCO can be substituted for diesel without any engine modification.

scholarly journals Thermal Performance of Compression Ignition Engine Using High Content Biodiesels: A Comparative Study with Diesel Fuel

2021 ◽  
Vol 13 (14) ◽  
pp. 7688
Author(s):  
Asif Afzal ◽  
Manzoore Elahi M. Soudagar ◽  
Ali Belhocine ◽  
Mohammed Kareemullah ◽  
Nazia Hossain ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Fatty Acid Content ◽  
Engine Performance ◽  
Waste Cooking Oil ◽  
Gas Temperature ◽  
Compression Ignition Engine ◽  
Brake Thermal Efficiency ◽  
Acid Oil ◽  
Exhaust Gas Temperature

In this study, engine performance on thermal factors for different biodiesels has been studied and compared with diesel fuel. Biodiesels were produced from Pongamia pinnata (PP), Calophyllum inophyllum (CI), waste cooking oil (WCO), and acid oil. Depending on their free fatty acid content, they were subjected to the transesterification process to produce biodiesel. The main characterizations of density, calorific range, cloud, pour, flash and fire point followed by the viscosity of obtained biodiesels were conducted and compared with mineral diesel. The characterization results presented benefits near to standard diesel fuel. Then the proposed diesel engine was analyzed using four blends of higher concentrations of B50, B65, B80, and B100 to better substitute fuel for mineral diesel. For each blend, different biodiesels were compared, and the relative best performance of the biodiesel is concluded. This diesel engine was tested in terms of BSFC (brake-specific fuel consumption), BTE (brake thermal efficiency), and EGT (exhaust gas temperature) calculated with the obtained results. The B50 blend of acid oil provided the highest BTE compared to other biodiesels at all loads while B50 blend of WCO provided the lowest BSFC compared to other biodiesels, and B50 blends of all biodiesels provided a minimum % of the increase in EGT compared to diesel.

Impact of Diesel-Butanol-Waste Cooking Oil Biodiesel Blends on Stationary Diesel Engine Performance and Emission Characteristics

2020 ◽  
pp. 173-192
Author(s):  
H. Sharon ◽  
Joel Jackson R. ◽  
Prabha C.
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Specific Energy Consumption ◽  
Waste Cooking Oil ◽  
Nox Emission ◽  
Performance And Emission ◽  
Cooking Oil ◽  
Fuel Blends ◽  
Hydrocarbon Emission ◽  
Smoke Opacity

Feed stock cost and NOX emission are the major barriers for commercialization of biodiesel. Waste cooking oil is well identified as one of the cheapest feed stocks for biodiesel production. This chapter reduces NOX emission of waste cooking oil biodiesel. Test fuel blends are prepared by mixing diesel (20 to 50 v/v%), butanol (5 v/v%), and waste cooking oil biodiesel (45 to 75 v/v%). Fuel properties of waste cooking oil biodiesel are enhanced due to addition of diesel and butanol. Brake specific energy consumption of the blends is higher than diesel fuel. Harmful emissions like carbon monoxide, nitrous oxide, and smoke opacity are lower for blends than diesel fuel. Increasing biodiesel concentration in blend also reduces hydrocarbon emission to a significant extent. The obtained results justify the suitability of proposed cheap blends for diesel engine emission reduction.

ANALYSIS OF OXYGENATED COMPONENT (BUTYL ETHER) AND EGR EFFECT ON A DIESEL ENGINE

2010 ◽  
Vol 24 (15n16) ◽  
pp. 2844-2849 ◽  
Author(s):  
SEUNG-HUN CHOI ◽  
YOUNG-TAIG OH
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Specific Energy Consumption ◽  
Engine Performance ◽  
Nox Emission ◽  
Exhaust Emission ◽  
Engine Fuel ◽  
Butyl Ether ◽  
Significant Difference ◽  
Blended Fuel

Potential possibility of the butyl ether (BE, oxygenates of di-ether group) was analyzed as an additives for a naturally aspirated direct injection diesel engine fuel. Engine performance and exhaust emission characteristics were analyzed by applying the commercial diesel fuel and oxygenates additives blended diesel fuels. Smoke emission decreased approximately 26% by applying the blended fuel (diesel fuel 80 vol-% + BE 20vol-%) at the engine speed of 25,000 rpm and with full engine load compared to the diesel fuel. There was none significant difference between the blended fuel and the diesel fuel on the power, torque, and brake specific energy consumption rate of the diesel engine. But, NOx emission from the blended fuel was higher than the commercial diesel fuel. As a counter plan, the EGR method was employed to reduce the NOx . Simultaneous reduction of the smoke and the NOx emission from the diesel engine was achieved by applying the BE blended fuel and the cooled EGR method.

Analysis of Diesel Engine Performance Fueled with Waste Cooking Oil

2013 ◽  
Vol 465-466 ◽  
pp. 418-422
Author(s):  
Nur Atiqah Ramlan ◽  
Mohd Herzwan Hamzah ◽  
Nur Fauziah Jaharudin ◽  
Abdul Adam Abdullah ◽  
Rizalman Mamat
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Engine Speed ◽  
Engine Performance ◽  
Waste Cooking Oil ◽  
Constant Load ◽  
Biodiesel Production ◽  
Cylinder Pressure ◽  
Cooking Oil ◽  
Engine Power

Waste cooking oil (WCO) is one of the economical and easiest sources for biodiesel production. The use of WCO in diesel engine is sustainable if they can perform similarly to diesel fuel. Therefore, this paper presents the performance and combustion characteristics of a single cylinder diesel engine fueled with biodiesel from WCO and compared with diesel fuel. In this study, the WCO was blended with diesel fuel at 5% and 10% blending ratio and named as B5 and B10 respectively. The experiment has been conducted at variable engine speed, constant load and at compression ratios of 17.7. The performance parameters that have been analyzed in this experiment were engine power, torque and in-cylinder pressure. In the end, results show that the engine performance of B5 and B10 was slightly similar to diesel fuel and can be used as a diesels substitute.

