scholarly journals Potassium and growth-promoting fungi improve the postharvest quality of grape tomato

2022 ◽  
Vol 43 (2) ◽  
pp. 675-692
Author(s):  
Deise Silva Castro Pimentel Cardoso Cardoso ◽  
◽  
Herminia Emilia Prieto Martinez ◽  
Ariana Mota Pereira ◽  
Maria Catarina Megumi Kasuya ◽  
...  
Keyword(s):  
Vitamin C ◽  
Titratable Acidity ◽  
Fruit Production ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Tomato Plants ◽  
Randomized Design ◽  
Growth Promoting ◽  
Low K

Tomato plants respond well to potassium fertilization, whose insufficiency leads to a drop in fruit production and quality. On the other hand, the association of growth-promoting fungi (GPF) with roots has been shown to be able to optimize nutrient absorption, which implies lower financial costs and a decreased risk of loss of K applied to the soil. The objective of this study was to investigate the effects of inoculation with GPF and K rates on the postharvest quality of grape tomato hybrid ‘Mascot’ grown in a hydroponic system. The plants were cultivated in a hydroponic drip system using washed and sterilized sand as substrate. They were trained with two stems, leaving three bunches per stem. The experiment was carried out in a splitsplit-plot arrangement in a completely randomized design with three replicates. Ripe fruits were stored for 30 days in PET containers in storage chambers at a temperature of 25 °C. After 0, 10, 20 and 30 days of storage, five fruits were collected to determine the titratable acidity (TA) and soluble solids (SS), reducing sugars (RS) and vitamin C contents. The K rates provided an increase in the quality attributes. At low K rates, inoculation with GPF led to higher TA, SS, RS and vitamin C values. Inoculation of the plants with GPF improved the postharvest preservation of the fruits, especially when the plants underwent nutritional stress during cultivation.

scholarly journals Postharvest quality of tomato as affected by nitrogen and sulfur interaction

2020 ◽  
Vol 69 (2) ◽  
pp. 130-135
Author(s):  
Matias Siueia Júnior ◽  
Maria Ligia de Souza Silva ◽  
Anderson Ricardo Trevizam ◽  
Valdemar Faquin ◽  
Deivisson Ferreira da Silva
Keyword(s):  
Vitamin C ◽  
Fruit Quality ◽  
Tomato Fruit ◽  
Beta Carotene ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Solanum Lycopersicum L ◽  
Randomized Design

Nitrogen (N) and sulfur (S) are nutrients that, in addition to influencing plant growth and production, interfere with processes related to postharvest fruit quality. In the present study, N x S interaction was evaluated in the postharvest quality of tomato (Solanum lycopersicum L.). The experiment was conducted in a greenhouse using 5 dm3 capacity vessels containing a 0-20 cm layer of a dystropherric Red Latosol. A 5 x 3 factorial design was used, with combinations of five doses of N (0, 100, 200, 300 and 400 mg dm-3) and three doses of S (0, 60 and 120 mg dm-3) distributed in a completely randomized design, with four repetitions. After harvest, the attributes of fruit quality were evaluated: firmness, pH, soluble solids (SS), titratable acidity (AT), soluble solids ratio and titratable acidity (SS / AT), vitamin C, lycopene and beta-carotene. An increase in firmness was observed, as well as the content of soluble solids, titratable acidity and the SS / AT ratio of the fruits as a result of the interaction N x S. However, this interaction favoured the reduction of the contents of vitamin C, lycopene and beta-carotene, and the quality characteristics of tomato fruit in relation to the recommended values. Only the increasing doses of N favoured a higher pH in the tomato fruits.

scholarly journals Postharvest Quality of Tommy Atkins Mangoes Coated With Cassava Starch and Chitosan-Based Coatings

2018 ◽  
Vol 10 (11) ◽  
pp. 401
Author(s):  
T. A. Oliveira ◽  
C. A. Paiva ◽  
A. C. Silva ◽  
L. V. Nascimento ◽  
R. H. L. Leite ◽  
...  
Keyword(s):  
Weight Loss ◽  
Reducing Sugars ◽  
Soluble Sugars ◽  
Titratable Acidity ◽  
Cassava Starch ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Total Soluble Sugars ◽  
Randomized Design

