scholarly journals Research on Fault Diagnosis of Air Conditioner Based on Deep Learning

2018 ◽  
Vol 2 (1) ◽  
pp. 18
Author(s):  
Zhiting Liu ◽  
Yuhua Wang ◽  
Yuexia Zhou
Keyword(s):  
Feature Extraction ◽  
Deep Learning ◽  
Fault Diagnosis ◽  
Unsupervised Learning ◽  
Supervised Learning ◽  
Vibration Signal ◽  
Learning Rate ◽  
Air Conditioner ◽  
Time Frequency ◽  
Mode Decomposition

The essence of intelligent fault diagnosis is to classify the feature of faults by machine learning. It is difficult and key to extract fault characteristics of signals efficiently. The general feature extraction methods include time frequency domain feature extraction, Empirical Mode Decomposition (EMD), Wavelet Transform and Variational Mode Decomposition (VMD). However, these methods require a certain prior experience and require reasonable analysis and processing of the signals. In this paper, in order to effectively extract the fault characteristics of the  air conditioner's vibration signal, the stacked automatic encoder (SAE) is used to extract the feature of  air conditioner’s vibration signal, and the Softmax function is used to identify the  air conditioner's working condition. The SAE performs unsupervised learning on the signal, and Softmax function performs supervised learning on the signal. The number of hidden layers and the number of hidden layer's nodes  are determined through experiments. The effects of learning rate, learning rate decay, regularization, dropout, and batch size on the correct rate of the model in supervised learning and unsupervised learning are analyzed. Thereby realizing the fault diagnosis of the air conditioner. The recognition correct rate of deep learning model reached 99.92\%. The deep learning fault diagnosis method proposed in this paper is compared with EMD and SVM, VMD and SVM two kind of fault diagnosis methods.

scholarly journals Intelligent Fault Diagnosis and Forecast of Time-Varying Bearing Based on Deep Learning VMD-DenseNet

Sensors ◽  
2021 ◽  
Vol 21 (22) ◽  
pp. 7467
Author(s):  
Shih-Lin Lin
Keyword(s):  
Feature Extraction ◽  
Deep Learning ◽  
Fault Diagnosis ◽  
Vibration Signal ◽  
Image Feature ◽  
Signal Acquisition ◽  
Time Varying ◽  
Intelligent Fault Diagnosis ◽  
Image Block ◽  
Wide Range

Rolling bearings are important in rotating machinery and equipment. This research proposes variational mode decomposition (VMD)-DenseNet to diagnose faults in bearings. The research feature involves analyzing the Hilbert spectrum through VMD whereby the vibration signal is converted into an image. Healthy and various faults show different characteristics on the image, thus there is no need to select features. Coupled with the lightweight network, DenseNet, for image classification and prediction. DenseNet is used to build a model of motor fault diagnosis; its structure is simple, and the calculation speed is fast. The method of using DenseNet for image feature learning can perform feature extraction on each image block of the image, providing full play to the advantages of deep learning to obtain accurate results. This research method is verified by the data of the time-varying bearing experimental device at the University of Ottawa. Through the four links of signal acquisition, feature extraction, fault identification, and prediction, a mechanical intelligent fault diagnosis system has established the state of bearing. The experimental results show that the method can accurately identify four common motor faults, with a VMD-DenseNet prediction accuracy rate of 92%. It provides a more effective method for bearing fault diagnosis and has a wide range of application prospects in fault diagnosis engineering. In the future, online and timely diagnosis can be achieved for intelligent fault diagnosis.

Enhanced deep residual network with multilevel correlation information for fault diagnosis of rotating machinery

2020 ◽  
pp. 107754632094971 ◽  
Author(s):  
Shoucong Xiong ◽  
Shuai He ◽  
Jianping Xuan ◽  
Qi Xia ◽  
Tielin Shi
Keyword(s):  
Deep Learning ◽  
Fault Diagnosis ◽  
Wavelet Packet ◽  
Learning Algorithms ◽  
Vibration Signal ◽  
Rolling Bearing ◽  
Classification Performance ◽  
Residual Network ◽  
Time Frequency ◽  
Correlation Information

