Composition of Alloy of Taurian Chersonesos Silver Coins

2021 ◽  
pp. 107-115
Author(s):  
Tatiana Smekalova ◽  
◽  
Natalia Demidenko ◽  
◽  
Keyword(s):  
Fluorescence Spectroscopy ◽  
Alloy Composition ◽  
The State ◽  
Controversial Issue ◽  
Complete Picture ◽  
X Ray

The paper offers the first complete picture of the changing in the alloy composition of silver coins of the ancient Tauric Chersonesos. Coins from two largest collections were examined: the State Hermitage and the State Historical and Archaeological Museum-Reserve “Tauric Chersonesos”. In total, about 190 Chersonesean silver coins were studied by X-ray fluorescence spectroscopy. The results obtained made it possible to determine the stages of functioning of fool metallic value silver coins and to reveal the time of their transformation into conventional or credit coins. This happened at the end of the autonomous period of Chersonesos, after which silver coins were no longer minted in Chersonesos, with the exception of an episodic and controversial issue during the period of the influence of Mithridates VI.

Chemical partitioning of elements in Ni-base MC-carbide reinforced eutetic superalloys

1983 ◽  
Vol 41 ◽  
pp. 250-251
Author(s):  
E. F. Koch ◽  
E. L. Hall ◽  
S. W. Yang
Keyword(s):  
Alloy Composition ◽  
Volume Fraction ◽  
Lattice Mismatch ◽  
Turbine Blades ◽  
Eutectic Alloys ◽  
Alloy Matrix ◽  
X Ray ◽  
Gas Turbine Blades ◽  
Analytical Electron ◽  
Analytical Electron Microscope

The plane-front solidified eutectic alloys consisting of aligned tantalum monocarbide fibers in a nickel alloy matrix are currently under consideration for future aircraft and gas turbine blades. The MC fibers provide exceptional strength at high temperatures. In these alloys, the Ni matrix is strengthened by the precipitation of the coherent γ' phase (ordered L12 structure, nominally Ni3Al). The mechanical strength of these materials can be sensitively affected by overall alloy composition, and these strength variations can be due to several factors, including changes in solid solution strength of the γ matrix, changes in they γ' size or morphology, changes in the γ-γ' lattice mismatch or interfacial energy, or changes in the MC morphology, volume fraction, thermal stability, and stoichiometry. In order to differentiate between these various mechanisms, it is necessary to determine the partitioning of elemental additions between the γ,γ', and MC phases. This paper describes the results of such a study using energy dispersive X-ray spectroscopy in the analytical electron microscope.

scholarly journals Non-Invasive Technical Investigation of English Portrait Miniatures Attributed to Nicholas Hilliard and Isaac Oliver

Heritage ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 1165-1181
Author(s):  
Flavia Fiorillo ◽  
Lucia Burgio ◽  
Christine Slottved Kimbriel ◽  
Paola Ricciardi
Keyword(s):  
Fluorescence Spectroscopy ◽  
Scientific Methodology ◽  
Small Scale ◽  
Artistic Practice ◽  
X Ray ◽  
Non Invasive ◽  
Miniature Painting ◽  
Entire Career ◽  
Similarities And Differences ◽  
Victoria And Albert Museum

This study presents the results of the technical investigation carried out on several English portrait miniatures painted in the 16th and 17th century by Nicholas Hilliard and Isaac Oliver, two of the most famous limners working at the Tudor and Stuart courts. The 23 objects chosen for the analysis, spanning almost the entire career of the two artists, belong to the collections of the Victoria and Albert Museum (London) and the Fitzwilliam Museum (Cambridge). A non-invasive scientific methodology, comprising of stereo and optical microscopies, Raman microscopy, and X-ray fluorescence spectroscopy, was required for the investigation of these small-scale and fragile objects. The palettes and working techniques of the two artists were characterised, focusing in particular on the examination of flesh tones, mouths, and eyes. These findings were also compared to the information written in the treatises on miniature painting circulating during the artists’ lifetime. By identifying the materials and techniques most widely employed by the two artists, this study provides information about similarities and differences in their working methods, which can help to understand their artistic practice as well as contribute to matters of attribution.

scholarly journals Possible Pitfalls in the Analysis of Minerals and Loose Materials by Portable XRF, and How to Overcome Them