This study aimed to evaluate postharvest quality of Tommy Atkins mangoes treated with starch cassava and chitosan based coatings. Mango fruits were collected at physiological maturity. After cleaning, weighing and identification, fruits were submitted to the respective treatments and stored for 35 days in the Laboratório de Tecnologia de Alimentos, with weekly evaluations under refrigeration 13±1 ºC and 90±5% RH. The experiment was conducted in a completely randomized design, in factorial scheme with four treatments: control, cassava starch (CS), chitosan (CH), and cassava starch/chitosan (CS/CH) at a concentration of 2%, and six storage periods (0, 7, 14, 21, 28 and 35 days) with four replications. Fruits were evaluated in: appearance, weight loss, external color: luminosity and ΔE, pulp firmness, titratable acidity, soluble solids content, starch, total soluble sugars, reducing sugars and sucrose. Data were submitted to analysis of variance using SISVAR software and compared by Scott-Knott test at 5% of probability. It was observed a reduction in appearance, pulp firmness, titratable acidity, starch and reducing sugars and increase in weight loss, luminosity, ΔE, soluble solids, total soluble sugars and non-reducing sugars during storage. CS/CH coated fruits reported higher notes of appearance, lower weight loss and maintained color. Quality of physicochemical attributes: soluble solids, starch, total soluble sugars, reducing sugars and non-reducing sugars were strongly retarded.

scholarly journals Influence of the main stem pruning and fruit thinning on quality of melon

Revista CERES ◽  
2016 ◽  
Vol 63 (6) ◽  
pp. 789-795
Author(s):  
Rafaella Martins de Araújo Ferreira ◽  
Edna Maria Mendes Aroucha ◽  
Cristiane Alves de Paiva ◽  
José Francismar de Medeiros ◽  
Flavinicíus Pereira Barreto
Keyword(s):  
Vitamin C ◽  
Management Practices ◽  
Fruit Size ◽  
Titratable Acidity ◽  
Main Stem ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Fruit Thinning ◽  
Flesh Firmness

ABSTRACT Among many management practices used in melon crops, those that change source: sink relationship, such as pruning and fruit thinning, directly influence production, affect fruit size and its composition, including sugar and vitamin contents. The objective of this study was to evaluate the influence of pruning of the main stem and time of fruit thinning in melon postharvest quality. Thus, two experiments were set up in Mossoró, state of Rio Grande do Norte, each with a melon hybrid (Amaregal and Banzai). Each experiment was conducted in a randomized block, in a (2 x 4) + 1 factorial design, 2 pruning management (with and without pruning), 4 levels of fruit thinning (3, 6, 9 and 12 DARB - days after removal agro textile blanket) and a control (without pruning and thinning), and four replications. Fruits were harvested at commercial maturity and transported to the Laboratory of Food Technology of UFERSA, where they were evaluated for the following characteristics: weight, diameter, length, flesh thickness, flesh firmness, soluble solids, pH, and titratable acidity, soluble solids: titratable acidity ratio and vitamin C. No interaction between factors in any of the experiments was found. Titratable acidity (0.077%) and vitamin C content (3.4 mg/100 g) in Amaregal melon and soluble solids (10.2%) in Banzai melon were lower in the treatments with stem pruning. In Amaregal melon, fruits showed longer length (134 mm) and greater flesh firmness (40 N) when thinning was carried out on 6 DARB, and as thinning was delayed, it found a decrease in the values of soluble solids, SS: TA ratio and pH. In Banzai melon, fruits showed greater flesh thickness (33.5 mm) and SS: TA (247.5) ratio when thinning was carried out on 6 DARB. However, delay in thinning promoted an increase in pH and vitamin C content of the fruits. Pruning of the main stem and thinning season had effect on the quality of Amaregal and Banzai melons in different ways.

scholarly journals Phenology, yield and fruit quality of 'Paluma' guava tree at different pruning times