Modern machinery becomes more precious with the advance of science, and fault diagnosis is vital for avoiding economical losses or casualties. Among massive diagnosis methods, deep learning algorithms stand out to open an era of intelligent fault diagnosis. Deep residual networks are the state-of-the-art deep learning models which can continuously improve performance by deepening the network structures. However, in vibration-based fault diagnosis, the transient property instability of vibration signal usually calls for time–frequency analysis methods, and the characters of time–frequency matrices are distinct from standard images, which brings some natural limitations for the diagnosis performance of deep learning algorithms. To handle this issue, an enhanced deep residual network named the multilevel correlation stack-deep residual network is proposed in this article. Wavelet packet transform is used to preprocess the sensor signal, and then the proposed multilevel correlation stack-deep residual network uses kernels with different shapes to fully dig various kinds of useful information from any local regions of the processed input. Experiments on two rolling bearing datasets are carried out. Test results show that the multilevel correlation stack-deep residual network exhibits a more satisfactory classification performance than original deep residual networks and other similar methods, revealing significant potentials for realistic fault diagnosis applications.

scholarly journals Intelligent Fault Diagnosis Method Using Acoustic Emission Signals for Bearings under Complex Working Conditions

2020 ◽  
Vol 10 (20) ◽  
pp. 7068
Author(s):  
Minh Tuan Pham ◽  
Jong-Myon Kim ◽  
Cheol Hong Kim
Keyword(s):  
Acoustic Emission ◽  
Feature Extraction ◽  
Deep Learning ◽  
Fault Diagnosis ◽  
Extraction Methods ◽  
High Accuracy ◽  
Time Frequency ◽  
Bearing Fault ◽  
Bearing Fault Diagnosis ◽  
Ae Signals

Recent convolutional neural network (CNN) models in image processing can be used as feature-extraction methods to achieve high accuracy as well as automatic processing in bearing fault diagnosis. The combination of deep learning methods with appropriate signal representation techniques has proven its efficiency compared with traditional algorithms. Vital electrical machines require a strict monitoring system, and the accuracy of these machines’ monitoring systems takes precedence over any other factors. In this paper, we propose a new method for diagnosing bearing faults under variable shaft speeds using acoustic emission (AE) signals. Our proposed method predicts not only bearing fault types but also the degradation level of bearings. In the proposed technique, AE signals acquired from bearings are represented by spectrograms to obtain as much information as possible in the time–frequency domain. Feature extraction and classification processes are performed by deep learning using EfficientNet and a stochastic line-search optimizer. According to our various experiments, the proposed method can provide high accuracy and robustness under noisy environments compared with existing AE-based bearing fault diagnosis methods.

scholarly journals A Strictly Unsupervised Deep Learning Method for HEp-2 Cell Image Classification

Sensors ◽  
2020 ◽  
Vol 20 (9) ◽  
pp. 2717
Author(s):  
Caleb Vununu ◽  
Suk-Hwan Lee ◽  
Ki-Ryong Kwon
Keyword(s):  
Feature Extraction ◽  
Deep Learning ◽  
Unsupervised Learning ◽  
Supervised Learning ◽  
Feature Learning ◽  
Automated Classification ◽  
Benchmark Datasets ◽  
Unsupervised Deep Learning ◽  
Latent Representations

Classifying the images that portray the Human Epithelial cells of type 2 (HEp-2) represents one of the most important steps in the diagnosis procedure of autoimmune diseases. Performing this classification manually represents an extremely complicated task due to the heterogeneity of these cellular images. Hence, an automated classification scheme appears to be necessary. However, the majority of the available methods prefer to utilize the supervised learning approach for this problem. The need for thousands of images labelled manually can represent a difficulty with this approach. The first contribution of this work is to demonstrate that classifying HEp-2 cell images can also be done using the unsupervised learning paradigm. Unlike the majority of the existing methods, we propose here a deep learning scheme that performs both the feature extraction and the cells’ discrimination through an end-to-end unsupervised paradigm. We propose the use of a deep convolutional autoencoder (DCAE) that performs feature extraction via an encoding–decoding scheme. At the same time, we embed in the network a clustering layer whose purpose is to automatically discriminate, during the feature learning process, the latent representations produced by the DCAE. Furthermore, we investigate how the quality of the network’s reconstruction can affect the quality of the produced representations. We have investigated the effectiveness of our method on some benchmark datasets and we demonstrate here that the unsupervised learning, when done properly, performs at the same level as the actual supervised learning-based state-of-the-art methods in terms of accuracy.

scholarly journals Application Research of a New Adaptive Noise Reduction Method in Fault Diagnosis