Performance and Emission Study on Diesel Engine using Waste Cooking Oil with Methanol as Additive

2018 ◽  
Vol 10 (5) ◽  
Author(s):  
R.A. RaajKumar ◽  
S. Sriram ◽  
A.S. DivakarShetty ◽  
Sandeep Koundinya
Keyword(s):  
Diesel Engine ◽  
Fossil Fuels ◽  
Engine Performance ◽  
Fuel Mixture ◽  
Waste Cooking Oil ◽  
Emission Characteristics ◽  
Oxides Of Nitrogen ◽  
Performance And Emission ◽  
Cooking Oil ◽  
Emission Study

As the years are passing by, the number of vehicles used for transportation is increasing. Due to this the environment is degrading and also the fossil fuels are depleting. This paper presents the performance and emission study on diesel engine using waste cooking oil with methanol as additive in various proportions. The properties such as the flash point, fire point, kinematic viscosity and the calorific values of the blends with and without additive are determined. Then all the biodiesel blends are used as fuel separately in the diesel engine. The engine performance as well as emission characteristics have been determined and compared at different blends. The blends with additive showed better properties and reduction in emission characteristics compared to diesel. The emission of CO is decreasing with increasing waste cooking oil and methanol quantity in the blends. Fuel consumption was more for the higher percentage blends with respect to increasing brake power. The emission of un-burnt hydrocarbon and oxides of nitrogen are reduced significantly with addition of methanol to fuel mixture due to higher oxygen and heat of vaporization.

scholarly journals Performance Evaluation of Locally-Produced Waste Cooking Oil Biodiesel with Conventional Diesel Fuel

2018 ◽  
Vol 8 (6) ◽  
pp. 3521-3524
Author(s):  
A. A. Khaskheli ◽  
G. D. Walasai ◽  
A. S. Jamali ◽  
Q. B. Jamali ◽  
Z. A. Siyal ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
Fossil Fuels ◽  
Renewable Energy Sources ◽  
Waste Cooking Oil ◽  
Environmental Concerns ◽  
Local Market ◽  
Test Bed ◽  
Brake Thermal Efficiency ◽  
Cooking Oil ◽  
Conventional Diesel Fuel

Increasing environmental concerns forced us to look for cheaper, reliable and secure sources of energy. Fossil fuels like oil, coal, and natural gas are having limited supplies and are depleting fast. Both energy security and environmental concerns have resulted in inclination towards renewable energy sources. Biodiesel does not contain petroleum, but it can be blended with petro-diesel in various mix levels. This research investigated biodiesel produced by the use of cheap waste cooking oil, collected from the local market of Nawabshah, Pakistan. The collected waste oil was converted into biodiesel by trans-esterification process at PCSIR Laboratory, Karachi. The fuel samples were tested in a diesel engine test bed unit at the Thermodynamics Laboratory of Quaid-e-Awam University. Biodiesel blends were compared with the conventional diesel fuel. The comparative analysis of the performance parameters concluded that brake specific fuel consumption of B30 (biodiesel 30%+diesel 70%) mix was 6.9% higher than that of 100% diesel. The brake thermal efficiency of B30 decreased about 4.75% in comparison with conventional diesel.

The Effects of Storage Duration on Biodiesel Derived from Waste Cooking Oil

2014 ◽  
Vol 660 ◽  
pp. 386-390 ◽  
Author(s):  
Norazwan Azman ◽  
Mirnah Suardi ◽  
Amir Khalid
Keyword(s):  
Diesel Fuel ◽  
Fossil Fuels ◽  
Acid Value ◽  
Waste Cooking Oil ◽  
Biodiesel Fuel ◽  
Storage Duration ◽  
Fuel Prices ◽  
Cooking Oil ◽  
Impact Reduction ◽  
The Impact

The use of fossil fuels as energy sources has grown to significantly be likely to have a major environmental impact. Reduction of world oil reserves and increasing environmental concerns have prompted alternative is found and renewable source of energy called biodiesel. Biodiesel fuel from vegetable oil is considered as the best candidates for diesel fuel replacement in diesel engines because of its closer. Fuel prices are going up day by day in the world. Thus, the means and methods have been trying for years to get fuel alternative outcomes. This study investigated the effects of different storage periods used in quality biodiesel blends (B5, B10, B15) of waste cooking oil and diesel fuel under low temperature and the temperature of the environment. Biodiesel samples were stored in glass containers under indoor conditions, and outdoor conditions for 10 weeks in total. These samples were monitored on a weekly basis through the test properties. The experimental density, viscosity, acid value, water content and flash point discussed in detail. Biodiesel storage at low temperatures is suitable and more advantageous because the impact on the physical properties is minimal and beneficial to slow down the degradation of biodiesel and storage.

Sign in / Sign up

Export Citation Format

Share Document