2016 ◽  
Vol 40 (3) ◽  
pp. 317-325 ◽  
Author(s):  
Marlon Jocimar Rodrigues da Silva ◽  
Marco Antonio Tecchio ◽  
Sofia Domiciano ◽  
Sarita Leonel ◽  
Rodrigo Issa Balestrero
Keyword(s):  
Fruit Quality ◽  
Titratable Acidity ◽  
Fruit Production ◽  
Soluble Solids ◽  
Management Tool ◽  
Fixation Index ◽  
Core Mass ◽  
Randomized Design ◽  
Longitudinal Diameter

ABSTRACT Pruning guava trees at different times is an important management tool that allows year-long staggering of fruit production. In this context, this study aimed to evaluate the phenological characteristics, yield and fruit quality of the 'Paluma' guava tree at different pruning times in Botucatu, SP. The study used a completely randomized design with four treatments, four replicates and a useful experimental plot plant. The treatments consisted of four different pruning times, August 27, September 11, September 26 and October 11. The following phenological phases were evaluated: branch establishment, flowering, early fruiting, fruit ripening and harvesting. It was determined the number of flower buds, fixed fruits and fixation index fruit were determined. The fruit growth curve was obtained by measuring the transverse and longitudinal diameter. At the time of harvest, the number of fruits per plant, yield and productivity were measured. In the harvested fruits, the fresh mass, the transverse and longitudinal diameter, the flesh and core thickness, the flesh and core mass, soluble solids, titratable acidity and pH were determined. The 'Paluma' guava trees pruned in August showed higher phenological stage durations than the other pruning times; however, those pruned in early September showed higher fixation index fruit, fruit yield and better physical characteristics. The guava trees pruned in August showed lower titratable acidity values and higher soluble solids/titratable acidity ratio.

scholarly journals Postharvest Quality of Beetroots Grown Under Different Irrigation Depths and Ascorbic Acid Doses

2019 ◽  
Vol 11 (16) ◽  
pp. 180
Author(s):  
Anderson Carlos de Melo Gonçalves ◽  
Toshik Iarley da Silva ◽  
José Sebastião de Melo Filho ◽  
Joana Gomes de Moura ◽  
Leonardo Vieira de Sousa ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Ascorbic Acid ◽  
Polynomial Regression ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Mineral Matter ◽  
Total Soluble Solids ◽  
Randomized Design

Beetroot (Beta vulgaris L.) is a culture of great demand in Brazil due to its high nutritional value. However, water availability is a determining factor on its production. An alternative to reduce the damage caused by water stress is to apply organic solutes, such as ascorbic acid. The purpose hereof was to evaluate the postharvest quality of beetroots grown under different irrigation depths and ascorbic acid doses. The experiment was carried out in the Human, Social, and Agricultural Center’s Postharvest Physiology and Technology Laboratory of the Federal University of Paraíba, Bananeiras, Paraíba, Brazil, in a completely randomized design with five doses of ascorbic acid (0.00, 0.29, 1.00, 1.71, and 2.00 mM) and five irrigation depths (40.0%, 51.6%, 80.0%, 108.4%, and 120.0% of the evapotranspiration), combined according to each Box Central Compound experimental matrix, totaling nine treatments with five repetitions. The variables total soluble solids, electrical conductivity, hydrogenation potential, titratable acidity, total soluble solids and titratable acidity ratio, moisture, dry matter, and mineral matter were evaluated. The data were submitted for analysis of variance and polynomial regression. There was a significant interaction between the irrigation depths and the ascorbic acid doses in every variable, except for electrical conductivity and mineral matter. The postharvest characteristics of beetroots improved with applications of ascorbic acid doses in the thinner irrigation depths. The greatest dose of ascorbic acid (2 mM) in the thinner irrigation depth (40%) increases the postharvest quality of beet tuberous roots.

scholarly journals QUALITY OF ACEROLA (Malpighia emarginata) TREATED WITH GIBBERELIC ACID AND STORED UNDER REFRIGERATION

2017 ◽  
Vol 39 (4) ◽  
Author(s):  
KELLINA OLIVEIRA DE SOUZA ◽  
CARLOS FARLEY HERBSTER MOURA ◽  
MÔNICA MARIA DE ALMEIDA LOPES ◽  
MARCELA CRISTINA RABELO ◽  
MARIA RAQUEL ALCÂNTARA DE MIRANDA
Keyword(s):  
Vitamin C ◽  
Skin Color ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Red Color ◽  
Malpighia Emarginata ◽  
Gibberelic Acid ◽  
Control Water