2020 ◽  
Vol 10 (15) ◽  
pp. 5078
Author(s):  
Wenxiao Guo ◽  
Ruiqin Li ◽  
Yanfei Kou ◽  
Jianwei Zhang
Keyword(s):  
Fault Diagnosis ◽  
Fault Simulation ◽  
Random Noise ◽  
Vibration Signal ◽  
Ensemble Empirical Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Time Frequency ◽  
Mode Decomposition ◽  
Reconstructed Signal ◽  
Mining Machinery

The feature extraction of composite fault of gearbox in mining machinery has always been a difficulty in the field of fault diagnosis. Especially in strong background noise, the frequency of each fault feature is different, so an adaptive time-frequency analysis method is urgently needed to extract different types of faults. Considering that the signal after complementary ensemble empirical mode decomposition (CEEMD) contains a lot of pseudo components, which further leads to misdiagnosis. The article proposes a new method for actively removing noise components. Firstly, the best scale factor of multi-scale sample entropy (MSE) is determined by signals with different signal to noise ratios (SNRs); secondly, the minimum value of a large number of random noise MSE is extracted and used as the threshold of CEEMD; then, the effective Intrinsic mode functions(IMFs) component is reconstructed, and the reconstructed signal is CEEMD decomposed again; finally, after multiple iterations, the MSE values of the component signal that are less than the threshold are obtained, and the iteration is terminated. The proposed method is applied to the composite fault simulation signal and mining machinery vibration signal, and the composite fault feature is accurately extracted.

scholarly journals Method for Fault Diagnosis of Temperature-Related MEMS Inertial Sensors by Combining Hilbert–Huang Transform and Deep Learning

Sensors ◽  
2020 ◽  
Vol 20 (19) ◽  
pp. 5633 ◽  
Author(s):  
Tong Gao ◽  
Wei Sheng ◽  
Mingliang Zhou ◽  
Bin Fang ◽  
Futing Luo ◽  
...  
Keyword(s):  
Deep Learning ◽  
Fault Diagnosis ◽  
Short Term Memory ◽  
Inertial Sensors ◽  
Fault Classification ◽  
Hilbert Huang Transform ◽  
Time Frequency ◽  
Mode Decomposition ◽  
Improved Performance ◽  
Micro Electromechanical System

In this paper, we propose a novel method for fault diagnosis in micro-electromechanical system (MEMS) inertial sensors using a bidirectional long short-term memory (BLSTM)-based Hilbert–Huang transform (HHT) and a convolutional neural network (CNN). First, the method for fault diagnosis of inertial sensors is formulated into an HHT-based deep learning problem. Second, we present a new BLSTM-based empirical mode decomposition (EMD) method for converting one-dimensional inertial data into two-dimensional Hilbert spectra. Finally, a CNN is used to perform fault classification tasks that use time–frequency HHT spectrums as input. According to our experimental results, significantly improved performance can be achieved, on average, for the proposed BLSTM-based EMD algorithm in terms of EMD computational efficiency compared with state-of-the-art algorithms. In addition, the proposed fault diagnosis method achieves high accuracy in fault classification.

scholarly journals Fault Diagnosis of a Hydraulic Pump Based on the CEEMD-STFT Time-Frequency Entropy Method and Multiclass SVM Classifier

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Wanlin Zhao ◽  
Zili Wang ◽  
Jian Ma ◽  
Lianfeng Li
Keyword(s):  
Feature Extraction ◽  
Fault Diagnosis ◽  
Entropy Method ◽  
Normal Operation ◽  
Support Vector ◽  
Svm Classifier ◽  
Hydraulic Pump ◽  
Time Frequency ◽  
Mode Decomposition ◽  
Mixing Problem

The fault diagnosis of hydraulic pumps is currently important and significant to ensure the normal operation of the entire hydraulic system. Considering the nonlinear characteristics of hydraulic-pump vibration signals and the mode mixing problem of the original Empirical Mode Decomposition (EMD) method, first, we use the Complete Ensemble EMD (CEEMD) method to decompose the signals. Second, the time-frequency analysis methods, which include the Short-Time Fourier Transform (STFT) and time-frequency entropy calculation, are applied to realize the robust feature extraction. Third, the multiclass Support Vector Machine (SVM) classifier is introduced to automatically classify the fault mode in this paper. An actual hydraulic-pump experiment demonstrates the procedure with a complete feature extraction and accurate mode classification.

scholarly journals Application of Xgboost Feature Extraction in Fault Diagnosis of Rolling Bearing