Minerals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 33
Author(s):  
Valérie Laperche ◽  
Bruno Lemière
Keyword(s):  
Fluorescence Spectroscopy ◽  
Laboratory Data ◽  
Data Sets ◽  
Light Elements ◽  
Portable Xrf ◽  
X Ray ◽  
Protective Films ◽  
The Matrix ◽  
Valuable Complement ◽  
Physical Effects

Portable X-ray fluorescence spectroscopy is now widely used in almost any field of geoscience. Handheld XRF analysers are easy to use, and results are available in almost real time anywhere. However, the results do not always match laboratory analyses, and this may deter users. Rather than analytical issues, the bias often results from sample preparation differences. Instrument setup and analysis conditions need to be fully understood to avoid reporting erroneous results. The technique’s limitations must be kept in mind. We describe a number of issues and potential pitfalls observed from our experience and described in the literature. This includes the analytical mode and parameters; protective films; sample geometry and density, especially for light elements; analytical interferences between elements; physical effects of the matrix and sample condition, and more. Nevertheless, portable X-ray fluorescence spectroscopy (pXRF) results gathered with sufficient care by experienced users are both precise and reliable, if not fully accurate, and they can constitute robust data sets. Rather than being a substitute for laboratory analyses, pXRF measurements are a valuable complement to those. pXRF improves the quality and relevance of laboratory data sets.

scholarly journals Inverse Design of Fe-Based Bulk Metallic Glasses Using Machine Learning

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 729
Author(s):  
Junhyub Jeon ◽  
Namhyuk Seo ◽  
Hwi-Jun Kim ◽  
Min-Ha Lee ◽  
Hyun-Kyu Lim ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Metallic Glasses ◽  
Alloy Composition ◽  
Relevant Literature ◽  
Bulk Metallic Glasses ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ann Models ◽  
Wide Scale ◽  
Artificial Neural Network Ann

Fe-based bulk metallic glasses (BMGs) are a unique class of materials that are attracting attention in a wide variety of applications owing to their physical properties. Several studies have investigated and designed the relationships between alloy composition and thermal properties of BMGs using an artificial neural network (ANN). The limitation of the wide-scale use of these models is that the required composition is yet to be found despite numerous case studies. To address this issue, we trained an ANN to design Fe-based BMGs that predict the thermal properties. Models were trained using only the composition of the alloy as input and were created from a database of more than 150 experimental data of Fe-based BMGs from relevant literature. We adopted these ANN models to design BMGs with thermal properties to satisfy the intended purpose using particle swarm optimization. A melt spinner was employed to fabricate the designed alloys. X-ray diffraction and differential thermal analysis tests were used to evaluate the specimens.

Revealing the structural transformation of rutile RuO2via in situ X-ray absorption spectroscopy during the oxygen evolution reaction

2019 ◽  
Vol 48 (21) ◽  
pp. 7122-7129 ◽  
Author(s):  
Chia-Jui Chang ◽  
You-Chiuan Chu ◽  
Hao-Yu Yan ◽  
Yen-Fa Liao ◽  
Hao Ming Chen
Keyword(s):  
Oxygen Evolution ◽  
Structural Transformation ◽  
Absorption Spectroscopy ◽  
Oxygen Evolution Reaction ◽  
The State ◽  
X Ray ◽  
Alkaline Conditions ◽  
X Ray Absorption ◽  
State Of Art

The state-of-art RuO2 catalyst for the oxygen evolution reaction (OER) is measured by using in situ X-ray absorption spectroscopy (XAS) to elucidate the structural transformation during catalyzing the reaction in acidic and alkaline conditions.

Suitability of the Compton-to-Rayleigh ratio in X-ray fluorescence spectroscopy: hydroxyapatite-based materials characterization

2019 ◽  
Vol 34 (5) ◽  
pp. 854-859 ◽  
Author(s):  
Sofia Pessanha ◽  
Sara Silva ◽  
Luís Martins ◽  
José Paulo Santos ◽  
João M. Silveira
Keyword(s):  
Fluorescence Spectroscopy ◽  
Materials Characterization ◽  
X Ray

In this work, we established a methodology for the analysis and characterization of hydroxyapatite-based materials using X-ray fluorescence.

Sign in / Sign up

Export Citation Format

Share Document