ABSTRACT The goal of this study was study the postharvest quality of acerola clone BRS 236 (Malpighia emarginata D.C.) which was harvested at physiological maturity and submitted to four treatments under immersion during 5 minutes at 25 °C, which are: control (water), 60 mg L-1; 120 mg L-1 and 180 mg L-1. After treatment the fruits were packed in polystyrene trays and placed with polyethylene film and then stored at 10 ± 2 °C and 85 ± 5% RH for 12 days. Were analyzed in three days intervals (0, 3, 6, 9 and 12 days): skin color, firmness, pH, titratable acidity, soluble solids, SS/TA ratio, vitamin C and yellow flavonoids. Vitamin C, anthocyanins and yellow flavonoids were not influenced by treatments with GA3 at the end of 12-day of cold storage at 10 ºC. The exogenous application of 120 mg L-1 of GA3 resulted in retention of red color and content of anthocyanins of acerola fruits BRS 236 clone 12-day storage at 10 °C.

scholarly journals Physicochemical and enzimatic transformations of "eva" apples stored under modified atmosphere

2014 ◽  
Vol 38 (4) ◽  
pp. 375-381
Author(s):  
Ariela Betsy Thomas ◽  
Caroline Roberta Freitas Pires ◽  
Luiz Carlos de Oliveira Lima
Keyword(s):  
Titratable Acidity ◽  
Soluble Solids ◽  
Low Density Polyethylene ◽  
Postharvest Quality ◽  
Experimental Unit ◽  
Modified Atmosphere ◽  
Low Density ◽  
Randomized Design ◽  
The City

The need for a permanent market supply of fresh fruit has generated great interest in postharvest techniques that can promote useful life and quality of the fruit. The aim of this study was to evaluate the efficiency of atmospheric modification using different polymeric films in maintaining postharvest quality and prolonging the shelf life of Eva (Mallus sp) apples. For this, fruits from the city of Barbacena - MG, selected and sanitized were packed in plastic trays and wrapped in the corresponding films. The films used were: polypropylene - 20 µm, low-density polyethylene - 14 µm and high-density polyethylene - 7 µm. Another group of fruits (control) was not submitted to a modified atmosphere. Subsequently, all the the packages were stored under refrigeration (0 ° C ± 0.5) for 210 days and the evaluations of the following variables were performed every 30 days of storage: hydrogen potential (pH), titratable acidity, soluble solids, weight loss, firmness, total pectin, soluble pectin, pectin methyl esterase and polygalacturonase. The work was conducted in a completely randomized design (4x8), with 4 treatments and 8 experimental times. Each treatment consisted of three replicates and each experimental unit consisted of six fruits. The results were submitted to variance analysis and means were compared by the Tukey test at 5% probability and regression analysis. The low density polyethylene (14 µm) packaging provided the best conservation of the Eva cultivar apple textural characteristics.

scholarly journals PRODUCTION, PHYSICAL-CHEMICAL QUALITY AND BIOATIVE COMPOUNDS OF MISTY BLUEBERRY FRUIT UNDER DIFFERENT PRUNING INTENSITIES

2017 ◽  
Vol 39 (spe) ◽  
Author(s):  
GISELY CORREA DE MOURA ◽  
◽  
MARCIA VIZZOTTO ◽  
LUCIANO PICOLOTTO ◽  
LUIS EDUARDO CORRÊA ANTUNES ◽  
...  
Keyword(s):  
Fruit Size ◽  
Titratable Acidity ◽  
Fruit Production ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Yield And Quality ◽  
Physical Chemical ◽  
Total Titratable Acidity ◽  
Phytochemical Compounds