2020 ◽  
Vol 1 (2) ◽  
Author(s):  
Xingang WANG ◽  
Chao WANG
Keyword(s):  
Support Vector Machine ◽  
Feature Extraction ◽  
Fault Diagnosis ◽  
Frequency Domain ◽  
Time Domain ◽  
Vibration Signal ◽  
Rolling Bearing ◽  
Support Vector ◽  
Time Frequency ◽  
Diagnosis Accuracy

Due to the difficulty that excessive feature dimension in fault diagnosis of rolling bearing will lead to the decrease of classification accuracy, a fault diagnosis method based on Xgboost algorithm feature extraction is proposed. When the Xgboost algorithm classifies features, it generates an order of importance of the input features. The time domain features were extracted from the vibration signal of the rolling bearing, the time-frequency features were formed by the singular value of the modal components that were decomposed by the variational mode decomposition. Firstly, the extracted time domain and time-frequency domain features were input into the support vector machine respectively to observe the fault diagnosis accuracy. Then, Xgboost algorithm was used to rank the importance of features and got the accuracy of fault diagnosis. Finally, important features were extracted and the extracted features were input into the support vector machine to observe the fault diagnosis accuracy. The result shows that the fault diagnosis accuracy of rolling bearing is improved after important feature extraction in time domain and time-frequency domain by Xgboost.

scholarly journals Bearing Fault Classification Using Ensemble Empirical Mode Decomposition and Convolutional Neural Network

Electronics ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1248
Author(s):  
Rafia Nishat Toma ◽  
Cheol-Hong Kim ◽  
Jong-Myon Kim
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Empirical Mode Decomposition ◽  
Vibration Signal ◽  
Ensemble Empirical Mode Decomposition ◽  
Fault Classification ◽  
Original Signal ◽  
Time Frequency ◽  
Mode Decomposition ◽  
Reconstructed Signal

Condition monitoring is used to track the unavoidable phases of rolling element bearings in an induction motor (IM) to ensure reliable operation in domestic and industrial machinery. The convolutional neural network (CNN) has been used as an effective tool to recognize and classify multiple rolling bearing faults in recent times. Due to the nonlinear and nonstationary nature of vibration signals, it is quite difficult to achieve high classification accuracy when directly using the original signal as the input of a convolution neural network. To evaluate the fault characteristics, ensemble empirical mode decomposition (EEMD) is implemented to decompose the signal into multiple intrinsic mode functions (IMFs) in this work. Then, based on the kurtosis value, insignificant IMFs are filtered out and the original signal is reconstructed with the rest of the IMFs so that the reconstructed signal contains the fault characteristics. After that, the 1-D reconstructed vibration signal is converted into a 2-D image using a continuous wavelet transform with information from the damage frequency band. This also transfers the signal into a time-frequency domain and reduces the nonstationary effects of the vibration signal. Finally, the generated images of various fault conditions, which possess a discriminative pattern relative to the types of faults, are used to train an appropriate CNN model. Additionally, with the reconstructed signal, two different methods are used to create an image to compare with our proposed image creation approach. The vibration signal is collected from a self-designed testbed containing multiple bearings of different fault conditions. Two other conventional CNN architectures are compared with our proposed model. Based on the results obtained, it can be concluded that the image generated with fault signatures not only accurately classifies multiple faults with CNN but can also be considered as a reliable and stable method for the diagnosis of fault bearings.

Research on Roller Bearing with Fault Diagnosis Method Based on EMD and BP Neural Network

2014 ◽  
Vol 1014 ◽  
pp. 501-504 ◽  
Author(s):  
Shu Guo ◽  
You Cai Xu ◽  
Xin Shi Li ◽  
Ran Tao ◽  
Kun Li ◽  
...  
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Bp Neural Network ◽  
Roller Bearing ◽  
Vibration Signal ◽  
Classification Performance ◽  
Outer Race ◽  
Mode Decomposition ◽  
Diagnosis Method ◽  
Main Fault

In order to discover the fault with roller bearing in time, a new fault diagnosis method based on Empirical mode decomposition (EMD) and BP neural network is put forward in the paper. First, we get the fault signal through experiments. Then we use EMD to decompose the vibration signal into a series of single signals. We can extract main fault information from the single signals. The kurtosis coefficient of the single signals forms a feature vector which is used as the input data of the BP neural network. The trained BP neural network can be used for fault identification. Through analyzing, BP neural network can distinguish the fault into normal state, inner race fault, outer race fault. The results show that this method can gain very stable classification performance and good computational efficiency.

Sign in / Sign up

Export Citation Format

Share Document