ABSTRACT The objective of this study was to evaluate the effect of pruning intensity on yield and quality of blueberries fruits. It was evaluated the cultivar Misty. The treatments were: absence of pruning; light pruning; regular pruning and drastic pruning. The experimental design was randomized blocks with four replications. The variables analyzed were fruit production, fruit size, pH, total soluble solids (TSS) and total titratable acidity (TTA), and the bioactive compounds such as phenolic compounds, anthocyanins and antioxidant activity. The plants that received drastic pruning showed higher averages of production and fruit size. The highest concentrations of phytochemical compounds in blueberry fruits occurred as pruning was more drastic. The use of different intensity of pruning can modify the productive behavior and postharvest quality of fruits.

scholarly journals PRODUCTION, PHYSICAL-CHEMICAL QUALITY AND BIOATIVE COMPOUNDS OF MISTY BLUEBERRY FRUIT UNDER DIFFERENT PRUNING INTENSITIES

2017 ◽  
Vol 39 (spe) ◽  
Author(s):  
GISELY CORREA DE MOURA ◽  
MARCIA VIZZOTTO ◽  
LUCIANO PICOLOTTO ◽  
LUIS EDUARDO CORRÊA ANTUNES
Keyword(s):  
Fruit Size ◽  
Titratable Acidity ◽  
Fruit Production ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Yield And Quality ◽  
Physical Chemical ◽  
Total Titratable Acidity ◽  
Phytochemical Compounds

ABSTRACT The objective of this study was to evaluate the effect of pruning intensity on yield and quality of blueberries fruits. It was evaluated the cultivar Misty. The treatments were: absence of pruning; light pruning; regular pruning and drastic pruning. The experimental design was randomized blocks with four replications. The variables analyzed were fruit production, fruit size, pH, total soluble solids (TSS) and total titratable acidity (TTA), and the bioactive compounds such as phenolic compounds, anthocyanins and antioxidant activity. The plants that received drastic pruning showed higher averages of production and fruit size. The highest concentrations of phytochemical compounds in blueberry fruits occurred as pruning was more drastic. The use of different intensity of pruning can modify the productive behavior and postharvest quality of fruits.

Effect of Preharvest Application of Silicon and Saline Water on Postharvest Quality of Beet (Beta vulgaris L.)

2019 ◽  
pp. 1-9
Author(s):  
José Sebastião de Melo Filho ◽  
Toshik Iarley da Silva ◽  
Ygor Henrique Leal ◽  
Ana Gabriela Sousa Basilio ◽  
Mário Leno Martins Véras ◽  
...  
Keyword(s):  
Irrigation Water ◽  
Saline Water ◽  
Titratable Acidity ◽  
Dry Mass ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Total Soluble Solids ◽  
Randomized Design ◽  
Saline Waters

Beet is one of the vegetables richest in nutrient (bioactive compounds, folic acid and potassium). However, there are few studies on postharvest quality from the crop under irrigation conditions with saline waters, and because of that, the objective of this study was to evaluate effect of saline waters and silicon application in the preharvest on physicochemical quality of the beet. Two experiments were conducted with the objective of evaluating two forms of silicon application: via foliar (experiment 1) and via soil (experiment 2) about its influence in mitigating salt stress. In both experiments was adopted a randomized design with blocks in a 5 x 5 factorial, referring to five levels of electrical conductivity of the irrigation water (ECw): (0.5, 1.3, 3.25, 5.2 and 6.0 dS m-1) five doses of silicon (0.00; 2.64; 9.08; 15.52 and 18.16 mL L-1), they were combined according to the experimental matrix Central composite of Box totaling 10 treatments, with four replicates and three plants per plot. After harvesting, 70 days after transplanting, the following characteristics were evaluated: bulb dry mass, pH, titratable acidity (TA), total soluble solids (TSS), TSS/TA ratio and ash.  There was a significant effect for the salinity x silicon (Si) interaction applied via soil to the dry matter mass and titratable acidity. The electrical conductivities of irrigation water (ECw) and Si doses via leaf and soil influenced significantly for analyzed variables, except pH, total soluble solids, TSS/TA ratio, ash and titratable acidity, which were not influenced by ECw and nor by the doses of Si via soil and foliage. Irrigation with water of 6.0 dS m-1 promotes better quality beet tuber. The fertilization on preharvest with silicon via soil or foliage improved postharvest quality of beet.

Sign in / Sign up

Export Citation Format

Share Document